Hi,
On 12-03-15 04:13, Phil Han wrote:
From: Han Pengfei <pengp...@sina.com>
The Mixtile LOFT-Q is an A31 based board with 2G RAM, 8G EMMC, sdio wifi,
1Gbit ethernet, HDMI display, toslink audio plug, 4 USB2.0 port, external
USB2SATA connector, sd card plug, 3x60 external fpic expansion connector,
NXP JN5168 zigbee gw, remote support.
Also see http://focalcrest.com/en/pc.html#pro02
Signed-off-by: Han Pengfei <pengp...@sina.com>
Thanks I've queued this up in u-boot-sunxi/next for merging upstream.
Regards,
Hans
---
board/sunxi/MAINTAINERS | 5 +++++
configs/mixtile_loftq_defconfig | 16 ++++++++++++++++
2 files changed, 21 insertions(+)
create mode 100644 configs/mixtile_loftq_defconfig
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index ef3c937..90a634e 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -143,3 +143,8 @@ WEXLER-TAB7200 BOARD
M: Aleksei Mamlin <mamli...@gmail.com>
S: Maintained
F: configs/Wexler_TAB7200_defconfig
+
+MIXTILE-LOFTQ BOARD
+M: Phil Han <pengp...@sina.com>
+S: Maintained
+F: configs/mixtile_loftq_defconfig
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
new file mode 100644
index 0000000..94ebdc8
--- /dev/null
+++ b/configs/mixtile_loftq_defconfig
@@ -0,0 +1,16 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
++S:CONFIG_ARM=y
++S:CONFIG_ARCH_SUNXI=y
++S:CONFIG_MACH_SUN6I=y
++S:CONFIG_TARGET_MIXTILE_LOFTQ=y
++S:CONFIG_DRAM_CLK=312
++S:CONFIG_DRAM_ZQ=251
++S:CONFIG_MMC_SUNXI_SLOT=0
++S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# Wifi power
++S:CONFIG_AXP221_ALDO1_VOLT=3300
+# Vbus gpio for usb1
++S:CONFIG_USB1_VBUS_PIN="PH24"
+# No Vbus gpio for usb2
++S:CONFIG_USB2_VBUS_PIN=""
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot