Add dwc_eth_qos glue driver for the Intel Elkhart-Lake SOC.
Signed-off-by: Philip Oberfichtner <p...@denx.de>
---
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/dwc_eth_qos.h | 1 +
drivers/net/dwc_eth_qos_intel.c | 446 ++++++++++++++++++++++++++++++++
drivers/net/dwc_eth_qos_intel.h | 58 +++++
include/pci_ids.h | 9 +
6 files changed, 522 insertions(+)
create mode 100644 drivers/net/dwc_eth_qos_intel.c
create mode 100644 drivers/net/dwc_eth_qos_intel.h
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b2d7b49976..b23fe55792 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -225,6 +225,13 @@ config DWC_ETH_QOS_IMX
The Synopsys Designware Ethernet QOS IP block with the specific
configuration used in IMX soc.
+config DWC_ETH_QOS_INTEL
+ bool "Synopsys DWC Ethernet QOS device support for Intel"
+ depends on DWC_ETH_QOS
+ help
+ The Synopsys Designware Ethernet QOS IP block with the specific
+ configuration used in the Intel Elkhart-Lake soc.
+
config DWC_ETH_QOS_ROCKCHIP
bool "Synopsys DWC Ethernet QOS device support for Rockchip SoCs"
depends on DWC_ETH_QOS
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index dc3404519d..bd62c65dd5 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o
obj-$(CONFIG_DWC_ETH_QOS) += dwc_eth_qos.o
obj-$(CONFIG_DWC_ETH_QOS_IMX) += dwc_eth_qos_imx.o
+obj-$(CONFIG_DWC_ETH_QOS_INTEL) += dwc_eth_qos_intel.o
obj-$(CONFIG_DWC_ETH_QOS_ROCKCHIP) += dwc_eth_qos_rockchip.o
obj-$(CONFIG_DWC_ETH_QOS_QCOM) += dwc_eth_qos_qcom.o
obj-$(CONFIG_DWC_ETH_QOS_STARFIVE) += dwc_eth_qos_starfive.o
diff --git a/drivers/net/dwc_eth_qos.h b/drivers/net/dwc_eth_qos.h
index 7984582c49..f8ce7a41a2 100644
--- a/drivers/net/dwc_eth_qos.h
+++ b/drivers/net/dwc_eth_qos.h
@@ -295,6 +295,7 @@ void *eqos_get_driver_data(struct udevice *dev);
fdt_addr_t eqos_get_base_addr_dt(struct udevice *dev);
extern struct eqos_config eqos_imx_config;
+extern struct eqos_config eqos_intel_config;
extern struct eqos_config eqos_rockchip_config;
extern struct eqos_config eqos_qcom_config;
extern struct eqos_config eqos_stm32mp13_config;
diff --git a/drivers/net/dwc_eth_qos_intel.c b/drivers/net/dwc_eth_qos_intel.c
new file mode 100644
index 0000000000..39952ef52a
--- /dev/null
+++ b/drivers/net/dwc_eth_qos_intel.c
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2023 DENX Software Engineering GmbH
+ * Philip Oberfichtner <p...@denx.de>
+ *
+ * Based on linux v6.1.38, especially drivers/net/ethernet/stmicro/stmmac
+ */
+
+#include <asm/io.h>
+#include <dm.h>
+#include <linux/delay.h>
+#include <miiphy.h>
+#include <net.h>
+#include <pci.h>
+
+#include "dwc_eth_qos.h"
+#include "dwc_eth_qos_intel.h"
+
+static struct pci_device_id intel_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_RGMII1G) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_SGMII1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_SGMII2G5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G)
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G)
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G)
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G)
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5) },
+ {}
+};
+
+static int __pci_config(struct udevice *dev)
+{
+ u32 val;
+
+ /* Try to enable I/O accesses and bus-mastering */
+ dm_pci_read_config32(dev, PCI_COMMAND, &val);
+ val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ dm_pci_write_config32(dev, PCI_COMMAND, val);
+
+ /* Make sure it worked */
+ dm_pci_read_config32(dev, PCI_COMMAND, &val);
+ if (!(val & PCI_COMMAND_MEMORY)) {
+ pr_err("%s: Can't enable I/O memory\n", __func__);
+ return -ENOSPC;
+ }
+ if (!(val & PCI_COMMAND_MASTER)) {
+ pr_err("%s: Can't enable bus-mastering\n", __func__);
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static void __limit_fifo_size(struct udevice *dev)
+{
+ /*
+ * As described in Intel Erratum EHL22, Document Number: 636674-2.1,
+ * the PSE GbE Controllers advertise a wrong RX and TX fifo size.
+ * Software should limit this value to 64KB.
+ */
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ eqos->tx_fifo_sz = 0x8000;
+ eqos->rx_fifo_sz = 0x8000;
+}
+
+static int __serdes_status_poll(struct udevice *dev,
+ unsigned char phyaddr, unsigned char phyreg,
+ unsigned short mask, unsigned short val)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ unsigned int retries = 10;
+ unsigned short val_rd;
+
+ do {
+ miiphy_read(eqos->mii->name, phyaddr, phyreg, &val_rd);
+ if ((val_rd & mask) == (val & mask))
+ return 0;
+ udelay(POLL_DELAY_US);
+ } while (--retries);
+
+ return -ETIMEDOUT;
+}
+
+ /* Returns -ve if MAC is unknown and 0 on success */
+static int __mac_check_pse(const struct udevice *dev, bool *is_pse)
+{
+ struct pci_child_plat *plat = dev_get_parent_plat(dev);
+
+ if (!plat || plat->vendor != PCI_VENDOR_ID_INTEL)
+ return -ENXIO;
+
+ switch (plat->device) {
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5:
+ *is_pse = 1;
+ return 0;
+
+ case PCI_DEVICE_ID_INTEL_EHL_RGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_SGMII1:
+ case PCI_DEVICE_ID_INTEL_EHL_SGMII2G5:
+ *is_pse = 0;
+ return 0;
+ };
+
+ return -ENXIO;
+}
+
+static bool __serdes_link_mode_2500(struct udevice *dev)
+{
+ const unsigned char phyad = INTEL_MGBE_ADHOC_ADDR;
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ unsigned short data;
+
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR, &data);
+ if (((data & SERDES_LINK_MODE_MASK) >> SERDES_LINK_MODE_SHIFT) ==
+ SERDES_LINK_MODE_2G5)
+ return true;
+
+ return false;
+}
+
+static int __serdes_powerup(struct udevice *dev)
+{
+ /* Also see linux/drivers/net/t/ethernet/stmicro/stmmac/dwmac-intel.c */
+
+ const unsigned char phyad = INTEL_MGBE_ADHOC_ADDR;
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ unsigned short data;
+ int ret;
+ bool is_pse;
+
+ /* Set the serdes rate and the PCLK rate */
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR0, &data);
+
+ data &= ~SERDES_RATE_MASK;
+ data &= ~SERDES_PCLK_MASK;
+
+ if (__serdes_link_mode_2500(dev))
+ data |= SERDES_RATE_PCIE_GEN2 << SERDES_RATE_PCIE_SHIFT |
+ SERDES_PCLK_37p5MHZ << SERDES_PCLK_SHIFT;
+ else
+ data |= SERDES_RATE_PCIE_GEN1 << SERDES_RATE_PCIE_SHIFT |
+ SERDES_PCLK_70MHZ << SERDES_PCLK_SHIFT;
+
+ miiphy_write(eqos->mii->name, phyad, SERDES_GCR0, data);
+
+ /* assert clk_req */
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR0, &data);
+ data |= SERDES_PLL_CLK;
+ miiphy_write(eqos->mii->name, phyad, SERDES_GCR0, data);
+
+ /* check for clk_ack assertion */
+ ret = __serdes_status_poll(dev, phyad, SERDES_GSR0,
+ SERDES_PLL_CLK, SERDES_PLL_CLK);
+
+ if (ret) {
+ pr_err("Serdes PLL clk request timeout\n");
+ return ret;
+ }
+
+ /* assert lane reset*/
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR0, &data);
+ data |= SERDES_RST;
+ miiphy_write(eqos->mii->name, phyad, SERDES_GCR0, data);
+
+ /* check for assert lane reset reflection */
+ ret = __serdes_status_poll(dev, phyad, SERDES_GSR0,
+ SERDES_RST, SERDES_RST);
+
+ if (ret) {
+ pr_err("Serdes assert lane reset timeout\n");
+ return ret;
+ }
+
+ /* move power state to P0 */
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR0, &data);
+ data &= ~SERDES_PWR_ST_MASK;
+ data |= SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT;
+ miiphy_write(eqos->mii->name, phyad, SERDES_GCR0, data);
+
+ /* Check for P0 state */
+ ret = __serdes_status_poll(dev, phyad, SERDES_GSR0,
+ SERDES_PWR_ST_MASK,
+ SERDES_PWR_ST_P0 << SERDES_PWR_ST_SHIFT);
+
+ if (ret) {
+ pr_err("Serdes power state P0 timeout.\n");
+ return ret;
+ }
+
+ /* PSE only - ungate SGMII PHY Rx Clock*/
+ ret = __mac_check_pse(dev, &is_pse);
+ if (ret) {
+ pr_err("Failed to determine MAC type.\n");
+ return ret;
+ }
+
+ if (is_pse) {
+ miiphy_read(eqos->mii->name, phyad, SERDES_GCR0, &data);
+ data |= SERDES_PHY_RX_CLK;
+ miiphy_write(eqos->mii->name, phyad, SERDES_GCR0, data);
+ }
+
+ return 0;
+}
+
+static int __xpcs_access(struct udevice *dev, int reg, int v)
+{
+ /*
+ * Common read/write helper function
+ *
+ * It may seem a bit odd at a first glance that we use bus->read()
+ * directly insetad of one of the wrapper functions. But:
+ *
+ * (1) phy_read() can't be used because we do not access an acutal PHY
+ * but a MAC-internal submodule.
+ *
+ * (2) miiphy_read() can't be used because it assumes MDIO_DEVAD_NONE.
+ */
+
+ int port = INTEL_MGBE_XPCS_ADDR;
+ int devad = 0x1f;
+ u16 val;
+ struct eqos_priv *eqos;
+ struct mii_dev *bus;
+
+ eqos = dev_get_priv(dev);
+ bus = eqos->mii;
+
+ if (v < 0)
+ return bus->read(bus, port, devad, reg);
+
+ val = v;
+ return bus->write(bus, port, devad, reg, val);
+}
+
+static int __xpcs_read(struct udevice *dev, int reg)
+{
+ return __xpcs_access(dev, reg, -1);
+}
+
+static int __xpcs_write(struct udevice *dev, int reg, u16 val)
+{
+ return __xpcs_access(dev, reg, val);
+}
+
+static int __xpcs_clr_bits(struct udevice *dev, int reg, u16 bits)
+{
+ int ret;
+
+ ret = __xpcs_read(dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~bits;
+
+ return __xpcs_write(dev, reg, ret);
+}
+
+static int __xpcs_set_bits(struct udevice *dev, int reg, u16 bits)
+{
+ int ret;
+
+ ret = __xpcs_read(dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret |= bits;
+
+ return __xpcs_write(dev, reg, ret);
+}
+
+static int __xpcs_init(struct udevice *dev)
+{
+ /* Also see linux/drivers/net/pcs/pcs-xpcs.c */
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ phy_interface_t interface = eqos->config->interface(dev);
+
+ if (interface != PHY_INTERFACE_MODE_SGMII)
+ return 0;
+
+ if (__xpcs_clr_bits(dev, VR_MII_MMD_CTRL, XPCS_AN_CL37_EN) ||
+ __xpcs_set_bits(dev, VR_MII_AN_CTRL, XPCS_MODE_SGMII) ||
+ __xpcs_set_bits(dev, VR_MII_DIG_CTRL1, XPCS_MAC_AUTO_SW) ||
+ __xpcs_set_bits(dev, VR_MII_MMD_CTRL, XPCS_AN_CL37_EN))
+ return -EIO;
+
+ return 0;
+}
+
+static int eqos_probe_ressources_intel(struct udevice *dev)
+{
+ __limit_fifo_size(dev);
+
+ return __pci_config(dev);
+}
+
+/*
+ * overwrite __weak function from eqos_intel.c
+ *
+ * For PCI devices the devcie tree is optional. Choose driver data based on PCI
+ * IDs instead.
+ */
+void *eqos_get_driver_data(struct udevice *dev)
+{
+ const struct pci_device_id *id;
+ const struct pci_child_plat *plat;
+
+ plat = dev_get_parent_plat(dev);
+
+ if (!plat)
+ return NULL;
+
+ /* last intel_pci_ids element is zero initialized */
+ for (id = intel_pci_ids; id->vendor != 0; id++) {
+ if (id->vendor == plat->vendor && id->device == plat->device)
+ return &eqos_intel_config;
+ }
+
+ return NULL;
+}
+
+static fdt_addr_t eqos_get_base_addr_intel(struct udevice *dev)
+{
+ void *ptr = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0,
+ PCI_REGION_TYPE, PCI_REGION_MEM);
+
+ if (!ptr)
+ return FDT_ADDR_T_NONE;
+
+ return (fdt_addr_t)ptr;
+}
+
+static int eqos_start_resets_intel(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ int ret;
+
+ ret = __xpcs_init(dev);
+ if (ret) {
+ pr_err("xpcs init failed.\n");
+ return ret;
+ }
+
+ ret = __serdes_powerup(dev);
+ if (ret) {
+ pr_err("Failed to power up serdes.\n");
+ return ret;
+ }
+
+ /* reset MAC; wait for completion in eqos_start() */
+ writel(EQOS_DMA_MODE_SWR, &eqos->dma_regs->mode);
+
+ return 0;
+}
+
+static ulong eqos_get_tick_clk_rate_intel(struct udevice *dev)
+{
+ return 0;
+}
+
+static int eqos_get_enetaddr_intel(struct udevice *dev)
+{
+ /* Assume MAC address is programmed by previous boot stage */
+ struct eth_pdata *plat = dev_get_plat(dev);
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ u8 *lo = (u8 *)&eqos->mac_regs->address0_low;
+ u8 *hi = (u8 *)&eqos->mac_regs->address0_high;
+
+ plat->enetaddr[0] = lo[0];
+ plat->enetaddr[1] = lo[1];
+ plat->enetaddr[2] = lo[2];
+ plat->enetaddr[3] = lo[3];
+ plat->enetaddr[4] = hi[0];
+ plat->enetaddr[5] = hi[1];
+
+ return 0;
+}
+
+static phy_interface_t eqos_get_interface_intel(const struct udevice *dev)
+{
+ struct pci_child_plat *plat = dev_get_parent_plat(dev);
+
+ if (!plat || plat->vendor != PCI_VENDOR_ID_INTEL)
+ return PHY_INTERFACE_MODE_NA;
+
+ switch (plat->device) {
+ /* The GbE Host Controller has no RGMII interface */
+ case PCI_DEVICE_ID_INTEL_EHL_RGMII1G:
+ return PHY_INTERFACE_MODE_NA;
+
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G:
+ return PHY_INTERFACE_MODE_RGMII;
+
+ /* Host SGMII and Host SGMII2G5 share the same device id */
+ case PCI_DEVICE_ID_INTEL_EHL_SGMII1:
+ case PCI_DEVICE_ID_INTEL_EHL_SGMII2G5:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G:
+ case PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5:
+ return PHY_INTERFACE_MODE_SGMII;
+ };
+
+ return PHY_INTERFACE_MODE_NA;
+}
+
+static struct eqos_ops eqos_intel_ops = {
+ .eqos_inval_desc = eqos_inval_desc_generic,
+ .eqos_flush_desc = eqos_flush_desc_generic,
+ .eqos_inval_buffer = eqos_inval_buffer_generic,
+ .eqos_flush_buffer = eqos_flush_buffer_generic,
+ .eqos_probe_resources = eqos_probe_ressources_intel,
+ .eqos_remove_resources = eqos_null_ops,
+ .eqos_get_base_addr = eqos_get_base_addr_intel,
+ .eqos_stop_resets = eqos_null_ops,
+ .eqos_start_resets = eqos_start_resets_intel,
+ .eqos_stop_clks = eqos_null_ops,
+ .eqos_start_clks = eqos_null_ops,
+ .eqos_calibrate_pads = eqos_null_ops,
+ .eqos_disable_calibration = eqos_null_ops,
+ .eqos_set_tx_clk_speed = eqos_null_ops,
+ .eqos_get_enetaddr = eqos_get_enetaddr_intel,
+ .eqos_get_tick_clk_rate = eqos_get_tick_clk_rate_intel,
+};
+
+struct eqos_config __maybe_unused eqos_intel_config = {
+ .reg_access_always_ok = false,
+ .mdio_wait = 10,
+ .swr_wait = 50,
+ .config_mac = EQOS_MAC_RXQ_CTRL0_RXQ0EN_ENABLED_DCB,
+ .config_mac_mdio = EQOS_MAC_MDIO_ADDRESS_CR_250_300,
+ .axi_bus_width = EQOS_AXI_WIDTH_64,
+ .interface = eqos_get_interface_intel,
+ .ops = &eqos_intel_ops
+};
+
+extern U_BOOT_DRIVER(eth_eqos);
+U_BOOT_PCI_DEVICE(eth_eqos, intel_pci_ids);
diff --git a/drivers/net/dwc_eth_qos_intel.h b/drivers/net/dwc_eth_qos_intel.h
new file mode 100644
index 0000000000..a7eede621c
--- /dev/null
+++ b/drivers/net/dwc_eth_qos_intel.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2023 DENX Software Engineering GmbH
+ * Philip Oberfichtner <p...@denx.de>
+ *
+ * This header is based on linux v6.1.38,
+ *
+ * drivers/net/pcs/pcs-xpcs.h
+ * drivers/net/ethernet/stmicro/stmmac/dwmac-intel.h,
+ *
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates
+ * Copyright (c) 2020 Intel Corporation
+ */
+
+#ifndef __DWMAC_INTEL_H__
+#define __DWMAC_INTEL_H__
+
+#define POLL_DELAY_US 8
+
+/* SERDES Register */
+#define SERDES_GCR 0x0 /* Global Conguration */
+#define SERDES_GSR0 0x5 /* Global Status Reg0 */
+#define SERDES_GCR0 0xb /* Global Configuration Reg0 */
+
+/* SERDES defines */
+#define SERDES_PLL_CLK BIT(0) /* PLL clk valid signal */
+#define SERDES_PHY_RX_CLK BIT(1) /* PSE SGMII PHY rx clk */
+#define SERDES_RST BIT(2) /* Serdes Reset */
+#define SERDES_PWR_ST_MASK GENMASK(6, 4) /* Serdes Power state*/
+#define SERDES_RATE_MASK GENMASK(9, 8)
+#define SERDES_PCLK_MASK GENMASK(14, 12) /* PCLK rate to PHY */
+#define SERDES_LINK_MODE_MASK GENMASK(2, 1)
+#define SERDES_LINK_MODE_SHIFT 1
+#define SERDES_PWR_ST_SHIFT 4
+#define SERDES_PWR_ST_P0 0x0
+#define SERDES_PWR_ST_P3 0x3
+#define SERDES_LINK_MODE_2G5 0x3
+#define SERSED_LINK_MODE_1G 0x2
+#define SERDES_PCLK_37p5MHZ 0x0
+#define SERDES_PCLK_70MHZ 0x1
+#define SERDES_RATE_PCIE_GEN1 0x0
+#define SERDES_RATE_PCIE_GEN2 0x1
+#define SERDES_RATE_PCIE_SHIFT 8
+#define SERDES_PCLK_SHIFT 12
+
+#define INTEL_MGBE_ADHOC_ADDR 0x15
+#define INTEL_MGBE_XPCS_ADDR 0x16
+
+/* XPCS defines */
+#define XPCS_MODE_SGMII BIT(2)
+#define XPCS_MAC_AUTO_SW BIT(9)
+#define XPCS_AN_CL37_EN BIT(12)
+
+#define VR_MII_MMD_CTRL 0x0000
+#define VR_MII_DIG_CTRL1 0x8000
+#define VR_MII_AN_CTRL 0x8001
+
+#endif /* __DWMAC_INTEL_H__ */
diff --git a/include/pci_ids.h b/include/pci_ids.h
index f1886c3a75..14acb77d2d 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2601,6 +2601,15 @@
#define PCI_DEVICE_ID_DCI_PCCOM2 0x0004
#define PCI_VENDOR_ID_INTEL 0x8086
+#define PCI_DEVICE_ID_INTEL_EHL_RGMII1G 0x4b30
+#define PCI_DEVICE_ID_INTEL_EHL_SGMII1 0x4b31
+#define PCI_DEVICE_ID_INTEL_EHL_SGMII2G5 0x4b32
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_RGMII1G 0x4ba0
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII1G 0x4ba1
+#define PCI_DEVICE_ID_INTEL_EHL_PSE0_SGMII2G5 0x4ba2
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_RGMII1G 0x4bb0
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII1G 0x4bb1
+#define PCI_DEVICE_ID_INTEL_EHL_PSE1_SGMII2G5 0x4bb2
#define PCI_DEVICE_ID_INTEL_EESSC 0x0008
#define PCI_DEVICE_ID_INTEL_SNB_IMC 0x0100
#define PCI_DEVICE_ID_INTEL_IVB_IMC 0x0154
--
2.39.2
