Re: [U-Boot] [PATCH 6/7] arm: mvebu: helios4: Enable SPI flash support
On Wed, Nov 28, 2018 at 9:10 PM Baruch Siach wrote:
>
> Hi Dennis,
>
> On Wed, Nov 28, 2018 at 07:53:44AM -0600, Dennis Gilmore wrote:
> > On Wed, 2018-11-28 at 17:00 +0800, Aditya Prayoga wrote:
> > > Enable SPI flash support under U-Boot and SPL. The ENV size and
> > > offset,
> > > ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
> > >
> > > To create U-Boot image for SPI flash, user would need to replace
> > > * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with
> > > CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> > > * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
> > >
> > > Signed-off-by: Aditya Prayoga
> > > ---
> > > arch/arm/dts/armada-388-helios4.dts | 7 +++
> > > configs/helios4_defconfig | 1 -
> > > include/configs/helios4.h | 31
> > > +++
> > > 3 files changed, 38 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/dts/armada-388-helios4.dts
> > > b/arch/arm/dts/armada-388-helios4.dts
> > > index 711fc22..cd3fcae 100644
> > > --- a/arch/arm/dts/armada-388-helios4.dts
> > > +++ b/arch/arm/dts/armada-388-helios4.dts
> > > @@ -26,6 +26,7 @@
> > > ethernet1 =
> > > i2c0 =
> > > i2c1 =
> > > + spi1 =
> > has this gone upstream to the kernel?
> > > };
> > >
> > > chosen {
> > > @@ -244,6 +245,7 @@
> > > _spi1_cs_pins>;
> > > pinctrl-names = "default";
> > > status = "okay";
> > > + u-boot,dm-spl;
> > there is a method in u-boot that needs to be used where u-boot specific
> > snippets go into a -u-boot.dts file, I am struggling to
> > find the documentation on it, perhaps someone else can point us both at
> > it.
>
> See tools/binman/README under "Automatic .dtsi inclusion".
Thanks for the pointer
Aditya
> Would have been nice to be able to add u-boot.dtsi onto another .dtsi. That
> would have saved us from copying the content of
> armada-388-clearfog-u-boot.dtsi over and over for each board that carries the
> same SOM. Maybe we can use a symlink for that? It's a little less ugly than
> copy.
>
> baruch
>
> > > };
> > >
> > > sdhci@d8000 {
> > > @@ -308,3 +310,8 @@
> > > };
> > > };
> > > };
> > > +
> > > + {
> > > + status = "okay";
> > > + u-boot,dm-spl;
> > > +};
> > same as above the u-boot bit should go in a armada-388-helios4-u-
> > boot.dts file and the generic bits in the upstream kernel dts file.
> >
> > Dennis
>
> --
> http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
> =}ooO--U--Ooo{=
>- bar...@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 6/7] arm: mvebu: helios4: Enable SPI flash support
On Wed, Nov 28, 2018 at 8:53 PM Dennis Gilmore wrote:
>
> On Wed, 2018-11-28 at 17:00 +0800, Aditya Prayoga wrote:
> > Enable SPI flash support under U-Boot and SPL. The ENV size and
> > offset,
> > ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
> >
> > To create U-Boot image for SPI flash, user would need to replace
> > * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with
> > CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> > * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
> >
> > Signed-off-by: Aditya Prayoga
> > ---
> > arch/arm/dts/armada-388-helios4.dts | 7 +++
> > configs/helios4_defconfig | 1 -
> > include/configs/helios4.h | 31
> > +++
> > 3 files changed, 38 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/armada-388-helios4.dts
> > b/arch/arm/dts/armada-388-helios4.dts
> > index 711fc22..cd3fcae 100644
> > --- a/arch/arm/dts/armada-388-helios4.dts
> > +++ b/arch/arm/dts/armada-388-helios4.dts
> > @@ -26,6 +26,7 @@
> > ethernet1 =
> > i2c0 =
> > i2c1 =
> > + spi1 =
> has this gone upstream to the kernel?
No. Should I also send it to kernel?
> > };
> >
> > chosen {
> > @@ -244,6 +245,7 @@
> >_spi1_cs_pins>;
> > pinctrl-names = "default";
> > status = "okay";
> > + u-boot,dm-spl;
> there is a method in u-boot that needs to be used where u-boot specific
> snippets go into a -u-boot.dts file, I am struggling to
> find the documentation on it, perhaps someone else can point us both at
> it.
>
Yes, i saw that kind of dtsi, for example armada-388-clearfog-u-boot.dtsi
but i could not find the documentation or figuring out how it works.
I was expecting something like #include "armada-388-clearfog-u-boot.dtsi"
I will move it to armada-388-helios4-u-boot.dtsi on next version.
Aditya
> > };
> >
> > sdhci@d8000 {
> > @@ -308,3 +310,8 @@
> > };
> > };
> > };
> > +
> > + {
> > + status = "okay";
> > + u-boot,dm-spl;
> > +};
> same as above the u-boot bit should go in a armada-388-helios4-u-
> boot.dts file and the generic bits in the upstream kernel dts file.
>
> Dennis
>
> > diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
> > index 53995fe..3bb4622 100644
> > --- a/configs/helios4_defconfig
> > +++ b/configs/helios4_defconfig
> > @@ -6,7 +6,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > CONFIG_SYS_MALLOC_F_LEN=0x2000
> > CONFIG_TARGET_HELIOS4=y
> > CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
> > -CONFIG_SPL_MMC_SUPPORT=y
> > CONFIG_SPL_SERIAL_SUPPORT=y
> > CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> > CONFIG_SPL=y
> > diff --git a/include/configs/helios4.h b/include/configs/helios4.h
> > index bd59ecf..6943378 100644
> > --- a/include/configs/helios4.h
> > +++ b/include/configs/helios4.h
> > @@ -6,6 +6,8 @@
> > #ifndef _CONFIG_HELIOS4_H
> > #define _CONFIG_HELIOS4_H
> >
> > +#include
> > +
> > /*
> > * High Level Configuration Options (easy to change)
> > */
> > @@ -23,6 +25,9 @@
> >
> > /* SPI NOR flash default params, used by sf commands */
> > #define CONFIG_SF_DEFAULT_BUS1
> > +#define CONFIG_SF_DEFAULT_CS 0
> > +#define CONFIG_SF_DEFAULT_SPEED 10400
> > +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
> >
> > /*
> > * SDIO/MMC Card Configuration
> > @@ -43,6 +48,21 @@
> > #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID
> > * \
> > CONFIG_SYS_SCSI_MAX_LUN)
> >
> > +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> > +/*
> > + * SPI Flash configuration for the environment access
> > + */
> > +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
> > +#define CONFIG_ENV_SPI_CSCONFIG_SF_DEFAULT_CS
> > +#define CONFIG_ENV_SPI_MAX_HZCONFIG_SF_DEFAULT_SPEED
> > +
> > +/* Environment in SPI NOR flash */
> > +#define CONFIG_ENV_SECT_SIZE SZ_64K
> > +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
> > +#define CONFIG_ENV_OFFSETSZ_1M
> > +#endif
> > +
> > +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
> > /* Environment in MMC */
> > #define CONFIG_SYS_MMC_ENV_DEV 0
> > #define CONFIG_ENV_SECT_SIZE 0x200
> > @@ -50,6 +70,7 @@
> > /* stay within first 1M */
> > #define CONFIG_ENV_OFFSET(SZ_1M - CONFIG_ENV_SIZE)
> > #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
> > +#endif
> >
> > #define CONFIG_PHY_MARVELL /* there is a marvell phy */
> > #define PHY_ANEG_TIMEOUT 8000/* PHY needs a longer aneg
> > time */
> > @@ -69,7 +90,13 @@
> > */
> > #define SPL_BOOT_SPI_NOR_FLASH 1
> > #define SPL_BOOT_SDIO_MMC_CARD 2
> > +
> > +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> > +#define CONFIG_SPL_BOOT_DEVICE
Re: [U-Boot] [PATCH 6/7] arm: mvebu: helios4: Enable SPI flash support
Hi Dennis,
On Wed, Nov 28, 2018 at 07:53:44AM -0600, Dennis Gilmore wrote:
> On Wed, 2018-11-28 at 17:00 +0800, Aditya Prayoga wrote:
> > Enable SPI flash support under U-Boot and SPL. The ENV size and
> > offset,
> > ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
> >
> > To create U-Boot image for SPI flash, user would need to replace
> > * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with
> > CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> > * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
> >
> > Signed-off-by: Aditya Prayoga
> > ---
> > arch/arm/dts/armada-388-helios4.dts | 7 +++
> > configs/helios4_defconfig | 1 -
> > include/configs/helios4.h | 31
> > +++
> > 3 files changed, 38 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/dts/armada-388-helios4.dts
> > b/arch/arm/dts/armada-388-helios4.dts
> > index 711fc22..cd3fcae 100644
> > --- a/arch/arm/dts/armada-388-helios4.dts
> > +++ b/arch/arm/dts/armada-388-helios4.dts
> > @@ -26,6 +26,7 @@
> > ethernet1 =
> > i2c0 =
> > i2c1 =
> > + spi1 =
> has this gone upstream to the kernel?
> > };
> >
> > chosen {
> > @@ -244,6 +245,7 @@
> > _spi1_cs_pins>;
> > pinctrl-names = "default";
> > status = "okay";
> > + u-boot,dm-spl;
> there is a method in u-boot that needs to be used where u-boot specific
> snippets go into a -u-boot.dts file, I am struggling to
> find the documentation on it, perhaps someone else can point us both at
> it.
See tools/binman/README under "Automatic .dtsi inclusion".
Would have been nice to be able to add u-boot.dtsi onto another .dtsi. That
would have saved us from copying the content of
armada-388-clearfog-u-boot.dtsi over and over for each board that carries the
same SOM. Maybe we can use a symlink for that? It's a little less ugly than
copy.
baruch
> > };
> >
> > sdhci@d8000 {
> > @@ -308,3 +310,8 @@
> > };
> > };
> > };
> > +
> > + {
> > + status = "okay";
> > + u-boot,dm-spl;
> > +};
> same as above the u-boot bit should go in a armada-388-helios4-u-
> boot.dts file and the generic bits in the upstream kernel dts file.
>
> Dennis
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}ooO--U--Ooo{=
- bar...@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH 6/7] arm: mvebu: helios4: Enable SPI flash support
On Wed, 2018-11-28 at 17:00 +0800, Aditya Prayoga wrote:
> Enable SPI flash support under U-Boot and SPL. The ENV size and
> offset,
> ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
>
> To create U-Boot image for SPI flash, user would need to replace
> * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with
> CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
>
> Signed-off-by: Aditya Prayoga
> ---
> arch/arm/dts/armada-388-helios4.dts | 7 +++
> configs/helios4_defconfig | 1 -
> include/configs/helios4.h | 31
> +++
> 3 files changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/armada-388-helios4.dts
> b/arch/arm/dts/armada-388-helios4.dts
> index 711fc22..cd3fcae 100644
> --- a/arch/arm/dts/armada-388-helios4.dts
> +++ b/arch/arm/dts/armada-388-helios4.dts
> @@ -26,6 +26,7 @@
> ethernet1 =
> i2c0 =
> i2c1 =
> + spi1 =
has this gone upstream to the kernel?
> };
>
> chosen {
> @@ -244,6 +245,7 @@
>_spi1_cs_pins>;
> pinctrl-names = "default";
> status = "okay";
> + u-boot,dm-spl;
there is a method in u-boot that needs to be used where u-boot specific
snippets go into a -u-boot.dts file, I am struggling to
find the documentation on it, perhaps someone else can point us both at
it.
> };
>
> sdhci@d8000 {
> @@ -308,3 +310,8 @@
> };
> };
> };
> +
> + {
> + status = "okay";
> + u-boot,dm-spl;
> +};
same as above the u-boot bit should go in a armada-388-helios4-u-
boot.dts file and the generic bits in the upstream kernel dts file.
Dennis
> diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
> index 53995fe..3bb4622 100644
> --- a/configs/helios4_defconfig
> +++ b/configs/helios4_defconfig
> @@ -6,7 +6,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
> CONFIG_SYS_MALLOC_F_LEN=0x2000
> CONFIG_TARGET_HELIOS4=y
> CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
> -CONFIG_SPL_MMC_SUPPORT=y
> CONFIG_SPL_SERIAL_SUPPORT=y
> CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> CONFIG_SPL=y
> diff --git a/include/configs/helios4.h b/include/configs/helios4.h
> index bd59ecf..6943378 100644
> --- a/include/configs/helios4.h
> +++ b/include/configs/helios4.h
> @@ -6,6 +6,8 @@
> #ifndef _CONFIG_HELIOS4_H
> #define _CONFIG_HELIOS4_H
>
> +#include
> +
> /*
> * High Level Configuration Options (easy to change)
> */
> @@ -23,6 +25,9 @@
>
> /* SPI NOR flash default params, used by sf commands */
> #define CONFIG_SF_DEFAULT_BUS1
> +#define CONFIG_SF_DEFAULT_CS 0
> +#define CONFIG_SF_DEFAULT_SPEED 10400
> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
>
> /*
> * SDIO/MMC Card Configuration
> @@ -43,6 +48,21 @@
> #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID
> * \
> CONFIG_SYS_SCSI_MAX_LUN)
>
> +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> +/*
> + * SPI Flash configuration for the environment access
> + */
> +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
> +#define CONFIG_ENV_SPI_CSCONFIG_SF_DEFAULT_CS
> +#define CONFIG_ENV_SPI_MAX_HZCONFIG_SF_DEFAULT_SPEED
> +
> +/* Environment in SPI NOR flash */
> +#define CONFIG_ENV_SECT_SIZE SZ_64K
> +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
> +#define CONFIG_ENV_OFFSETSZ_1M
> +#endif
> +
> +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
> /* Environment in MMC */
> #define CONFIG_SYS_MMC_ENV_DEV 0
> #define CONFIG_ENV_SECT_SIZE 0x200
> @@ -50,6 +70,7 @@
> /* stay within first 1M */
> #define CONFIG_ENV_OFFSET(SZ_1M - CONFIG_ENV_SIZE)
> #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
> +#endif
>
> #define CONFIG_PHY_MARVELL /* there is a marvell phy */
> #define PHY_ANEG_TIMEOUT 8000/* PHY needs a longer aneg
> time */
> @@ -69,7 +90,13 @@
> */
> #define SPL_BOOT_SPI_NOR_FLASH 1
> #define SPL_BOOT_SDIO_MMC_CARD 2
> +
> +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
> +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
> +#endif
> +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
> #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD
> +#endif
>
> /* Defines for SPL */
> #define CONFIG_SPL_SIZE (140 << 10)
> @@ -88,12 +115,16 @@
>
> #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
> /* SPL related SPI defines */
> +#define CONFIG_SPL_SPI_FLASH_SUPPORT
> +#define CONFIG_SPL_SPI_LOAD
> +#define CONFIG_SPL_SPI_SUPPORT
> #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x2
> #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_O
> FFS
> #endif
>
> #if
[U-Boot] [PATCH 6/7] arm: mvebu: helios4: Enable SPI flash support
Enable SPI flash support under U-Boot and SPL. The ENV size and offset,
ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16
To create U-Boot image for SPI flash, user would need to replace
* CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
* CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH
Signed-off-by: Aditya Prayoga
---
arch/arm/dts/armada-388-helios4.dts | 7 +++
configs/helios4_defconfig | 1 -
include/configs/helios4.h | 31 +++
3 files changed, 38 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/armada-388-helios4.dts
b/arch/arm/dts/armada-388-helios4.dts
index 711fc22..cd3fcae 100644
--- a/arch/arm/dts/armada-388-helios4.dts
+++ b/arch/arm/dts/armada-388-helios4.dts
@@ -26,6 +26,7 @@
ethernet1 =
i2c0 =
i2c1 =
+ spi1 =
};
chosen {
@@ -244,6 +245,7 @@
_spi1_cs_pins>;
pinctrl-names = "default";
status = "okay";
+ u-boot,dm-spl;
};
sdhci@d8000 {
@@ -308,3 +310,8 @@
};
};
};
+
+ {
+ status = "okay";
+ u-boot,dm-spl;
+};
diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig
index 53995fe..3bb4622 100644
--- a/configs/helios4_defconfig
+++ b/configs/helios4_defconfig
@@ -6,7 +6,6 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_HELIOS4=y
CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y
-CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL=y
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index bd59ecf..6943378 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -6,6 +6,8 @@
#ifndef _CONFIG_HELIOS4_H
#define _CONFIG_HELIOS4_H
+#include
+
/*
* High Level Configuration Options (easy to change)
*/
@@ -23,6 +25,9 @@
/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_BUS 1
+#define CONFIG_SF_DEFAULT_CS 0
+#define CONFIG_SF_DEFAULT_SPEED10400
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
/*
* SDIO/MMC Card Configuration
@@ -43,6 +48,21 @@
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+/*
+ * SPI Flash configuration for the environment access
+ */
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_SECT_SIZE SZ_64K
+#define CONFIG_ENV_SIZECONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_OFFSET SZ_1M
+#endif
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
/* Environment in MMC */
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SECT_SIZE 0x200
@@ -50,6 +70,7 @@
/* stay within first 1M */
#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE)
#define CONFIG_ENV_ADDRCONFIG_ENV_OFFSET
+#endif
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
#define PHY_ANEG_TIMEOUT 8000/* PHY needs a longer aneg time */
@@ -69,7 +90,13 @@
*/
#define SPL_BOOT_SPI_NOR_FLASH 1
#define SPL_BOOT_SDIO_MMC_CARD 2
+
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI
+#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH
+#endif
+#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC
#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD
+#endif
/* Defines for SPL */
#define CONFIG_SPL_SIZE(140 << 10)
@@ -88,12 +115,16 @@
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x2
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
#endif
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
/* SPL related MMC defines */
+#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
#ifdef CONFIG_SPL_BUILD
--
2.7.4
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
