Re: [U2] Proc question
If I follow your question:
001 PQN
002 MV %1 "XX*YYYNN"
003 O--
004 T "Input value:",%1
005 T "Desired output:",%1:G1*1:
006 S2
007 IH%1:G1*1:
008 T "Current content of %2:",%2
This will place 'YYYNN' into buffer %2
... david ...
David L. Waz
Pick Professionals, Inc.
-Original Message-
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of John Jenkins
Sent: Thursday, May 10, 2012 4:48 PM
To: U2 Users List
Cc: U2 Users List
Subject: Re: [U2] Proc question
I use PQN PROCs regularly, including indirect buffer references (subscripts)
and select buffer manipulation, UniData and UniVerse do have significant
differences though. MV for primary and secondary input and output buffers is a
staple, but sometimes the older style A\ and similar become invaluable.
PROC on!
The Jonathan Sisk references are a good start, I learned on Reality way back. I
do recall a PL system being written in PROC at one time - and no, The
explanation why is too improbable to believe, so I'll spare you.
Regards
JayJay
On 10 May 2012, at 04:27, Ed Clark wrote:
> PQN procs are supported in unidata for sure. Just wasn't sure if the
> conversions on the MV command work there.
>
> You can use the universe proverb documentation as a starting point for
> working with procs in unidata, but there are a lot of differences, including
> some fundamental ones. For example, both PQ and PQN proc on universe use
> attribute marks to delimit fields in the buffers, but PQ proc in unidata uses
> the "standard" space delimiters.The universe proverb manual doesn't
> mention conversions on the MV command
>
> On May 9, 2012, at 11:23 AM, Brenda Ives wrote:
>
>> Guide to ProVerb - UniVerse proc documentation.
>>
>> Brenda L Ives
>> UniVerse Team Lead
>> Rapid Response Team
>> marketamerica.com/SHOP.COM
>> Greensboro, NC
>> 336-389-5950
>>
>> RRT Team Red
>>
>>
>> -Original Message-
>> From: u2-users-boun...@listserver.u2ug.org
>> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
>> Sent: Wednesday, May 09, 2012 11:05 AM
>> To: u2-users@listserver.u2ug.org
>> Subject: Re: [U2] Proc question
>>
>>
>> Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
>> used them or seen a manual for them. Like you I have not found anything in
>> the udtdocs that addresses Proc eitherKebbon
>>
>>> From: u...@edclark.net
>>> Date: Mon, 7 May 2012 22:58:31 -0400
>>> To: u2-users@listserver.u2ug.org
>>> Subject: Re: [U2] Proc question
>>>
>>>
>>> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>>>
>>>>
>>>> Anyone know/remember how to do this:I have a string in my input buffer
>>>> XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
>>>> able to do this without writing my own user mode or a program that does a
>>>> procread/procwriteThanks,Kebbon
>>>> Unidata 7.1 Ecltype P
>>>> ___
>>>> U2-Users mailing list
>>>> U2-Users@listserver.u2ug.org
>>>> http://listserver.u2ug.org/mailman/listinfo/u2-users
>>>
>>> I don't know if unidata supports this (has anyone ever seen a unidata proc
>>> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>>>
>>> MV
>>>
>>> Purpose
>>>
>>> To copy data between the input buffer, output buffers, file buffers and
>>> select registers.
>>>
>>> Syntax
>>>
>>> MV destination source{,source}...{,*{n}}{,_}
>>>
>>> or
>>>
>>> MV destination source{*source}...
>>>
>>> Syntax Elements
>>>
>>> destinationis a direct or indirect reference to a buffer or
>>> select register that you want the data copied to. If the destination is a
>>> select register, the source can only be a direct or indirect reference to a
>>> file buffer.
>>>
>>> source is the data you want to copy. The source can be:
>>>
>>> * a direct or indirect reference to a buffer or select register that
>>> contains the data you want to copy.
>>>
>>> * a direct or indirect reference to a buffer followed by
>>> ';input-conversion;' or ':output-conversion:'. See the topic English
Re: [U2] Proc question
I use PQN PROCs regularly, including indirect buffer references (subscripts)
and select buffer manipulation, UniData and UniVerse do have significant
differences though. MV for primary and secondary input and output buffers is a
staple, but sometimes the older style A\ and similar become invaluable.
PROC on!
The Jonathan Sisk references are a good start, I learned on Reality way back. I
do recall a PL system being written in PROC at one time - and no, The
explanation why is too improbable to believe, so I'll spare you.
Regards
JayJay
On 10 May 2012, at 04:27, Ed Clark wrote:
> PQN procs are supported in unidata for sure. Just wasn't sure if the
> conversions on the MV command work there.
>
> You can use the universe proverb documentation as a starting point for
> working with procs in unidata, but there are a lot of differences, including
> some fundamental ones. For example, both PQ and PQN proc on universe use
> attribute marks to delimit fields in the buffers, but PQ proc in unidata uses
> the "standard" space delimiters.The universe proverb manual doesn't
> mention conversions on the MV command
>
> On May 9, 2012, at 11:23 AM, Brenda Ives wrote:
>
>> Guide to ProVerb - UniVerse proc documentation.
>>
>> Brenda L Ives
>> UniVerse Team Lead
>> Rapid Response Team
>> marketamerica.com/SHOP.COM
>> Greensboro, NC
>> 336-389-5950
>>
>> RRT Team Red
>>
>>
>> -Original Message-
>> From: u2-users-boun...@listserver.u2ug.org
>> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
>> Sent: Wednesday, May 09, 2012 11:05 AM
>> To: u2-users@listserver.u2ug.org
>> Subject: Re: [U2] Proc question
>>
>>
>> Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
>> used them or seen a manual for them. Like you I have not found anything in
>> the udtdocs that addresses Proc eitherKebbon
>>
>>> From: u...@edclark.net
>>> Date: Mon, 7 May 2012 22:58:31 -0400
>>> To: u2-users@listserver.u2ug.org
>>> Subject: Re: [U2] Proc question
>>>
>>>
>>> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>>>
>>>>
>>>> Anyone know/remember how to do this:I have a string in my input buffer
>>>> XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
>>>> able to do this without writing my own user mode or a program that does a
>>>> procread/procwriteThanks,Kebbon
>>>> Unidata 7.1 Ecltype P
>>>> ___
>>>> U2-Users mailing list
>>>> U2-Users@listserver.u2ug.org
>>>> http://listserver.u2ug.org/mailman/listinfo/u2-users
>>>
>>> I don't know if unidata supports this (has anyone ever seen a unidata proc
>>> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>>>
>>> MV
>>>
>>> Purpose
>>>
>>> To copy data between the input buffer, output buffers, file buffers and
>>> select registers.
>>>
>>> Syntax
>>>
>>> MV destination source{,source}...{,*{n}}{,_}
>>>
>>> or
>>>
>>> MV destination source{*source}...
>>>
>>> Syntax Elements
>>>
>>> destinationis a direct or indirect reference to a buffer or
>>> select register that you want the data copied to. If the destination is a
>>> select register, the source can only be a direct or indirect reference to a
>>> file buffer.
>>>
>>> source is the data you want to copy. The source can be:
>>>
>>> * a direct or indirect reference to a buffer or select register that
>>> contains the data you want to copy.
>>>
>>> * a direct or indirect reference to a buffer followed by
>>> ';input-conversion;' or ':output-conversion:'. See the topic English
>>> Conversions for details.
>>>
>>> *a string of zero or more characters enclosed in single or double
>>> quotes. An uneven number of quotes now gives a syntax error.
>>>
>>> *a SYSTEM function that returns system/database information.
>>>
>>> * a single character expressed in one of two ways:
>>>
>>> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
>>> value mark.
>>>
>>> In where n is a decimal number in the range 0 to 255.
Re: [U2] Proc question
In a PQN PROC, in addition to the MV command, the IH command can do output
conversions:
MV %2 ""
IH%1:G1*1:
Or input conversions:
IH%2;D;
-Original Message-
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Ed Clark
Sent: May-09-12 8:28 PM
To: U2 Users List
Subject: Re: [U2] Proc question
PQN procs are supported in unidata for sure. Just wasn't sure if the
conversions on the MV command work there.
You can use the universe proverb documentation as a starting point for working
with procs in unidata, but there are a lot of differences, including some
fundamental ones. For example, both PQ and PQN proc on universe use attribute
marks to delimit fields in the buffers, but PQ proc in unidata uses the
"standard" space delimiters.The universe proverb manual doesn't mention
conversions on the MV command
On May 9, 2012, at 11:23 AM, Brenda Ives wrote:
> Guide to ProVerb - UniVerse proc documentation.
>
> Brenda L Ives
> UniVerse Team Lead
> Rapid Response Team
> marketamerica.com/SHOP.COM
> Greensboro, NC
> 336-389-5950
>
> RRT Team Red
>
>
> -Original Message-
> From: u2-users-boun...@listserver.u2ug.org
> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
> Sent: Wednesday, May 09, 2012 11:05 AM
> To: u2-users@listserver.u2ug.org
> Subject: Re: [U2] Proc question
>
>
> Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
> used them or seen a manual for them. Like you I have not found anything in
> the udtdocs that addresses Proc eitherKebbon
>
>> From: u...@edclark.net
>> Date: Mon, 7 May 2012 22:58:31 -0400
>> To: u2-users@listserver.u2ug.org
>> Subject: Re: [U2] Proc question
>>
>>
>> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>>
>>>
>>> Anyone know/remember how to do this:I have a string in my input buffer
>>> XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
>>> able to do this without writing my own user mode or a program that does a
>>> procread/procwriteThanks,Kebbon
>>> Unidata 7.1 Ecltype P
>>> ___
>>> U2-Users mailing list
>>> U2-Users@listserver.u2ug.org
>>> http://listserver.u2ug.org/mailman/listinfo/u2-users
>>
>> I don't know if unidata supports this (has anyone ever seen a unidata proc
>> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>>
>> MV
>>
>> Purpose
>>
>> To copy data between the input buffer, output buffers, file buffers and
>> select registers.
>>
>> Syntax
>>
>> MV destination source{,source}...{,*{n}}{,_}
>>
>> or
>>
>> MV destination source{*source}...
>>
>> Syntax Elements
>>
>> destinationis a direct or indirect reference to a buffer or
>> select register that you want the data copied to. If the destination is a
>> select register, the source can only be a direct or indirect reference to a
>> file buffer.
>>
>> source is the data you want to copy. The source can be:
>>
>> * a direct or indirect reference to a buffer or select register that
>> contains the data you want to copy.
>>
>> * a direct or indirect reference to a buffer followed by
>> ';input-conversion;' or ':output-conversion:'. See the topic English
>> Conversions for details.
>>
>> *a string of zero or more characters enclosed in single or double
>> quotes. An uneven number of quotes now gives a syntax error.
>>
>> *a SYSTEM function that returns system/database information.
>>
>> * a single character expressed in one of two ways:
>>
>> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
>> value mark.
>>
>> In where n is a decimal number in the range 0 to 255. Thus, I253 is a
>> value mark.
>>
>> ,* copies all source parameters starting with the
>> specified parameter. The destination buffer or select register is truncated
>> after the last parameter is copied if * is the last operand in the source
>> field.
>>
>> ,*n copies n further source parameters following
>> (and in addition to) the specified parameter.
>>
>> ,_ specifies that the destination is truncated
>> after the source is copied.
>>
>> *source concatenates the source values into one attribute
>> in t
Re: [U2] Proc question
PQN procs are supported in unidata for sure. Just wasn't sure if the
conversions on the MV command work there.
You can use the universe proverb documentation as a starting point for working
with procs in unidata, but there are a lot of differences, including some
fundamental ones. For example, both PQ and PQN proc on universe use attribute
marks to delimit fields in the buffers, but PQ proc in unidata uses the
"standard" space delimiters.The universe proverb manual doesn't mention
conversions on the MV command
On May 9, 2012, at 11:23 AM, Brenda Ives wrote:
> Guide to ProVerb - UniVerse proc documentation.
>
> Brenda L Ives
> UniVerse Team Lead
> Rapid Response Team
> marketamerica.com/SHOP.COM
> Greensboro, NC
> 336-389-5950
>
> RRT Team Red
>
>
> -Original Message-
> From: u2-users-boun...@listserver.u2ug.org
> [mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
> Sent: Wednesday, May 09, 2012 11:05 AM
> To: u2-users@listserver.u2ug.org
> Subject: Re: [U2] Proc question
>
>
> Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
> used them or seen a manual for them. Like you I have not found anything in
> the udtdocs that addresses Proc eitherKebbon
>
>> From: u...@edclark.net
>> Date: Mon, 7 May 2012 22:58:31 -0400
>> To: u2-users@listserver.u2ug.org
>> Subject: Re: [U2] Proc question
>>
>>
>> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>>
>>>
>>> Anyone know/remember how to do this:I have a string in my input buffer
>>> XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
>>> able to do this without writing my own user mode or a program that does a
>>> procread/procwriteThanks,Kebbon
>>> Unidata 7.1 Ecltype P
>>> ___
>>> U2-Users mailing list
>>> U2-Users@listserver.u2ug.org
>>> http://listserver.u2ug.org/mailman/listinfo/u2-users
>>
>> I don't know if unidata supports this (has anyone ever seen a unidata proc
>> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>>
>> MV
>>
>> Purpose
>>
>> To copy data between the input buffer, output buffers, file buffers and
>> select registers.
>>
>> Syntax
>>
>> MV destination source{,source}...{,*{n}}{,_}
>>
>> or
>>
>> MV destination source{*source}...
>>
>> Syntax Elements
>>
>> destinationis a direct or indirect reference to a buffer or
>> select register that you want the data copied to. If the destination is a
>> select register, the source can only be a direct or indirect reference to a
>> file buffer.
>>
>> source is the data you want to copy. The source can be:
>>
>> * a direct or indirect reference to a buffer or select register that
>> contains the data you want to copy.
>>
>> * a direct or indirect reference to a buffer followed by
>> ';input-conversion;' or ':output-conversion:'. See the topic English
>> Conversions for details.
>>
>> *a string of zero or more characters enclosed in single or double
>> quotes. An uneven number of quotes now gives a syntax error.
>>
>> *a SYSTEM function that returns system/database information.
>>
>> * a single character expressed in one of two ways:
>>
>> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
>> value mark.
>>
>> In where n is a decimal number in the range 0 to 255. Thus, I253 is a
>> value mark.
>>
>> ,* copies all source parameters starting with the
>> specified parameter. The destination buffer or select register is truncated
>> after the last parameter is copied if * is the last operand in the source
>> field.
>>
>> ,*n copies n further source parameters following
>> (and in addition to) the specified parameter.
>>
>> ,_ specifies that the destination is truncated
>> after the source is copied.
>>
>> *source concatenates the source values into one attribute
>> in the destination.
>>
>> Select Register Destination
>>
>> If you use a select register as the destination, then the only valid source
>> is a direct or indirect reference to a file buffer. For example:
>>
>> MV !1 &5.9 or MV !3 &3.%1
&g
Re: [U2] Proc question
What I can remember about moving a partial string using Unidata input
buffer to an output buffer you can use the following:
A(4,8)
Which will move the 4th through the 8th character to the currently
active output buffer.
Thanks
Laura W
-Original Message-
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Brenda Ives
Sent: Wednesday, May 09, 2012 11:23 AM
To: 'U2 Users List'
Subject: Re: [U2] Proc question
Guide to ProVerb - UniVerse proc documentation.
Brenda L Ives
UniVerse Team Lead
Rapid Response Team
marketamerica.com/SHOP.COM
Greensboro, NC
336-389-5950
RRT Team Red
-Original Message-
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
Sent: Wednesday, May 09, 2012 11:05 AM
To: u2-users@listserver.u2ug.org
Subject: Re: [U2] Proc question
Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have
never used them or seen a manual for them. Like you I have not found
anything in the udtdocs that addresses Proc eitherKebbon
> From: u...@edclark.net
> Date: Mon, 7 May 2012 22:58:31 -0400
> To: u2-users@listserver.u2ug.org
> Subject: Re: [U2] Proc question
>
>
> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>
> >
> > Anyone know/remember how to do this:I have a string in my input
buffer XX*YYYNNI want to place just YYYNN in my output bufferI feel I
should be able to do this without writing my own user mode or a program
that does a procread/procwriteThanks,Kebbon
> > Unidata 7.1 Ecltype P
> > ___
> > U2-Users mailing list
> > U2-Users@listserver.u2ug.org
> > http://listserver.u2ug.org/mailman/listinfo/u2-users
>
> I don't know if unidata supports this (has anyone ever seen a unidata
proc manual?) but in PQN proc on Reality, the MV command can apply a
conversion:
>
> MV
>
> Purpose
>
> To copy data between the input buffer, output buffers, file buffers
and select registers.
>
> Syntax
>
> MV destination source{,source}...{,*{n}}{,_}
>
> or
>
> MV destination source{*source}...
>
> Syntax Elements
>
> destinationis a direct or indirect reference to a buffer
or select register that you want the data copied to. If the destination
is a select register, the source can only be a direct or indirect
reference to a file buffer.
>
> source is the data you want to copy. The source can
be:
>
> * a direct or indirect reference to a buffer or select register
that contains the data you want to copy.
>
> * a direct or indirect reference to a buffer followed by
';input-conversion;' or ':output-conversion:'. See the topic English
Conversions for details.
>
> *a string of zero or more characters enclosed in single or
double quotes. An uneven number of quotes now gives a syntax error.
>
> *a SYSTEM function that returns system/database information.
>
> * a single character expressed in one of two ways:
>
> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD
is a value mark.
>
> In where n is a decimal number in the range 0 to 255. Thus, I253
is a value mark.
>
> ,* copies all source parameters starting
with the specified parameter. The destination buffer or select register
is truncated after the last parameter is copied if * is the last operand
in the source field.
>
> ,*n copies n further source parameters
following (and in addition to) the specified parameter.
>
> ,_ specifies that the destination is
truncated after the source is copied.
>
> *source concatenates the source values into one
attribute in the destination.
>
> Select Register Destination
>
> If you use a select register as the destination, then the only valid
source is a direct or indirect reference to a file buffer. For example:
>
> MV !1 &5.9 or MV !3 &3.%1
>
> Creating Null Attributes or Parameters
>
> If the attribute or parameter number in destination is larger than the
current number of attributes or parameters, the Proc processor
automatically creates null values to space out to the requested
location.
>
> If the source is a literal string containing just two double quotes,
then the destination is nulled.
>
> Input Buffer Pointer
>
> If you reference the primary input buffer as the destination, that
buffer is selected as active and the buffer pointer is positioned at the
beginning of the moved string.
>
> Copying a Series of Values
>
> If you give a series of values as the source, the first value is
cop
Re: [U2] Proc question
Guide to ProVerb - UniVerse proc documentation.
Brenda L Ives
UniVerse Team Lead
Rapid Response Team
marketamerica.com/SHOP.COM
Greensboro, NC
336-389-5950
RRT Team Red
-Original Message-
From: u2-users-boun...@listserver.u2ug.org
[mailto:u2-users-boun...@listserver.u2ug.org] On Behalf Of Kebbon Irwin
Sent: Wednesday, May 09, 2012 11:05 AM
To: u2-users@listserver.u2ug.org
Subject: Re: [U2] Proc question
Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
used them or seen a manual for them. Like you I have not found anything in the
udtdocs that addresses Proc eitherKebbon
> From: u...@edclark.net
> Date: Mon, 7 May 2012 22:58:31 -0400
> To: u2-users@listserver.u2ug.org
> Subject: Re: [U2] Proc question
>
>
> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>
> >
> > Anyone know/remember how to do this:I have a string in my input buffer
> > XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
> > able to do this without writing my own user mode or a program that does a
> > procread/procwriteThanks,Kebbon
> > Unidata 7.1 Ecltype P
> > ___
> > U2-Users mailing list
> > U2-Users@listserver.u2ug.org
> > http://listserver.u2ug.org/mailman/listinfo/u2-users
>
> I don't know if unidata supports this (has anyone ever seen a unidata proc
> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>
> MV
>
> Purpose
>
> To copy data between the input buffer, output buffers, file buffers and
> select registers.
>
> Syntax
>
> MV destination source{,source}...{,*{n}}{,_}
>
> or
>
> MV destination source{*source}...
>
> Syntax Elements
>
> destinationis a direct or indirect reference to a buffer or
> select register that you want the data copied to. If the destination is a
> select register, the source can only be a direct or indirect reference to a
> file buffer.
>
> source is the data you want to copy. The source can be:
>
> * a direct or indirect reference to a buffer or select register that
> contains the data you want to copy.
>
> * a direct or indirect reference to a buffer followed by
> ';input-conversion;' or ':output-conversion:'. See the topic English
> Conversions for details.
>
> *a string of zero or more characters enclosed in single or double
> quotes. An uneven number of quotes now gives a syntax error.
>
> *a SYSTEM function that returns system/database information.
>
> * a single character expressed in one of two ways:
>
> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
> value mark.
>
> In where n is a decimal number in the range 0 to 255. Thus, I253 is a
> value mark.
>
> ,* copies all source parameters starting with the
> specified parameter. The destination buffer or select register is truncated
> after the last parameter is copied if * is the last operand in the source
> field.
>
> ,*n copies n further source parameters following (and
> in addition to) the specified parameter.
>
> ,_ specifies that the destination is truncated after
> the source is copied.
>
> *source concatenates the source values into one attribute in
> the destination.
>
> Select Register Destination
>
> If you use a select register as the destination, then the only valid source
> is a direct or indirect reference to a file buffer. For example:
>
> MV !1 &5.9 or MV !3 &3.%1
>
> Creating Null Attributes or Parameters
>
> If the attribute or parameter number in destination is larger than the
> current number of attributes or parameters, the Proc processor automatically
> creates null values to space out to the requested location.
>
> If the source is a literal string containing just two double quotes, then the
> destination is nulled.
>
> Input Buffer Pointer
>
> If you reference the primary input buffer as the destination, that buffer is
> selected as active and the buffer pointer is positioned at the beginning of
> the moved string.
>
> Copying a Series of Values
>
> If you give a series of values as the source, the first value is copied into
> the destination, and each subsequent source value is copied to a successive
> location in the destination buffer. For example:
>
> MV %2 &2.7,"ABC",!2
>
> copies attribute 7 of file buffer 2, the string "ABC", and the next value
> from select reg
Re: [U2] Proc question
Hi Ed,I am pretty sure that PQN procs are supported in Unidata, I have never
used them or seen a manual for them. Like you I have not found anything in the
udtdocs that addresses Proc eitherKebbon
> From: u...@edclark.net
> Date: Mon, 7 May 2012 22:58:31 -0400
> To: u2-users@listserver.u2ug.org
> Subject: Re: [U2] Proc question
>
>
> On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>
> >
> > Anyone know/remember how to do this:I have a string in my input buffer
> > XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be
> > able to do this without writing my own user mode or a program that does a
> > procread/procwriteThanks,Kebbon
> > Unidata 7.1 Ecltype P
> > ___
> > U2-Users mailing list
> > U2-Users@listserver.u2ug.org
> > http://listserver.u2ug.org/mailman/listinfo/u2-users
>
> I don't know if unidata supports this (has anyone ever seen a unidata proc
> manual?) but in PQN proc on Reality, the MV command can apply a conversion:
>
> MV
>
> Purpose
>
> To copy data between the input buffer, output buffers, file buffers and
> select registers.
>
> Syntax
>
> MV destination source{,source}...{,*{n}}{,_}
>
> or
>
> MV destination source{*source}...
>
> Syntax Elements
>
> destinationis a direct or indirect reference to a buffer or
> select register that you want the data copied to. If the destination is a
> select register, the source can only be a direct or indirect reference to a
> file buffer.
>
> source is the data you want to copy. The source can be:
>
> · a direct or indirect reference to a buffer or select register that
> contains the data you want to copy.
>
> · a direct or indirect reference to a buffer followed by
> ';input-conversion;' or ':output-conversion:'. See the topic English
> Conversions for details.
>
> ·a string of zero or more characters enclosed in single or double
> quotes. An uneven number of quotes now gives a syntax error.
>
> ·a SYSTEM function that returns system/database information.
>
> · a single character expressed in one of two ways:
>
> Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
> value mark.
>
> In where n is a decimal number in the range 0 to 255. Thus, I253 is a
> value mark.
>
> ,* copies all source parameters starting with the
> specified parameter. The destination buffer or select register is truncated
> after the last parameter is copied if * is the last operand in the source
> field.
>
> ,*n copies n further source parameters following (and
> in addition to) the specified parameter.
>
> ,_ specifies that the destination is truncated after
> the source is copied.
>
> *source concatenates the source values into one attribute in
> the destination.
>
> Select Register Destination
>
> If you use a select register as the destination, then the only valid source
> is a direct or indirect reference to a file buffer. For example:
>
> MV !1 &5.9 or MV !3 &3.%1
>
> Creating Null Attributes or Parameters
>
> If the attribute or parameter number in destination is larger than the
> current number of attributes or parameters, the Proc processor automatically
> creates null values to space out to the requested location.
>
> If the source is a literal string containing just two double quotes, then the
> destination is nulled.
>
> Input Buffer Pointer
>
> If you reference the primary input buffer as the destination, that buffer is
> selected as active and the buffer pointer is positioned at the beginning of
> the moved string.
>
> Copying a Series of Values
>
> If you give a series of values as the source, the first value is copied into
> the destination, and each subsequent source value is copied to a successive
> location in the destination buffer. For example:
>
> MV %2 &2.7,"ABC",!2
>
> copies attribute 7 of file buffer 2, the string "ABC", and the next value
> from select register 2 into the 2nd, 3rd, and 4th parameters of the primary
> input buffer.
>
> Preserving Parameters/
> Attributes
>
> If you want to change more than one attribute or parameter without changing
> the attributes or parameters in between, you must use commas in the source
> field to preserve those attributes or parameters.
>
> For example, if the primary input buffer contains A
Re: [U2] Proc question
Keith, you ROCK!!! Thanks for exactly what I needed. I have used things like A2,999 to pass a large swath of buffer contents, but I had never done or seen a substring. Great stuff!Kebbon > From: keith.john...@datacom.co.nz > To: u2-users@listserver.u2ug.org > Date: Wed, 9 May 2012 10:12:00 +1200 > Subject: Re: [U2] Proc question > > Hi Kebbon, > > I don't like Procs, but > > * Set the primary input buffer as active > SP > * Activate the primary output buffer > STOFF > * Alternatively, clear both output buffers and make the primary the active one > RO > * Set the input buffer pointer to the first (or whatever) parameter > S1 > * Move a substring in the that parameter from the active input buffer to the > end of the active output buffer with no surround character > A\(4,5) > > > Regards, Keith > > ___ > U2-Users mailing list > U2-Users@listserver.u2ug.org > http://listserver.u2ug.org/mailman/listinfo/u2-users ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] Proc question
Hi Kebbon, I don't like Procs, but * Set the primary input buffer as active SP * Activate the primary output buffer STOFF * Alternatively, clear both output buffers and make the primary the active one RO * Set the input buffer pointer to the first (or whatever) parameter S1 * Move a substring in the that parameter from the active input buffer to the end of the active output buffer with no surround character A\(4,5) Regards, Keith ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
Re: [U2] Proc question
On May 7, 2012, at 4:45 PM, Kebbon Irwin wrote:
>
> Anyone know/remember how to do this:I have a string in my input buffer
> XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be able
> to do this without writing my own user mode or a program that does a
> procread/procwriteThanks,Kebbon
> Unidata 7.1 Ecltype P
> ___
> U2-Users mailing list
> U2-Users@listserver.u2ug.org
> http://listserver.u2ug.org/mailman/listinfo/u2-users
I don't know if unidata supports this (has anyone ever seen a unidata proc
manual?) but in PQN proc on Reality, the MV command can apply a conversion:
MV
Purpose
To copy data between the input buffer, output buffers, file buffers and select
registers.
Syntax
MV destination source{,source}...{,*{n}}{,_}
or
MV destination source{*source}...
Syntax Elements
destinationis a direct or indirect reference to a buffer or select
register that you want the data copied to. If the destination is a select
register, the source can only be a direct or indirect reference to a file
buffer.
source is the data you want to copy. The source can be:
· a direct or indirect reference to a buffer or select register that
contains the data you want to copy.
· a direct or indirect reference to a buffer followed by
';input-conversion;' or ':output-conversion:'. See the topic English
Conversions for details.
·a string of zero or more characters enclosed in single or double
quotes. An uneven number of quotes now gives a syntax error.
·a SYSTEM function that returns system/database information.
· a single character expressed in one of two ways:
Xxwhere x is a hexadecimal number in the range 00 to FF. Thus, XFD is a
value mark.
In where n is a decimal number in the range 0 to 255. Thus, I253 is a value
mark.
,* copies all source parameters starting with the
specified parameter. The destination buffer or select register is truncated
after the last parameter is copied if * is the last operand in the source field.
,*n copies n further source parameters following (and
in addition to) the specified parameter.
,_ specifies that the destination is truncated after
the source is copied.
*source concatenates the source values into one attribute in
the destination.
Select Register Destination
If you use a select register as the destination, then the only valid source is
a direct or indirect reference to a file buffer. For example:
MV !1 &5.9 or MV !3 &3.%1
Creating Null Attributes or Parameters
If the attribute or parameter number in destination is larger than the current
number of attributes or parameters, the Proc processor automatically creates
null values to space out to the requested location.
If the source is a literal string containing just two double quotes, then the
destination is nulled.
Input Buffer Pointer
If you reference the primary input buffer as the destination, that buffer is
selected as active and the buffer pointer is positioned at the beginning of the
moved string.
Copying a Series of Values
If you give a series of values as the source, the first value is copied into
the destination, and each subsequent source value is copied to a successive
location in the destination buffer. For example:
MV %2 &2.7,"ABC",!2
copies attribute 7 of file buffer 2, the string "ABC", and the next value from
select register 2 into the 2nd, 3rd, and 4th parameters of the primary input
buffer.
Preserving Parameters/
Attributes
If you want to change more than one attribute or parameter without changing the
attributes or parameters in between, you must use commas in the source field to
preserve those attributes or parameters.
For example, if the primary input buffer contains ABC^DEF^GHI^JKL, and you
issue the following command,
MV %1 "XX",,,""
the result is XX^DEF^GHI^. The command replaces the 1st and 4th parameters
with new values, leaving the 2nd and 3rd parameters unaltered.
Concatenation
If you separate a series of source values with asterisks (*) instead of commas,
the source values are concatenated into one attribute in the destination. For
example:
MV %2 &1.7*"TEXT"*%4
concatenates the 4th attribute of the primary input buffer to the string
"TEXT", then concatenates that result to attribute 7 of file buffer 1, then
copies the result as a single parameter into the 2nd parameter of the primary
input buffer.
Truncation
If you specify an underline (_) as the last item in the source field, the
specified destination is truncated after the last source is copied.
Copying the Entire Contents of a Buffer
If you specify an asterisk (*) as the last item in a source field, all
attributes or parameters starting with the specified attribute or parameter are
copied. For exampl
[U2] Proc question
Anyone know/remember how to do this:I have a string in my input buffer XX*YYYNNI want to place just YYYNN in my output bufferI feel I should be able to do this without writing my own user mode or a program that does a procread/procwriteThanks,Kebbon Unidata 7.1 Ecltype P ___ U2-Users mailing list U2-Users@listserver.u2ug.org http://listserver.u2ug.org/mailman/listinfo/u2-users
RE: [U2] PROC question
> PQ > 10 C Top of Main Menu > RI > RO > OA number of lines that display the available menu choices ... > OEnter choice + > IP: > IF # A X > IF A = 1 GO 100 > ... > IF A = 99 GO 990 You might as well use the multi-valued IF/GO, ie. IF A = 1]...]99 GO 100]...]990 Where ] is a value-mark character. Then the PROC only has to process a single IF instead of multiple. --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC question
Look for any PROCREAD or PROCWRITE statements as well in the programs. - Original Message - From: "John Hester" <[EMAIL PROTECTED]> To: Sent: Wednesday, January 25, 2006 4:41 PM Subject: Re: [U2] PROC question > Bob Woodward wrote: > > Maybe I'm just missing the finer points of PROC processing. I've got a > > MENU proc that's structured like this: > > > > PQ > > 10 C Top of Main Menu > > OA number of lines that display the available menu choices > > ... > > OEnter choice + > > IP: > > IF # A X > > IF A = 1 [PROD.PL PROG1.PROC > > IF A = 1 G 10 > > ... > > IF A = 99 [PROD.PL PROG99.PROC > > IF A = 99 G 10 > > O > > O That is not a valid menu choice. > > OPRESS [ENTER] + > > IP > > G 10 > > > > My problem is when I come back from one of the PROGxx.PROC's, I'm not > > getting the menu choice value back to execute the G 10 command. Instead > > it displays the error message at the bottom. > > As others have pointed out, the problem is likely that your input buffer > is getting cleared. One easy way around this is to change the structure > of your menu proc so you don't have to worry about the input buffer > after the call to the program proc is made. All of our menu procs have > this basic structure: > > PQ > 10 C Top of Main Menu > OA number of lines that display the available menu choices > ... > OEnter choice + > IP: > IF # A X > IF A = 1 GO 100 > IF A = 2 GO 200 > IF A = 3 GO 300 > GO 10 > 100 [PROGRAM PROC > GO 10 > 200 [PROGRAM PROC > GO 10 > 300 [PROGRAM PROC > GO 10 > > We have a proc like this named BLANK.MENU that we just copy and modify > anytime we need a new one. > > -John > -- > John Hester > System & Network Administrator > Momentum Group Inc. > (949) 833-8886 x623 > http://memosamples.com > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
Bob: Since the PROC buffer is getting trashed by the called PROC change the menu PROC to a more suitable format like: PQ 10 C Top of Main Menu RI RO OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 GO 100 ... IF A = 99 GO 990 O O That is not a valid menu choice. OPRESS [ENTER] + IP GO 10 C--> 100 C Option# 1 [PROD.PL PROG1.PROC GO 10 ... 990 C Option# 99 [PROD.PL PROG99.PROC GO 10 Hope this helps. :-) Bill > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Glenn Herbert > Sent: Wednesday, January 25, 2006 1:01 PM > To: u2-users@listserver.u2ug.org > Subject: Re: [U2] PROC question > > If this is for universe, the problem here stems from the fact > that your [PROD.xx procs are stomping all over the buffers of > the main menu proc. > There's not really much you can do about that, but you could > modify your main proc slightly as follows: > > 0001: PQ > 002 F-OPEN 1 VOC > 003 XNO VOC > 004 10 C TOP > 005 OEnter choice+ > 006 S1 > 007 IP: > 008 IF # A X > 009 MV &1.1 %1 > 010 IF A = 1 [VOC YYY > 011 IF &1.1 = 1 GO 10 > 012 IF A = 99 [VOC ZZZ > 013 IF &1.1 = 99 GO 10 > 014 O > 015 O > 016 ONOT VALID. PRESS ENTER+ > 017 IP: > 018 GO 10 > > In order to save your entry, you can't use input, output or > select list buffers - you are then left with using a file > channel (since you probably don't want to write anything > here). So at line 2 and 3, open the VOC file to channel 1 > and use that as a holder. Line 7 is used to make certain > input is always done on the first field. Line 9 then is used > to transfer your users input value into the first field of > the file channel - you then use the file channel as your test > to return to the menu (lines 11 and 13). > This means you should only have to modify slightly your > main menu program to retain the input value and not have to > modify the PROCxx files. > _ > "I reject your reality and substitute my own" - Adam Savage > > Glenn M. Herbert - Connectivity Development Engineer > Information Integration Solutions, IBM Software Group 50 > Washington Street Westboro, MA 01581 > 508-599-7281 direct > > [EMAIL PROTECTED] wrote on 01/25/2006 02:54:05 PM: > > > Hi folks, > > > > Maybe I'm just missing the finer points of PROC processing. > I've got > > a MENU proc that's structured like this: > > > > PQ > > 10 C Top of Main Menu > > OA number of lines that display the available menu choices ... > > OEnter choice + > > IP: > > IF # A X > > IF A = 1 [PROD.PL PROG1.PROC > > IF A = 1 G 10 > > ... > > IF A = 99 [PROD.PL PROG99.PROC > > IF A = 99 G 10 > > O > > O That is not a valid menu choice. > > OPRESS [ENTER] + > > IP > > G 10 > > > > My problem is when I come back from one of the > PROGxx.PROC's, I'm not > > getting the menu choice value back to execute the G 10 command. > > Instead it displays the error message at the bottom. The > PROGxx.PROC > > is structured like this: > > > > PQ > > 10 C Top of this PROC > > Ha number of things stuffed into the output buffer P Hmore things > > happen in the output buffer P RTN P > > 999 C should never get past this point OI never see this message X > > > > Now keep in mind that I've trimmed down the PROC's to keep this > > message fairly short. Everything is working as expected EXCEPT the > > falling through on the MAIN.MENU.PROC into the invalid menu > choice message. > > Anyone have any insight to my problem? > > > > TIA > > > > BobW > > --- > > u2-users mailing list > > u2-users@listserver.u2ug.org > > To unsubscribe please visit http://listserver.u2ug.org/ > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
As always, the top quality abilities of the folks on this list keep me in awe. My major flaw was in the assumption that PROC processing is like PROGRAM processing. I now know that there is only one set of buffers, period. Next were the good suggestions on how to properly accomplish what I was wanting. John's method, I think, is going to be easier to maintain down the road, especially since I'm only working with PROC's once in awhile. Thanks for your input, Glenn, as it cleared up a couple questions I had from reading the documentation. I appreciate everyone else's input, too. You're a great bunch of folks! Thanks, BobW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 25, 2006 11:54 AM To: U2-Users List Subject: [U2] PROC question Hi folks, Maybe I'm just missing the finer points of PROC processing. I've got a MENU proc that's structured like this: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 [PROD.PL PROG1.PROC IF A = 1 G 10 ... IF A = 99 [PROD.PL PROG99.PROC IF A = 99 G 10 O O That is not a valid menu choice. OPRESS [ENTER] + IP G 10 My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. Instead it displays the error message at the bottom. The PROGxx.PROC is structured like this: PQ 10 C Top of this PROC Ha number of things stuffed into the output buffer P Hmore things happen in the output buffer P RTN P 999 C should never get past this point OI never see this message X Now keep in mind that I've trimmed down the PROC's to keep this message fairly short. Everything is working as expected EXCEPT the falling through on the MAIN.MENU.PROC into the invalid menu choice message. Anyone have any insight to my problem? TIA BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC question
Bob Woodward wrote: Maybe I'm just missing the finer points of PROC processing. I've got a MENU proc that's structured like this: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 [PROD.PL PROG1.PROC IF A = 1 G 10 ... IF A = 99 [PROD.PL PROG99.PROC IF A = 99 G 10 O O That is not a valid menu choice. OPRESS [ENTER] + IP G 10 My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. Instead it displays the error message at the bottom. As others have pointed out, the problem is likely that your input buffer is getting cleared. One easy way around this is to change the structure of your menu proc so you don't have to worry about the input buffer after the call to the program proc is made. All of our menu procs have this basic structure: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 GO 100 IF A = 2 GO 200 IF A = 3 GO 300 GO 10 100 [PROGRAM PROC GO 10 200 [PROGRAM PROC GO 10 300 [PROGRAM PROC GO 10 We have a proc like this named BLANK.MENU that we just copy and modify anytime we need a new one. -John -- John Hester System & Network Administrator Momentum Group Inc. (949) 833-8886 x623 http://memosamples.com --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
[EMAIL PROTECTED] wrote on 01/25/2006 04:10:18 PM:
> 2) Are any of the PROGxx.PROC doing an RI? This will clear the input
> buffer.
Doesn't matter. The simple fact of using '[' to initiate the subroutine
PROC
was enough to cause the automatic clearing of the buffers.
And using '(' will cause the reuse of the current buffers as they were, so
if
the subroutine PROC accepts input or uses the H and P commands, the
current
buffers also get changed.
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC question
Bob, If A1 gets overwritten in PROD.PL PROG1.PROC, then it won't be 1 when you come back to the menu proc. Are you being careful to preserve the value in A1 when you are in the called proc? Susan M. Lynch F.W. Davison & Company, Inc. (781) 340-9255Support fax # (508) 437-0093 Confidentiality Notice: This e-mail message and any accompanying documents is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure, distribution, or copying is prohibited. - Original Message - From: "Bob Woodward" <[EMAIL PROTECTED]> To: "U2-Users List" Sent: Wednesday, January 25, 2006 2:54 PM Subject: [U2] PROC question > Hi folks, > > Maybe I'm just missing the finer points of PROC processing. I've got a > MENU proc that's structured like this: > > PQ > 10 C Top of Main Menu > OA number of lines that display the available menu choices > ... > OEnter choice + > IP: > IF # A X > IF A = 1 [PROD.PL PROG1.PROC > IF A = 1 G 10 > ... > IF A = 99 [PROD.PL PROG99.PROC > IF A = 99 G 10 > O > O That is not a valid menu choice. > OPRESS [ENTER] + > IP > G 10 > > My problem is when I come back from one of the PROGxx.PROC's, I'm not > getting the menu choice value back to execute the G 10 command. Instead > it displays the error message at the bottom. The PROGxx.PROC is > structured like this: > > PQ > 10 C Top of this PROC > Ha number of things stuffed into the output buffer > P > Hmore things happen in the output buffer > P > RTN > P > 999 C should never get past this point > OI never see this message > X > > Now keep in mind that I've trimmed down the PROC's to keep this message > fairly short. Everything is working as expected EXCEPT the falling > through on the MAIN.MENU.PROC into the invalid menu choice message. > Anyone have any insight to my problem? > > TIA > > BobW > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
Two thoughts, 1) Change the "IF A =" to "IF A1 =", i.e. specify the input buffer. 2) Are any of the PROGxx.PROC doing an RI? This will clear the input buffer. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 25, 2006 12:54 PM To: U2-Users List Subject: [U2] PROC question Hi folks, Maybe I'm just missing the finer points of PROC processing. I've got a MENU proc that's structured like this: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 [PROD.PL PROG1.PROC IF A = 1 G 10 ... IF A = 99 [PROD.PL PROG99.PROC IF A = 99 G 10 O O That is not a valid menu choice. OPRESS [ENTER] + IP G 10 My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. Instead it displays the error message at the bottom. The PROGxx.PROC is structured like this: PQ 10 C Top of this PROC Ha number of things stuffed into the output buffer P Hmore things happen in the output buffer P RTN P 999 C should never get past this point OI never see this message X Now keep in mind that I've trimmed down the PROC's to keep this message fairly short. Everything is working as expected EXCEPT the falling through on the MAIN.MENU.PROC into the invalid menu choice message. Anyone have any insight to my problem? TIA BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC question
If this is for universe, the problem here stems from the fact that your [PROD.xx procs are stomping all over the buffers of the main menu proc. There's not really much you can do about that, but you could modify your main proc slightly as follows: 0001: PQ 002 F-OPEN 1 VOC 003 XNO VOC 004 10 C TOP 005 OEnter choice+ 006 S1 007 IP: 008 IF # A X 009 MV &1.1 %1 010 IF A = 1 [VOC YYY 011 IF &1.1 = 1 GO 10 012 IF A = 99 [VOC ZZZ 013 IF &1.1 = 99 GO 10 014 O 015 O 016 ONOT VALID. PRESS ENTER+ 017 IP: 018 GO 10 In order to save your entry, you can't use input, output or select list buffers - you are then left with using a file channel (since you probably don't want to write anything here). So at line 2 and 3, open the VOC file to channel 1 and use that as a holder. Line 7 is used to make certain input is always done on the first field. Line 9 then is used to transfer your users input value into the first field of the file channel - you then use the file channel as your test to return to the menu (lines 11 and 13). This means you should only have to modify slightly your main menu program to retain the input value and not have to modify the PROCxx files. _ "I reject your reality and substitute my own" - Adam Savage Glenn M. Herbert - Connectivity Development Engineer Information Integration Solutions, IBM Software Group 50 Washington Street Westboro, MA 01581 508-599-7281 direct [EMAIL PROTECTED] wrote on 01/25/2006 02:54:05 PM: > Hi folks, > > Maybe I'm just missing the finer points of PROC processing. I've got a > MENU proc that's structured like this: > > PQ > 10 C Top of Main Menu > OA number of lines that display the available menu choices > ... > OEnter choice + > IP: > IF # A X > IF A = 1 [PROD.PL PROG1.PROC > IF A = 1 G 10 > ... > IF A = 99 [PROD.PL PROG99.PROC > IF A = 99 G 10 > O > O That is not a valid menu choice. > OPRESS [ENTER] + > IP > G 10 > > My problem is when I come back from one of the PROGxx.PROC's, I'm not > getting the menu choice value back to execute the G 10 command. Instead > it displays the error message at the bottom. The PROGxx.PROC is > structured like this: > > PQ > 10 C Top of this PROC > Ha number of things stuffed into the output buffer > P > Hmore things happen in the output buffer > P > RTN > P > 999 C should never get past this point > OI never see this message > X > > Now keep in mind that I've trimmed down the PROC's to keep this message > fairly short. Everything is working as expected EXCEPT the falling > through on the MAIN.MENU.PROC into the invalid menu choice message. > Anyone have any insight to my problem? > > TIA > > BobW > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC question
Something in the far reaches of my mind tells me that you need to do something like use a left paren instead of a bracket, like IF A = 1 (PROD.PL PROG1.PROC Can't try it right now to verify, though, sorry! -Dianne Bob Woodward wrote: Hi folks, Maybe I'm just missing the finer points of PROC processing. I've got a MENU proc that's structured like this: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 [PROD.PL PROG1.PROC IF A = 1 G 10 ... IF A = 99 [PROD.PL PROG99.PROC IF A = 99 G 10 O O That is not a valid menu choice. OPRESS [ENTER] + IP G 10 My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. Instead it displays the error message at the bottom. The PROGxx.PROC is structured like this: PQ 10 C Top of this PROC Ha number of things stuffed into the output buffer P Hmore things happen in the output buffer P RTN P 999 C should never get past this point OI never see this message X Now keep in mind that I've trimmed down the PROC's to keep this message fairly short. Everything is working as expected EXCEPT the falling through on the MAIN.MENU.PROC into the invalid menu choice message. Anyone have any insight to my problem? TIA BobW --- --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
Bob, Does the called PROC have an "RI" in it by any chance? That would clear the input buffers and leave nothing for the original PROC to use in the "IF A" statement. --Ron P. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 25, 2006 1:54 PM To: U2-Users List Subject: [U2] PROC question Hi folks, My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC question
Bob, This is from memory, so I trust someone will affirm/correct my prognosis, but isn't the PIB (primary input buffer) cleared when you execute the program. So when you return, A (or answer, A1 assumed) is now null? -Baker >My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice >value back to execute the G 10 command. Instead it displays the error message at the bottom. --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
[U2] PROC question
Hi folks, Maybe I'm just missing the finer points of PROC processing. I've got a MENU proc that's structured like this: PQ 10 C Top of Main Menu OA number of lines that display the available menu choices ... OEnter choice + IP: IF # A X IF A = 1 [PROD.PL PROG1.PROC IF A = 1 G 10 ... IF A = 99 [PROD.PL PROG99.PROC IF A = 99 G 10 O O That is not a valid menu choice. OPRESS [ENTER] + IP G 10 My problem is when I come back from one of the PROGxx.PROC's, I'm not getting the menu choice value back to execute the G 10 command. Instead it displays the error message at the bottom. The PROGxx.PROC is structured like this: PQ 10 C Top of this PROC Ha number of things stuffed into the output buffer P Hmore things happen in the output buffer P RTN P 999 C should never get past this point OI never see this message X Now keep in mind that I've trimmed down the PROC's to keep this message fairly short. Everything is working as expected EXCEPT the falling through on the MAIN.MENU.PROC into the invalid menu choice message. Anyone have any insight to my problem? TIA BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Hi Tony. It looks like this is a no-go in UV, too. I ended up using the branching method many have suggested. Thanks. BobW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tony Gravagno Sent: Thursday, January 12, 2006 8:26 AM To: u2-users@listserver.u2ug.org Subject: RE: [U2] PROC Question Bob Woodward wrote: > What I want to be able to do is: >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 In RPL the subvalue mark is used to accomplish this: IF A = 5 [USER.PL BASIC.PGM1]\[USER.PL BASIC.PGM2]\G 10 Use ctrl-\ for the subvalue mark. I'm positive that we can do GS 10\GS 20 in RPL, not positive that works in Proc/PQN. Even if that does work, I'm not positive the stack will be maintained in RPL or PQN after a call to an external subroutine - been a long time. Try it and let us know. Personally I prefer to branch down to code blocks as others suggest. HTH Tony, Nebula R&D (RPL is owned and maintained by the Realtime Software Corporation and is only available for D3.) --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Bob Woodward wrote: > What I want to be able to do is: >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 In RPL the subvalue mark is used to accomplish this: IF A = 5 [USER.PL BASIC.PGM1]\[USER.PL BASIC.PGM2]\G 10 Use ctrl-\ for the subvalue mark. I'm positive that we can do GS 10\GS 20 in RPL, not positive that works in Proc/PQN. Even if that does work, I'm not positive the stack will be maintained in RPL or PQN after a call to an external subroutine - been a long time. Try it and let us know. Personally I prefer to branch down to code blocks as others suggest. HTH Tony, Nebula R&D (RPL is owned and maintained by the Realtime Software Corporation and is only available for D3.) --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC Question
One final oft-seen PROC thing. You can have a PROC that has statement labels within have those statement sections referenced individually from the outside. Example PROX AAA PQN 100 T "HERE AT 100" X 200 T "HERE AT 200" X 300 T "HERE AT 300" X and have calling PROCS likewise: [PROX AAA] 100 (some other proc statements) [PROX AAA] 200 (some other proc statements [PROC AAA] 300 So it's like haveing a library of SUBs in one place. My 1 cent. Mark Johnson - Original Message - From: "Bob Woodward" <[EMAIL PROTECTED]> To: Sent: Wednesday, January 11, 2006 2:50 PM Subject: RE: [U2] PROC Question > Thanks, everyone. I got exactly the answer I was afraid I would get. > Yes, my mind is fried... > > Because of system programming standards, I need to stay with a PROC but > I was hoping to be able to streamline them a little bit. > > I appreciate the answers everyone offered, including the ones to quit > using PROC's (and the thought has crossed my mind a number of times) but > for the most part, we keep the PROC's pretty simple. > > Again, thanks. > > BobW > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward > Sent: Wednesday, January 11, 2006 9:35 AM > To: U2-Users List > Subject: [U2] PROC Question > > Hi folks, > > I can't find anything in the IBM Doc's for ProVerb's that tells me how > to create an entry that will allow me to put multiple commands on a > single line. In a nutshell, from a "menu" when a user selects an > option, I want to be able to execute multiple commands. > > Currently, I use multiple lines such as: >IF A = 5 [USER.PL BASIC.PGM1 >IF A = 5 [USER.PL BASIC.PGM2 >IF A = 5 G 10 > > What I want to be able to do is: >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 > > Is my mind fried? Maybe... But is there something that will work? > > BobW > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC Question
Microdata allows multiple lines on PROCS, and I used to be very good at PQN procs but I don't recall the syntax. I would stay with the offered suggestions. My 1 cent - Original Message - From: "Bill Haskett" <[EMAIL PROTECTED]> To: Sent: Wednesday, January 11, 2006 1:35 PM Subject: RE: [U2] PROC Question > Bob: > > I used to be pretty proficient in PROC and have never heard of this...but > that doesn't mean it doesn't exist. :-) > > Bill > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward > > Sent: Wednesday, January 11, 2006 9:35 AM > > To: U2-Users List > > Subject: [U2] PROC Question > > > > Hi folks, > > > > I can't find anything in the IBM Doc's for ProVerb's that > > tells me how to create an entry that will allow me to put > > multiple commands on a single line. In a nutshell, from a > > "menu" when a user selects an option, I want to be able to > > execute multiple commands. > > > > Currently, I use multiple lines such as: > >IF A = 5 [USER.PL BASIC.PGM1 > >IF A = 5 [USER.PL BASIC.PGM2 > >IF A = 5 G 10 > > > > What I want to be able to do is: > >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 > > > > Is my mind fried? Maybe... But is there something that will work? > > > > BobW > > --- > > u2-users mailing list > > u2-users@listserver.u2ug.org > > To unsubscribe please visit http://listserver.u2ug.org/ > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Goo'day, Jay Jay and . At 22:29 11/01/06 +, you wrote: It's been a LONG time ... I can remember writing a whole PL suite in MDIS PROC (don't ask...) I recall that in PQN procs you could have a construct such as PQN M RI IP: IF %1 = 1]2]3]4]5 G 10]20]30]40]50 That's the MDIS (MDD) method of multivaluing the input and associated actions, but the OP wanted to have one input and multiple actions, IIRC, so this isn't what was asked AFAIK with UV (we'd changed all of our MDD PQN PROCS on converting ot R83 PQs), you'd have to go to an internal subroutine ([]) and call each action in turn, and return as has already been suggested, or amend your "actions" programs to CHAIN from one to anotherwhich probably wouldn't be very clever T "Bad entry G B 10 XTEN 20 XTWENTY 30 XTHIRTY 40 XFORTY 50 XFIFTY Etc - or whatever (]=value marks by the way) Otherwise PQN IF %1 # 5 G F [USER.PL BASIC.PGM1] [USER.PL BASIC.PGM2] etc M BTW - I don't really like "G F" and "G B" - much prefer labels I haven't tried this on UniVerse but I hope this helps.. Regards JayJay -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: 11 January 2006 17:35 To: U2-Users List Subject: [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.1.371 / Virus Database: 267.14.17/227 - Release Date: 11/01/06 Regards, Bruce Nichol Talon Computer Services ALBURYNSW 2640 Australia http://www.taloncs.com.au Tel: +61 (0)411149636 Fax: +61 (0)260232119 If it ain't broke, fix it till it is! -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.1.371 / Virus Database: 267.14.17/227 - Release Date: 11/01/06 --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
It's been a LONG time ... I can remember writing a whole PL suite in MDIS PROC (don't ask...) I recall that in PQN procs you could have a construct such as PQN M RI IP: IF %1 = 1]2]3]4]5 G 10]20]30]40]50 T "Bad entry G B 10 XTEN 20 XTWENTY 30 XTHIRTY 40 XFORTY 50 XFIFTY Etc - or whatever (]=value marks by the way) Otherwise PQN IF %1 # 5 G F [USER.PL BASIC.PGM1] [USER.PL BASIC.PGM2] etc M BTW - I don't really like "G F" and "G B" - much prefer labels I haven't tried this on UniVerse but I hope this helps.. Regards JayJay -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: 11 January 2006 17:35 To: U2-Users List Subject: [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Thanks, everyone. I got exactly the answer I was afraid I would get. Yes, my mind is fried... Because of system programming standards, I need to stay with a PROC but I was hoping to be able to streamline them a little bit. I appreciate the answers everyone offered, including the ones to quit using PROC's (and the thought has crossed my mind a number of times) but for the most part, we keep the PROC's pretty simple. Again, thanks. BobW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 11, 2006 9:35 AM To: U2-Users List Subject: [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Wouldn't you rather just rewrite the proc in basic? > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward > Sent: Wednesday, January 11, 2006 12:35 PM > To: U2-Users List > Subject: [U2] PROC Question > > > Hi folks, > > I can't find anything in the IBM Doc's for ProVerb's that > tells me how to create an entry that will allow me to put > multiple commands on a single line. In a nutshell, from a > "menu" when a user selects an option, I want to be able to > execute multiple commands. > > Currently, I use multiple lines such as: >IF A = 5 [USER.PL BASIC.PGM1 >IF A = 5 [USER.PL BASIC.PGM2 >IF A = 5 G 10 > > What I want to be able to do is: >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 > > Is my mind fried? Maybe... But is there something that will work? > > BobW > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
The only sensible ways are:
1. Subroutines
GOSUB n
n MV #1 "blah"
P
..
RSUB
2. Ext subroutines
C has commands
[file someproc]
3. Execute something sensible like a paragraph and give up using ugly PROCs
Brian "Like PROC - ugly but works"
-Original Message-
From: "Bob Woodward"<[EMAIL PROTECTED]>
Sent: 11/01/06 17:34:49
To: "U2-Users List"
Subject: [U2] PROC Question
Hi folks,
I can't find anything in the IBM Doc's for ProVerb's that tells me how
to create an entry that will allow me to put multiple commands on a
single line. In a nutshell, from a "menu" when a user selects an
option, I want to be able to execute multiple commands.
Currently, I use multiple lines such as:
IF A = 5 [USER.PL BASIC.PGM1
IF A = 5 [USER.PL BASIC.PGM2
IF A = 5 G 10
What I want to be able to do is:
IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10
Is my mind fried? Maybe... But is there something that will work?
BobW
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
[Message truncated. Tap Edit->Mark for Download to get remaining portion.]
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Bob: I used to be pretty proficient in PROC and have never heard of this...but that doesn't mean it doesn't exist. :-) Bill > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward > Sent: Wednesday, January 11, 2006 9:35 AM > To: U2-Users List > Subject: [U2] PROC Question > > Hi folks, > > I can't find anything in the IBM Doc's for ProVerb's that > tells me how to create an entry that will allow me to put > multiple commands on a single line. In a nutshell, from a > "menu" when a user selects an option, I want to be able to > execute multiple commands. > > Currently, I use multiple lines such as: >IF A = 5 [USER.PL BASIC.PGM1 >IF A = 5 [USER.PL BASIC.PGM2 >IF A = 5 G 10 > > What I want to be able to do is: >IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 > > Is my mind fried? Maybe... But is there something that will work? > > BobW > --- > u2-users mailing list > u2-users@listserver.u2ug.org > To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Why not form GO TO blocks? Example: 5 C Print Menu T C O MENU 10 C Input Menu Option IP IF A = 1 GO 100 IF A = 2 GO 200 IF A = 3 GO 300 GO 10 100 C First menu Option HRUN USER.PL BASIC.PGM1 P HRUN USER.PL BASIC.PGM2 P GO 5 200 C Second Menu Option HRUN USER.PL BASIC.PGM4 P HRUN USER.PL BASIC.PGM2 P GO 5 300 C Command Command Command GO 5 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 11, 2006 9:35 AM To: U2-Users List Subject: [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
RE: [U2] PROC Question
Maybe something like this? IF A = 5 G 500 ... 500 C [USER.PL BASIC1 [USER.PL BASIC2 G 10 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Woodward Sent: Wednesday, January 11, 2006 10:35 AM To: U2-Users List Subject: [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
Re: [U2] PROC Question
That type of functionality is not possible (unless PROC has been modified since I worked in it) - that's the reason you can't find anything in the documentation. You have a choice of doing it the way you are, or using GOSUB/GOTO to define the multiple lines as a "subroutine". _ "I reject your reality and substitute my own" - Adam Savage Glenn M. Herbert - Connectivity Development Engineer Information Integration Solutions, IBM Software Group 50 Washington Street Westboro, MA 01581 508-599-7281 direct "Bob Woodward" <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 01/11/2006 12:34 PM Please respond to u2-users To "U2-Users List" cc Subject [U2] PROC Question Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/ --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
[U2] PROC Question
Hi folks, I can't find anything in the IBM Doc's for ProVerb's that tells me how to create an entry that will allow me to put multiple commands on a single line. In a nutshell, from a "menu" when a user selects an option, I want to be able to execute multiple commands. Currently, I use multiple lines such as: IF A = 5 [USER.PL BASIC.PGM1 IF A = 5 [USER.PL BASIC.PGM2 IF A = 5 G 10 What I want to be able to do is: IF A = 5 [USER.PL BASIC.PGM1];[USER.PL BASIC.PGM2];G 10 Is my mind fried? Maybe... But is there something that will work? BobW --- u2-users mailing list u2-users@listserver.u2ug.org To unsubscribe please visit http://listserver.u2ug.org/
