On Tue, Jan 29, 2013 at 03:51:22PM -0800, Allen Martin wrote:
This series updates the tegra20 SPI driver to add fdt support and adds
a new tegra30 SPI driver.
Testing was done on trimslice (tegra20) and cardhu (tegra30).
Tom, this series applies cleanly on top of your T114 series.
Changes in v4:
-Added support for fdt aliases to slink driver
-Check status field of fdt node to make sure node is enabled
Changes in v3:
-Dropped some fdt patches from the series that were picked up in
u-boot-tegra/next already
-Removed SPI node from seaboard, added to trimslice
-Incorporated feedback from Simon Glass and Stephen Warren to slink
driver
Changes in v2:
-Added new patch to sort dts files prior to adding new nodes
-Moved max-spi-frequency out to board dts files
-Moved tegra20 SFLASH fdt changes out to separate patch
-Added valid flag to slink driver controller structure
Allen Martin (7):
tegra20: fdt: add SPI SFLASH node
tegra: spi: add fdt support to tegra SPI SFLASH driver
tegra30: add SBC1 to periph id mapping table
tegra30: fdt: add SPI SLINK nodes
tegra: add addresses of SPI SLINK controllers
tegra: add SPI SLINK driver
tegra: cardhu: config: enable SPI
arch/arm/cpu/tegra30-common/clock.c |2 +-
arch/arm/dts/tegra20.dtsi | 12 +
arch/arm/dts/tegra30.dtsi | 72 ++
arch/arm/include/asm/arch-tegra/tegra.h |6 +
arch/arm/include/asm/arch-tegra/tegra_slink.h | 84 ++
board/compulab/dts/tegra20-trimslice.dts |5 +
board/nvidia/common/board.c |3 +-
board/nvidia/dts/tegra30-cardhu.dts |5 +
drivers/spi/Makefile |1 +
drivers/spi/tegra_slink.c | 343
+
drivers/spi/tegra_spi.c | 45 +++-
include/configs/cardhu.h | 11 +
include/fdtdec.h |2 +
lib/fdtdec.c |2 +
14 files changed, 589 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra/tegra_slink.h
create mode 100644 drivers/spi/tegra_slink.c
--
1.7.10.4
-Allen
--
nvpublic
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
