From: Shaohui Xie <shaohui....@freescale.com>

codes related to phylib operations should be wrapped by CONFIG_PHYLIB.

Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
Signed-off-by: Gong Qianyu <qianyu.g...@freescale.com>
---
V7:
 - No change.
V6:
 - Fix all codes related to phylib to be wrapped by CONFIG_PHYLIB.
V5:
 - No change.
V4:
 - No change.
V3:
 - New patch.

 drivers/net/fm/eth.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index d7d064b..e262859 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -95,6 +95,7 @@ static void dtsec_init_phy(struct eth_device *dev)
                dtsec_configure_serdes(fm_eth);
 }
 
+#ifdef CONFIG_PHYLIB
 static int tgec_is_fibre(struct eth_device *dev)
 {
        struct fm_eth *fm = dev->priv;
@@ -105,6 +106,7 @@ static int tgec_is_fibre(struct eth_device *dev)
        return hwconfig_arg_cmp(phyopt, "xfi");
 }
 #endif
+#endif
 
 static u16 muram_readw(u16 *addr)
 {
@@ -483,8 +485,10 @@ static void fm_eth_halt(struct eth_device *dev)
        /* disable bmi Rx port */
        bmi_rx_port_disable(fm_eth->rx_port);
 
+#ifdef CONFIG_PHYLIB
        if (fm_eth->phydev)
                phy_shutdown(fm_eth->phydev);
+#endif
 }
 
 static int fm_eth_send(struct eth_device *dev, void *buf, int len)
@@ -658,13 +662,15 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct 
ccsr_fman *reg)
 static int init_phy(struct eth_device *dev)
 {
        struct fm_eth *fm_eth = dev->priv;
+#ifdef CONFIG_PHYLIB
        struct phy_device *phydev = NULL;
        u32 supported;
+#endif
 
-#ifdef CONFIG_PHYLIB
        if (fm_eth->type == FM_ETH_1G_E)
                dtsec_init_phy(dev);
 
+#ifdef CONFIG_PHYLIB
        if (fm_eth->bus) {
                phydev = phy_connect(fm_eth->bus, fm_eth->phyaddr, dev,
                                        fm_eth->enet_if);
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to