Re: [U-Boot] [PATCH v2 2/3] board: at91sam9n12ek: Clean up code

2017-04-16 Thread Simon Glass 
On 12 April 2017 at 03:08, Wenyou Yang  wrote:
> Since the introduction of the pinctrl and clk driver and the device
> tree files, remove unneeded related code from the board file.
>
> Signed-off-by: Wenyou Yang 
> ---
>
> Changes in v2: None
>
>  board/atmel/at91sam9n12ek/at91sam9n12ek.c | 53 
> ---
>  1 file changed, 53 deletions(-)

Reviewed-by: Simon Glass 
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

[U-Boot] [PATCH v2 2/3] board: at91sam9n12ek: Clean up code

2017-04-12 Thread Wenyou Yang 
Since the introduction of the pinctrl and clk driver and the device
tree files, remove unneeded related code from the board file.

Signed-off-by: Wenyou Yang 
---

Changes in v2: None

 board/atmel/at91sam9n12ek/at91sam9n12ek.c | 53 ---
 1 file changed, 53 deletions(-)

diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c 
b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index e3f9cbbe50..02b7790627 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -15,7 +15,6 @@
 #include 
 #include 
 #include 
-#include 
 #include 
 
 #ifdef CONFIG_LCD_INFO
@@ -132,50 +131,6 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif /* CONFIG_LCD */
 
-/* SPI chip select control */
-#ifndef CONFIG_DM_SPI
-#ifdef CONFIG_ATMEL_SPI
-#include 
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-   return bus == 0 && cs < 2;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-   switch (slave->cs) {
-   case 0:
-   at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
-   break;
-   case 1:
-   at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
-   break;
-   }
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-   switch (slave->cs) {
-   case 0:
-   at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
-   break;
-   case 1:
-   at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
-   break;
-   }
-}
-#endif /* CONFIG_ATMEL_SPI */
-#endif
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(bd_t *bd)
-{
-   at91_mci_hw_init();
-
-   return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
-}
-#endif
-
 #ifdef CONFIG_KS8851_MLL
 void at91sam9n12ek_ks8851_hw_init(void)
 {
@@ -209,10 +164,6 @@ void at91sam9n12ek_usb_hw_init(void)
 
 int board_early_init_f(void)
 {
-   at91_periph_clk_enable(ATMEL_ID_PIOAB);
-   at91_periph_clk_enable(ATMEL_ID_PIOCD);
-
-   at91_seriald_hw_init();
return 0;
 }
 
@@ -225,10 +176,6 @@ int board_init(void)
at91sam9n12ek_nand_hw_init();
 #endif
 
-#ifdef CONFIG_ATMEL_SPI
-   at91_spi0_hw_init(1 << 0);
-#endif
-
 #ifdef CONFIG_LCD
at91_lcd_hw_init();
 #endif
-- 
2.11.0

___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot