Re: [U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs
Hi Neil, On 25 November 2017 at 02:48, Neil Armstrongwrote: > Hi Tom, Simon, > > Le 22/11/2017 14:25, Neil Armstrong a écrit : >> This patchset aimed to add minimal support for the following Amlogic GXL SoC >> based board: >> - LibreTech-CC >> - Khadas VIM >> >> The initial support is composed of : >> - Minimal boot support with serial, MMC, Ethernet and SDCard >> - Updated DTS from Linux 4.13.8 >> >> Commands to generate a valid binary are provided in the board README. >> >> A common Ethernet init function is introduced to avoid duplicating >> the same hardware init code. >> >> The P212 and Odroid-C2 board are also converted to this common function >> by this patchset. >> >> The following work will be pushed later on : >> - Support for dynamic reading of DDR memory size from registers >> - USB DWC3 Host Support with PHY support > > > I'll try to address Simon's comments, but is it still possible > to have this merged for v2018.01 ? > > For the next release cycle, I'll try to add a proper clock driver > and have a look to binman for sure. From my side this seems fine. Regards, Simon ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs
Hi Tom, Simon, Le 22/11/2017 14:25, Neil Armstrong a écrit : > This patchset aimed to add minimal support for the following Amlogic GXL SoC > based board: > - LibreTech-CC > - Khadas VIM > > The initial support is composed of : > - Minimal boot support with serial, MMC, Ethernet and SDCard > - Updated DTS from Linux 4.13.8 > > Commands to generate a valid binary are provided in the board README. > > A common Ethernet init function is introduced to avoid duplicating > the same hardware init code. > > The P212 and Odroid-C2 board are also converted to this common function > by this patchset. > > The following work will be pushed later on : > - Support for dynamic reading of DDR memory size from registers > - USB DWC3 Host Support with PHY support I'll try to address Simon's comments, but is it still possible to have this merged for v2018.01 ? For the next release cycle, I'll try to add a proper clock driver and have a look to binman for sure. Neil > > Changes since v1: > - Add common ethernet init function > - Switch P212 and Odroid-C2 to use this ethernet init function > - Fix typos in READMEs > - Drop #define CONFIG_CONS_INDEX > > Neil Armstrong (5): > ARM: arch-meson: add ethernet common init function > board: odroid-c2: use common ethernet init function > board: p212: use common ethernet init function > arm: Add LibreTech CC support based on Meson GXL family > arm: Add Khadas VIM support based on Meson GXL family > > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 137 + > arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 > ++ > arch/arm/include/asm/arch-meson/eth.h | 15 +++ > arch/arm/mach-meson/Kconfig | 18 +++ > arch/arm/mach-meson/Makefile | 2 +- > arch/arm/mach-meson/eth.c | 53 > board/amlogic/khadas-vim/Kconfig | 12 ++ > board/amlogic/khadas-vim/MAINTAINERS | 6 + > board/amlogic/khadas-vim/Makefile | 8 ++ > board/amlogic/khadas-vim/README | 96 +++ > board/amlogic/khadas-vim/khadas-vim.c | 48 > board/amlogic/libretech-cc/Kconfig| 12 ++ > board/amlogic/libretech-cc/MAINTAINERS| 6 + > board/amlogic/libretech-cc/Makefile | 8 ++ > board/amlogic/libretech-cc/README | 96 +++ > board/amlogic/libretech-cc/libretech-cc.c | 52 > board/amlogic/odroid-c2/odroid-c2.c | 11 +- > board/amlogic/p212/p212.c | 14 +-- > configs/khadas-vim_defconfig | 35 ++ > configs/libretech-cc_defconfig| 35 ++ > include/configs/khadas-vim.h | 21 > include/configs/libretech-cc.h| 21 > 23 files changed, 858 insertions(+), 23 deletions(-) > create mode 100644 arch/arm/dts/meson-gxl-s905x-khadas-vim.dts > create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts > create mode 100644 arch/arm/include/asm/arch-meson/eth.h > create mode 100644 arch/arm/mach-meson/eth.c > create mode 100644 board/amlogic/khadas-vim/Kconfig > create mode 100644 board/amlogic/khadas-vim/MAINTAINERS > create mode 100644 board/amlogic/khadas-vim/Makefile > create mode 100644 board/amlogic/khadas-vim/README > create mode 100644 board/amlogic/khadas-vim/khadas-vim.c > create mode 100644 board/amlogic/libretech-cc/Kconfig > create mode 100644 board/amlogic/libretech-cc/MAINTAINERS > create mode 100644 board/amlogic/libretech-cc/Makefile > create mode 100644 board/amlogic/libretech-cc/README > create mode 100644 board/amlogic/libretech-cc/libretech-cc.c > create mode 100644 configs/khadas-vim_defconfig > create mode 100644 configs/libretech-cc_defconfig > create mode 100644 include/configs/khadas-vim.h > create mode 100644 include/configs/libretech-cc.h > ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
[U-Boot] [PATCH v2 0/5] Add support for Amlogic GXL Based SBCs
This patchset aimed to add minimal support for the following Amlogic GXL SoC based board: - LibreTech-CC - Khadas VIM The initial support is composed of : - Minimal boot support with serial, MMC, Ethernet and SDCard - Updated DTS from Linux 4.13.8 Commands to generate a valid binary are provided in the board README. A common Ethernet init function is introduced to avoid duplicating the same hardware init code. The P212 and Odroid-C2 board are also converted to this common function by this patchset. The following work will be pushed later on : - Support for dynamic reading of DDR memory size from registers - USB DWC3 Host Support with PHY support Changes since v1: - Add common ethernet init function - Switch P212 and Odroid-C2 to use this ethernet init function - Fix typos in READMEs - Drop #define CONFIG_CONS_INDEX Neil Armstrong (5): ARM: arch-meson: add ethernet common init function board: odroid-c2: use common ethernet init function board: p212: use common ethernet init function arm: Add LibreTech CC support based on Meson GXL family arm: Add Khadas VIM support based on Meson GXL family arch/arm/dts/Makefile | 4 +- arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 137 + arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 ++ arch/arm/include/asm/arch-meson/eth.h | 15 +++ arch/arm/mach-meson/Kconfig | 18 +++ arch/arm/mach-meson/Makefile | 2 +- arch/arm/mach-meson/eth.c | 53 board/amlogic/khadas-vim/Kconfig | 12 ++ board/amlogic/khadas-vim/MAINTAINERS | 6 + board/amlogic/khadas-vim/Makefile | 8 ++ board/amlogic/khadas-vim/README | 96 +++ board/amlogic/khadas-vim/khadas-vim.c | 48 board/amlogic/libretech-cc/Kconfig| 12 ++ board/amlogic/libretech-cc/MAINTAINERS| 6 + board/amlogic/libretech-cc/Makefile | 8 ++ board/amlogic/libretech-cc/README | 96 +++ board/amlogic/libretech-cc/libretech-cc.c | 52 board/amlogic/odroid-c2/odroid-c2.c | 11 +- board/amlogic/p212/p212.c | 14 +-- configs/khadas-vim_defconfig | 35 ++ configs/libretech-cc_defconfig| 35 ++ include/configs/khadas-vim.h | 21 include/configs/libretech-cc.h| 21 23 files changed, 858 insertions(+), 23 deletions(-) create mode 100644 arch/arm/dts/meson-gxl-s905x-khadas-vim.dts create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts create mode 100644 arch/arm/include/asm/arch-meson/eth.h create mode 100644 arch/arm/mach-meson/eth.c create mode 100644 board/amlogic/khadas-vim/Kconfig create mode 100644 board/amlogic/khadas-vim/MAINTAINERS create mode 100644 board/amlogic/khadas-vim/Makefile create mode 100644 board/amlogic/khadas-vim/README create mode 100644 board/amlogic/khadas-vim/khadas-vim.c create mode 100644 board/amlogic/libretech-cc/Kconfig create mode 100644 board/amlogic/libretech-cc/MAINTAINERS create mode 100644 board/amlogic/libretech-cc/Makefile create mode 100644 board/amlogic/libretech-cc/README create mode 100644 board/amlogic/libretech-cc/libretech-cc.c create mode 100644 configs/khadas-vim_defconfig create mode 100644 configs/libretech-cc_defconfig create mode 100644 include/configs/khadas-vim.h create mode 100644 include/configs/libretech-cc.h -- 2.7.4 ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot