Re: [U-Boot] Query on the ci_udc driver for USB client implementation
Hi Sanchayan, On Tuesday 04 November 2014 09:58 PM, Lukasz Majewski wrote: Hi Sanchayan, On Tuesday 04 November 2014 10:25 AM, Marek Vasut wrote: On Monday, November 03, 2014 at 04:46:48 PM, Fabio Estevam wrote: On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ). An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands. Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel. I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU? Hello, I have a memory alignment problem with DFU as of now. mtdparts is as below device nand0 fsl_nfc, # parts = 4 #: namesizeoffset mask_flags 0: vf-bcb 0x0002 0x 1 1: u-boot 0x0016 0x0002 1 2: u-boot-env 0x0008 0x0018 0 3: ubi 0x3fe0 0x0020 0 active partition: nand0,0 - (vf-bcb) 0x0002 @ 0x defaults: mtdids : nand0=fsl_nfc mtdparts: mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),-(ubi) As per the above, setenv dfu_alt_info vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4 and CONFIG_SYS_CACHELINE_SIZE is 32. I have a ubifs image and i was trying to write it by running dfu 0 nand 4 in u-boot and sudo dfu-util -D ubifs.img -a ubi on the host. I got the error as below. dfu_get_buf: Could not memalign 0x80 bytes Setting CONFIG_SYS_DFU_DATA_BUF_SIZE to (1024*1024) resolved this. After this, trying an update as above, did not give me an updated ubi (which i check by booting to user space) and doing a nand erase.part on ubi partition and then repeating the procedure results in Bad Linux ARM zImage magic!. After looking a bit online, at the below two links http://lists.denx.de/pipermail/u-boot/2013-May/155089.html http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs I started trying ubinize. Getting the memory alignment issues again now :). I have tried 1, 2, 4 and 8Mb for the dfu data buffer size. So i am trying to figure this out at the moment. I am probably missing something. :) On our boards we have eMMC memory, so I'm not so familiar with NAND DFU problems. However, I would advise you to pose this question to any of AM335x boards maintainer (e.g. Tom Rini) since they use NAND on their boards. --Best Regards, Sanchayan. Thanks again for your inputs. Cheers! Best Regards, Sanchayan. Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. There isn't any, so ask away ;-) Hope i am asking the right questions. [...] Best regards, Marek Vasut -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
On Tuesday 04 November 2014 09:58 PM, Lukasz Majewski wrote: Hi Sanchayan, On Tuesday 04 November 2014 10:25 AM, Marek Vasut wrote: On Monday, November 03, 2014 at 04:46:48 PM, Fabio Estevam wrote: On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ). An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands. Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel. I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU? Hello, I have a memory alignment problem with DFU as of now. mtdparts is as below device nand0 fsl_nfc, # parts = 4 #: namesizeoffset mask_flags 0: vf-bcb 0x0002 0x 1 1: u-boot 0x0016 0x0002 1 2: u-boot-env 0x0008 0x0018 0 3: ubi 0x3fe0 0x0020 0 active partition: nand0,0 - (vf-bcb) 0x0002 @ 0x defaults: mtdids : nand0=fsl_nfc mtdparts: mtdparts=fsl_nfc:128k(vf-bcb)ro,1408k(u-boot)ro,512k(u-boot-env),-(ubi) As per the above, setenv dfu_alt_info vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4 and CONFIG_SYS_CACHELINE_SIZE is 32. I have a ubifs image and i was trying to write it by running dfu 0 nand 4 in u-boot and sudo dfu-util -D ubifs.img -a ubi on the host. I got the error as below. dfu_get_buf: Could not memalign 0x80 bytes Setting CONFIG_SYS_DFU_DATA_BUF_SIZE to (1024*1024) resolved this. After this, trying an update as above, did not give me an updated ubi (which i check by booting to user space) and doing a nand erase.part on ubi partition and then repeating the procedure results in Bad Linux ARM zImage magic!. After looking a bit online, at the below two links http://lists.denx.de/pipermail/u-boot/2013-May/155089.html http://www.linux-mtd.infradead.org/faq/ubifs.html#L_mkfubifs I started trying ubinize. Getting the memory alignment issues again now :). I have tried 1, 2, 4 and 8Mb for the dfu data buffer size. So i am trying to figure this out at the moment. I am probably missing something. :) --Best Regards, Sanchayan. Thanks again for your inputs. Cheers! Best Regards, Sanchayan. Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. There isn't any, so ask away ;-) Hope i am asking the right questions. [...] Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
Hi Sanchayan, On Tuesday 04 November 2014 10:25 AM, Marek Vasut wrote: On Monday, November 03, 2014 at 04:46:48 PM, Fabio Estevam wrote: On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ). An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands. Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel. I'm very happy that UMS is working seamlessly. What kind of trouble do you have with DFU? Thanks again for your inputs. Cheers! Best Regards, Sanchayan. Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. There isn't any, so ask away ;-) Hope i am asking the right questions. [...] Best regards, Marek Vasut -- Best regards, Lukasz Majewski Samsung RD Institute Poland (SRPOL) | Linux Platform Group ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
On Tuesday 04 November 2014 10:25 AM, Marek Vasut wrote: On Monday, November 03, 2014 at 04:46:48 PM, Fabio Estevam wrote: On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ). An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands. Thank you Marek. I had enabled usb ether options already and was trying to test USB client functionality with RNDIS. For some reason it was not working and i was not able to trace the issue and subsequently was not sure about the client part. Your inputs cleared my doubts. I tried UMS and DFU. UMS is working just fine and i can download the respective images through DFU. Though this DFU is not working full proof, but, i can figure that out now i feel. Thanks again for your inputs. Cheers! Best Regards, Sanchayan. Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. There isn't any, so ask away ;-) Hope i am asking the right questions. [...] Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
Hello, Any pointers? Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. Hope i am asking the right questions. Thanks Regards, Sanchayan Maity. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. Hope i am asking the right questions. Thanks Regards, Sanchayan Maity. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Query on the ci_udc driver for USB client implementation
On Monday, November 03, 2014 at 04:46:48 PM, Fabio Estevam wrote: On Mon, Nov 3, 2014 at 3:33 AM, Sanchayan Maity maitysancha...@gmail.com wrote: Hello, Any pointers? Adding Marek and Stefan on Cc in case they can provide some help. Regards, Fabio Estevam Thanks Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? See include/configs/sansa_fuze_plus.h , you need the gadget driver for the function you want to implement , in this case it's ethernet for example (selected via CONFIG_USB_ETH_CDC ). An example of DFU/UMS can be found in include/configs/exynos4-common.h and to activate those, you need to use the 'dfu' or 'ums' commands. Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. There isn't any, so ask away ;-) Hope i am asking the right questions. [...] Best regards, Marek Vasut ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] Query on the ci_udc driver for USB client implementation
Hello, I am currently implementing USB Host and client support for Freescale Vybrid platform in u-boot. I managed to get the host implementation working. For the host side, usb start calls usb_init(), which in turns call, usb_lowlevel_init(), from there into the ehic_hcd_init() of my implementation. So, setting up the necessary clocks and plls for USB in my implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor structures was all. The flow and setup required i was able to trace. The USB client part is not clear to me. I was thinking i can use the ci_udc driver somehow to implement the client part. How can i use the ci_udc driver to implement client functionality?. From what i could see, the usb_gadget_driver_register() is suppose to be the first call. But, i couldn't trace from where this gets called or the flow and setup is suppose to be. OR Is a separate client driver required and nothing generic can be used akin to how it could be done for host? Sorry if i am asking this question in the wrong place. I couldn't find anyone in the u-boot IRC channel nor find something similar to the kernel-newbies mailing list. Hope i am asking the right questions. Thanks Regards, Sanchayan Maity. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
