Re: [PATCHv4 0/9] Introduce B1x5v2 support
Hi Sebastian,
On 02.11.20 09:07, Stefano Babic wrote:
Hi Sebastian,
I integrated the patches but the MAINTAINERS file for B1x5v2 is missing.
Can you send a follow-up patch to fix this ? (Or just a V5 for 9/9, your
choice).
Just send a follow-up patch, thanks.
Regards,
Stefano
Regards,
Stefano
On 02.09.20 19:31, Sebastian Reichel wrote:
This series introduces support for a new i.MX6DL based GE patient
monitor series.
Patch 1: Add support for storing bootcount in SPI-flash
Patch 2+3: Improve M41T62 RTC driver's reset routine.
PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL
Patch 5: Add poweroff-gpio support
Patch 6-8: restructure common GE code
Patch 9: Add the actual board, using SPL and DM
Changes since PATCHv3 [0]:
* Dropped patch for reading DR for i.MX GPIOs and set
SION pinmux bits in B1x5v2 output GPIOs instead
* Rebased to v2020.10-rc3
Changes since PATCHv2:
* PATCH 10: Fixed network phy mode ("rgmii" -> "rgmii-id")
* PATCH 6: Fixed nits reported by Simon Glass and added is
Reviewed-by Tag.
Changes since PATCHv1:
* Rebased to v2020.10-rc2
* Original patch 1 (support for DM_SPI_FLASH with non-DM SPL)
has been dropped, since a similar patch has been merged
in the meantime
* poweroff-gpio support is now added using sysreset uclass
instead of introducing a new poweroff uclass
* B1x5v2 patch has been updated to follow recent U-Boot
changes and to add USB mass storage support
[0] http://patchwork.ozlabs.org/project/uboot/list/?series=196979
-- Sebastian
Sebastian Reichel (9):
bootcount: add a DM SPI flash backing store for bootcount
rtc: m41t62: reset SQW in m41t62_rtc_reset
rtc: m41t62: add oscillator fail bit reset support
imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
sysreset: Add poweroff-gpio driver
board: ge: common: rename ge_common.c to ge_rtc.c
board: ge: common: add config option for RTC and VPD feature
board: ge: common: vpd: separate I2C specific code
board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6dl-b1x5v2.dts | 654
arch/arm/mach-imx/mx6/Kconfig | 9 +
arch/arm/mach-imx/mx6/clock.c | 2 +-
board/ge/b1x5v2/Kconfig | 14 +
board/ge/b1x5v2/Makefile | 6 +
board/ge/b1x5v2/b1x5v2.c | 698 ++
board/ge/b1x5v2/spl.c | 587 ++
board/ge/bx50v3/Kconfig | 2 +
board/ge/bx50v3/bx50v3.c | 4 +-
board/ge/common/Kconfig | 7 +
board/ge/common/Makefile | 3 +-
board/ge/common/{ge_common.c => ge_rtc.c} | 0
board/ge/common/{ge_common.h => ge_rtc.h} | 0
board/ge/common/vpd_reader.c | 12 +-
board/ge/common/vpd_reader.h | 23 +-
board/ge/mx53ppd/Kconfig | 2 +
board/ge/mx53ppd/mx53ppd.c | 4 +-
configs/ge_b1x5v2_defconfig | 137 +
drivers/bootcount/Kconfig | 10 +
drivers/bootcount/Makefile | 1 +
drivers/bootcount/spi-flash.c | 125
drivers/rtc/m41t62.c | 139 -
drivers/sysreset/Kconfig | 7 +
drivers/sysreset/Makefile | 1 +
drivers/sysreset/poweroff_gpio.c | 92 +++
include/configs/ge_b1x5v2.h | 127
27 files changed, 2645 insertions(+), 22 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-b1x5v2.dts
create mode 100644 board/ge/b1x5v2/Kconfig
create mode 100644 board/ge/b1x5v2/Makefile
create mode 100644 board/ge/b1x5v2/b1x5v2.c
create mode 100644 board/ge/b1x5v2/spl.c
create mode 100644 board/ge/common/Kconfig
rename board/ge/common/{ge_common.c => ge_rtc.c} (100%)
rename board/ge/common/{ge_common.h => ge_rtc.h} (100%)
create mode 100644 configs/ge_b1x5v2_defconfig
create mode 100644 drivers/bootcount/spi-flash.c
create mode 100644 drivers/sysreset/poweroff_gpio.c
create mode 100644 include/configs/ge_b1x5v2.h
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
Re: [PATCHv4 0/9] Introduce B1x5v2 support
Hi Sebastian,
I integrated the patches but the MAINTAINERS file for B1x5v2 is missing.
Can you send a follow-up patch to fix this ? (Or just a V5 for 9/9, your
choice).
Regards,
Stefano
On 02.09.20 19:31, Sebastian Reichel wrote:
This series introduces support for a new i.MX6DL based GE patient
monitor series.
Patch 1: Add support for storing bootcount in SPI-flash
Patch 2+3: Improve M41T62 RTC driver's reset routine.
PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL
Patch 5: Add poweroff-gpio support
Patch 6-8: restructure common GE code
Patch 9: Add the actual board, using SPL and DM
Changes since PATCHv3 [0]:
* Dropped patch for reading DR for i.MX GPIOs and set
SION pinmux bits in B1x5v2 output GPIOs instead
* Rebased to v2020.10-rc3
Changes since PATCHv2:
* PATCH 10: Fixed network phy mode ("rgmii" -> "rgmii-id")
* PATCH 6: Fixed nits reported by Simon Glass and added is
Reviewed-by Tag.
Changes since PATCHv1:
* Rebased to v2020.10-rc2
* Original patch 1 (support for DM_SPI_FLASH with non-DM SPL)
has been dropped, since a similar patch has been merged
in the meantime
* poweroff-gpio support is now added using sysreset uclass
instead of introducing a new poweroff uclass
* B1x5v2 patch has been updated to follow recent U-Boot
changes and to add USB mass storage support
[0] http://patchwork.ozlabs.org/project/uboot/list/?series=196979
-- Sebastian
Sebastian Reichel (9):
bootcount: add a DM SPI flash backing store for bootcount
rtc: m41t62: reset SQW in m41t62_rtc_reset
rtc: m41t62: add oscillator fail bit reset support
imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
sysreset: Add poweroff-gpio driver
board: ge: common: rename ge_common.c to ge_rtc.c
board: ge: common: add config option for RTC and VPD feature
board: ge: common: vpd: separate I2C specific code
board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx6dl-b1x5v2.dts| 654
arch/arm/mach-imx/mx6/Kconfig | 9 +
arch/arm/mach-imx/mx6/clock.c | 2 +-
board/ge/b1x5v2/Kconfig | 14 +
board/ge/b1x5v2/Makefile | 6 +
board/ge/b1x5v2/b1x5v2.c | 698 ++
board/ge/b1x5v2/spl.c | 587 ++
board/ge/bx50v3/Kconfig | 2 +
board/ge/bx50v3/bx50v3.c | 4 +-
board/ge/common/Kconfig | 7 +
board/ge/common/Makefile | 3 +-
board/ge/common/{ge_common.c => ge_rtc.c} | 0
board/ge/common/{ge_common.h => ge_rtc.h} | 0
board/ge/common/vpd_reader.c | 12 +-
board/ge/common/vpd_reader.h | 23 +-
board/ge/mx53ppd/Kconfig | 2 +
board/ge/mx53ppd/mx53ppd.c| 4 +-
configs/ge_b1x5v2_defconfig | 137 +
drivers/bootcount/Kconfig | 10 +
drivers/bootcount/Makefile| 1 +
drivers/bootcount/spi-flash.c | 125
drivers/rtc/m41t62.c | 139 -
drivers/sysreset/Kconfig | 7 +
drivers/sysreset/Makefile | 1 +
drivers/sysreset/poweroff_gpio.c | 92 +++
include/configs/ge_b1x5v2.h | 127
27 files changed, 2645 insertions(+), 22 deletions(-)
create mode 100644 arch/arm/dts/imx6dl-b1x5v2.dts
create mode 100644 board/ge/b1x5v2/Kconfig
create mode 100644 board/ge/b1x5v2/Makefile
create mode 100644 board/ge/b1x5v2/b1x5v2.c
create mode 100644 board/ge/b1x5v2/spl.c
create mode 100644 board/ge/common/Kconfig
rename board/ge/common/{ge_common.c => ge_rtc.c} (100%)
rename board/ge/common/{ge_common.h => ge_rtc.h} (100%)
create mode 100644 configs/ge_b1x5v2_defconfig
create mode 100644 drivers/bootcount/spi-flash.c
create mode 100644 drivers/sysreset/poweroff_gpio.c
create mode 100644 include/configs/ge_b1x5v2.h
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=
Re: [PATCHv4 0/9] Introduce B1x5v2 support
Hi Sebastian, On Wed, Sep 2, 2020 at 2:31 PM Sebastian Reichel wrote: > > This series introduces support for a new i.MX6DL based GE patient > monitor series. > > Patch 1: Add support for storing bootcount in SPI-flash > Patch 2+3: Improve M41T62 RTC driver's reset routine. > PATCH 4: Support disable_ldb_di_clock_sources for i.MX6DL > Patch 5: Add poweroff-gpio support > Patch 6-8: restructure common GE code > Patch 9: Add the actual board, using SPL and DM > > Changes since PATCHv3 [0]: > * Dropped patch for reading DR for i.MX GPIOs and set >SION pinmux bits in B1x5v2 output GPIOs instead > * Rebased to v2020.10-rc3 Thanks for the respin. This version looks good: Reviewed-by: Fabio Estevam
