[PATCH 4/7] spi: zynqmp_gqspi: Fix tap delay values

[Ashok Reddy Soma]

From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>

There is no need of read modify write for tapdelay settings
ans hence remove the read operations while setting tapdelays.
Also, correct tapdelay value settings at 40MHZ by modifying
the if check to <= instead of <.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>
Signed-off-by: Ashok Reddy Soma <ashok.reddy.s...@xilinx.com>
---

 drivers/spi/zynqmp_gqspi.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c
index ae7b70aa57..136c20f09e 100644
--- a/drivers/spi/zynqmp_gqspi.c
+++ b/drivers/spi/zynqmp_gqspi.c
@@ -282,24 +282,19 @@ void zynqmp_qspi_set_tapdelay(struct udevice *bus, u32 
baudrateval)
        debug("%s, req_hz:%d, clk_rate:%d, baudrateval:%d\n",
              __func__, reqhz, clk_rate, baudrateval);

-       if (reqhz < GQSPI_FREQ_40MHZ) {
-               zynqmp_mmio_read(IOU_TAPDLY_BYPASS_OFST, &tapdlybypass);
-               tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE <<
-                               TAP_DLY_BYPASS_LQSPI_RX_SHIFT);
+       if (reqhz <= GQSPI_FREQ_40MHZ) {
+               tapdlybypass = TAP_DLY_BYPASS_LQSPI_RX_VALUE <<
+                               TAP_DLY_BYPASS_LQSPI_RX_SHIFT;
        } else if (reqhz <= GQSPI_FREQ_100MHZ) {
-               zynqmp_mmio_read(IOU_TAPDLY_BYPASS_OFST, &tapdlybypass);
-               tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE <<
-                               TAP_DLY_BYPASS_LQSPI_RX_SHIFT);
-               lpbkdlyadj = readl(&regs->lpbkdly);
-               lpbkdlyadj |= (GQSPI_LPBK_DLY_ADJ_LPBK_MASK);
-               datadlyadj = readl(&regs->gqspidlyadj);
-               datadlyadj |= ((GQSPI_USE_DATA_DLY << GQSPI_USE_DATA_DLY_SHIFT)
-                               | (GQSPI_DATA_DLY_ADJ_VALUE <<
-                                       GQSPI_DATA_DLY_ADJ_SHIFT));
+               tapdlybypass = TAP_DLY_BYPASS_LQSPI_RX_VALUE <<
+                               TAP_DLY_BYPASS_LQSPI_RX_SHIFT;
+               lpbkdlyadj = GQSPI_LPBK_DLY_ADJ_LPBK_MASK;
+               datadlyadj = (GQSPI_USE_DATA_DLY << GQSPI_USE_DATA_DLY_SHIFT) |
+                             (GQSPI_DATA_DLY_ADJ_VALUE <<
+                              GQSPI_DATA_DLY_ADJ_SHIFT);
        } else if (reqhz <= GQSPI_FREQ_150MHZ) {
-               lpbkdlyadj = readl(&regs->lpbkdly);
-               lpbkdlyadj |= ((GQSPI_LPBK_DLY_ADJ_LPBK_MASK) |
-                               GQSPI_LPBK_DLY_ADJ_DLY_0);
+               lpbkdlyadj = GQSPI_LPBK_DLY_ADJ_LPBK_MASK |
+                             GQSPI_LPBK_DLY_ADJ_DLY_0;
        }

        zynqmp_mmio_write(IOU_TAPDLY_BYPASS_OFST, IOU_TAPDLY_BYPASS_MASK,
--
2.17.1

This email and any attachments are intended for the sole use of the named 
recipient(s) and contain(s) confidential information that may be proprietary, 
privileged or copyrighted under applicable law. If you are not the intended 
recipient, do not read, copy, or forward this email message or any attachments. 
Delete this email message and any attachments immediately.