[U-Boot] [PATCH v4 11/29] zynq: Add zynq zc70x board support

2014-01-08 Thread Jagannadha Sutradharudu Teki 
The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control  I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control  I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
 boards.cfg|  1 +
 include/configs/zynq-common.h |  9 -
 include/configs/zynq_zc70x.h  | 25 +
 3 files changed, 26 insertions(+), 9 deletions(-)
 create mode 100644 include/configs/zynq_zc70x.h

diff --git a/boards.cfg b/boards.cfg
index faaac0a..5ef2045 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -354,6 +354,7 @@ Active  arm armv7  socfpga altera   
   socfpga
 Active  arm armv7  u8500   st-ericsson snowball
snowball -  

   Mathieu Poirier mathieu.poir...@linaro.org
 Active  arm armv7  u8500   st-ericsson u8500   
u8500_href   -  

   -
 Active  arm armv7  vf610   freescale   vf610twr
vf610twr 
vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg   
  Alison Wang 
b18...@freescale.com
+Active  armarmv7  zynqxilinx  zynq 
   zynq_zc70x   -   

  Michal Simek mon...@monstr.eu:Jagannadha Sutradharudu Teki 
jaga...@xilinx.com
 Active  arm armv7:arm720t  tegra114nvidia  dalmore 
dalmore  -  

   Tom Warren twar...@nvidia.com
 Active  arm armv7:arm720t  tegra20 avionic-design  medcom-wide 
medcom-wide  -  

   Thierry Reding thierry.red...@avionic-design.de
 Active  arm armv7:arm720t  tegra20 avionic-design  plutux  
plutux   -  

   Thierry Reding thierry.red...@avionic-design.de
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 9fe06e8..bce1094 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -36,7 +36,6 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
 #ifdef CONFIG_ZYNQ_SERIAL_UART0
 # define CONFIG_ZYNQ_SERIAL_BASEADDR0  0xE000
 # define CONFIG_ZYNQ_SERIAL_BAUDRATE0  CONFIG_BAUDRATE
@@ -60,8 +59,6 @@
 #endif
 
 /* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0  7
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
 # define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
@@ -71,7 +68,6 @@
 # define CONFIG_PHY_MARVELL
 #endif
 
-#define CONFIG_ZYNQ_SPI
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
 # define CONFIG_SPI_FLASH
@@ -79,10 +75,6 @@
 # define CONFIG_CMD_SF
 #endif
 
-/* NOR */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
 /* MMC */
 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 # define CONFIG_MMC
@@ -96,7 +88,6 @@
 # define CONFIG_DOS_PARTITION
 #endif
 
-#define CONFIG_ZYNQ_I2C0
 /* I2C */
 #if

[U-Boot] [PATCH v4 11/29] zynq: Add zynq zc70x board support

2013-12-20 Thread Jagannadha Sutradharudu Teki 
The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded
processing includes ASIC and FPGA design.

ZC702-:

APSOC:
- XC7Z020-CLG484-1
Memory:
- DDR3 Component Memory 1GB
- 16MB Quad SPI Flash
- IIC - 1 KB EEPROM
Connectivity:
- Gigabit Ethernet GMII, RGMII and SGMII.
- USB OTG - Host USB
- IIC Bus Headers/HUB
- 1 CAN with Wake on CAN
- USB-UART
Video/Display:
- HDMI Video OUT
- 8X LEDs
Control  I/O:
- 3 User Push Buttons
- 2 User Switches
- 8 User LEDs

For more info on zc702 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm

ZC706-:

APSOC:
- XC7Z045 FFG900 -2 AP SoC
Memory:
- DDR3 Component Memory 1GB (PS)
- DDR3 SODIM Memory 1GB (PL)
- 2X16MB Quad SPI Flash (dual parallel)
- IIC - 1 KB EEPROM
Connectivity:
- PCIe Gen2x4
- SFP+ and SMA Pairs
- GigE RGMII Ethernet (PS)
- USB OTG 1 (PS) - Host USB
- IIC Bus Headers/HUB (PS)
- 1 CAN with Wake on CAN (PS)
- USB-UART
Video/Display:
- HDMI 8 color RGB 4.4.4 1080P-60 OUT
- HDMI IN 8 color RGB 4.4.4
Control  I/O:
- 2 User Push Buttons/Dip Switch, 2 User LEDs
- IIC access to GPIO
- SDIO (SD Card slot)
- 3 User Push Buttons, 2 User Switches, 8 User LEDs

For more info on zc706 board:
- http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm

Signed-off-by: Jagannadha Sutradharudu Teki jaga...@xilinx.com
---
V4: Removed CONFIG_SYS_NO_FLASH in zynq-common.h
V3: Removed CONFIG_SPI_ZYNQ
V2: none
 boards.cfg|  1 +
 include/configs/zynq-common.h |  9 -
 include/configs/zynq_zc70x.h  | 25 +
 3 files changed, 26 insertions(+), 9 deletions(-)
 create mode 100644 include/configs/zynq_zc70x.h

diff --git a/boards.cfg b/boards.cfg
index 60165a1..2a1d6a4 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -354,6 +354,7 @@ Active  arm armv7  socfpga altera   
   socfpga
 Active  arm armv7  u8500   st-ericsson snowball
snowball -  

   Mathieu Poirier mathieu.poir...@linaro.org
 Active  arm armv7  u8500   st-ericsson u8500   
u8500_href   -  

   -
 Active  arm armv7  vf610   freescale   vf610twr
vf610twr 
vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg   
  Alison Wang 
b18...@freescale.com
+Active  armarmv7  zynqxilinx  zynq 
   zynq_zc70x   -   

  Michal Simek mon...@monstr.eu:Jagannadha Sutradharudu Teki 
jaga...@xilinx.com
 Active  arm armv7:arm720t  tegra114nvidia  dalmore 
dalmore  -  

   Tom Warren twar...@nvidia.com
 Active  arm armv7:arm720t  tegra20 avionic-design  medcom-wide 
medcom-wide  -  

   Thierry Reding thierry.red...@avionic-design.de
 Active  arm armv7:arm720t  tegra20 avionic-design  plutux  
plutux   -  

   Thierry Reding thierry.red...@avionic-design.de
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 9fe06e8..bce1094 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -36,7 +36,6 @@
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
 #ifdef CONFIG_ZYNQ_SERIAL_UART0
 # define CONFIG_ZYNQ_SERIAL_BASEADDR0  0xE000
 # define CONFIG_ZYNQ_SERIAL_BAUDRATE0  CONFIG_BAUDRATE
@@ -60,8 +59,6 @@
 #endif
 
 /* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0  7
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
 # define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
@@ -71,7 +68,6 @@
 # define CONFIG_PHY_MARVELL
 #endif
 
-#define CONFIG_ZYNQ_SPI
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
 # define CONFIG_SPI_FLASH
@@ -79,10 +75,6 @@
 # define CONFIG_CMD_SF
 #endif
 
-/* NOR */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
 /* MMC */
 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
 # define CONFIG_MMC
@@ -96,7 +88,6 @@
 # define