From: Rosy Song <rosys...@rosinson.com>
S17 ethernet support is for QCA8337N, which used on
AP152 (QCA9563) board. It is a 7 ports GbE switch.
Signed-off-by: Rosy Song <rosys...@rosinson.com>
Changes for v2-v3:
- add more commit message for s17
---
drivers/net/ag7xxx.c | 140 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 124 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c
index 403eb64895..b3b53205fa 100644
--- a/drivers/net/ag7xxx.c
+++ b/drivers/net/ag7xxx.c
@@ -3,6 +3,7 @@
* Atheros AR71xx / AR9xxx GMAC driver
*
* Copyright (C) 2016 Marek Vasut <ma...@denx.de>
+ * Copyright (C) 2019 Rosy Song <rosys...@rosinson.com>
*/
#include <common.h>
@@ -23,7 +24,8 @@ DECLARE_GLOBAL_DATA_PTR;
enum ag7xxx_model {
AG7XXX_MODEL_AG933X,
AG7XXX_MODEL_AG934X,
- AG7XXX_MODEL_AG953X
+ AG7XXX_MODEL_AG953X,
+ AG7XXX_MODEL_AG956X
};
/* MAC Configuration 1 */
@@ -219,6 +221,7 @@ static int ag7xxx_switch_reg_read(struct mii_dev *bus, int
reg, u32 *val)
u32 reg_addr;
u32 phy_temp;
u32 reg_temp;
+ u32 reg_temp_w = (reg & 0xfffffffc) >> 1;
u16 rv = 0;
int ret;
@@ -226,18 +229,25 @@ static int ag7xxx_switch_reg_read(struct mii_dev *bus,
int reg, u32 *val)
priv->model == AG7XXX_MODEL_AG953X) {
phy_addr = 0x1f;
reg_addr = 0x10;
- } else if (priv->model == AG7XXX_MODEL_AG934X) {
+ } else if (priv->model == AG7XXX_MODEL_AG934X ||
+ priv->model == AG7XXX_MODEL_AG956X) {
phy_addr = 0x18;
reg_addr = 0x00;
} else
return -EINVAL;
- ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
+ if (priv->model == AG7XXX_MODEL_AG956X) {
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, (reg >> 9) &
0x1ff);
+ } else
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
if (ret)
return ret;
phy_temp = ((reg >> 6) & 0x7) | 0x10;
- reg_temp = (reg >> 1) & 0x1e;
+ if (priv->model == AG7XXX_MODEL_AG956X)
+ reg_temp = reg_temp_w & 0x1f;
+ else
+ reg_temp = (reg >> 1) & 0x1e;
*val = 0;
ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 0, &rv);
@@ -245,7 +255,13 @@ static int ag7xxx_switch_reg_read(struct mii_dev *bus, int
reg, u32 *val)
return ret;
*val |= rv;
- ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv);
+ if (priv->model == AG7XXX_MODEL_AG956X) {
+ phy_temp = (((reg_temp_w + 1) >> 5) & 0x7) | 0x10;
+ reg_temp = (reg_temp_w + 1) & 0x1f;
+ ret = ag7xxx_switch_read(bus, phy_temp, reg_temp, &rv);
+ } else {
+ ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv);
+ }
if (ret < 0)
return ret;
*val |= (rv << 16);
@@ -260,24 +276,35 @@ static int ag7xxx_switch_reg_write(struct mii_dev *bus,
int reg, u32 val)
u32 reg_addr;
u32 phy_temp;
u32 reg_temp;
+ u32 reg_temp_w = (reg & 0xfffffffc) >> 1;
int ret;
if (priv->model == AG7XXX_MODEL_AG933X ||
priv->model == AG7XXX_MODEL_AG953X) {
phy_addr = 0x1f;
reg_addr = 0x10;
- } else if (priv->model == AG7XXX_MODEL_AG934X) {
+ } else if (priv->model == AG7XXX_MODEL_AG934X ||
+ priv->model == AG7XXX_MODEL_AG956X) {
phy_addr = 0x18;
reg_addr = 0x00;
} else
return -EINVAL;
- ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
+ if (priv->model == AG7XXX_MODEL_AG956X)
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, (reg >> 9) &
0x1ff);
+ else
+ ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9);
if (ret)
return ret;
- phy_temp = ((reg >> 6) & 0x7) | 0x10;
- reg_temp = (reg >> 1) & 0x1e;
+
+ if (priv->model == AG7XXX_MODEL_AG956X) {
+ reg_temp = (reg_temp_w + 1) & 0x1f;
+ phy_temp = (((reg_temp_w + 1) >> 5) & 0x7) | 0x10;
+ } else {
+ phy_temp = ((reg >> 6) & 0x7) | 0x10;
+ reg_temp = (reg >> 1) & 0x1e;
+ }
/*
* The switch on AR933x has some special register behavior, which
@@ -296,10 +323,18 @@ static int ag7xxx_switch_reg_write(struct mii_dev *bus,
int reg, u32 val)
if (ret < 0)
return ret;
} else {
- ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >>
16);
+ if (priv->model == AG7XXX_MODEL_AG956X) {
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp, val
>> 16);
+ } else
+ ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1,
val >> 16);
if (ret < 0)
return ret;
+ if (priv->model == AG7XXX_MODEL_AG956X) {
+ phy_temp = ((reg_temp_w >> 5) & 0x7) | 0x10;
+ reg_temp = reg_temp_w & 0x1f;
+ }
+
ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val &
0xffff);
if (ret < 0)
return ret;
@@ -626,9 +661,12 @@ static int ag7xxx_mii_setup(struct udevice *dev)
reg = 0x4;
else if (priv->model == AG7XXX_MODEL_AG953X)
reg = 0x2;
+ else if (priv->model == AG7XXX_MODEL_AG956X)
+ reg = 0x7;
if (priv->model == AG7XXX_MODEL_AG934X ||
- priv->model == AG7XXX_MODEL_AG953X) {
+ priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X) {
writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | reg,
priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
writel(reg, priv->regs + AG7XXX_ETH_MII_MGMT_CFG);
@@ -839,7 +877,8 @@ static int ag933x_phy_setup_reset_set(struct udevice *dev,
int port)
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
int ret;
- if (priv->model == AG7XXX_MODEL_AG953X) {
+ if (priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X) {
ret = ag7xxx_switch_write(priv->bus, port, MII_ADVERTISE,
ADVERTISE_ALL);
} else {
@@ -855,9 +894,15 @@ static int ag933x_phy_setup_reset_set(struct udevice *dev,
int port)
ADVERTISE_1000FULL);
if (ret)
return ret;
+ } else if (priv->model == AG7XXX_MODEL_AG956X) {
+ ret = ag7xxx_switch_write(priv->bus, port, MII_CTRL1000,
+ ADVERTISE_1000FULL);
+ if (ret)
+ return ret;
}
- if (priv->model == AG7XXX_MODEL_AG953X)
+ if (priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X)
return ag7xxx_switch_write(priv->bus, port, MII_BMCR,
BMCR_ANENABLE | BMCR_RESET);
@@ -871,7 +916,8 @@ static int ag933x_phy_setup_reset_fin(struct udevice *dev,
int port)
int ret;
u16 reg;
- if (priv->model == AG7XXX_MODEL_AG953X) {
+ if (priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X) {
do {
ret = ag7xxx_switch_read(priv->bus, port, MII_BMCR,
®);
if (ret < 0)
@@ -899,7 +945,8 @@ static int ag933x_phy_setup_common(struct udevice *dev)
if (priv->model == AG7XXX_MODEL_AG933X)
phymax = 4;
else if (priv->model == AG7XXX_MODEL_AG934X ||
- priv->model == AG7XXX_MODEL_AG953X)
+ priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X)
phymax = 5;
else
return -EINVAL;
@@ -939,7 +986,8 @@ static int ag933x_phy_setup_common(struct udevice *dev)
for (i = 0; i < phymax; i++) {
/* Read out link status */
- if (priv->model == AG7XXX_MODEL_AG953X)
+ if (priv->model == AG7XXX_MODEL_AG953X ||
+ priv->model == AG7XXX_MODEL_AG956X)
ret = ag7xxx_switch_read(priv->bus, i, MII_MIPSCR,
®);
else
ret = ag7xxx_mdio_read(priv->bus, i, 0, MII_MIPSCR);
@@ -1004,6 +1052,63 @@ static int ag934x_phy_setup(struct udevice *dev)
return 0;
}
+static int ag956x_phy_setup(struct udevice *dev)
+{
+ struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
+ int i, ret;
+ u32 reg, ctrl;
+
+ ret = ag7xxx_switch_reg_read(priv->bus, 0x0, ®);
+ if (ret)
+ return ret;
+ if ((reg & 0xffff) >= 0x1301)
+ ctrl = 0xc74164de;
+ else
+ ctrl = 0xc74164d0;
+
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x4, BIT(7));
+ if (ret)
+ return ret;
+
+ ret = ag7xxx_switch_reg_write(priv->bus, 0xe0, ctrl);
+ if (ret)
+ return ret;
+
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x624, 0x7f7f7f7f);
+ if (ret)
+ return ret;
+
+ /*
+ * Values suggested by the switch team when s17 in sgmii
+ * configuration. 0x10(S17_PWS_REG) = 0x602613a0
+ */
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x10, 0x602613a0);
+ if (ret)
+ return ret;
+
+ ret = ag7xxx_switch_reg_write(priv->bus, 0x7c, 0x0000007e);
+ if (ret)
+ return ret;
+
+ /* AR8337/AR8334 v1.0 fixup */
+ ret = ag7xxx_switch_reg_read(priv->bus, 0, ®);
+ if (ret)
+ return ret;
+ if ((reg & 0xffff) == 0x1301) {
+ for (i = 0; i < 5; i++) {
+ /* Turn on Gigabit clock */
+ ret = ag7xxx_switch_write(priv->bus, i, 0x1d, 0x3d);
+ if (ret)
+ return ret;
+ ret = ag7xxx_switch_write(priv->bus, i, 0x1e, 0x6820);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static int ag7xxx_mac_probe(struct udevice *dev)
{
struct ar7xxx_eth_priv *priv = dev_get_priv(dev);
@@ -1028,6 +1133,8 @@ static int ag7xxx_mac_probe(struct udevice *dev)
ret = ag953x_phy_setup_lan(dev);
} else if (priv->model == AG7XXX_MODEL_AG934X) {
ret = ag934x_phy_setup(dev);
+ } else if (priv->model == AG7XXX_MODEL_AG956X) {
+ ret = ag956x_phy_setup(dev);
} else {
return -EINVAL;
}
@@ -1166,6 +1273,7 @@ static const struct udevice_id ag7xxx_eth_ids[] = {
{ .compatible = "qca,ag933x-mac", .data = AG7XXX_MODEL_AG933X },
{ .compatible = "qca,ag934x-mac", .data = AG7XXX_MODEL_AG934X },
{ .compatible = "qca,ag953x-mac", .data = AG7XXX_MODEL_AG953X },
+ { .compatible = "qca,ag956x-mac", .data = AG7XXX_MODEL_AG956X },
{ }
};
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
