Re: [U-Boot] Linux kernel only reporting 16M / 128M
Dear Kristoffer Ericson, In message 20100609110742.ga1...@boggieman you wrote: My flashing issues are now gone and will adress this later on. So the cause of the problems was the missing enabling of Vpp ? Anyhow, I noticed that linux kernel only reports 16M total memory while the board got 128M. Was just wondering where to start looking? Everything works fine inside u-boot so its not passed correctly or something, not sure how the linux kernel detects that. You RAM initialization in U-Boot seems to be broken. Check the number of rows/columns you program into your memory controller. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Weekends were made for programming. - Karl Lehenbauer ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Linux kernel only reporting 16M / 128M
On Wed, Jun 09, 2010 at 01:23:19PM +0200, Wolfgang Denk wrote: Dear Kristoffer Ericson, In message 20100609110742.ga1...@boggieman you wrote: My flashing issues are now gone and will adress this later on. So the cause of the problems was the missing enabling of Vpp ? So it seems, works fine now. Anyhow, I noticed that linux kernel only reports 16M total memory while the board got 128M. Was just wondering where to start looking? Everything works fine inside u-boot so its not passed correctly or something, not sure how the linux kernel detects that. You RAM initialization in U-Boot seems to be broken. Check the number of rows/columns you program into your memory controller. Hmm, will do that. However it seems to work fine in u-boot, I can see and access all memory. Also, the bootargs are not getting passed to the kernel, so might be same for memory tag? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Weekends were made for programming. - Karl Lehenbauer ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] Linux kernel only reporting 16M / 128M
On Wed, Jun 09, 2010 at 01:23:19PM +0200, Wolfgang Denk wrote: Dear Kristoffer Ericson, In message 20100609110742.ga1...@boggieman you wrote: My flashing issues are now gone and will adress this later on. So the cause of the problems was the missing enabling of Vpp ? Anyhow, I noticed that linux kernel only reports 16M total memory while the board got 128M. Was just wondering where to start looking? Everything works fine inside u-boot so its not passed correctly or something, not sure how the linux kernel detects that. You RAM initialization in U-Boot seems to be broken. Check the number of rows/columns you program into your memory controller. It works now, had missed exporting the bootparams adress in my board init. :) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Weekends were made for programming. - Karl Lehenbauer ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
