Re: [PATCH v1 19/25] ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-u-boot

2024-04-19 Thread Patrice CHOTARD



On 4/17/24 11:11, Patrick DELAUNAY wrote:
> Hi,
> 
> On 4/9/24 17:02, Patrice Chotard wrote:
>> red led and button dedicated to fastboot share the same gpio GPIOA13.
>> Led driver is probed early so the corresponding gpio is taken and
>> configured in output which forbid fastboot and stm32prog button usage.
>>
>> To avoid this, remove the "default-state" property from red led node.
>>
>> This will avoid to trigger the led driver probe() to configure the led
>> default state during startup.
>>
>> Signed-off-by: Patrice Chotard 
>> ---
>>
>>   arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 1 -
>>   1 file changed, 1 deletion(-)
>>
> 
> 
> Reviewed-by: Patrick Delaunay 
> 
> Thanks
> Patrick
> 

Applied on u-boot-stm32/master 


Re: [PATCH v1 19/25] ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-u-boot

2024-04-17 Thread Patrick DELAUNAY

Hi,

On 4/9/24 17:02, Patrice Chotard wrote:

red led and button dedicated to fastboot share the same gpio GPIOA13.
Led driver is probed early so the corresponding gpio is taken and
configured in output which forbid fastboot and stm32prog button usage.

To avoid this, remove the "default-state" property from red led node.

This will avoid to trigger the led driver probe() to configure the led
default state during startup.

Signed-off-by: Patrice Chotard 
---

  arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 1 -
  1 file changed, 1 deletion(-)




Reviewed-by: Patrick Delaunay 

Thanks
Patrick



[PATCH v1 19/25] ARM: dts: stm32: Don't probe red led at boot for stm32mp157c-ed1-u-boot

2024-04-09 Thread Patrice Chotard
red led and button dedicated to fastboot share the same gpio GPIOA13.
Led driver is probed early so the corresponding gpio is taken and
configured in output which forbid fastboot and stm32prog button usage.

To avoid this, remove the "default-state" property from red led node.

This will avoid to trigger the led driver probe() to configure the led
default state during startup.

Signed-off-by: Patrice Chotard 
---

 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi 
b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index e6a452c9d8e..edcbfee0fc7 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -62,7 +62,6 @@
red {
label = "error";
gpios = < 13 GPIO_ACTIVE_LOW>;
-   default-state = "off";
status = "okay";
};
};
-- 
2.25.1