Re: [U-Boot] Ethernet i210 (e1000 driver) on tegra K1
Hi Stephen By accident I stumbled over this post and by incident now that we at Toradex are working on an Apalis TK1 module design using the same i210/i211 gigabit Ethernet chip as already widely deployed on Apalis T30 we are facing this as well. On Mon, 2015-11-09 at 10:21 -0700, Stephen Warren wrote: > On 11/04/2015 08:49 PM, Bin Meng wrote: > > On Thu, Nov 5, 2015 at 2:54 AM, Stephen Warren> rg> wrote: > > > On 10/30/2015 05:07 AM, Ivan Mercier wrote: > > > > > > > > Hi, > > > > > > > > I'm using a ethernet controller intel i210 > > > > (http://www.commell.com.tw/product/Surveillance/MPX-210.htm) on > > > > my > > > > nvidia tegra k1 jetson. > > > > > > > > > (You didn't actually CC anyone involved with Tegra, so I only > > > accidentally > > > noticed this while I was looking at my mailing list folder) Exactly. Looking through the e1000 git log one should also have seen that me and others actually worked on it and that we are indeed successfully using it on Tegra albeit T30 only so far. > > > > I not an expert with pci, but the only way to make it working > > > > in u-boot > > > > (upstream) is with the workaround below. > > > > > > > > E1000 is very common, so finding a critical bug in this driver > > > > seems > > > > weird... > > > > Do you think there is a bug in e1000.c or in tegra pci layer? > > > > > > > > > > diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c > > > > > > > > > > @@ -5186,7 +5186,7 @@ static int _e1000_transmit(struct > > > > e1000_hw *hw, > > > > void *txpacket, int length) > > > > txp = tx_base + tx_tail; > > > > tx_tail = (tx_tail + 1) % 8; > > > > > > > > -txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, > > > > nv_packet)); > > > > +txp->buffer_addr = cpu_to_le64((unsigned long) nv_packet); > > > > txp->lower.data = cpu_to_le32(hw->txd_cmd | length); > > > > txp->upper.data = 0; > > > > > > > > > In order to work out what's going on, perhaps you could print out > > > the values > > > of nv_packet and virt_to_bus(hw->pdev, nv_packet). I did exactly that which gives: Loading: nv_packet = 0xfffecb00 pci_hose_phys_to_bus: invalid physical address virt_to_bus(hw->pdev, nv_packet) = 0x So that looks OK but does not yet give us much further clues. Looking at where the actual translation happens in drivers/pci/pci_common.c: int __pci_hose_phys_to_bus(struct pci_controller *hose, ... if (bus_addr >= res->bus_start && bus_addr < res->bus_start + res->size) { *ba = bus_addr; ... So I added some more prints there giving: bus_addr = 0xfffecb00 phys_addr = 0xfffecb00 res->phys_start = 0x8000 res->bus_start = 0x8000 res->size = 0x8000 Ah, OK. That makes sense now. Just a classical overflow happening in the address range check (e.g. 0x8000 + 0x8000 giving 0x0 in 32- bits). Strange that this works for others but e.g. the Realtek driver seems to do the inverse conversion: int __pci_hose_bus_to_phys(struct pci_controller *hose, ... if (bus_addr >= res->bus_start && (bus_addr - res->bus_start) < res->size) { *pa = (bus_addr - res->bus_start + res- >phys_start); Ah, they worked around it by changing the order of the addition vs. subtraction in the range check. That will work. I will be sending out a proper patch to fix this shortly. But why does it work on T30? bus_addr = 0xffee92e0 phys_addr = 0xffee92e0 res->phys_start = 0x8000 res->bus_start = 0x8000 res->size = 0x7ff0 Ah funny, ooks like we got lucky due to the size being slightly below 0x8000 (;-p). > > > It's not terribly surprising that removing the call to > > > virt_to_bus works, > > > since IIRC U-Boot on Tegra uses the same address setup for the > > > PCIe bus as > > > for CPU physical addresses as for CPU virtual addresses. > > > > > > So, the question is: what is virt_to_bus() doing, and is it the > > > right API to > > > call? > > > > virt_to_bus() is to translate cpu virtual address to pci bus > > physical > > address. Basically two levels of translation. > > > > > I see that virt_to_bus() is defined as: > > > > > > e1000.c: > > > > > > #define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) > > > (v)) > > > > > > pci.h: > > > > > > #define pci_virt_to_mem(dev, addr) \ > > > pci_virt_to_bus((dev), (addr), PCI_REGION_MEM) > > > > > > #define pci_virt_to_bus(dev, addr, flags) \ > > > pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \ > > > (virt_to_phys(addr)), (flags)) > > > > > > I know that the RTL8169 driver works on the same board (it's > > > soldered down > > > and attached to the other PCIe root port on the SoC). For what > > > looks like > > > the same "use case", it seems to call pci_mem_to_phys() which is: > > > > > > pci.h: > > > > > > #define pci_mem_to_phys(dev, addr) \ > > >
Re: [U-Boot] Ethernet i210 (e1000 driver) on tegra K1
On 11/04/2015 08:49 PM, Bin Meng wrote: On Thu, Nov 5, 2015 at 2:54 AM, Stephen Warrenwrote: On 10/30/2015 05:07 AM, Ivan Mercier wrote: Hi, I'm using a ethernet controller intel i210 (http://www.commell.com.tw/product/Surveillance/MPX-210.htm) on my nvidia tegra k1 jetson. (You didn't actually CC anyone involved with Tegra, so I only accidentally noticed this while I was looking at my mailing list folder) I not an expert with pci, but the only way to make it working in u-boot (upstream) is with the workaround below. E1000 is very common, so finding a critical bug in this driver seems weird... Do you think there is a bug in e1000.c or in tegra pci layer? diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c @@ -5186,7 +5186,7 @@ static int _e1000_transmit(struct e1000_hw *hw, void *txpacket, int length) txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; -txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); +txp->buffer_addr = cpu_to_le64((unsigned long) nv_packet); txp->lower.data = cpu_to_le32(hw->txd_cmd | length); txp->upper.data = 0; In order to work out what's going on, perhaps you could print out the values of nv_packet and virt_to_bus(hw->pdev, nv_packet). It's not terribly surprising that removing the call to virt_to_bus works, since IIRC U-Boot on Tegra uses the same address setup for the PCIe bus as for CPU physical addresses as for CPU virtual addresses. So, the question is: what is virt_to_bus() doing, and is it the right API to call? virt_to_bus() is to translate cpu virtual address to pci bus physical address. Basically two levels of translation. I see that virt_to_bus() is defined as: e1000.c: #define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) pci.h: #define pci_virt_to_mem(dev, addr) \ pci_virt_to_bus((dev), (addr), PCI_REGION_MEM) #define pci_virt_to_bus(dev, addr, flags) \ pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \ (virt_to_phys(addr)), (flags)) I know that the RTL8169 driver works on the same board (it's soldered down and attached to the other PCIe root port on the SoC). For what looks like the same "use case", it seems to call pci_mem_to_phys() which is: pci.h: #define pci_mem_to_phys(dev, addr) \ pci_bus_to_phys((dev), (addr), PCI_REGION_MEM) #define pci_bus_to_phys(dev, addr, flags) \ pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), \ (flags)) That's odd, since one of those does a phys -> bus translation and the other does a bus -> phys translation. That's the opposite direction, so both can't possibly be right. I wonder if those mapping functions are no-ops on Indeed these address translation macros in pci.h are confusing. But most SoC defines 1:1:1 mapping so these are not needed. The reason why it fails on Tegra is probably due to the addresses are not 1:1:1 mapped? I'm pretty sure everything is 1:1. That's why removing the call to any translation macro made the e1000 driver work for Ivan. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Ethernet i210 (e1000 driver) on tegra K1
On Thu, Nov 5, 2015 at 2:54 AM, Stephen Warrenwrote: > On 10/30/2015 05:07 AM, Ivan Mercier wrote: >> >> Hi, >> >> I'm using a ethernet controller intel i210 >> (http://www.commell.com.tw/product/Surveillance/MPX-210.htm) on my >> nvidia tegra k1 jetson. > > > (You didn't actually CC anyone involved with Tegra, so I only accidentally > noticed this while I was looking at my mailing list folder) > >> I not an expert with pci, but the only way to make it working in u-boot >> (upstream) is with the workaround below. >> >> E1000 is very common, so finding a critical bug in this driver seems >> weird... >> Do you think there is a bug in e1000.c or in tegra pci layer? > > >> diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c > > >> @@ -5186,7 +5186,7 @@ static int _e1000_transmit(struct e1000_hw *hw, >> void *txpacket, int length) >> txp = tx_base + tx_tail; >> tx_tail = (tx_tail + 1) % 8; >> >> -txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); >> +txp->buffer_addr = cpu_to_le64((unsigned long) nv_packet); >> txp->lower.data = cpu_to_le32(hw->txd_cmd | length); >> txp->upper.data = 0; > > > In order to work out what's going on, perhaps you could print out the values > of nv_packet and virt_to_bus(hw->pdev, nv_packet). > > It's not terribly surprising that removing the call to virt_to_bus works, > since IIRC U-Boot on Tegra uses the same address setup for the PCIe bus as > for CPU physical addresses as for CPU virtual addresses. > > So, the question is: what is virt_to_bus() doing, and is it the right API to > call? virt_to_bus() is to translate cpu virtual address to pci bus physical address. Basically two levels of translation. > > I see that virt_to_bus() is defined as: > > e1000.c: > > #define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) > > pci.h: > > #define pci_virt_to_mem(dev, addr) \ > pci_virt_to_bus((dev), (addr), PCI_REGION_MEM) > > #define pci_virt_to_bus(dev, addr, flags) \ > pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \ > (virt_to_phys(addr)), (flags)) > > I know that the RTL8169 driver works on the same board (it's soldered down > and attached to the other PCIe root port on the SoC). For what looks like > the same "use case", it seems to call pci_mem_to_phys() which is: > > pci.h: > > #define pci_mem_to_phys(dev, addr) \ > pci_bus_to_phys((dev), (addr), PCI_REGION_MEM) > > #define pci_bus_to_phys(dev, addr, flags) \ > pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), \ > (flags)) > > That's odd, since one of those does a phys -> bus translation and the other > does a bus -> phys translation. That's the opposite direction, so both can't > possibly be right. I wonder if those mapping functions are no-ops on Indeed these address translation macros in pci.h are confusing. But most SoC defines 1:1:1 mapping so these are not needed. The reason why it fails on Tegra is probably due to the addresses are not 1:1:1 mapped? > whatever architectures the e1000 driver has been used on (and hence have > caused no issues), but fail for some reason on ARM? > > (The other difference is the call to virt_to_phys(), but that's a no-op on > ARM as far as I can tell). Regards, Bin ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Ethernet i210 (e1000 driver) on tegra K1
On 10/30/2015 05:07 AM, Ivan Mercier wrote: Hi, I'm using a ethernet controller intel i210 (http://www.commell.com.tw/product/Surveillance/MPX-210.htm) on my nvidia tegra k1 jetson. (You didn't actually CC anyone involved with Tegra, so I only accidentally noticed this while I was looking at my mailing list folder) I not an expert with pci, but the only way to make it working in u-boot (upstream) is with the workaround below. E1000 is very common, so finding a critical bug in this driver seems weird... Do you think there is a bug in e1000.c or in tegra pci layer? diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c @@ -5186,7 +5186,7 @@ static int _e1000_transmit(struct e1000_hw *hw, void *txpacket, int length) txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; -txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); +txp->buffer_addr = cpu_to_le64((unsigned long) nv_packet); txp->lower.data = cpu_to_le32(hw->txd_cmd | length); txp->upper.data = 0; In order to work out what's going on, perhaps you could print out the values of nv_packet and virt_to_bus(hw->pdev, nv_packet). It's not terribly surprising that removing the call to virt_to_bus works, since IIRC U-Boot on Tegra uses the same address setup for the PCIe bus as for CPU physical addresses as for CPU virtual addresses. So, the question is: what is virt_to_bus() doing, and is it the right API to call? I see that virt_to_bus() is defined as: e1000.c: #define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v)) pci.h: #define pci_virt_to_mem(dev, addr) \ pci_virt_to_bus((dev), (addr), PCI_REGION_MEM) #define pci_virt_to_bus(dev, addr, flags) \ pci_hose_phys_to_bus(pci_bus_to_hose(PCI_BUS(dev)), \ (virt_to_phys(addr)), (flags)) I know that the RTL8169 driver works on the same board (it's soldered down and attached to the other PCIe root port on the SoC). For what looks like the same "use case", it seems to call pci_mem_to_phys() which is: pci.h: #define pci_mem_to_phys(dev, addr) \ pci_bus_to_phys((dev), (addr), PCI_REGION_MEM) #define pci_bus_to_phys(dev, addr, flags) \ pci_hose_bus_to_phys(pci_bus_to_hose(PCI_BUS(dev)), (addr), \ (flags)) That's odd, since one of those does a phys -> bus translation and the other does a bus -> phys translation. That's the opposite direction, so both can't possibly be right. I wonder if those mapping functions are no-ops on whatever architectures the e1000 driver has been used on (and hence have caused no issues), but fail for some reason on ARM? (The other difference is the call to virt_to_phys(), but that's a no-op on ARM as far as I can tell). ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Ethernet i210 (e1000 driver) on tegra K1
Hi, I'm using a ethernet controller intel i210 (http://www.commell.com.tw/product/Surveillance/MPX-210.htm) on my nvidia tegra k1 jetson. I not an expert with pci, but the only way to make it working in u-boot (upstream) is with the workaround below. E1000 is very common, so finding a critical bug in this driver seems weird... Do you think there is a bug in e1000.c or in tegra pci layer? diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 2ba03ed..206884d 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -5186,7 +5186,7 @@ static int _e1000_transmit(struct e1000_hw *hw, void *txpacket, int length) txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; -txp->buffer_addr = cpu_to_le64(virt_to_bus(hw->pdev, nv_packet)); +txp->buffer_addr = cpu_to_le64((unsigned long) nv_packet); txp->lower.data = cpu_to_le32(hw->txd_cmd | length); txp->upper.data = 0; thank you -- Best regards / Bien cordialement Ivan Mercier ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot