Hi Friends,
I have successfully run u-boot our my custom board but I can't run kernel.
Problem is that I have saved uImage.bin at NOR location 0x80 and load into
DRAM:0x4100. Here u-boot can get kernel info and print into UART consol but
after loading uncompressed image from 0x4100 to 0x4002 u-boot transfer
its control to linux kernel and here my hardware goes reset means can't run
kernel at 0x4002.
Following is the log of consol:
U-Boot 2011.09 (Jan 23 2013 - 17:16:07)
CPU: BTAM MCF5329 (Mask:54 Version:2)
CPU CLK 240 MHz BUS CLK 80 MHz
Board: BTAM 5329
I2C: ready
DRAM: 32 MiB
Flash: 16 MiB
In:serial
Out: serial
Err: serial
Net: Link UP timeout
FEC0
Hit any key to stop autoboot: 5 4 3 2 1 0
## Booting kernel from Legacy Image at 4100 ...
Image Name:
Created: 2013-03-04 12:03:52 UTC
Image Type: M68K Linux Kernel Image (gzip compressed)
Data Size:1549021 Bytes = 1.5 MiB
Load Address: 4002
Entry Point: 4002
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
U-Boot 2011.09 (Jan 23 2013 - 17:16:07)
CPU: BTAM MCF5329 (Mask:54 Version:2)
CPU CLK 240 MHz BUS CLK 80 MHz
Board: BTAM 5329
I2C: ready
DRAM: 32 MiB
Flash: 16 MiB
In:serial
Out: serial
Err: serial
Net: Link UP timeout
FEC0
Hit any key to stop autoboot: 5 4 3 2 1 0
## Booting kernel from Legacy Image at 4100 ...
Image Name:
Created: 2013-03-04 12:03:52 UTC
Image Type: M68K Linux Kernel Image (gzip compressed)
Data Size:1549021 Bytes = 1.5 MiB
Load Address: 4002
Entry Point: 4002
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
U-Boot 2011.09 (Jan 23 2013 - 17:16:07)
CPU: BTAM MCF5329 (Mask:54 Version:2)
CPU CLK 240 MHz BUS CLK 80 MHz
Thanks Regards,
Ramesh
~~Disclaimer~~~
Information contained and transmitted by this e-mail is confidential and
proprietary to iGATE and its affiliates and is intended for use only by the
recipient. If you are not the intended recipient, you are hereby notified that
any dissemination, distribution, copying or use of this e-mail is strictly
prohibited and you are requested to delete this e-mail immediately and notify
the originator or mailad...@igate.com mailto:mailad...@igate.com. iGATE does
not enter into any agreement with any party by e-mail. Any views expressed by
an individual do not necessarily reflect the view of iGATE. iGATE is not
responsible for the consequences of any actions taken on the basis of
information provided, through this email. The contents of an attachment to this
e-mail may contain software viruses, which could damage your own computer
system. While iGATE has taken every reasonable precaution to minimise this
risk, we cannot accept liability for any damage which you sustain as a result
of software viruses. You should carry out your own virus checks before opening
an attachment. To know more about iGATE please visit www.igate.com
http://www.igate.com.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
