[U-Boot] [PATCH v1 01/13] ehci: Replace board_prepare_usb with board_usb_init

[Ramon Fried]

Use standard board_usb_init() instead of the specific board_prepare_usb.

Signed-off-by: Ramon Fried <ramon.fr...@gmail.com>

---

 board/qualcomm/dragonboard410c/dragonboard410c.c | 4 ++--
 drivers/usb/host/ehci-msm.c                      | 9 ++-------
 2 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/board/qualcomm/dragonboard410c/dragonboard410c.c 
b/board/qualcomm/dragonboard410c/dragonboard410c.c
index 53e231e55a..e8a3ed0450 100644
--- a/board/qualcomm/dragonboard410c/dragonboard410c.c
+++ b/board/qualcomm/dragonboard410c/dragonboard410c.c
@@ -44,7 +44,7 @@ int dram_init_banksize(void)
        return 0;
 }
 
-int board_prepare_usb(enum usb_init_type type)
+int board_usb_init(int index, enum usb_init_type init)
 {
        static struct udevice *pmic_gpio;
        static struct gpio_desc hub_reset, usb_sel;
@@ -93,7 +93,7 @@ int board_prepare_usb(enum usb_init_type type)
                }
        }
 
-       if (type == USB_INIT_HOST) {
+       if (init == USB_INIT_HOST) {
                /* Start USB Hub */
                dm_gpio_set_dir_flags(&hub_reset,
                                      GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 17bfa7c02f..db982624dc 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -38,11 +38,6 @@ struct msm_ehci_priv {
        struct ulpi_viewport ulpi_vp; /* ULPI Viewport */
 };
 
-int __weak board_prepare_usb(enum usb_init_type type)
-{
-       return 0;
-}
-
 static void setup_usb_phy(struct msm_ehci_priv *priv)
 {
        /* Select and enable external configuration with USB PHY */
@@ -102,7 +97,7 @@ static int ehci_usb_probe(struct udevice *dev)
        hcor = (struct ehci_hcor *)((phys_addr_t)hccr +
                        HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
 
-       ret = board_prepare_usb(USB_INIT_HOST);
+       ret = board_usb_init(0, USB_INIT_HOST);
        if (ret < 0)
                return ret;
 
@@ -124,7 +119,7 @@ static int ehci_usb_remove(struct udevice *dev)
 
        reset_usb_phy(p);
 
-       ret = board_prepare_usb(USB_INIT_DEVICE); /* Board specific hook */
+       ret = board_usb_init(0, USB_INIT_DEVICE); /* Board specific hook */
        if (ret < 0)
                return ret;
 
-- 
2.18.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot