Re: [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'
Dear Fabio Estevam, On Sat, Sep 14, 2013 at 7:21 PM, Fabio Estevam feste...@gmail.com wrote: From: Fabio Estevam fabio.este...@freescale.com Building the mx28evk target on a host PC without the 'libssl-dev' package, results in the following build error: mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory Add an entry about the need of installing this package. Also, remove the 'elftosb' text, since now we have the new 'mxsimage' method. Ops, looks like we cannot remove elftosb yet. When I try make u-boot.sb: make[1]: Entering directory `/home/fabio/denx/u-boot/arch/arm/cpu/arm926ejs/mxs' sed s@OBJTREE@/home/fabio/denx/u-boot@g /home/fabio/denx/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd /home/fabio/denx/u-boot/u-boot.bd elftosb -zf imx28 -c /home/fabio/denx/u-boot/u-boot.bd -o /home/fabio/denx/u-boot/u-boot.sb make[1]: elftosb: Command not found mxsimage is not enabled by default yet, I would like to postpone that for next release. But (!) it would be nice if you did start testing it so when enabled, it is working well. Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'
Hi Marek, On Sun, Sep 15, 2013 at 11:03 AM, Marek Vasut ma...@denx.de wrote: mxsimage is not enabled by default yet, I would like to postpone that for next release. But (!) it would be nice if you did start testing it so when enabled, it is working well. Ok, so the issue was that I was using the mkimage provided by Ubuntu instead of the one provided by U-boot. There is also a typo in the directory path (arch/arm/boot/ does not exist): With the changes below I can build u-boot.sb via mkimage method: --- a/doc/README.mxsimage +++ b/doc/README.mxsimage @@ -9,12 +9,12 @@ Usage -- producing image: The mxsimage tool is targeted to be a simple replacement for the elftosb2 . To generate an image, write an image configuration file and run: - mkimage -A arm -O u-boot -T mxsimage -n path to configuration file \ + ./tools/mkimage -A arm -O u-boot -T mxsimage -n path to configuration file \ output bootstream file The output bootstream file is usually using the .sb file extension. Note that the example configuration files for producing bootable BootStream with -the U-Boot bootloader can be found under arch/arm/boot/cpu/arm926ejs/mxs/ +the U-Boot bootloader can be found under arch/arm/cpu/arm926ejs/mxs/ directory. See the following files: mxsimage.mx23.cfg -- This is an example configuration for i.MX23 @@ -158,7 +158,7 @@ Usage -- verifying image: The mxsimage can also verify and dump contents of an image. Use the following syntax to verify and dump contents of an image: - mkimage -l input bootstream file + ./tools/mkimage -l input bootstream file This will output all the information from the SB image header and all the instructions contained in the SB image. It will also check if the various If you agree with this change, I can send a patch. Regards, Fabio Estevam ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'
Dear Fabio Estevam, Hi Marek, On Sun, Sep 15, 2013 at 11:03 AM, Marek Vasut ma...@denx.de wrote: mxsimage is not enabled by default yet, I would like to postpone that for next release. But (!) it would be nice if you did start testing it so when enabled, it is working well. Ok, so the issue was that I was using the mkimage provided by Ubuntu instead of the one provided by U-boot. There is also a typo in the directory path (arch/arm/boot/ does not exist): With the changes below I can build u-boot.sb via mkimage method: --- a/doc/README.mxsimage +++ b/doc/README.mxsimage @@ -9,12 +9,12 @@ Usage -- producing image: The mxsimage tool is targeted to be a simple replacement for the elftosb2 . To generate an image, write an image configuration file and run: - mkimage -A arm -O u-boot -T mxsimage -n path to configuration file \ + ./tools/mkimage -A arm -O u-boot -T mxsimage -n path to configuration file \ output bootstream file The output bootstream file is usually using the .sb file extension. Note that the example configuration files for producing bootable BootStream with -the U-Boot bootloader can be found under arch/arm/boot/cpu/arm926ejs/mxs/ +the U-Boot bootloader can be found under arch/arm/cpu/arm926ejs/mxs/ directory. See the following files: mxsimage.mx23.cfg -- This is an example configuration for i.MX23 @@ -158,7 +158,7 @@ Usage -- verifying image: The mxsimage can also verify and dump contents of an image. Use the following syntax to verify and dump contents of an image: - mkimage -l input bootstream file + ./tools/mkimage -l input bootstream file This will output all the information from the SB image header and all the instructions contained in the SB image. It will also check if the various If you agree with this change, I can send a patch. Regards, Fabio Estevam WFM, thanks. You could mention that the mkimage in uboot should be used. Note though, that when building out of tree, the location might differ. Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'
From: Fabio Estevam fabio.este...@freescale.com
Building the mx28evk target on a host PC without the 'libssl-dev' package,
results in the following build error:
mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
Add an entry about the need of installing this package.
Also, remove the 'elftosb' text, since now we have the new 'mxsimage' method.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
doc/README.mxs | 37 +++--
1 file changed, 3 insertions(+), 34 deletions(-)
diff --git a/doc/README.mxs b/doc/README.mxs
index 5d9e72f..265cebd 100644
--- a/doc/README.mxs
+++ b/doc/README.mxs
@@ -27,41 +27,10 @@ Contents
1) Prerequisites
-To make a MXS based board bootable, some tools are necessary. The first one is
-the elftosb tool distributed by Freescale Semiconductor. The other one is the
-mxsboot tool found in U-Boot source tree.
+To make a MXS based board bootable, it is necessary to install the following
+package on the host PC. On a Debian-based distribution it would be:
-Firstly, obtain the elftosb archive from the following location:
-
- ftp://ftp.denx.de/pub/tools/elftosb-10.12.01.tar.gz
-
-We use a $VER variable here to denote the current version. At the time of
-writing of this document, that is 10.12.01. To obtain the file from command
-line, use:
-
- $ VER=10.12.01
- $ wget ftp://ftp.denx.de/pub/tools/elftosb-${VER}.tar.gz
-
-Extract the file:
-
- $ tar xzf elftosb-${VER}.tar.gz
-
-Compile the file. We need to manually tell the linker to use also libm:
-
- $ cd elftosb-${VER}/
- $ make LIBS=-lstdc++ -lm elftosb
-
-Optionally, remove debugging symbols from elftosb:
-
- $ strip bld/linux/elftosb
-
-Finally, install the elftosb binary. The install target is missing, so just
-copy the binary by hand:
-
- $ sudo cp bld/linux/elftosb /usr/local/bin/
-
-Make sure the elftosb binary can be found in your $PATH, in this case this
-means /usr/local/bin/ has to be in your $PATH.
+sudo apt-get install libssl-dev
2) Compiling U-Boot for a MXS based board
---
--
1.8.1.2
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH] doc: README.mxs: Add instruction to install 'libssl-dev'
On Sat, Sep 14, 2013 at 7:21 PM, Fabio Estevam feste...@gmail.com wrote: From: Fabio Estevam fabio.este...@freescale.com Building the mx28evk target on a host PC without the 'libssl-dev' package, results in the following build error: mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory Add an entry about the need of installing this package. Also, remove the 'elftosb' text, since now we have the new 'mxsimage' method. Ops, looks like we cannot remove elftosb yet. When I try make u-boot.sb: make[1]: Entering directory `/home/fabio/denx/u-boot/arch/arm/cpu/arm926ejs/mxs' sed s@OBJTREE@/home/fabio/denx/u-boot@g /home/fabio/denx/u-boot/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd /home/fabio/denx/u-boot/u-boot.bd elftosb -zf imx28 -c /home/fabio/denx/u-boot/u-boot.bd -o /home/fabio/denx/u-boot/u-boot.sb make[1]: elftosb: Command not found ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
