[U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
The tricorder stops booting with the following message: U-Boot 2011.12-00325-ga661206 (Feb 13 2012 - 09:29:50) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Tricorder + LPDDR/NAND I2C: ready DRAM: 128 MiB NAND: CONFIG_MTD_ECC_SOFT not enabled 0 MiB MMC: OMAP SD/MMC: 0 Adding CONFIG_MTD_ECC_SOFT to config file fixes this problem. Signed-off-by: Thomas Weber we...@corscience.de --- include/configs/tricorder.h |1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index f87696b..0e8003f 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -110,6 +110,7 @@ /* Board NAND Info */ #define CONFIG_SYS_NO_FLASH/* no NOR flash */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_ECC_SOFT #define MTDIDS_DEFAULT nand0=nand #define MTDPARTS_DEFAULT mtdparts=nand: \ 512k(u-boot-spl), \ -- 1.7.8.4 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
On 02/13/2012 02:56 AM, Thomas Weber wrote: The tricorder stops booting with the following message: U-Boot 2011.12-00325-ga661206 (Feb 13 2012 - 09:29:50) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Tricorder + LPDDR/NAND I2C: ready DRAM: 128 MiB NAND: CONFIG_MTD_ECC_SOFT not enabled 0 MiB MMC: OMAP SD/MMC: 0 Adding CONFIG_MTD_ECC_SOFT to config file fixes this problem. Signed-off-by: Thomas Weber we...@corscience.de --- include/configs/tricorder.h |1 + 1 files changed, 1 insertions(+), 0 deletions(-) Sorry about that -- I meant to exclude nand: make 1-bit software ECC configurable from the patchset I applied, due to the potential for this sort of breakage. We should revert that patch until the issues raised here are resolved: http://patchwork.ozlabs.org/patch/119149/ -Scott ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
On Mon, Feb 13, 2012 at 2:44 PM, Scott Wood scottw...@freescale.com wrote: On 02/13/2012 02:56 AM, Thomas Weber wrote: The tricorder stops booting with the following message: U-Boot 2011.12-00325-ga661206 (Feb 13 2012 - 09:29:50) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Tricorder + LPDDR/NAND I2C: ready DRAM: 128 MiB NAND: CONFIG_MTD_ECC_SOFT not enabled 0 MiB MMC: OMAP SD/MMC: 0 Adding CONFIG_MTD_ECC_SOFT to config file fixes this problem. Signed-off-by: Thomas Weber we...@corscience.de --- include/configs/tricorder.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Sorry about that -- I meant to exclude nand: make 1-bit software ECC configurable from the patchset I applied, due to the potential for this sort of breakage. We should revert that patch until the issues raised here are resolved: http://patchwork.ozlabs.org/patch/119149/ I had / have plan to take the tricorder patch tomorrow, unless you really want to push a revert from your tree instead. Either way is fine with me. -- Tom ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] Tricorder: Fix boot after making software ecc configurable
On 02/13/2012 04:14 PM, Tom Rini wrote: On Mon, Feb 13, 2012 at 2:44 PM, Scott Wood scottw...@freescale.com wrote: On 02/13/2012 02:56 AM, Thomas Weber wrote: The tricorder stops booting with the following message: U-Boot 2011.12-00325-ga661206 (Feb 13 2012 - 09:29:50) OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Tricorder + LPDDR/NAND I2C: ready DRAM: 128 MiB NAND: CONFIG_MTD_ECC_SOFT not enabled 0 MiB MMC: OMAP SD/MMC: 0 Adding CONFIG_MTD_ECC_SOFT to config file fixes this problem. Signed-off-by: Thomas Weber we...@corscience.de --- include/configs/tricorder.h |1 + 1 files changed, 1 insertions(+), 0 deletions(-) Sorry about that -- I meant to exclude nand: make 1-bit software ECC configurable from the patchset I applied, due to the potential for this sort of breakage. We should revert that patch until the issues raised here are resolved: http://patchwork.ozlabs.org/patch/119149/ I had / have plan to take the tricorder patch tomorrow, unless you really want to push a revert from your tree instead. Either way is fine with me. This affects more than just tricorder -- any board that depends on soft ECC will be broken, since none of them define this symbol. I thought I had left this patch out, but apparently didn't. -Scott ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
