Re: [U-Boot] [PATCH] mx6sabresd: State that only mx6q is supported in SPL

[Stefano Babic]

On 15/11/2014 17:57, Fabio Estevam wrote:
 From: Fabio Estevam fabio.este...@freescale.com
 
 Make clear that current SPL code only supports the mx6q variant.
 
 Signed-off-by: Fabio Estevam fabio.este...@freescale.com
 ---


Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=
DENX Software Engineering GmbH, MD: Wolfgang Denk  Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH] mx6sabresd: State that only mx6q is supported in SPL

[Fabio Estevam]

From: Fabio Estevam fabio.este...@freescale.com

Make clear that current SPL code only supports the mx6q variant.

Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
 board/freescale/mx6sabresd/mx6sabresd.c | 6 ++
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c 
b/board/freescale/mx6sabresd/mx6sabresd.c
index 343c3b6..d5cd37d 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -754,10 +754,8 @@ static void gpr_init(void)
 }
 
 /*
- * This section require the differentiation
- * between iMX6 Sabre Families.
- * But for now, it will configure only for
- * SabreSD.
+ * This section requires the differentiation between iMX6 Sabre boards, but
+ * for now, it will configure only for the mx6q variant.
  */
 static void spl_dram_init(void)
 {
-- 
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot