Hi Simon,
thanks a lot for your patch. I have just applied and tested it with the
NanoPC-T2 board (is similar to the NanoPi2-board and therefore
s5p4418_nanopi2_defconfig can be used). Unfortunately the bootl-cmd is
not working out of the box:
nanopi2# bootl
FDT and ATAGS support not compiled in - hanging
### ERROR ### Please RESET the board ###
Therefore my suggestion is to remove cmd_boot_linux.c since the
bootl-cmd is not required (friendlyARM's LUbuntu is booted by the
bootz-cmd).
Regards
Stefan
On 16.01.21 22:54, Simon Glass wrote:
This code is still using the old command typedef. It was not noticed since
this file is not currently built. It is using a non-existent option in the
Makefile.
Fix it up and add it to the build.
(This is offered as an act of service in the hope of receiving a free
beer at some point.)
Signed-off-by: Simon Glass
---
arch/arm/mach-nexell/Makefile | 2 +-
arch/arm/mach-nexell/cmd_boot_linux.c | 14 --
2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-nexell/Makefile b/arch/arm/mach-nexell/Makefile
index 10b3963ed10..8113624cac3 100644
--- a/arch/arm/mach-nexell/Makefile
+++ b/arch/arm/mach-nexell/Makefile
@@ -10,4 +10,4 @@ obj-y += nx_gpio.o
obj-y += tieoff.o
obj-$(CONFIG_ARCH_S5P4418)+= reg-call.o
obj-$(CONFIG_ARCH_S5P4418)+= nx_sec_reg.o
-obj-$(CONFIG_CMD_BOOTL)+= cmd_boot_linux.o
+obj-y += cmd_boot_linux.o
diff --git a/arch/arm/mach-nexell/cmd_boot_linux.c
b/arch/arm/mach-nexell/cmd_boot_linux.c
index f2dedfe1625..730550cd389 100644
--- a/arch/arm/mach-nexell/cmd_boot_linux.c
+++ b/arch/arm/mach-nexell/cmd_boot_linux.c
@@ -5,11 +5,13 @@
*/
#include
+#include
#include
#include
-#include
+#include
#include
#include
+#include
#include
#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_CLI_FRAMEWORK)
@@ -18,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR;
static bootm_headers_t linux_images;
-static void boot_go_set_os(cmd_tbl_t *cmdtp, int flag, int argc,
+static void boot_go_set_os(struct cmd_tbl *cmdtp, int flag, int argc,
char * const argv[],
bootm_headers_t *images)
{
@@ -66,8 +68,8 @@ static void boot_start_lmb(bootm_headers_t *images)
lmb_init(>lmb);
- mem_start = getenv_bootm_low();
- mem_size = getenv_bootm_size();
+ mem_start = env_get_bootm_low();
+ mem_size = env_get_bootm_size();
lmb_add(>lmb, (phys_addr_t)mem_start, mem_size);
@@ -79,7 +81,7 @@ static void boot_start_lmb(bootm_headers_t *images)
static inline void boot_start_lmb(bootm_headers_t *images) { }
#endif
-int do_boot_linux(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_boot_linux(struct cmd_tbl *cmdtp, int flag, int argc, char * const
argv[])
{
boot_os_fn *boot_fn;
bootm_headers_t *images = _images;
@@ -126,7 +128,7 @@ U_BOOT_CMD(bootl, CONFIG_SYS_MAXARGS, 1, do_boot_linux,
#endif
#if defined(CONFIG_CMD_BOOTD) && !defined(CONFIG_CMD_BOOTM)
-int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_bootd(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
{
return run_command(env_get("bootcmd"), flag);
}
