Re: [U-Boot] S5PV210 boot problem

[smart]

Any suggestions? Should I provide more information?


On ۱۶/۱۰/۰۱ 02:55, nader last wrote:

Good day,

I have a custom HW around an s5pv210 soc. It's based on mini210 board 
and uses u-boot v1.3.4 as its bootloader. I want to use a newer 
version of u-boot to boot my HW.
AFAIK in recent version of u-boot (e.g. v2016.09) GONI board is the 
only supported HW which is based on s5pv210 too. I can successfully 
compile the source with this configuration and burn it on an SD card. 
But when I try to boot the HW, it complains about the checksum with 
"SD checksum error" message. The script used to burn u-boot on the SD 
card, calculates the checksum for the first 8192 bytes of u-boot.bin 
and adds it somewhere which used to be working when the u-boot version 
was v1.3.4.

Any help would greatly be appreciated.

Thank you for your time.

Nasser


___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] S5PV210 boot problem

[nader last]

Good day,
I have a custom HW around an s5pv210 soc. It's based on mini210 board and uses 
u-boot v1.3.4 as its bootloader. I want to use a newer version of u-boot to 
boot my HW. AFAIK in recent version of u-boot (e.g. v2016.09) GONI board is the 
only supported HW which is based on s5pv210 too. I can successfully compile the 
source with this configuration and burn it on an SD card. But when I try to 
boot the HW, it complains about the checksum with "SD checksum error" message. 
The script used to burn u-boot on the SD card, calculates the checksum for the 
first 8192 bytes of u-boot.bin and adds it somewhere which used to be working 
when the u-boot version was v1.3.4.Any help would greatly be appreciated.
Thank you for your time.
Nasser
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot