Re: [PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
Hi Alper. Am Mi., 22. Juni 2022 um 20:18 Uhr schrieb Alper Nebi Yasak : > > On 09/06/2022 23:49, Heiko Thiery wrote: > > To have only one place to describe the binman images us the > > imx8mn-u-boot.dtsi. To have support for different DDR firmwares this > > nodes are included dependent on the used DDR config option. > > > > Signed-off-by: Heiko Thiery > > Reviewed-by: Fabio Estevam > > --- > > v2: sync with current master and fix merge conflict > > > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 125 +- > > arch/arm/dts/imx8mn-evk-u-boot.dtsi | 120 + > > arch/arm/dts/imx8mn-u-boot.dtsi | 156 +++ > > I see most of this is moving existing definitions, but I'm adding > comments in a general sense, partially for future reference. I have implemented your comments to prepare the dtb files for uniform use and will send an updated version. [SNIP] Thanks -- Heiko
Re: [PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
On 10/06/2022 00:38, Heiko Thiery wrote: > Hi Tim, Hi Simon, > > [SNIP] > >> >> Heiko, >> >> You can add multi-dtb support to this so that it's usable by the other >> imx8mn boards with the following: >> >> [...] >> >> I don't mind sending this as a follow-up to your patch here. > > Since this patch moves the parts from the 2 imx8mn-evk boards to one > "common" file it would be better to do more changes on that in a > separate patch. > >> It looks like there are only the following boards in mainline that >> would benefit from using this shared include: >> imx8mn-beacon-kit-u-boot.dtsi >> imx8mn-var-som-symphony-u-boot.dtsi >> imx8mn-venice-u-boot.dtsi There's also 'imx8mn-bsh-smm-s2-u-boot-common.dtsi'. Slightly different because only half of the blobs are there with IMX8M_DDR3L. >> Have you compared the binman portions of imx8m{m,n,p}-u-boot.dtsi? > > No not yet. I looked a bit and they look very much alike. I suspect it's possible to eventually unify everything into a shared 'imx8m-u-boot.dtsi', but I didn't actually try. >> There are a lot of differences due to different property ordering and >> label/node naming conventions. I would like to see these normalized >> but i'm not clear which is the best example to normalize to. >> Specifically I don't know: >> 1. what is the convention for property ordering in dt... is it simply >> alphabetical order? AFAIK property order doesn't matter for binman. Node order is very significant though. For names, I think we should: - Prefer hyphens to underscores - Prefer lowercase to uppercase - Prefer meaningful names to things like 'blob-ext@1' - Avoid first char being a number (because labels can't have that) >> 2. have we settled on a convention for the blob naming, if so what is >> the best example? I had suggested 'ddr-1d-imem-fw' etc. on a series from Peng, see latest version of it [1]. [1] arm: dts: imx8m: update binman ddr firmware node name https://lore.kernel.org/u-boot/20220603071715.15212-4-peng@oss.nxp.com/ > I am not aware that there is a conventional here. But maybe simon can > give some hints here. >
Re: [PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
On 09/06/2022 23:49, Heiko Thiery wrote: > To have only one place to describe the binman images us the > imx8mn-u-boot.dtsi. To have support for different DDR firmwares this > nodes are included dependent on the used DDR config option. > > Signed-off-by: Heiko Thiery > Reviewed-by: Fabio Estevam > --- > v2: sync with current master and fix merge conflict > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 125 +- > arch/arm/dts/imx8mn-evk-u-boot.dtsi | 120 + > arch/arm/dts/imx8mn-u-boot.dtsi | 156 +++ I see most of this is moving existing definitions, but I'm adding comments in a general sense, partially for future reference. > 3 files changed, 159 insertions(+), 242 deletions(-) > create mode 100644 arch/arm/dts/imx8mn-u-boot.dtsi > > diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > index 4d0ecb07d4..3d0e817313 100644 > --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > @@ -3,11 +3,9 @@ > * Copyright 2019, 2021 NXP > */ > > -/ { > - binman: binman { > - multiple-images; > - }; > +#include "imx8mn-u-boot.dtsi" > > +/ { > wdt-reboot { > compatible = "wdt-reboot"; > wdt = <>; > @@ -143,122 +141,3 @@ > [...] > diff --git a/arch/arm/dts/imx8mn-evk-u-boot.dtsi > b/arch/arm/dts/imx8mn-evk-u-boot.dtsi > index d1427941eb..339c3dd681 100644 > --- a/arch/arm/dts/imx8mn-evk-u-boot.dtsi > +++ b/arch/arm/dts/imx8mn-evk-u-boot.dtsi > @@ -3,6 +3,7 @@ > * Copyright 2019 NXP > */ > > +#include "imx8mn-u-boot.dtsi" > #include "imx8mn-ddr4-evk-u-boot.dtsi" "imx8mn-ddr4-evk-u-boot.dtsi" already includes "imx8mn-u-boot.dtsi". I think it should only be included once. I don't know why these are structured this way, but I think common parts of the two boards should've been in a "imx8mn-evk-common-u-boot.dtsi" or something which the board -u-boot.dtsi files would include. > > { > @@ -24,122 +25,3 @@ > [...] > diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi > new file mode 100644 > index 00..7b591085a0 > --- /dev/null > +++ b/arch/arm/dts/imx8mn-u-boot.dtsi > @@ -0,0 +1,156 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright 2019 NXP > + */ > + > +/ { > + binman: binman { > + multiple-images; > + }; > +}; > + > + { > + u_boot_spl_ddr: u-boot-spl-ddr { > + filename = "u-boot-spl-ddr.bin"; > + pad-byte = <0xff>; > + align-size = <4>; > + align = <4>; > + > + u-boot-spl { > + align-end = <4>; > + }; Maybe it's better to add an empty 'ddr-fw' section here, and populate that below. > + }; > + > + spl { > + filename = "spl.bin"; > + > + mkimage { > + args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e > 0x912000"; > + > + blob { > + filename = "u-boot-spl-ddr.bin"; > + }; > + }; > + }; > + > + itb { > + filename = "u-boot.itb"; > + > + fit { > + description = "Configuration to load ATF before U-Boot"; > + #address-cells = <1>; > + fit,external-offset = ; > + > + images { > + uboot { > + description = "U-Boot (64-bit)"; > + type = "standalone"; > + arch = "arm64"; > + compression = "none"; > + load = ; > + > + uboot_blob: blob-ext { > + filename = "u-boot-nodtb.bin"; > + }; > + }; > + > + atf { > + description = "ARM Trusted Firmware"; > + type = "firmware"; > + arch = "arm64"; > + compression = "none"; > + load = <0x96>; > + entry = <0x96>; > + > + atf_blob: blob-ext { > + filename = "bl31.bin"; > + }; > + }; > + > + fdt { > + description = "NAME"; > + type = "flat_dt"; > + compression = "none"; > + > + uboot_fdt_blob: blob-ext { > +
Re: [PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
Hi Tim, Hi Simon, [SNIP] > > Heiko, > > You can add multi-dtb support to this so that it's usable by the other > imx8mn boards with the following: > diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi > index 7b591085a0be..af6697b1efbc 100644 > --- a/arch/arm/dts/imx8mn-u-boot.dtsi > +++ b/arch/arm/dts/imx8mn-u-boot.dtsi > @@ -38,6 +38,7 @@ > > fit { > description = "Configuration to load ATF before > U-Boot"; > + fit,fdt-list = "of-list"; > #address-cells = <1>; > fit,external-offset = ; > > @@ -67,7 +68,7 @@ > }; > }; > > - fdt { > + @fdt-SEQ { > description = "NAME"; > type = "flat_dt"; > compression = "none"; > @@ -79,13 +80,13 @@ > }; > > configurations { > - default = "conf"; > + default = "@config-DEFAULT-SEQ"; > > - conf { > + binman_configuration: @config-SEQ { > description = "NAME"; > firmware = "uboot"; > loadables = "atf"; > - fdt = "fdt"; > + fdt = "fdt-SEQ"; > }; > }; > }; > > I don't mind sending this as a follow-up to your patch here. Since this patch moves the parts from the 2 imx8mn-evk boards to one "common" file it would be better to do more changes on that in a separate patch. > It looks like there are only the following boards in mainline that > would benefit from using this shared include: > imx8mn-beacon-kit-u-boot.dtsi > imx8mn-var-som-symphony-u-boot.dtsi > imx8mn-venice-u-boot.dtsi > > Have you compared the binman portions of imx8m{m,n,p}-u-boot.dtsi? No not yet. > There are a lot of differences due to different property ordering and > label/node naming conventions. I would like to see these normalized > but i'm not clear which is the best example to normalize to. > Specifically I don't know: > 1. what is the convention for property ordering in dt... is it simply > alphabetical order? > 2. have we settled on a convention for the blob naming, if so what is > the best example? I am not aware that there is a conventional here. But maybe simon can give some hints here. -- Heiko -- Heiko
Re: [PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
On Thu, Jun 9, 2022 at 1:50 PM Heiko Thiery wrote: > > To have only one place to describe the binman images us the > imx8mn-u-boot.dtsi. To have support for different DDR firmwares this > nodes are included dependent on the used DDR config option. > > Signed-off-by: Heiko Thiery > Reviewed-by: Fabio Estevam > --- > v2: sync with current master and fix merge conflict > > arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 125 +- > arch/arm/dts/imx8mn-evk-u-boot.dtsi | 120 + > arch/arm/dts/imx8mn-u-boot.dtsi | 156 +++ > 3 files changed, 159 insertions(+), 242 deletions(-) > create mode 100644 arch/arm/dts/imx8mn-u-boot.dtsi > > diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > index 4d0ecb07d4..3d0e817313 100644 > --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi > @@ -3,11 +3,9 @@ > * Copyright 2019, 2021 NXP > */ > > -/ { > - binman: binman { > - multiple-images; > - }; > +#include "imx8mn-u-boot.dtsi" > > +/ { > wdt-reboot { > compatible = "wdt-reboot"; > wdt = <>; > @@ -143,122 +141,3 @@ > { > u-boot,dm-spl; > }; > - > - { > -u-boot-spl-ddr { > - filename = "u-boot-spl-ddr.bin"; > - pad-byte = <0xff>; > - align-size = <4>; > - align = <4>; > - > - u-boot-spl { > - align-end = <4>; > - }; > - > - blob_1: blob-ext@1 { > - filename = "ddr4_imem_1d_201810.bin"; > - size = <0x8000>; > - }; > - > - blob_2: blob-ext@2 { > - filename = "ddr4_dmem_1d_201810.bin"; > - size = <0x4000>; > - }; > - > - blob_3: blob-ext@3 { > - filename = "ddr4_imem_2d_201810.bin"; > - size = <0x8000>; > - }; > - > - blob_4: blob-ext@4 { > - filename = "ddr4_dmem_2d_201810.bin"; > - size = <0x4000>; > - }; > - }; > - > - > - spl { > - filename = "spl.bin"; > - > - mkimage { > - args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e > 0x912000"; > - > - blob { > - filename = "u-boot-spl-ddr.bin"; > - }; > - }; > - }; > - > - itb { > - filename = "u-boot.itb"; > - > - fit { > - description = "Configuration to load ATF before > U-Boot"; > - #address-cells = <1>; > - fit,external-offset = ; > - > - images { > - uboot { > - description = "U-Boot (64-bit)"; > - type = "standalone"; > - arch = "arm64"; > - compression = "none"; > - load = ; > - > - uboot_blob: blob-ext { > - filename = "u-boot-nodtb.bin"; > - }; > - }; > - > - atf { > - description = "ARM Trusted Firmware"; > - type = "firmware"; > - arch = "arm64"; > - compression = "none"; > - load = <0x96>; > - entry = <0x96>; > - > - atf_blob: blob-ext { > - filename = "bl31.bin"; > - }; > - }; > - > - fdt { > - description = "NAME"; > - type = "flat_dt"; > - compression = "none"; > - > - uboot_fdt_blob: blob-ext { > - filename = "u-boot.dtb"; > - }; > - }; > - }; > - > - configurations { > - default = "conf"; > - > - conf { > - description = "NAME"; > - firmware = "uboot"; > - loadables = "atf"; > -
[PATCH v2 2/2] ARM: imx: imx8mn-evk: use one common u-boot.dtsi for the evk boards
To have only one place to describe the binman images us the imx8mn-u-boot.dtsi. To have support for different DDR firmwares this nodes are included dependent on the used DDR config option. Signed-off-by: Heiko Thiery Reviewed-by: Fabio Estevam --- v2: sync with current master and fix merge conflict arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 125 +- arch/arm/dts/imx8mn-evk-u-boot.dtsi | 120 + arch/arm/dts/imx8mn-u-boot.dtsi | 156 +++ 3 files changed, 159 insertions(+), 242 deletions(-) create mode 100644 arch/arm/dts/imx8mn-u-boot.dtsi diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi index 4d0ecb07d4..3d0e817313 100644 --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi @@ -3,11 +3,9 @@ * Copyright 2019, 2021 NXP */ -/ { - binman: binman { - multiple-images; - }; +#include "imx8mn-u-boot.dtsi" +/ { wdt-reboot { compatible = "wdt-reboot"; wdt = <>; @@ -143,122 +141,3 @@ { u-boot,dm-spl; }; - - { -u-boot-spl-ddr { - filename = "u-boot-spl-ddr.bin"; - pad-byte = <0xff>; - align-size = <4>; - align = <4>; - - u-boot-spl { - align-end = <4>; - }; - - blob_1: blob-ext@1 { - filename = "ddr4_imem_1d_201810.bin"; - size = <0x8000>; - }; - - blob_2: blob-ext@2 { - filename = "ddr4_dmem_1d_201810.bin"; - size = <0x4000>; - }; - - blob_3: blob-ext@3 { - filename = "ddr4_imem_2d_201810.bin"; - size = <0x8000>; - }; - - blob_4: blob-ext@4 { - filename = "ddr4_dmem_2d_201810.bin"; - size = <0x4000>; - }; - }; - - - spl { - filename = "spl.bin"; - - mkimage { - args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000"; - - blob { - filename = "u-boot-spl-ddr.bin"; - }; - }; - }; - - itb { - filename = "u-boot.itb"; - - fit { - description = "Configuration to load ATF before U-Boot"; - #address-cells = <1>; - fit,external-offset = ; - - images { - uboot { - description = "U-Boot (64-bit)"; - type = "standalone"; - arch = "arm64"; - compression = "none"; - load = ; - - uboot_blob: blob-ext { - filename = "u-boot-nodtb.bin"; - }; - }; - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - load = <0x96>; - entry = <0x96>; - - atf_blob: blob-ext { - filename = "bl31.bin"; - }; - }; - - fdt { - description = "NAME"; - type = "flat_dt"; - compression = "none"; - - uboot_fdt_blob: blob-ext { - filename = "u-boot.dtb"; - }; - }; - }; - - configurations { - default = "conf"; - - conf { - description = "NAME"; - firmware = "uboot"; - loadables = "atf"; - fdt = "fdt"; - }; - }; - }; - }; - - imx-boot { - filename = "flash.bin"; - pad-byte = <0x00>; - - spl: blob-ext@1 { - offset = <0x0>; -