BD71837 and BD71847 is PMIC intended for powering single-core,
dual-core, and quad-core SoC’s such as NXP-i.MX 8M. BD71847
is used for example on NXP imx8mm EVK.
Add regulator driver for ROHM BD71837 and BD71847 PMICs.
BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced
version containing 6 bucks and 6 LDOs. Voltages for DVS
bucks (1-4 on BD71837, 1 and 2 on BD71847) can be adjusted
when regulators are enabled. For other bucks and LDOs we may
have over- or undershooting if voltage is adjusted when
regulator is enabled. Thus this is prevented by default.
BD718x7 has a quirk which may leave power output disabled
after reset if enable/disable state was controlled by SW.
Thus the SW control is only allowed for BD71837 bucks
3 and 4 by default. The impact of this limitation must be
evaluated board-by board and restrictions may need to be
modified. (Linux driver get's these limitations from DT and we
may want to implement same on u-Boot driver).
Signed-off-by: Matti Vaittinen
---
Changelog v3 => v4:
- prefer u8 over uint8_t
- prefer types with natural alignment over u8 on function arguments
- remove inclusion of errno.h from drivers/power/regulator/bd71837.c
drivers/power/pmic/bd71837.c | 32 +-
drivers/power/regulator/Kconfig | 17 ++
drivers/power/regulator/Makefile | 1 +
drivers/power/regulator/bd71837.c | 468 ++
include/power/bd71837.h | 147 ++
5 files changed, 607 insertions(+), 58 deletions(-)
create mode 100644 drivers/power/regulator/bd71837.c
diff --git a/drivers/power/pmic/bd71837.c b/drivers/power/pmic/bd71837.c
index 24d9f7fab7..e292d42a8c 100644
--- a/drivers/power/pmic/bd71837.c
+++ b/drivers/power/pmic/bd71837.c
@@ -3,6 +3,8 @@
* Copyright 2018 NXP
*/
+#define DEBUG
+
#include
#include
#include
@@ -15,15 +17,15 @@ DECLARE_GLOBAL_DATA_PTR;
static const struct pmic_child_info pmic_children_info[] = {
/* buck */
- { .prefix = "b", .driver = BD71837_REGULATOR_DRIVER},
+ { .prefix = "b", .driver = BD718XX_REGULATOR_DRIVER},
/* ldo */
- { .prefix = "l", .driver = BD71837_REGULATOR_DRIVER},
+ { .prefix = "l", .driver = BD718XX_REGULATOR_DRIVER},
{ },
};
static int bd71837_reg_count(struct udevice *dev)
{
- return BD71837_REG_NUM;
+ return BD718XX_MAX_REGISTER - 1;
}
static int bd71837_write(struct udevice *dev, uint reg, const uint8_t *buff,
@@ -54,7 +56,7 @@ static int bd71837_bind(struct udevice *dev)
regulators_node = dev_read_subnode(dev, "regulators");
if (!ofnode_valid(regulators_node)) {
- debug("%s: %s regulators subnode not found!", __func__,
+ debug("%s: %s regulators subnode not found!\n", __func__,
dev->name);
return -ENXIO;
}
@@ -69,6 +71,24 @@ static int bd71837_bind(struct udevice *dev)
return 0;
}
+static int bd718x7_probe(struct udevice *dev)
+{
+ int ret;
+ uint8_t mask = BD718XX_REGLOCK_PWRSEQ | BD718XX_REGLOCK_VREG;
+
+ /* Unlock the PMIC regulator control before probing the children */
+ ret = pmic_clrsetbits(dev, BD718XX_REGLOCK, mask, 0);
+ if (ret) {
+ debug("%s: %s Failed to unlock regulator control\n", __func__,
+ dev->name);
+ return ret;
+ }
+ debug("%s: '%s' - BD718x7 PMIC registers unlocked\n", __func__,
+ dev->name);
+
+ return 0;
+}
+
static struct dm_pmic_ops bd71837_ops = {
.reg_count = bd71837_reg_count,
.read = bd71837_read,
@@ -76,7 +96,8 @@ static struct dm_pmic_ops bd71837_ops = {
};
static const struct udevice_id bd71837_ids[] = {
- { .compatible = "rohm,bd71837", .data = 0x4b, },
+ { .compatible = "rohm,bd71837", .data = ROHM_CHIP_TYPE_BD71837, },
+ { .compatible = "rohm,bd71847", .data = ROHM_CHIP_TYPE_BD71847, },
{ }
};
@@ -85,5 +106,6 @@ U_BOOT_DRIVER(pmic_bd71837) = {
.id = UCLASS_PMIC,
.of_match = bd71837_ids,
.bind = bd71837_bind,
+ .probe = bd718x7_probe,
.ops = &bd71837_ops,
};
diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig
index 3ed0dd2264..4687bee09c 100644
--- a/drivers/power/regulator/Kconfig
+++ b/drivers/power/regulator/Kconfig
@@ -43,6 +43,23 @@ config REGULATOR_AS3722
but does not yet support change voltages. Currently this must be
done using direct register writes to the PMIC.
+config DM_REGULATOR_BD71837
+ bool "Enable Driver Model for ROHM BD71837/BD71847 regulators"
+ depends on DM_REGULATOR && DM_PMIC_BD71837
+ help
+ This config enables implementation of driver-model regulator uclass
+ features for regulators on ROHM BD71837 and BD71847 PMICs.
+ BD71837 contains 8 bucks and 7 LDOS. BD71847 is reduced version
+ containing 6 bucks and 6 LDOs. The driver implements get/set api for
+ value and ena