Re: [U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops
Hi Jagan! Any comments? On Tue, 2018-04-10 at 14:40 +0300, Eugeniy Paltsev wrote: > sst26wf flash series block protection implementation differs > from other SST series, so add specific implementation > flash_lock/flash_unlock/flash_is_locked functions for sst26wf > flash ICs. > > Signed-off-by: Eugeniy Paltsev> --- > Changes v4->v5: > * Return EACCES when flash is locked instead of custom define (SF_LOCKED) > * Add SST26_CTL_* prefix to sst27 lock ops enum. > * Move all sst26 code inside of existing CONFIG_SPI_FLASH_SST #ifdef. > > Changes v3->v4: > * Make sst26_process_bpr() and sst26_lock_ctl() functions static. > > Changes v2->v3: > * Move SST26 command defenition to sf_internal.h > * Merge sst26_set_bpr, sst26_clear_bpr and sst26_check_bpr functions >into single sst26_process_bpr function. > * Use SF_UNLOCKED/SF_LOCKED instead of magic numbers in >sst26_lock_ctl() > > Changes v1->v2: > * Use generic defines from linux/sizes.h instead of custom ones. > > diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c [snip] -- Eugeniy Paltsev ___ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Re: [U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops
Hi Jagan, Maybe you have any comments or remarks about this patch? And if you don't could you please apply it. Thanks! On Tue, 2018-04-10 at 14:40 +0300, Eugeniy Paltsev wrote: > sst26wf flash series block protection implementation differs > from other SST series, so add specific implementation > flash_lock/flash_unlock/flash_is_locked functions for sst26wf > flash ICs. > > Signed-off-by: Eugeniy Paltsev> --- > Changes v4->v5: > * Return EACCES when flash is locked instead of custom define (SF_LOCKED) > * Add SST26_CTL_* prefix to sst27 lock ops enum. > * Move all sst26 code inside of existing CONFIG_SPI_FLASH_SST #ifdef. > > Changes v3->v4: > * Make sst26_process_bpr() and sst26_lock_ctl() functions static. > > Changes v2->v3: > * Move SST26 command defenition to sf_internal.h > * Merge sst26_set_bpr, sst26_clear_bpr and sst26_check_bpr functions >into single sst26_process_bpr function. > * Use SF_UNLOCKED/SF_LOCKED instead of magic numbers in >sst26_lock_ctl() > > Changes v1->v2: > * Use generic defines from linux/sizes.h instead of custom ones. > > drivers/mtd/spi/sf_internal.h | 13 > drivers/mtd/spi/spi_flash.c | 168 > ++ > 2 files changed, 181 insertions(+) > > diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h > index 839cdbe1b0..614a293234 100644 > --- a/drivers/mtd/spi/sf_internal.h > +++ b/drivers/mtd/spi/sf_internal.h > @@ -87,6 +87,19 @@ enum spi_nor_option_flags { > > /* SST specific */ > #ifdef CONFIG_SPI_FLASH_SST > +#define SST26_CMD_READ_BPR 0x72 > +#define SST26_CMD_WRITE_BPR 0x42 > + > +#define SST26_BPR_8K_NUM 4 > +#define SST26_MAX_BPR_REG_LEN(18 + 1) > +#define SST26_BOUND_REG_SIZE ((32 + SST26_BPR_8K_NUM * 8) * SZ_1K) > + > +enum lock_ctl { > + SST26_CTL_LOCK, > + SST26_CTL_UNLOCK, > + SST26_CTL_CHECK > +}; > + > # define CMD_SST_BP 0x02/* Byte Program */ > # define CMD_SST_AAI_WP 0xAD/* Auto Address Incr Word > Program */ > > diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c > index 2e61685d3e..5e5bd5d533 100644 > --- a/drivers/mtd/spi/spi_flash.c > +++ b/drivers/mtd/spi/spi_flash.c > @@ -16,6 +16,7 @@ > #include > #include > #include > +#include > #include > > #include "sf_internal.h" > @@ -541,6 +542,164 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 > offset, > } > > #ifdef CONFIG_SPI_FLASH_SST > +static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl > ctl) > +{ > + switch (ctl) { > + case SST26_CTL_LOCK: > + cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8); > + break; > + case SST26_CTL_UNLOCK: > + cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8); > + break; > + case SST26_CTL_CHECK: > + return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8)); > + } > + > + return false; > +} > + > +/* > + * sst26wf016/sst26wf032/sst26wf064 have next block protection: > + * 4x - 8 KByte blocks - read & write protection bits - upper addresses > + * 1x - 32 KByte blocks - write protection bits > + * rest - 64 KByte blocks - write protection bits > + * 1x - 32 KByte blocks - write protection bits > + * 4x - 8 KByte blocks - read & write protection bits - lower addresses > + * > + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region > + * will be treated as single block. > + */ > + > +/* > + * Lock, unlock or check lock status of the flash region of the flash > (depending > + * on the lock_ctl value) > + */ > +static int sst26_lock_ctl(struct spi_flash *flash, u32 ofs, size_t len, enum > lock_ctl ctl) > +{ > + u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size; > + bool lower_64k = false, upper_64k = false; > + u8 cmd, bpr_buff[SST26_MAX_BPR_REG_LEN] = {}; > + int ret; > + > + /* Check length and offset for 64k alignment */ > + if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) > + return -EINVAL; > + > + if (ofs + len > flash->size) > + return -EINVAL; > + > + /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */ > + if (flash->size != SZ_2M && > + flash->size != SZ_4M && > + flash->size != SZ_8M) > + return -EINVAL; > + > + bpr_size = 2 + (flash->size / SZ_64K / 8); > + > + cmd = SST26_CMD_READ_BPR; > + ret = spi_flash_read_common(flash, , 1, bpr_buff, bpr_size); > + if (ret < 0) { > + printf("SF: fail to read block-protection register\n"); > + return ret; > + } > + > + rptr_64k = min_t(u32, ofs + len , flash->size - SST26_BOUND_REG_SIZE); > + lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE); > + > + upper_64k = ((ofs + len) > (flash->size - SST26_BOUND_REG_SIZE)); > +
[U-Boot] [PATCH v5 1/2] SPI Flash: add support of sst26wf* flash ICs protection ops
sst26wf flash series block protection implementation differs from other SST series, so add specific implementation flash_lock/flash_unlock/flash_is_locked functions for sst26wf flash ICs. Signed-off-by: Eugeniy Paltsev--- Changes v4->v5: * Return EACCES when flash is locked instead of custom define (SF_LOCKED) * Add SST26_CTL_* prefix to sst27 lock ops enum. * Move all sst26 code inside of existing CONFIG_SPI_FLASH_SST #ifdef. Changes v3->v4: * Make sst26_process_bpr() and sst26_lock_ctl() functions static. Changes v2->v3: * Move SST26 command defenition to sf_internal.h * Merge sst26_set_bpr, sst26_clear_bpr and sst26_check_bpr functions into single sst26_process_bpr function. * Use SF_UNLOCKED/SF_LOCKED instead of magic numbers in sst26_lock_ctl() Changes v1->v2: * Use generic defines from linux/sizes.h instead of custom ones. drivers/mtd/spi/sf_internal.h | 13 drivers/mtd/spi/spi_flash.c | 168 ++ 2 files changed, 181 insertions(+) diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 839cdbe1b0..614a293234 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -87,6 +87,19 @@ enum spi_nor_option_flags { /* SST specific */ #ifdef CONFIG_SPI_FLASH_SST +#define SST26_CMD_READ_BPR 0x72 +#define SST26_CMD_WRITE_BPR0x42 + +#define SST26_BPR_8K_NUM 4 +#define SST26_MAX_BPR_REG_LEN (18 + 1) +#define SST26_BOUND_REG_SIZE ((32 + SST26_BPR_8K_NUM * 8) * SZ_1K) + +enum lock_ctl { + SST26_CTL_LOCK, + SST26_CTL_UNLOCK, + SST26_CTL_CHECK +}; + # define CMD_SST_BP0x02/* Byte Program */ # define CMD_SST_AAI_WP0xAD/* Auto Address Incr Word Program */ diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 2e61685d3e..5e5bd5d533 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "sf_internal.h" @@ -541,6 +542,164 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, } #ifdef CONFIG_SPI_FLASH_SST +static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl) +{ + switch (ctl) { + case SST26_CTL_LOCK: + cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8); + break; + case SST26_CTL_UNLOCK: + cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8); + break; + case SST26_CTL_CHECK: + return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8)); + } + + return false; +} + +/* + * sst26wf016/sst26wf032/sst26wf064 have next block protection: + * 4x - 8 KByte blocks - read & write protection bits - upper addresses + * 1x - 32 KByte blocks - write protection bits + * rest - 64 KByte blocks - write protection bits + * 1x - 32 KByte blocks - write protection bits + * 4x - 8 KByte blocks - read & write protection bits - lower addresses + * + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region + * will be treated as single block. + */ + +/* + * Lock, unlock or check lock status of the flash region of the flash (depending + * on the lock_ctl value) + */ +static int sst26_lock_ctl(struct spi_flash *flash, u32 ofs, size_t len, enum lock_ctl ctl) +{ + u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size; + bool lower_64k = false, upper_64k = false; + u8 cmd, bpr_buff[SST26_MAX_BPR_REG_LEN] = {}; + int ret; + + /* Check length and offset for 64k alignment */ + if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) + return -EINVAL; + + if (ofs + len > flash->size) + return -EINVAL; + + /* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */ + if (flash->size != SZ_2M && + flash->size != SZ_4M && + flash->size != SZ_8M) + return -EINVAL; + + bpr_size = 2 + (flash->size / SZ_64K / 8); + + cmd = SST26_CMD_READ_BPR; + ret = spi_flash_read_common(flash, , 1, bpr_buff, bpr_size); + if (ret < 0) { + printf("SF: fail to read block-protection register\n"); + return ret; + } + + rptr_64k = min_t(u32, ofs + len , flash->size - SST26_BOUND_REG_SIZE); + lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE); + + upper_64k = ((ofs + len) > (flash->size - SST26_BOUND_REG_SIZE)); + lower_64k = (ofs < SST26_BOUND_REG_SIZE); + + /* Lower bits in block-protection register are about 64k region */ + bpr_ptr = lptr_64k / SZ_64K - 1; + + /* Process 64K blocks region */ + while (lptr_64k < rptr_64k) { + if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl)) + return EACCES; + + bpr_ptr++; +