[PATCH 5/7] spi: zynqmp_gqspi: Fix write issues in single mode

[Ashok Reddy Soma]

Add dummy write to genfifo register in chipselect.

Enable manual start in zynqmp_qspi_fill_gen_fifo().

Also enable GQSPI_IXR_GFNFULL_MASK and check for it instead of
GQSPI_IXR_GFEMTY_MASK.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.s...@xilinx.com>
---

 drivers/spi/zynqmp_gqspi.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c
index 136c20f09e..f50a7304ea 100644
--- a/drivers/spi/zynqmp_gqspi.c
+++ b/drivers/spi/zynqmp_gqspi.c
@@ -239,10 +239,21 @@ static void zynqmp_qspi_fill_gen_fifo(struct 
zynqmp_qspi_priv *priv,
                                      u32 gqspi_fifo_reg)
 {
        struct zynqmp_qspi_regs *regs = priv->regs;
+       u32 config_reg, ier;
        int ret = 0;

+       config_reg = readl(&regs->confr);
+       /* Manual start if needed */
+       config_reg |= GQSPI_STRT_GEN_FIFO;
+       writel(config_reg, &regs->confr);
+
+       /* Enable interrupts */
+       ier = readl(&regs->ier);
+       ier |= GQSPI_IXR_GFNFULL_MASK;
+       writel(ier, &regs->ier);
+
        /* Wait until the fifo is not full to write the new command */
-       ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_GFEMTY_MASK, 1,
+       ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_GFNFULL_MASK, 1,
                                GQSPI_TIMEOUT, 1);
        if (ret)
                printf("%s Timeout\n", __func__);
@@ -265,6 +276,9 @@ static void zynqmp_qspi_chipselect(struct zynqmp_qspi_priv 
*priv, int is_on)

        debug("GFIFO_CMD_CS: 0x%x\n", gqspi_fifo_reg);

+       /* Dummy generic FIFO entry */
+       zynqmp_qspi_fill_gen_fifo(priv, 0);
+
        zynqmp_qspi_fill_gen_fifo(priv, gqspi_fifo_reg);
 }

--
2.17.1

This email and any attachments are intended for the sole use of the named 
recipient(s) and contain(s) confidential information that may be proprietary, 
privileged or copyrighted under applicable law. If you are not the intended 
recipient, do not read, copy, or forward this email message or any attachments. 
Delete this email message and any attachments immediately.