Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Fri, Sep 27, 2019 at 7:53 AM Stefano Babic wrote: > > On 27/09/19 14:32, Adam Ford wrote: > > On Fri, Sep 27, 2019 at 7:31 AM Fabio Estevam wrote: > >> > >> On Fri, Sep 27, 2019 at 9:17 AM Adam Ford wrote: > >> > >>> It's been over a month. Is there any reason this cannot be applied? > >> > >> It has been applied in Stefano's tree: > >> https://gitlab.denx.de/u-boot/custodians/u-boot-imx/commit/90fb571d61a8967f5e56c5b03db5e44889325bde > > > > Fantastic! I just looked at master. Hopefully it'll get pulled after > > the next pull request. > > My last PR was rejected (at least, discouraged) due to the number of > changes and release is approaching. But I will not try to pick up random > patches from u-boot-imx master and try to push it just to get it in > release. I am starting to pick up all pacthes that are ready in -next, > starting from u-boot-imx, -master. > That makes sense since this is an improvement and not a bug fix. adam > Regards, > Stefano > > -- > = > DENX Software Engineering GmbH, Managing Director: Wolfgang Denk > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de > = ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On 27/09/19 14:32, Adam Ford wrote: > On Fri, Sep 27, 2019 at 7:31 AM Fabio Estevam wrote: >> >> On Fri, Sep 27, 2019 at 9:17 AM Adam Ford wrote: >> >>> It's been over a month. Is there any reason this cannot be applied? >> >> It has been applied in Stefano's tree: >> https://gitlab.denx.de/u-boot/custodians/u-boot-imx/commit/90fb571d61a8967f5e56c5b03db5e44889325bde > > Fantastic! I just looked at master. Hopefully it'll get pulled after > the next pull request. My last PR was rejected (at least, discouraged) due to the number of changes and release is approaching. But I will not try to pick up random patches from u-boot-imx master and try to push it just to get it in release. I am starting to pick up all pacthes that are ready in -next, starting from u-boot-imx, -master. Regards, Stefano -- = DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de = ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Fri, Sep 27, 2019 at 7:31 AM Fabio Estevam wrote: > > On Fri, Sep 27, 2019 at 9:17 AM Adam Ford wrote: > > > It's been over a month. Is there any reason this cannot be applied? > > It has been applied in Stefano's tree: > https://gitlab.denx.de/u-boot/custodians/u-boot-imx/commit/90fb571d61a8967f5e56c5b03db5e44889325bde Fantastic! I just looked at master. Hopefully it'll get pulled after the next pull request. Thank you, adam ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Fri, Sep 27, 2019 at 9:17 AM Adam Ford wrote: > It's been over a month. Is there any reason this cannot be applied? It has been applied in Stefano's tree: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/commit/90fb571d61a8967f5e56c5b03db5e44889325bde ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Mon, Aug 26, 2019 at 8:00 AM Adam Ford wrote: > > On Thu, Aug 8, 2019 at 1:36 PM Adam Ford wrote: > > > > On Thu, Aug 8, 2019 at 1:14 PM Robert Hancock wrote: > > > > > > Previously the SPL size on all iMX6 platforms was restricted to 68KB > > > because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the > > > other iMX6 variants have 256KB of OCRAM. Add an option > > > CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which > > > don't need to support the SL/DL variants. This allows for an SPL size of > > > 196KB, which makes it much easier to use configurations such as SPL with > > > driver model and FDT control. > > > > > Tested-by: Adam Ford #imx6q_logic > > > > > Signed-off-by: Robert Hancock > > > --- > > Stefano, > > Any chance this can be adopted? I have a bunch of patches pending > this, because my SPL is tight and this patch gives it some breathing > room. > It's been over a month. Is there any reason this cannot be applied? thanks adam > thanks, > > adam > > > > > > > Changed since v2: Remove "default n" in Kconfig since that is the default. > > > > > > arch/arm/mach-imx/mx6/Kconfig | 9 + > > > common/spl/Kconfig| 3 ++- > > > include/configs/imx6_spl.h| 28 ++-- > > > 3 files changed, 37 insertions(+), 3 deletions(-) > > > > > > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > > > index fe5991e..9c27176 100644 > > > --- a/arch/arm/mach-imx/mx6/Kconfig > > > +++ b/arch/arm/mach-imx/mx6/Kconfig > > > @@ -87,6 +87,15 @@ config MX6ULL > > > select SYSCOUNTER_TIMER > > > select SYS_L2CACHE_OFF > > > > > > +config MX6_OCRAM_256KB > > > + bool "Support 256KB OCRAM" > > > + depends on MX6D || MX6Q > > > + help > > > +Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D > > > series > > > +of chips, such as for SPL. The OCRAM of the Lite series of chips > > > is > > > +only 128KB, so using this option will prevent the resulting code > > > from > > > +working on those chips. > > > + > > > config MX6_DDRCAL > > > bool "Include dynamic DDR calibration routines" > > > depends on SPL > > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > > index 54154b9..c5ad047 100644 > > > --- a/common/spl/Kconfig > > > +++ b/common/spl/Kconfig > > > @@ -28,7 +28,8 @@ config SPL_FRAMEWORK > > > config SPL_SIZE_LIMIT > > > int "Maximum size of SPL image" > > > depends on SPL > > > - default 69632 if ARCH_MX6 > > > + default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB > > > + default 200704 if ARCH_MX6 && MX6_OCRAM_256KB > > > default 0 > > > help > > > Specifies the maximum length of the U-Boot SPL image. > > > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > > > index 212dee7..a223930 100644 > > > --- a/include/configs/imx6_spl.h > > > +++ b/include/configs/imx6_spl.h > > > @@ -7,10 +7,32 @@ > > > #define __IMX6_SPL_CONFIG_H > > > > > > #ifdef CONFIG_SPL > > > + > > > +#ifdef CONFIG_MX6_OCRAM_256KB > > > /* > > > - * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: > > > + * see Figure 8.4.1 in IMX6DQ Reference manuals: > > > + * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093 > > > + * - BOOT ROM stack is at 0x0093FFB8 > > > + * - if icache/dcache is enabled (eFuse/strapping controlled) then the > > > + *IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need > > > to > > > + *fit between 0x00907000 and 0x00938000. > > > + * - Additionally the BOOT ROM loads what they consider the firmware > > > image > > > + *which consists of a 4K header in front of us that contains the > > > IVT, DCD > > > + *and some padding thus 'our' max size is really 0x00908000 - > > > 0x00938000 > > > + *or 192KB > > > + */ > > > +#define CONFIG_SPL_MAX_SIZE0x3 > > > +#define CONFIG_SPL_STACK 0x0093FFB8 > > > +/* > > > + * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write > > > the > > > + * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to > > > a > > > + * boot media (given that boot media specific offset is configured > > > properly). > > > + */ > > > +#define CONFIG_SPL_PAD_TO 0x31000 > > > +#else > > > +/* > > > + * see Figure 8-3 in IMX6SDL Reference manuals: > > > * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091 > > > - * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as > > > well > > > * - BOOT ROM stack is at 0x0091FFB8 > > > * - if icache/dcache is enabled (eFuse/strapping controlled) then the > > > *IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need > > > to > > > @@ -29,6 +51,8 @@ > > > */ > > > #define CONFIG_SPL_PAD_TO 0x11000 > > > > > > +#endif > > > + > > > /* MMC support */ > > > #if defined(CONFIG_SPL_MMC_SUPPORT) > > >
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Thu, Aug 8, 2019 at 1:36 PM Adam Ford wrote: > > On Thu, Aug 8, 2019 at 1:14 PM Robert Hancock wrote: > > > > Previously the SPL size on all iMX6 platforms was restricted to 68KB > > because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the > > other iMX6 variants have 256KB of OCRAM. Add an option > > CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which > > don't need to support the SL/DL variants. This allows for an SPL size of > > 196KB, which makes it much easier to use configurations such as SPL with > > driver model and FDT control. > > > Tested-by: Adam Ford #imx6q_logic > > > Signed-off-by: Robert Hancock > > --- Stefano, Any chance this can be adopted? I have a bunch of patches pending this, because my SPL is tight and this patch gives it some breathing room. thanks, adam > > > > Changed since v2: Remove "default n" in Kconfig since that is the default. > > > > arch/arm/mach-imx/mx6/Kconfig | 9 + > > common/spl/Kconfig| 3 ++- > > include/configs/imx6_spl.h| 28 ++-- > > 3 files changed, 37 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > > index fe5991e..9c27176 100644 > > --- a/arch/arm/mach-imx/mx6/Kconfig > > +++ b/arch/arm/mach-imx/mx6/Kconfig > > @@ -87,6 +87,15 @@ config MX6ULL > > select SYSCOUNTER_TIMER > > select SYS_L2CACHE_OFF > > > > +config MX6_OCRAM_256KB > > + bool "Support 256KB OCRAM" > > + depends on MX6D || MX6Q > > + help > > +Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D > > series > > +of chips, such as for SPL. The OCRAM of the Lite series of chips is > > +only 128KB, so using this option will prevent the resulting code > > from > > +working on those chips. > > + > > config MX6_DDRCAL > > bool "Include dynamic DDR calibration routines" > > depends on SPL > > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > > index 54154b9..c5ad047 100644 > > --- a/common/spl/Kconfig > > +++ b/common/spl/Kconfig > > @@ -28,7 +28,8 @@ config SPL_FRAMEWORK > > config SPL_SIZE_LIMIT > > int "Maximum size of SPL image" > > depends on SPL > > - default 69632 if ARCH_MX6 > > + default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB > > + default 200704 if ARCH_MX6 && MX6_OCRAM_256KB > > default 0 > > help > > Specifies the maximum length of the U-Boot SPL image. > > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > > index 212dee7..a223930 100644 > > --- a/include/configs/imx6_spl.h > > +++ b/include/configs/imx6_spl.h > > @@ -7,10 +7,32 @@ > > #define __IMX6_SPL_CONFIG_H > > > > #ifdef CONFIG_SPL > > + > > +#ifdef CONFIG_MX6_OCRAM_256KB > > /* > > - * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: > > + * see Figure 8.4.1 in IMX6DQ Reference manuals: > > + * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093 > > + * - BOOT ROM stack is at 0x0093FFB8 > > + * - if icache/dcache is enabled (eFuse/strapping controlled) then the > > + *IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to > > + *fit between 0x00907000 and 0x00938000. > > + * - Additionally the BOOT ROM loads what they consider the firmware image > > + *which consists of a 4K header in front of us that contains the IVT, > > DCD > > + *and some padding thus 'our' max size is really 0x00908000 - > > 0x00938000 > > + *or 192KB > > + */ > > +#define CONFIG_SPL_MAX_SIZE0x3 > > +#define CONFIG_SPL_STACK 0x0093FFB8 > > +/* > > + * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the > > + * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a > > + * boot media (given that boot media specific offset is configured > > properly). > > + */ > > +#define CONFIG_SPL_PAD_TO 0x31000 > > +#else > > +/* > > + * see Figure 8-3 in IMX6SDL Reference manuals: > > * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091 > > - * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as > > well > > * - BOOT ROM stack is at 0x0091FFB8 > > * - if icache/dcache is enabled (eFuse/strapping controlled) then the > > *IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to > > @@ -29,6 +51,8 @@ > > */ > > #define CONFIG_SPL_PAD_TO 0x11000 > > > > +#endif > > + > > /* MMC support */ > > #if defined(CONFIG_SPL_MMC_SUPPORT) > > #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 > > -- > > 1.8.3.1 > > ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
On Thu, Aug 8, 2019 at 1:14 PM Robert Hancock wrote: > > Previously the SPL size on all iMX6 platforms was restricted to 68KB > because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the > other iMX6 variants have 256KB of OCRAM. Add an option > CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which > don't need to support the SL/DL variants. This allows for an SPL size of > 196KB, which makes it much easier to use configurations such as SPL with > driver model and FDT control. > Tested-by: Adam Ford #imx6q_logic > Signed-off-by: Robert Hancock > --- > > Changed since v2: Remove "default n" in Kconfig since that is the default. > > arch/arm/mach-imx/mx6/Kconfig | 9 + > common/spl/Kconfig| 3 ++- > include/configs/imx6_spl.h| 28 ++-- > 3 files changed, 37 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig > index fe5991e..9c27176 100644 > --- a/arch/arm/mach-imx/mx6/Kconfig > +++ b/arch/arm/mach-imx/mx6/Kconfig > @@ -87,6 +87,15 @@ config MX6ULL > select SYSCOUNTER_TIMER > select SYS_L2CACHE_OFF > > +config MX6_OCRAM_256KB > + bool "Support 256KB OCRAM" > + depends on MX6D || MX6Q > + help > +Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series > +of chips, such as for SPL. The OCRAM of the Lite series of chips is > +only 128KB, so using this option will prevent the resulting code from > +working on those chips. > + > config MX6_DDRCAL > bool "Include dynamic DDR calibration routines" > depends on SPL > diff --git a/common/spl/Kconfig b/common/spl/Kconfig > index 54154b9..c5ad047 100644 > --- a/common/spl/Kconfig > +++ b/common/spl/Kconfig > @@ -28,7 +28,8 @@ config SPL_FRAMEWORK > config SPL_SIZE_LIMIT > int "Maximum size of SPL image" > depends on SPL > - default 69632 if ARCH_MX6 > + default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB > + default 200704 if ARCH_MX6 && MX6_OCRAM_256KB > default 0 > help > Specifies the maximum length of the U-Boot SPL image. > diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h > index 212dee7..a223930 100644 > --- a/include/configs/imx6_spl.h > +++ b/include/configs/imx6_spl.h > @@ -7,10 +7,32 @@ > #define __IMX6_SPL_CONFIG_H > > #ifdef CONFIG_SPL > + > +#ifdef CONFIG_MX6_OCRAM_256KB > /* > - * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: > + * see Figure 8.4.1 in IMX6DQ Reference manuals: > + * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093 > + * - BOOT ROM stack is at 0x0093FFB8 > + * - if icache/dcache is enabled (eFuse/strapping controlled) then the > + *IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to > + *fit between 0x00907000 and 0x00938000. > + * - Additionally the BOOT ROM loads what they consider the firmware image > + *which consists of a 4K header in front of us that contains the IVT, DCD > + *and some padding thus 'our' max size is really 0x00908000 - 0x00938000 > + *or 192KB > + */ > +#define CONFIG_SPL_MAX_SIZE0x3 > +#define CONFIG_SPL_STACK 0x0093FFB8 > +/* > + * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the > + * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a > + * boot media (given that boot media specific offset is configured properly). > + */ > +#define CONFIG_SPL_PAD_TO 0x31000 > +#else > +/* > + * see Figure 8-3 in IMX6SDL Reference manuals: > * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091 > - * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well > * - BOOT ROM stack is at 0x0091FFB8 > * - if icache/dcache is enabled (eFuse/strapping controlled) then the > *IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to > @@ -29,6 +51,8 @@ > */ > #define CONFIG_SPL_PAD_TO 0x11000 > > +#endif > + > /* MMC support */ > #if defined(CONFIG_SPL_MMC_SUPPORT) > #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 > -- > 1.8.3.1 > ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH v2] ARM: imx: Support larger SPL size on IMX6DQ
Previously the SPL size on all iMX6 platforms was restricted to 68KB because the OCRAM size on iMX6SL/DL parts is only 128KB. However, the other iMX6 variants have 256KB of OCRAM. Add an option CONFIG_MX6_OCRAM_256KB which allows using the full size on boards which don't need to support the SL/DL variants. This allows for an SPL size of 196KB, which makes it much easier to use configurations such as SPL with driver model and FDT control. Signed-off-by: Robert Hancock --- Changed since v2: Remove "default n" in Kconfig since that is the default. arch/arm/mach-imx/mx6/Kconfig | 9 + common/spl/Kconfig| 3 ++- include/configs/imx6_spl.h| 28 ++-- 3 files changed, 37 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index fe5991e..9c27176 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -87,6 +87,15 @@ config MX6ULL select SYSCOUNTER_TIMER select SYS_L2CACHE_OFF +config MX6_OCRAM_256KB + bool "Support 256KB OCRAM" + depends on MX6D || MX6Q + help +Allows using the full 256KB size of the OCRAM on the MX6Q/MX6D series +of chips, such as for SPL. The OCRAM of the Lite series of chips is +only 128KB, so using this option will prevent the resulting code from +working on those chips. + config MX6_DDRCAL bool "Include dynamic DDR calibration routines" depends on SPL diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 54154b9..c5ad047 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -28,7 +28,8 @@ config SPL_FRAMEWORK config SPL_SIZE_LIMIT int "Maximum size of SPL image" depends on SPL - default 69632 if ARCH_MX6 + default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB + default 200704 if ARCH_MX6 && MX6_OCRAM_256KB default 0 help Specifies the maximum length of the U-Boot SPL image. diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 212dee7..a223930 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -7,10 +7,32 @@ #define __IMX6_SPL_CONFIG_H #ifdef CONFIG_SPL + +#ifdef CONFIG_MX6_OCRAM_256KB /* - * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals: + * see Figure 8.4.1 in IMX6DQ Reference manuals: + * - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093 + * - BOOT ROM stack is at 0x0093FFB8 + * - if icache/dcache is enabled (eFuse/strapping controlled) then the + *IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to + *fit between 0x00907000 and 0x00938000. + * - Additionally the BOOT ROM loads what they consider the firmware image + *which consists of a 4K header in front of us that contains the IVT, DCD + *and some padding thus 'our' max size is really 0x00908000 - 0x00938000 + *or 192KB + */ +#define CONFIG_SPL_MAX_SIZE0x3 +#define CONFIG_SPL_STACK 0x0093FFB8 +/* + * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the + * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a + * boot media (given that boot media specific offset is configured properly). + */ +#define CONFIG_SPL_PAD_TO 0x31000 +#else +/* + * see Figure 8-3 in IMX6SDL Reference manuals: * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091 - * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well * - BOOT ROM stack is at 0x0091FFB8 * - if icache/dcache is enabled (eFuse/strapping controlled) then the *IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to @@ -29,6 +51,8 @@ */ #define CONFIG_SPL_PAD_TO 0x11000 +#endif + /* MMC support */ #if defined(CONFIG_SPL_MMC_SUPPORT) #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -- 1.8.3.1 ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
