Re: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi
Hi, On 09/29/2014 08:35 PM, jonsm...@gmail.com wrote: On Mon, Sep 29, 2014 at 2:16 PM, Karsten Merker mer...@debian.org wrote: On Mon, Sep 29, 2014 at 09:13:37AM +0300, Siarhei Siamashka wrote: How did you come to the idea to poke these bits? The linux 3.4 kernel from https://github.com/LeMaker/linux-bananapi (which is a patched linux-sunxi.org 3.4 kernel) does not show this problem, so we started looking into what is different there, and the relevant change that was found was setting these particular undocumented bits. File at issue here asking for the documentation https://github.com/allwinner-zh/documents I'm already talking to Allwinner about this, it seems that bits 10-11, or more likely 10-12 of the gmac clk register are the tx equivalent of bits 5-7, Configure GMAC receive clock delay chain. I think this is there to deal with the pcb data and clk traces not having the same length, so that this is highly board specific. I'm waiting on confirmation on this from Allwinner, as well as some info on the unit of this 0-7 value. Regards, Hans ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi
On Tue, Sep 30, 2014 at 8:02 AM, Hans de Goede hdego...@redhat.com wrote: Hi, On 09/29/2014 08:35 PM, jonsm...@gmail.com wrote: On Mon, Sep 29, 2014 at 2:16 PM, Karsten Merker mer...@debian.org wrote: On Mon, Sep 29, 2014 at 09:13:37AM +0300, Siarhei Siamashka wrote: How did you come to the idea to poke these bits? The linux 3.4 kernel from https://github.com/LeMaker/linux-bananapi (which is a patched linux-sunxi.org 3.4 kernel) does not show this problem, so we started looking into what is different there, and the relevant change that was found was setting these particular undocumented bits. File at issue here asking for the documentation https://github.com/allwinner-zh/documents I'm already talking to Allwinner about this, it seems that bits 10-11, or more likely 10-12 of the gmac clk register are the tx equivalent of bits 5-7, Configure GMAC receive clock delay chain. I think this is there to deal with the pcb data and clk traces not having the same length, so that this is highly board specific. I'm waiting on confirmation on this from Allwinner, as well as some info on the unit of this 0-7 value. Encourage them to update the manual and push a new copy to git hub immediately. Too much info like this is getting buried in mail archives. Electronic publishing is free - update as often as you want. The more they fix stuff like this in the manual, the fewer questions they will need to deal with in person. When it goes into the manual it won't get lost. Regards, Hans -- Jon Smirl jonsm...@gmail.com ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi
On Mon, Sep 29, 2014 at 2:16 PM, Karsten Merker mer...@debian.org wrote: On Mon, Sep 29, 2014 at 09:13:37AM +0300, Siarhei Siamashka wrote: On Sun, 28 Sep 2014 20:13:21 +0200 Hans de Goede hdego...@redhat.com wrote: In order for the gmac nic to work reliable on the Bananapi, we need to poke these 2 undocumented bits in the gmac clk register. Since these are undocumented, this commit only sets these bits on the Bananapi for now. I'll contact Allwinner to try and get these bits documented, once they are documented we can hopefully replace this hack with a better patch. Could you please provide a bit more details in the commit message? What are the symptoms of the problem? Without the patch, u-boot on the BananaPi shows massive packet loss on every network activity. The packet loss is so extreme that it is actually impossible to boot a kernel by tftp because u-boot gives up. The mainline kernel has (once booted) shown similar problems on the BananaPi. How did you come to the idea to poke these bits? The linux 3.4 kernel from https://github.com/LeMaker/linux-bananapi (which is a patched linux-sunxi.org 3.4 kernel) does not show this problem, so we started looking into what is different there, and the relevant change that was found was setting these particular undocumented bits. File at issue here asking for the documentation https://github.com/allwinner-zh/documents Does the GMAC driver in the linux kernel need a similar fix/workaround? Not as far as I can see - once u-boot has set these two bits during system initialization, the mainline kernel works fine without any changes. Also as mentioned in another e-mail http://lists.denx.de/pipermail/u-boot/2014-September/190096.html u-boot configures the 912MHz @1.4V CPU clock frequency/voltage setup for sun7i hardware. And according to the information from Tony Zhang, this is supposed to be unreliable for the Banana Pi. So what happens to this GMAC bug if you just increase the dcdc2 voltage in u-boot (or reduce the CPU clock frequency)? I can test that if you could tell me what would have to be changed in u-boot to do that. Regards, Karsten -- Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der Werbung sowie der Markt- oder Meinungsforschung. -- You received this message because you are subscribed to the Google Groups linux-sunxi group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- Jon Smirl jonsm...@gmail.com ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi
On Mon, 29 Sep 2014 20:16:35 +0200 Karsten Merker mer...@debian.org wrote: On Mon, Sep 29, 2014 at 09:13:37AM +0300, Siarhei Siamashka wrote: On Sun, 28 Sep 2014 20:13:21 +0200 Hans de Goede hdego...@redhat.com wrote: In order for the gmac nic to work reliable on the Bananapi, we need to poke these 2 undocumented bits in the gmac clk register. Since these are undocumented, this commit only sets these bits on the Bananapi for now. I'll contact Allwinner to try and get these bits documented, once they are documented we can hopefully replace this hack with a better patch. Could you please provide a bit more details in the commit message? What are the symptoms of the problem? Without the patch, u-boot on the BananaPi shows massive packet loss on every network activity. The packet loss is so extreme that it is actually impossible to boot a kernel by tftp because u-boot gives up. The mainline kernel has (once booted) shown similar problems on the BananaPi. How did you come to the idea to poke these bits? The linux 3.4 kernel from https://github.com/LeMaker/linux-bananapi (which is a patched linux-sunxi.org 3.4 kernel) does not show this problem, so we started looking into what is different there, and the relevant change that was found was setting these particular undocumented bits. Thanks for the detailed explanations. They would look really great in the commit message. Does the GMAC driver in the linux kernel need a similar fix/workaround? Not as far as I can see - once u-boot has set these two bits during system initialization, the mainline kernel works fine without any changes. OK. I just wonder if it is a good idea for the kernel to rely on these bits being set appropriately by the bootloader. Not that it has anything to do with u-boot. Also as mentioned in another e-mail http://lists.denx.de/pipermail/u-boot/2014-September/190096.html u-boot configures the 912MHz @1.4V CPU clock frequency/voltage setup for sun7i hardware. And according to the information from Tony Zhang, this is supposed to be unreliable for the Banana Pi. So what happens to this GMAC bug if you just increase the dcdc2 voltage in u-boot (or reduce the CPU clock frequency)? I can test that if you could tell me what would have to be changed in u-boot to do that. The dcdc2 voltage is set here (under the CONFIG_AXP209_POWER ifdef): http://git.denx.de/?p=u-boot.git;a=blob;f=board/sunxi/board.c;h=2179e234e21d67b0fec064de792fca175db90ca5;hb=be9f643ae6aa9044c60fe80e3a2c10be8371c692#l140 Right now it is set to 1400, which means 1.4V (and the voltage can be changed in 0.025V steps). The CPU clock frequency for sun7i is set here: http://git.denx.de/?p=u-boot.git;a=blob;f=include/configs/sun7i.h;h=a902b845744707e64fb5a064c6039bc93b0150d9;hb=be9f643ae6aa9044c60fe80e3a2c10be8371c692#l16 Right now it is set to 912MHz This CPU clock frequency/voltage pair is then just used unmodified by the mainline kernel (until we get proper cpufreq support later). So it makes a lot of sense to be sure that it is sufficiently reliable on every Allwinner A20 device. You can try to increase the dcdc2 voltage or reduce the CPU clock frequency and check if the Banana Pi reliability problems disappear. By the way, the dcdc2 voltage is already set to the maximum, which is specified in the datasheet. You can have a look at VDD-CPU limits in https://github.com/allwinner-zh/documents/blob/master/A20/A20%20Datasheet%20V1.4%2020131230.pdf And VDD-CPU is provided from dcdc2, as can be seen, for example, in the A20-OLINUXINO-MICRO schematics (the Banana Pi does not seem to have its schematics document in public access, but all A20 devices have it designed in the same way): https://github.com/OLIMEX/OLINUXINO/blob/master/HARDWARE/A10-OLinuXino-MICRO/A20-OLINUXINO-MICRO_4GB_Rev_F1.pdf -- Best regards, Siarhei Siamashka ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] [linux-sunxi] Re: [PATCH] sunxi: Fix gmac not working reliable on the Bananapi
On Sun, 28 Sep 2014, Karsten Merker wrote:
On Sun, Sep 28, 2014 at 08:13:21PM +0200, Hans de Goede wrote:
In order for the gmac nic to work reliable on the Bananapi, we need to poke
these 2 undocumented bits in the gmac clk register. Since these are
undocumented, this commit only sets these bits on the Bananapi for now.
I'll contact Allwinner to try and get these bits documented, once they
are documented we can hopefully replace this hack with a better patch.
Reported-by: Karsten Merker mer...@debian.org
Signed-off-by: Hans de Goede hdego...@redhat.com
Tested-by: Karsten Merker mer...@debian.org
Tested-by: Zoltan HERPAI wigy...@openwrt.org
---
board/sunxi/gmac.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c
index e7ff952..f58c963 100644
--- a/board/sunxi/gmac.c
+++ b/board/sunxi/gmac.c
@@ -24,6 +24,15 @@ int sunxi_gmac_initialize(bd_t *bis)
CCM_GMAC_CTRL_GPIT_MII);
#endif
+ /*
+* HdG: this is necessary to get GMAC to work reliable on the
+* Bananapi. We don't know what these undocumented bits do, so this
+* is a Bananapi specific hack for now.
+*/
+#ifdef CONFIG_BANANAPI
+ setbits_le32(ccm-gmac_clk_cfg, 0x3 10);
+#endif
+
/* Configure pin mux settings for GMAC */
for (pin = SUNXI_GPA(0); pin = SUNXI_GPA(16); pin++) {
#ifdef CONFIG_RGMII
--
2.1.0
Regards,
Karsten
--
Gem. Par. 28 Abs. 4 Bundesdatenschutzgesetz widerspreche ich der Nutzung
sowie der Weitergabe meiner personenbezogenen Daten für Zwecke der
Werbung sowie der Markt- oder Meinungsforschung.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
