From: Jagan Teki <ja...@amarulasolutions.com>
Add I2C support for Engicam GEAM6UL module.
geam6ul> i2c bus
Bus 0: i2c@021a0000
Bus 1: i2c@021a4000
geam6ul> i2c dev 0
Setting bus to 0
geam6ul> i2c dev
Current bus is 0
geam6ul> i2c speed 100000
Setting bus speed to 100000 Hz
geam6ul> i2c probe
Valid chip addresses: 2C
geam6ul> i2c md 2C 0xff
00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00 .......d........
Cc: Stefano Babic <sba...@denx.de>
Cc: Matteo Lisi <matteo.l...@engicam.com>
Cc: Michael Trimarchi <mich...@amarulasolutions.com>
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
arch/arm/cpu/armv7/mx6/Kconfig | 1 +
configs/imx6ul_geam_mmc_defconfig | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 4ba5338..bbdb5a1 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -163,6 +163,7 @@ config TARGET_MX6UL_GEAM
select OF_CONTROL
select DM
select DM_GPIO
+ select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
diff --git a/configs/imx6ul_geam_mmc_defconfig
b/configs/imx6ul_geam_mmc_defconfig
index 24f3fd6..e1e1dd2 100644
--- a/configs/imx6ul_geam_mmc_defconfig
+++ b/configs/imx6ul_geam_mmc_defconfig
@@ -25,11 +25,13 @@ CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_CMD_I2C=y
CONFIG_OF_LIBFDT=y
CONFIG_MXC_UART=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
