michael <[EMAIL PROTECTED]> schrieb am 07.10.2008 12:14:48: > Hi, > > [EMAIL PROTECTED] wrote: > > Hi, > > > > on the matter of getting u-boot work with the ADI Sidewinder Reference
> > Platform, I found the previously posted patches and used them as starting > > point for my own patch set. > > The Sidewinder board works with this patch, including ECC (optional). > > > > There is a minimum set of ifdefs in cpu/ixp/start.S and no board-specific > > low-level.S and thus no endless code-duplication. The > > SDRAM parameters are handled by configuration definitions. > > The ixp425.h and ixp465.h header files should be merged but that can > > follow in a different patch, possibly renaming the defines and fixing all > > board specific code. > > > I think that you use my patchset. It is true? Almost. I used it as base but modified it quite a bit. There is almost no difference between IXP465 and IXP425 anymore (except header files), no lowlevel-init.S anymore and correct CPU info display. BTW: ixdp425_config, ixdpg425_config and pdnb3_config are broken if IxNpeMicrocode.o is not present HS _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot