Re: [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot
Dear Bo Shen, Hi Joel Fernandes, On 09/05/2013 07:55 AM, Joel Fernandes wrote: As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned on 4 byte boundaray causing data aborts in eth_setup - conf_buf during dhcp boot over usb_ether. Fix the issue my aligning control_req buffer using DEFINE_CACHE_ALIGN_BUFFER. Tested on am335x_evm platform (beaglebone). Applies on 2013.10-rc1 branch. Cc: Tom Rini tr...@ti.com Cc: Marek Vasut ma...@denx.de Signed-off-by: Joel Fernandes jo...@ti.com --- v2 changes: - Using DEFINE_CACHE_ALIGN_BUFFER macro for the alignment. - Also fixed alignment for status_req. v3 changes: - Adjusted commit message for v2 change. drivers/usb/gadget/ether.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) Test on sama5d3xek board with RNDIS gadget, it still has the unaligned access issue. However, I test with this patch usb: gadget: config: fix unaligned access issues from: Troy Kisky troy.ki...@boundarydevices.com really fix the unaligned access issue. more information at: http://patchwork.ozlabs.org/patch/264151/ Troy, care to fix up the patch's commit log so I can try and understand it? Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot
Dear Joel Fernandes, As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned on 4 byte boundaray causing data aborts in eth_setup - conf_buf during dhcp boot over usb_ether. Fix the issue my aligning control_req buffer using DEFINE_CACHE_ALIGN_BUFFER. Tested on am335x_evm platform (beaglebone). Applies on 2013.10-rc1 branch. Cc: Tom Rini tr...@ti.com Cc: Marek Vasut ma...@denx.de Signed-off-by: Joel Fernandes jo...@ti.com --- v2 changes: - Using DEFINE_CACHE_ALIGN_BUFFER macro for the alignment. - Also fixed alignment for status_req. v3 changes: - Adjusted commit message for v2 change. drivers/usb/gadget/ether.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 579893c..700d5fb 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -849,9 +849,10 @@ static struct usb_gadget_strings stringtab = { }; /* */ -static u8 control_req[USB_BUFSIZ]; +DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ); + #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS) -static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); +DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT); #endif Applied, thanks Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot
As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned on 4 byte boundaray causing data aborts in eth_setup - conf_buf during dhcp boot over usb_ether. Fix the issue my aligning control_req buffer using DEFINE_CACHE_ALIGN_BUFFER. Tested on am335x_evm platform (beaglebone). Applies on 2013.10-rc1 branch. Cc: Tom Rini tr...@ti.com Cc: Marek Vasut ma...@denx.de Signed-off-by: Joel Fernandes jo...@ti.com --- v2 changes: - Using DEFINE_CACHE_ALIGN_BUFFER macro for the alignment. - Also fixed alignment for status_req. v3 changes: - Adjusted commit message for v2 change. drivers/usb/gadget/ether.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 579893c..700d5fb 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -849,9 +849,10 @@ static struct usb_gadget_strings stringtab = { }; /**/ -static u8 control_req[USB_BUFSIZ]; +DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ); + #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS) -static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); +DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT); #endif -- 1.8.1.2 ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [PATCH v3] usb: gadget: Fix data aborts during USB ethernet boot
Hi Joel Fernandes, On 09/05/2013 07:55 AM, Joel Fernandes wrote: As seen on GCC 4.6 Linaro compiler, control_req buffer is not aligned on 4 byte boundaray causing data aborts in eth_setup - conf_buf during dhcp boot over usb_ether. Fix the issue my aligning control_req buffer using DEFINE_CACHE_ALIGN_BUFFER. Tested on am335x_evm platform (beaglebone). Applies on 2013.10-rc1 branch. Cc: Tom Rini tr...@ti.com Cc: Marek Vasut ma...@denx.de Signed-off-by: Joel Fernandes jo...@ti.com --- v2 changes: - Using DEFINE_CACHE_ALIGN_BUFFER macro for the alignment. - Also fixed alignment for status_req. v3 changes: - Adjusted commit message for v2 change. drivers/usb/gadget/ether.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) Test on sama5d3xek board with RNDIS gadget, it still has the unaligned access issue. However, I test with this patch usb: gadget: config: fix unaligned access issues from: Troy Kisky troy.ki...@boundarydevices.com really fix the unaligned access issue. more information at: http://patchwork.ozlabs.org/patch/264151/ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 579893c..700d5fb 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -849,9 +849,10 @@ static struct usb_gadget_strings stringtab = { }; /**/ -static u8 control_req[USB_BUFSIZ]; +DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ); + #if defined(CONFIG_USB_ETH_CDC) || defined(CONFIG_USB_ETH_RNDIS) -static u8 status_req[STATUS_BYTECOUNT] __attribute__ ((aligned(4))); +DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT); #endif Best Regards, Bo Shen ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot