Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
[PM] Hi Vignesh, On Fri, 8 Feb 2019 18:36:05 +0530 Vignesh R wrote: > On 07/02/19 6:13 PM, Jagan Teki wrote: > > On Tue, Feb 5, 2019 at 11:29 AM Vignesh R wrote: > [...] > >> > >> Vignesh R (20): > >> configs: Move CONFIG_SPI_FLASH into defconfigs > >> bitops: Fix GENMASK definition for Sandbox > >> spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes > >> spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size > >> spi: spi-mem: Claim SPI bus before spi mem access > >> spi: Add non DM version of SPI_MEM > >> sh: bitops: add hweight*() macros > >> mtd: spi: Port SPI NOR framework from Linux > >> mtd: spi: spi-nor-core: Add SPI MEM support > >> mtd: spi: spi-nor-core: Add 4 Byte addressing support > >> mtd: spi: spi-nor-core: Add SFDP support > >> mtd: spi: spi-nor-core: Add back U-Boot specific features > >> mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string > >> mtd: spi: Switch to new SPI NOR framework > >> mtd: spi: Remove unused files > >> mtd: spi: Add lightweight SPI flash stack for SPL > >> spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL > >> configs: Remove SF_DUAL_FLASH > >> configs: Don't use SPI_FLASH_BAR as default > >> MAINTAINERS: Add an entry for SPI NOR > > > > Update trivial change on this patch. > > > > Applied to u-boot-spi/master, thanks for the big changes and welcome aboard! > > > > Thanks Jagan! Thanks all for testing out this series > Kudos for getting this spi-nor port merged in u-boot! I hope you'll continue contributing to the Linux stack even though you're now the maintainer of the uboot version ;-). Regards, Boris ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On Wed, 13 Feb 2019 14:42:57 +0100 Boris Brezillon wrote: > [PM] Not so private actually :D. > Hi Vignesh, > > On Fri, 8 Feb 2019 18:36:05 +0530 > Vignesh R wrote: > > > On 07/02/19 6:13 PM, Jagan Teki wrote: > > > On Tue, Feb 5, 2019 at 11:29 AM Vignesh R wrote: > > [...] > > >> > > >> Vignesh R (20): > > >> configs: Move CONFIG_SPI_FLASH into defconfigs > > >> bitops: Fix GENMASK definition for Sandbox > > >> spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes > > >> spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size > > >> spi: spi-mem: Claim SPI bus before spi mem access > > >> spi: Add non DM version of SPI_MEM > > >> sh: bitops: add hweight*() macros > > >> mtd: spi: Port SPI NOR framework from Linux > > >> mtd: spi: spi-nor-core: Add SPI MEM support > > >> mtd: spi: spi-nor-core: Add 4 Byte addressing support > > >> mtd: spi: spi-nor-core: Add SFDP support > > >> mtd: spi: spi-nor-core: Add back U-Boot specific features > > >> mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string > > >> mtd: spi: Switch to new SPI NOR framework > > >> mtd: spi: Remove unused files > > >> mtd: spi: Add lightweight SPI flash stack for SPL > > >> spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL > > >> configs: Remove SF_DUAL_FLASH > > >> configs: Don't use SPI_FLASH_BAR as default > > >> MAINTAINERS: Add an entry for SPI NOR > > > > > > Update trivial change on this patch. > > > > > > Applied to u-boot-spi/master, thanks for the big changes and welcome > > > aboard! > > > > > > > Thanks Jagan! Thanks all for testing out this series > > > > Kudos for getting this spi-nor port merged in u-boot! > I hope you'll continue contributing to the Linux stack even though > you're now the maintainer of the uboot version ;-). > > Regards, > > Boris ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On 07/02/19 6:13 PM, Jagan Teki wrote: > On Tue, Feb 5, 2019 at 11:29 AM Vignesh R wrote: [...] >> >> Vignesh R (20): >> configs: Move CONFIG_SPI_FLASH into defconfigs >> bitops: Fix GENMASK definition for Sandbox >> spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes >> spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size >> spi: spi-mem: Claim SPI bus before spi mem access >> spi: Add non DM version of SPI_MEM >> sh: bitops: add hweight*() macros >> mtd: spi: Port SPI NOR framework from Linux >> mtd: spi: spi-nor-core: Add SPI MEM support >> mtd: spi: spi-nor-core: Add 4 Byte addressing support >> mtd: spi: spi-nor-core: Add SFDP support >> mtd: spi: spi-nor-core: Add back U-Boot specific features >> mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string >> mtd: spi: Switch to new SPI NOR framework >> mtd: spi: Remove unused files >> mtd: spi: Add lightweight SPI flash stack for SPL >> spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL >> configs: Remove SF_DUAL_FLASH >> configs: Don't use SPI_FLASH_BAR as default >> MAINTAINERS: Add an entry for SPI NOR > > Update trivial change on this patch. > > Applied to u-boot-spi/master, thanks for the big changes and welcome aboard! > Thanks Jagan! Thanks all for testing out this series -- Regards Vignesh ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On Tue, Feb 5, 2019 at 11:29 AM Vignesh R wrote: > > Here is the v4 of SPI NOR migration(github branch at [1]) with minor > cleanups > > Travis ci report: > https://travis-ci.org/r-vignesh/u-boot/builds/488868207 > > Change log: > Since v3: > Rebase on to the latest u-boot/master > Drop MODULE_LICENSE, EXPORT_SYMBOL_GPL macros > Make SPI_FLASH_BAR default for ZYNQ_QSPI as suggested by Jagan. > > Since v2: > Split sync up patches into smaller versions so that its easier for review. > Address comments by Jagan and Simon Goldschmidt on v2. > Make SPI_FLASH_TINY(read only SF stack) as default for SPL build to > offset against size increase due to new code. > > Since v1: > Remove #ifindef __UBOOT__ > Add back BAR support, but dont enable as default for all platform (see > 10/11 for more details) > Enable SPI_FLASH_TINY on boards where there is SPL size constraint as > seen on travis ci builds. > Drop sf_mtd changes for now as it seems to cause issues. > v1: https://patchwork.ozlabs.org/cover/1012146/ > > Since RFC v2: > Fix issues reported by Simon Goldschmidt wrt 4 use of byte addressing opcode > Fix issues in compiling SFDP code > Re organize file names and Makefile to simply spi-nor-tiny inclusion > Remove SPI_FLASH_BAR and SF_DUAL_FLASH as these are no longer used > RFC v2: https://patchwork.ozlabs.org/cover/1007589/ > > Since RFC v1: > Add lightweight SPI flash stack for boards with SPL size constraints > Provide non DM version of spi-mem > Fix build issues on different platforms as reported by travis-ci on v1 > > RFC v1: https://patchwork.ozlabs.org/cover/1004689/ > > Background: > > U-Boot SPI NOR support (sf layer) is quite outdated as it does not > support 4 byte addressing opcodes, SFDP table parsing and different types of > quad mode enable sequences. Many newer flashes no longer support BANK > registers used by sf layer to a access >16MB space. > Also, many SPI controllers have special MMIO interfaces which provide > accelerated read/write access but require knowledge of flash parameters > to make use of it. Recent spi-mem layer provides a way to support such > flashes but sf layer isn't using that. > This patch series syncs SPI NOR framework from Linux v4.19. It also adds > spi-mem support on top. > So, we gain 4byte addressing support and SFDP support. This makes > migrating to U-Boot MTD framework easier. > > Tested with few Spansion, micron and macronix flashes with TI's dra7xx, > k2g, am43xx EVMs. I dont have access to flashes from other vendors. So, > I would greatly appreciate testing on other platforms. Complete series > with dependencies here[1] > > [1] https://github.com/r-vignesh/u-boot.git branch: spi-nor-mig-patch-v4 > > Vignesh R (20): > configs: Move CONFIG_SPI_FLASH into defconfigs > bitops: Fix GENMASK definition for Sandbox > spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes > spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size > spi: spi-mem: Claim SPI bus before spi mem access > spi: Add non DM version of SPI_MEM > sh: bitops: add hweight*() macros > mtd: spi: Port SPI NOR framework from Linux > mtd: spi: spi-nor-core: Add SPI MEM support > mtd: spi: spi-nor-core: Add 4 Byte addressing support > mtd: spi: spi-nor-core: Add SFDP support > mtd: spi: spi-nor-core: Add back U-Boot specific features > mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string > mtd: spi: Switch to new SPI NOR framework > mtd: spi: Remove unused files > mtd: spi: Add lightweight SPI flash stack for SPL > spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL > configs: Remove SF_DUAL_FLASH > configs: Don't use SPI_FLASH_BAR as default > MAINTAINERS: Add an entry for SPI NOR Update trivial change on this patch. Applied to u-boot-spi/master, thanks for the big changes and welcome aboard! Jagan. ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On Wed, Feb 06, 2019 at 11:02:25PM +0530, Vignesh R wrote: > > > On 06-Feb-19 1:43 PM, Simon Goldschmidt wrote: > > On Tue, Feb 5, 2019 at 6:58 AM Vignesh R wrote: > >> > >> Here is the v4 of SPI NOR migration(github branch at [1]) with minor > >> cleanups > > > > I've just sanity-checked this again on socfpga_socrates: Everything > > still works and SPL is ~1.8 KiB smaller than without this patch. > > > > Thanks again for testing! > > Jagan, > > This is based on top of latest u-boot/master. Could this series be > queued now? Thanks! Yes please, thanks! -- Tom signature.asc Description: PGP signature ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On 06-Feb-19 1:43 PM, Simon Goldschmidt wrote: > On Tue, Feb 5, 2019 at 6:58 AM Vignesh R wrote: >> >> Here is the v4 of SPI NOR migration(github branch at [1]) with minor >> cleanups > > I've just sanity-checked this again on socfpga_socrates: Everything > still works and SPL is ~1.8 KiB smaller than without this patch. > Thanks again for testing! Jagan, This is based on top of latest u-boot/master. Could this series be queued now? Thanks! Regards Vignesh >> >> Travis ci report: >> https://travis-ci.org/r-vignesh/u-boot/builds/488868207 >> >> Change log: >> Since v3: >> Rebase on to the latest u-boot/master >> Drop MODULE_LICENSE, EXPORT_SYMBOL_GPL macros >> Make SPI_FLASH_BAR default for ZYNQ_QSPI as suggested by Jagan. >> >> Since v2: >> Split sync up patches into smaller versions so that its easier for review. >> Address comments by Jagan and Simon Goldschmidt on v2. >> Make SPI_FLASH_TINY(read only SF stack) as default for SPL build to >> offset against size increase due to new code. >> >> Since v1: >> Remove #ifindef __UBOOT__ >> Add back BAR support, but dont enable as default for all platform (see >> 10/11 for more details) >> Enable SPI_FLASH_TINY on boards where there is SPL size constraint as >> seen on travis ci builds. >> Drop sf_mtd changes for now as it seems to cause issues. >> v1: https://patchwork.ozlabs.org/cover/1012146/ >> >> Since RFC v2: >> Fix issues reported by Simon Goldschmidt wrt 4 use of byte addressing opcode >> Fix issues in compiling SFDP code >> Re organize file names and Makefile to simply spi-nor-tiny inclusion >> Remove SPI_FLASH_BAR and SF_DUAL_FLASH as these are no longer used >> RFC v2: https://patchwork.ozlabs.org/cover/1007589/ >> >> Since RFC v1: >> Add lightweight SPI flash stack for boards with SPL size constraints >> Provide non DM version of spi-mem >> Fix build issues on different platforms as reported by travis-ci on v1 >> >> RFC v1: https://patchwork.ozlabs.org/cover/1004689/ >> >> Background: >> >> U-Boot SPI NOR support (sf layer) is quite outdated as it does not >> support 4 byte addressing opcodes, SFDP table parsing and different types of >> quad mode enable sequences. Many newer flashes no longer support BANK >> registers used by sf layer to a access >16MB space. >> Also, many SPI controllers have special MMIO interfaces which provide >> accelerated read/write access but require knowledge of flash parameters >> to make use of it. Recent spi-mem layer provides a way to support such >> flashes but sf layer isn't using that. >> This patch series syncs SPI NOR framework from Linux v4.19. It also adds >> spi-mem support on top. >> So, we gain 4byte addressing support and SFDP support. This makes >> migrating to U-Boot MTD framework easier. >> >> Tested with few Spansion, micron and macronix flashes with TI's dra7xx, >> k2g, am43xx EVMs. I dont have access to flashes from other vendors. So, >> I would greatly appreciate testing on other platforms. Complete series >> with dependencies here[1] >> >> [1] https://github.com/r-vignesh/u-boot.git branch: spi-nor-mig-patch-v4 >> >> Vignesh R (20): >> configs: Move CONFIG_SPI_FLASH into defconfigs >> bitops: Fix GENMASK definition for Sandbox >> spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes >> spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size >> spi: spi-mem: Claim SPI bus before spi mem access >> spi: Add non DM version of SPI_MEM >> sh: bitops: add hweight*() macros >> mtd: spi: Port SPI NOR framework from Linux >> mtd: spi: spi-nor-core: Add SPI MEM support >> mtd: spi: spi-nor-core: Add 4 Byte addressing support >> mtd: spi: spi-nor-core: Add SFDP support >> mtd: spi: spi-nor-core: Add back U-Boot specific features >> mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string >> mtd: spi: Switch to new SPI NOR framework >> mtd: spi: Remove unused files >> mtd: spi: Add lightweight SPI flash stack for SPL >> spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL >> configs: Remove SF_DUAL_FLASH >> configs: Don't use SPI_FLASH_BAR as default >> MAINTAINERS: Add an entry for SPI NOR >> >> MAINTAINERS |9 + >> arch/arm/mach-omap2/am33xx/Kconfig|1 - >> arch/sh/include/asm/bitops.h |4 + >> common/spl/Kconfig| 23 +- >> configs/alt_defconfig |1 - >> configs/am57xx_evm_defconfig |1 - >> configs/am57xx_hs_evm_defconfig |1 - >> configs/ap121_defconfig |1 - >> configs/ap143_defconfig |1 - >> configs/avnet_ultra96_rev1_defconfig |1 - >> configs/axs101_defconfig |1 - >> configs/axs103_defconfig |1 - >> configs/bg0900_defconfig |1 - >> configs/blanche_defconfig |1 - >> configs/cgtqmx6eval_defconfig
Re: [U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
On Tue, Feb 5, 2019 at 6:58 AM Vignesh R wrote: > > Here is the v4 of SPI NOR migration(github branch at [1]) with minor > cleanups I've just sanity-checked this again on socfpga_socrates: Everything still works and SPL is ~1.8 KiB smaller than without this patch. Regargds, Simon > > Travis ci report: > https://travis-ci.org/r-vignesh/u-boot/builds/488868207 > > Change log: > Since v3: > Rebase on to the latest u-boot/master > Drop MODULE_LICENSE, EXPORT_SYMBOL_GPL macros > Make SPI_FLASH_BAR default for ZYNQ_QSPI as suggested by Jagan. > > Since v2: > Split sync up patches into smaller versions so that its easier for review. > Address comments by Jagan and Simon Goldschmidt on v2. > Make SPI_FLASH_TINY(read only SF stack) as default for SPL build to > offset against size increase due to new code. > > Since v1: > Remove #ifindef __UBOOT__ > Add back BAR support, but dont enable as default for all platform (see > 10/11 for more details) > Enable SPI_FLASH_TINY on boards where there is SPL size constraint as > seen on travis ci builds. > Drop sf_mtd changes for now as it seems to cause issues. > v1: https://patchwork.ozlabs.org/cover/1012146/ > > Since RFC v2: > Fix issues reported by Simon Goldschmidt wrt 4 use of byte addressing opcode > Fix issues in compiling SFDP code > Re organize file names and Makefile to simply spi-nor-tiny inclusion > Remove SPI_FLASH_BAR and SF_DUAL_FLASH as these are no longer used > RFC v2: https://patchwork.ozlabs.org/cover/1007589/ > > Since RFC v1: > Add lightweight SPI flash stack for boards with SPL size constraints > Provide non DM version of spi-mem > Fix build issues on different platforms as reported by travis-ci on v1 > > RFC v1: https://patchwork.ozlabs.org/cover/1004689/ > > Background: > > U-Boot SPI NOR support (sf layer) is quite outdated as it does not > support 4 byte addressing opcodes, SFDP table parsing and different types of > quad mode enable sequences. Many newer flashes no longer support BANK > registers used by sf layer to a access >16MB space. > Also, many SPI controllers have special MMIO interfaces which provide > accelerated read/write access but require knowledge of flash parameters > to make use of it. Recent spi-mem layer provides a way to support such > flashes but sf layer isn't using that. > This patch series syncs SPI NOR framework from Linux v4.19. It also adds > spi-mem support on top. > So, we gain 4byte addressing support and SFDP support. This makes > migrating to U-Boot MTD framework easier. > > Tested with few Spansion, micron and macronix flashes with TI's dra7xx, > k2g, am43xx EVMs. I dont have access to flashes from other vendors. So, > I would greatly appreciate testing on other platforms. Complete series > with dependencies here[1] > > [1] https://github.com/r-vignesh/u-boot.git branch: spi-nor-mig-patch-v4 > > Vignesh R (20): > configs: Move CONFIG_SPI_FLASH into defconfigs > bitops: Fix GENMASK definition for Sandbox > spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes > spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size > spi: spi-mem: Claim SPI bus before spi mem access > spi: Add non DM version of SPI_MEM > sh: bitops: add hweight*() macros > mtd: spi: Port SPI NOR framework from Linux > mtd: spi: spi-nor-core: Add SPI MEM support > mtd: spi: spi-nor-core: Add 4 Byte addressing support > mtd: spi: spi-nor-core: Add SFDP support > mtd: spi: spi-nor-core: Add back U-Boot specific features > mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string > mtd: spi: Switch to new SPI NOR framework > mtd: spi: Remove unused files > mtd: spi: Add lightweight SPI flash stack for SPL > spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL > configs: Remove SF_DUAL_FLASH > configs: Don't use SPI_FLASH_BAR as default > MAINTAINERS: Add an entry for SPI NOR > > MAINTAINERS |9 + > arch/arm/mach-omap2/am33xx/Kconfig|1 - > arch/sh/include/asm/bitops.h |4 + > common/spl/Kconfig| 23 +- > configs/alt_defconfig |1 - > configs/am57xx_evm_defconfig |1 - > configs/am57xx_hs_evm_defconfig |1 - > configs/ap121_defconfig |1 - > configs/ap143_defconfig |1 - > configs/avnet_ultra96_rev1_defconfig |1 - > configs/axs101_defconfig |1 - > configs/axs103_defconfig |1 - > configs/bg0900_defconfig |1 - > configs/blanche_defconfig |1 - > configs/cgtqmx6eval_defconfig |1 + > configs/chromebit_mickey_defconfig|1 + > configs/chromebook_jerry_defconfig|1 + > configs/chromebook_minnie_defconfig |1 + > configs/cl-som-am57x_defconfig|1 - > configs/clearfog_defconfi
[U-Boot] [PATCH v4 00/20] SF: Migrate to Linux SPI NOR framework
Here is the v4 of SPI NOR migration(github branch at [1]) with minor cleanups Travis ci report: https://travis-ci.org/r-vignesh/u-boot/builds/488868207 Change log: Since v3: Rebase on to the latest u-boot/master Drop MODULE_LICENSE, EXPORT_SYMBOL_GPL macros Make SPI_FLASH_BAR default for ZYNQ_QSPI as suggested by Jagan. Since v2: Split sync up patches into smaller versions so that its easier for review. Address comments by Jagan and Simon Goldschmidt on v2. Make SPI_FLASH_TINY(read only SF stack) as default for SPL build to offset against size increase due to new code. Since v1: Remove #ifindef __UBOOT__ Add back BAR support, but dont enable as default for all platform (see 10/11 for more details) Enable SPI_FLASH_TINY on boards where there is SPL size constraint as seen on travis ci builds. Drop sf_mtd changes for now as it seems to cause issues. v1: https://patchwork.ozlabs.org/cover/1012146/ Since RFC v2: Fix issues reported by Simon Goldschmidt wrt 4 use of byte addressing opcode Fix issues in compiling SFDP code Re organize file names and Makefile to simply spi-nor-tiny inclusion Remove SPI_FLASH_BAR and SF_DUAL_FLASH as these are no longer used RFC v2: https://patchwork.ozlabs.org/cover/1007589/ Since RFC v1: Add lightweight SPI flash stack for boards with SPL size constraints Provide non DM version of spi-mem Fix build issues on different platforms as reported by travis-ci on v1 RFC v1: https://patchwork.ozlabs.org/cover/1004689/ Background: U-Boot SPI NOR support (sf layer) is quite outdated as it does not support 4 byte addressing opcodes, SFDP table parsing and different types of quad mode enable sequences. Many newer flashes no longer support BANK registers used by sf layer to a access >16MB space. Also, many SPI controllers have special MMIO interfaces which provide accelerated read/write access but require knowledge of flash parameters to make use of it. Recent spi-mem layer provides a way to support such flashes but sf layer isn't using that. This patch series syncs SPI NOR framework from Linux v4.19. It also adds spi-mem support on top. So, we gain 4byte addressing support and SFDP support. This makes migrating to U-Boot MTD framework easier. Tested with few Spansion, micron and macronix flashes with TI's dra7xx, k2g, am43xx EVMs. I dont have access to flashes from other vendors. So, I would greatly appreciate testing on other platforms. Complete series with dependencies here[1] [1] https://github.com/r-vignesh/u-boot.git branch: spi-nor-mig-patch-v4 Vignesh R (20): configs: Move CONFIG_SPI_FLASH into defconfigs bitops: Fix GENMASK definition for Sandbox spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes spi: spi-mem: Extend spi_mem_adjust_op_size() to honor max xfer size spi: spi-mem: Claim SPI bus before spi mem access spi: Add non DM version of SPI_MEM sh: bitops: add hweight*() macros mtd: spi: Port SPI NOR framework from Linux mtd: spi: spi-nor-core: Add SPI MEM support mtd: spi: spi-nor-core: Add 4 Byte addressing support mtd: spi: spi-nor-core: Add SFDP support mtd: spi: spi-nor-core: Add back U-Boot specific features mtd: spi: sf_probe: Add "jedec,spi-nor" compatible string mtd: spi: Switch to new SPI NOR framework mtd: spi: Remove unused files mtd: spi: Add lightweight SPI flash stack for SPL spl: Kconfig: Enable SPI_FLASH_TINY by default for SPL configs: Remove SF_DUAL_FLASH configs: Don't use SPI_FLASH_BAR as default MAINTAINERS: Add an entry for SPI NOR MAINTAINERS |9 + arch/arm/mach-omap2/am33xx/Kconfig|1 - arch/sh/include/asm/bitops.h |4 + common/spl/Kconfig| 23 +- configs/alt_defconfig |1 - configs/am57xx_evm_defconfig |1 - configs/am57xx_hs_evm_defconfig |1 - configs/ap121_defconfig |1 - configs/ap143_defconfig |1 - configs/avnet_ultra96_rev1_defconfig |1 - configs/axs101_defconfig |1 - configs/axs103_defconfig |1 - configs/bg0900_defconfig |1 - configs/blanche_defconfig |1 - configs/cgtqmx6eval_defconfig |1 + configs/chromebit_mickey_defconfig|1 + configs/chromebook_jerry_defconfig|1 + configs/chromebook_minnie_defconfig |1 + configs/cl-som-am57x_defconfig|1 - configs/clearfog_defconfig|1 - configs/cm_t43_defconfig |1 - configs/db-88f6820-amc_defconfig |1 - configs/display5_defconfig|1 - configs/display5_factory_defconfig|1 - configs/dra7xx_evm_defconfig |1 - configs/dra7xx_hs_evm_defconfig |1 - configs/ds109_defconfig