Re: [Ubnt_users] Problems on 5.6.9?

[Ty Featherling via Ubnt_users]

Is the radio with the transmit rate crashing a Powerbeam? We see this on
PB's with marginal signals where we don't with NanoBridges. Firmware,
alternative modulation, etc doesn't help. Get the signal higher at the
sector or switch to a NanoBridge if possible.




-Ty

On Mon, Sep 5, 2016 at 9:42 PM, alex phillips 
wrote:

> Try alternative modulation on the client.  That may help with the low link
> rate.
>
> On Sep 5, 2016 9:44 PM, "Chris Fabien"  wrote:
>
>> I have a tower I have been struggling with lately, I just split it up
>> from a 2.4 dual pol omni to titanium sectors with new Rocket M2s, and also
>> upgraded to the 5.6.9 firmware since the newer radios were coming with a
>> mix of recent firmware. Stations are a mix of every ubnt M2 radio, we have
>> been upgrading weaker stations to Powerbeam M2s.
>>
>> I have several strange issues:
>>
>> 1. Have one customer with a decent signal that seems to get "stuck" at a
>> 3.25 TX rate, and raido is pretty much unreachable. This is an intermittent
>> problem, when it occurs the other stations, including ones with a similar
>> TX signal to the AP are not affected.
>>
>> 2. Have seen on several occasions, it looks like all the stations on an
>> AP drop and reconnect at the same time. I log in to the AP and see all
>> stations with the same connection time, usually a few hours ago.
>>
>> 3. One of the APs seems to reboot itself periodically, several times per
>> day.
>>
>> Anyone seen stuff like this before? I have extensive experience with 5.5
>> firmware on ubnt M2 radios, this just seems strange.
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?

[Ty Featherling]

Same here. Either all stations are dropped until reboot or all RX rates
crash to 6.5 until the station is kicked or AP is rebooted. Maddening. I
have them all stable but it took different FW combinations each time.

-Ty



-Ty

On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists 
wrote:

> Same here.  I show that the STA's are connected, but no data passing nor
> can I get in the STA's GUI.  This was a major issue a month or so ago for
> me but it's been quiet with no recent issues once I moved the
> offending AP's to non-DFS bands.
>
> JJ
>
> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway 
> wrote:
>
>> We haven’t nailed it down to DFS but yes and it’s very random.
>>
>>
>>
>> Rory
>>
>>
>>
>> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
>> *On Behalf Of *Darin Steffl
>> *Sent:* Thursday, June 23, 2016 9:16 AM
>> *To:* Ubiquiti Users Group
>> *Subject:* Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
>>
>>
>>
>> We see that happen until the AP is rebooted but only if running a dfs
>> channel. Any other time it never happens.
>>
>> Sent from my smartphone. Please excuse any typos.
>>
>> On Jun 23, 2016 11:03 AM,  wrote:
>>
>> Having that problem too...
>>
>>
>> On Jun 23, 2016, at 08:59, Adair Winter 
>> wrote:
>>
>> We keep having problems with the station showing their connected but no
>> data is moving
>>
>> On Jun 23, 2016 10:57 AM,  wrote:
>>
>> Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs
>> and then when you reboot the AP, they come back?
>>
>> Thanks,
>> Mike
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] Station connected and working but management UI won't respond

[Ty Featherling]

I have seen this many times but I am wondering if anyone knows the cause or
a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel
width. Before I do so I am making sure I can reach all associated radios so
that I can migrate them as well of course. I have 2 different customers on
this AP that are connected and online but the radio just will not respond
via the web interface. One of them will respond via SSH but the other
won't. I tried the reboot command on the one that did respond but any
command I try to run just stalls the session. I call the two customers and
of course neither is around to power cycle the units. Is there a known
cause for this or a way to snap them out of their daze remotely?

-Ty
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Station connected and working but management UI won't respond

[Ty Featherling]

Yes I am running WDS everywhere Adair.

-Ty

On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net
wrote:

 Are you running WDS on both sides?

 On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com
 wrote:

 I have seen this many times but I am wondering if anyone knows the cause
 or a remote solution. I am going to migrate an AP from 10mhz to 20mhz
 channel width. Before I do so I am making sure I can reach all associated
 radios so that I can migrate them as well of course. I have 2 different
 customers on this AP that are connected and online but the radio just will
 not respond via the web interface. One of them will respond via SSH but the
 other won't. I tried the reboot command on the one that did respond but any
 command I try to run just stalls the session. I call the two customers and
 of course neither is around to power cycle the units. Is there a known
 cause for this or a way to snap them out of their daze remotely?

 -Ty

 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users




 --

 Adair Winter
 VP, Network Operations / Owner
 Amarillo Wireless | 806.316.5071
 C: 806.231.7180
 http://www.amarillowireless.net


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Station connected and working but management UI won't respond

[Ty Featherling]

I will try. I tried SSH from the tower router. No dice.

-Ty

On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz
wrote:

 Try SSH into the AP, then SSH into the Station. Might have to ping it from
 the AP first.







 *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
 *On Behalf Of *Ty Featherling
 *Sent:* Friday, January 09, 2015 9:43 AM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Station connected and working but management
 UI won't respond



 Yes I am running WDS everywhere Adair.



 -Ty



 On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net
 wrote:

 Are you running WDS on both sides?



 On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com
 wrote:

 I have seen this many times but I am wondering if anyone knows the cause
 or a remote solution. I am going to migrate an AP from 10mhz to 20mhz
 channel width. Before I do so I am making sure I can reach all associated
 radios so that I can migrate them as well of course. I have 2 different
 customers on this AP that are connected and online but the radio just will
 not respond via the web interface. One of them will respond via SSH but the
 other won't. I tried the reboot command on the one that did respond but any
 command I try to run just stalls the session. I call the two customers and
 of course neither is around to power cycle the units. Is there a known
 cause for this or a way to snap them out of their daze remotely?



 -Ty


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users





 --

 Adair Winter
 VP, Network Operations / Owner
 Amarillo Wireless | 806.316.5071
 C: 806.231.7180
 http://www.amarillowireless.net




 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Station connected and working but management UI won't respond

[Ty Featherling]

SSH didn't work from the AP to the one that doesn't respond to SSH anyway.
It did from the other but same problem, reboot command does nothing. It IS
just radio# reboot right? Ping command from affected radio works fine.

-Ty

On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com
wrote:

 I will try. I tried SSH from the tower router. No dice.

 -Ty

 On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz
 wrote:

 Try SSH into the AP, then SSH into the Station. Might have to ping it
 from the AP first.







 *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
 *On Behalf Of *Ty Featherling
 *Sent:* Friday, January 09, 2015 9:43 AM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Station connected and working but management
 UI won't respond



 Yes I am running WDS everywhere Adair.



 -Ty



 On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter 
 ada...@amarillowireless.net wrote:

 Are you running WDS on both sides?



 On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com
 wrote:

 I have seen this many times but I am wondering if anyone knows the cause
 or a remote solution. I am going to migrate an AP from 10mhz to 20mhz
 channel width. Before I do so I am making sure I can reach all associated
 radios so that I can migrate them as well of course. I have 2 different
 customers on this AP that are connected and online but the radio just will
 not respond via the web interface. One of them will respond via SSH but the
 other won't. I tried the reboot command on the one that did respond but any
 command I try to run just stalls the session. I call the two customers and
 of course neither is around to power cycle the units. Is there a known
 cause for this or a way to snap them out of their daze remotely?



 -Ty


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users





 --

 Adair Winter
 VP, Network Operations / Owner
 Amarillo Wireless | 806.316.5071
 C: 806.231.7180
 http://www.amarillowireless.net




 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] Rocket AC PTP throughput chart?

[Ty Featherling]

Is there such a thing? I'm trying to estimate what is possible for a link I
am about to set up. I know this product isn't available in in the online
link planner. A link-planner like the one AF5 has would be super helpful
here.

-Ty
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Rocket5ac PTMP w/AirPrism availability

[Ty Featherling]

Let me know when you get them Tom, I may just take them off your hands.

-Ty

On Thu, Jan 8, 2015 at 12:00 PM, Tom Fadgen tfad...@coastinet.com wrote:

  I guess I f. up with my assumption since I just ordered PTP that I
 do not need. I guess I have to remember my old motto from the early '80's,
 Trail Blazers sometimes get arrows in their backs or bleeding edge
 technology is called BLEEDING for a reason

 Tom Fadgen
 coastinet.com

 On Thursday 08/01/2015 at 8:55 am, Ben Moore wrote:

 The PTP version will always be just PTP (at least as it currently
 stands).  They have different hardware than the PTMP version (not yet
 announced).  We are planning to start shipping PTMP AirPrism version this
 month to distributors.

 Thanks,
 Ben

 On Thu, Jan 8, 2015 at 9:52 AM, Tom Fadgen tfad...@coastinet.com wrote:

 I am hoping just like the non-prizm 5ac-lite's which originally came out
 as PTP only, a firmware release will open up PTMP.

 Tom Fadgen
 coastinet.com

 On Thursday 08/01/2015 at 7:52 am, Jeremy Grip wrote:

 Not seeing this available yet from the usual suspects. Can we assume the
 price will look like the PTP version?





 Jeremy Grip
 North Branch Networks,LLC


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Rocket ACs

[Ty Featherling]

I have 8 on a shelf that I haven't even booted yet. I was waiting based on
some bad feedback early on. What did they announce today?

-Ty

On Tue, Dec 9, 2014 at 1:07 PM, Mike Hammett wispaubntus...@ics-il.net
wrote:

 For those of you that have them...  are they working well?

 Was there anything new in their announcement today? It didn't seem like it.



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

 https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Rocket ACs

[Ty Featherling]

I hope so. I just checked and all 8 I have on the shelf are older than that!

-Ty

On Tue, Dec 9, 2014 at 2:06 PM, Paul McNary pmcn...@cameron.net wrote:

  Will they RMA the older version?



 On 12/9/2014 2:01 PM, Mathew Howard wrote:

  Check the date code (the five characters printed on the label before the
 MAC), I think 1431G or newer will work... I verified it does work on 1431G,
 anyway.

 If I understand correctly, the older Rockets will not support airview due
 to hardware changes.

  --
 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Adair Winter [ada...@amarillowireless.net]
 *Sent:* Tuesday, December 09, 2014 1:57 PM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs

  So I bought some early rocket AC's to test with and never got them
 deployed due to the lack of airview. now I'm reading that my rockets might
 not support it at all due to a hardware change? or was it just
 software??... How can I verify this for sure? is there a particular series
 or something? Or do I just need to fire them up and see?

 On Tue, Dec 9, 2014 at 1:45 PM, Mathew Howard mat...@litewire.net wrote:

  Yes, the spectrum analyzer is quite nice... even if the only Rocket I
 have that it works on is sitting on my desk. :p

 So is the only difference with this new Rocket AirPrism, or are there
 other  changes as well?
  --
 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Ben Moore [ben.mo...@ubnt.com]
 *Sent:* Tuesday, December 09, 2014 1:27 PM

 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs

   ;-)  I think you guys will really like the new SW tools being added
 (especially the persistent spectrum analyzer...lots that can be done with
 that).  Will send out some details shortly on PTMP networks in the wild ;)

 On Tue, Dec 9, 2014 at 12:24 PM, Mathew Howard mat...@litewire.net
 wrote:

  ha... I just Rocket and PowerBeam and assumed they were the same ones.
 I guess I should actually read stuff. This is what happens when you don't
 make new stuff look different :p
  --
 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Mike Hammett [wispaubntus...@ics-il.net]
 *Sent:* Tuesday, December 09, 2014 1:22 PM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs

Oh, so the non-Lite Rocket. Sorry.

 The e-mail didn't really make it clear that there were new things, just
 the same platform hype we had 14 months ago. I didn't read it all, just
 skimmed it because it didn't look any different.

 Ohhh, so the PtMP works now with the new software?



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

  https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL

  --
  *From: *Ben Moore ben.mo...@ubnt.com
 *To: *Ubiquiti Users Group ubnt_users@wispa.org
 *Sent: *Tuesday, December 9, 2014 1:20:19 PM
 *Subject: *Re: [Ubnt_users] Rocket ACs

 The 3 new products announced today:

  R5AC-PTP - Rocket w/AirPrism, PTP only
 NBE-5AC-19 - 19dB NanoBeam
 PBE-5AC-620 - 620mm PowerBeam

  Also, all of the software updates:

  http://www.ubnt.com/broadband/software/

  Some highlights:

  - Dedicated spectrum analysis (persistent)
 - CINR (Carrier to Interference and Noise Ratio - accurate assessment of
 channel conditions
 - New diagnostic tools (Ethernet Cabling test, RF Diagnostics, etc...)
 - PTMP enabled on R5AC-LITE

  The R5AC-PTMP (AirPrism AP) will be announced shortly.

  Thanks,
 Ben

 On Tue, Dec 9, 2014 at 12:11 PM, Mathew Howard mat...@litewire.net
 wrote:

   We have a couple of links up... I haven't really seen any problems
 with them.

 I think the NanoBeam AC might be new... at least I hadn't seen it
 before, but otherwise, no, nothing new.

  --
 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Mike Hammett [wispaubntus...@ics-il.net]
 *Sent:* Tuesday, December 09, 2014 1:07 PM
 *To:* Ubiquiti Users Group
 *Subject:* [Ubnt_users] Rocket ACs

For those of you that have them...  are they working well?

 Was there anything new in their announcement today? It didn't seem like
 it.



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

  https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


 

Re: [Ubnt_users] Rocket ACs

[Ty Featherling]

I remember there being a 6.x beta line for a while. Or maybe I'm thinking
of the 5.6 versions.

-Ty
On Dec 9, 2014 2:45 PM, Mike Hammett wispaubntus...@ics-il.net wrote:

 They have internal betas?  :-p



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

 https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL

 --
 *From: *Josh Luthman j...@imaginenetworksllc.com
 *To: *Ubiquiti Users Group ubnt_users@wispa.org
 *Sent: *Tuesday, December 9, 2014 2:43:56 PM
 *Subject: *Re: [Ubnt_users] Rocket ACs

 Internal beta maybe?  Just speculating.

 Josh Luthman
 Office: 937-552-2340
 Direct: 937-552-2343
 1100 Wayne St
 Suite 1337
 Troy, OH 45373
 On Dec 9, 2014 3:38 PM, Mike Hammett wispaubntus...@ics-il.net wrote:

 I never saw any v6 to precede v7.



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

 https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL

 --
 *From: *Josh Luthman j...@imaginenetworksllc.com
 *To: *Ubiquiti Users Group ubnt_users@wispa.org
 *Sent: *Tuesday, December 9, 2014 2:37:26 PM
 *Subject: *Re: [Ubnt_users] Rocket ACs

 Or its like Linux where they alternate stable and beta.

 Josh Luthman
 Office: 937-552-2340
 Direct: 937-552-2343
 1100 Wayne St
 Suite 1337
 Troy, OH 45373
 On Dec 9, 2014 3:36 PM, Mike Hammett wispaubntus...@ics-il.net wrote:

 I'm guessing it'll be like M series vs. legacy. Eventually V6 will be
 the M-series connection to the AC.   I'm guessing...



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

 https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL

 --
 *From: *Steve Barnes st...@pcswin.com
 *To: *Ubiquiti Users Group ubnt_users@wispa.org
 *Sent: *Tuesday, December 9, 2014 2:16:24 PM
 *Subject: *Re: [Ubnt_users] Rocket ACs

  Ben, I asked before but haven’t gotten word, can you speak to the
 Backwards compatibility of the new units?



 *Steven Barnes*

 GM

 PCSWIN.com

 Howard LLC.



 *From:* ubnt_users-boun...@wispa.org [mailto:
 ubnt_users-boun...@wispa.org] *On Behalf Of *Ben Moore
 *Sent:* Tuesday, December 09, 2014 3:14 PM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs



 Yes, difference is airprism...and the fact that this one is PTP locked
 (the lite will do both PTMP and PTP).



 On Tue, Dec 9, 2014 at 12:45 PM, Mathew Howard mat...@litewire.net
 wrote:

   Yes, the spectrum analyzer is quite nice... even if the only Rocket I
 have that it works on is sitting on my desk. :p

 So is the only difference with this new Rocket AirPrism, or are there
 other  changes as well?
   --

 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Ben Moore [ben.mo...@ubnt.com]
 *Sent:* Tuesday, December 09, 2014 1:27 PM


 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs



 ;-)  I think you guys will really like the new SW tools being added
 (especially the persistent spectrum analyzer...lots that can be done with
 that).  Will send out some details shortly on PTMP networks in the wild ;)



 On Tue, Dec 9, 2014 at 12:24 PM, Mathew Howard mat...@litewire.net
 wrote:

   ha... I just Rocket and PowerBeam and assumed they were the same
 ones. I guess I should actually read stuff. This is what happens when you
 don't make new stuff look different :p
   --

 *From:* ubnt_users-boun...@wispa.org [ubnt_users-boun...@wispa.org] on
 behalf of Mike Hammett [wispaubntus...@ics-il.net]
 *Sent:* Tuesday, December 09, 2014 1:22 PM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket ACs

 Oh, so the non-Lite Rocket. Sorry.

 The e-mail didn't really make it clear that there were new things, just
 the same platform hype we had 14 months ago. I didn't read it all, just
 skimmed it because it didn't look any different.

 Ohhh, so the PtMP works now with the new software?



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com

  https://www.facebook.com/ICSIL
 https://plus.google.com/+IntelligentComputingSolutionsDeKalb
 https://www.linkedin.com/company/intelligent-computing-solutions
 https://twitter.com/ICSIL
  --

 *From: *Ben Moore ben.mo...@ubnt.com
 *To: *Ubiquiti Users Group ubnt_users@wispa.org
 *Sent: *Tuesday, December 9, 2014 1:20:19 PM
 *Subject: *Re: [Ubnt_users] Rocket ACs

 The 3 new products announced today:



 R5AC-PTP - Rocket w/AirPrism, PTP only

 NBE-5AC-19 - 19dB NanoBeam

 PBE-5AC-620 - 620mm PowerBeam



 Also, all of 

Re: [Ubnt_users] New airControl

[Ty Featherling]

You gave GOT to be shitting me!

-Ty

On Mon, Dec 1, 2014 at 3:11 PM, Adair Winter ada...@amarillowireless.net
wrote:

 Wha? Are you serious?
 On Dec 1, 2014 3:09 PM, Mike Hammett wispaubntus...@ics-il.net wrote:

 It's called airCRM. It does billing and control. It's only hosted in the
 cloud.

 How could UBNT go this long without a functional control platform only to
 fuck it up this badly?



 -
 Mike Hammett
 Intelligent Computing Solutions
 http://www.ics-il.com


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Rocket AC Multi Point

[Ty Featherling]

What, what?! Airview runs *without* breaking wireless connection? That is
great! Now I will go back into my hole until backwards compatibility with M
series radios is ready.

-Ty

On Thu, Nov 13, 2014 at 10:38 AM, Mike Dudgeon mike.dudg...@ubnt.com
wrote:

 I'm just going to leave this here (for those who haven't noticed)..


 http://community.ubnt.com/t5/airMAX-Beta-Blog/airOS-v7-1-Beta3-released/ba-p/1097483

 [image: Inline image 1]

 On Tue, Oct 28, 2014 at 1:47 AM, Blair Davis the...@wmwisp.net wrote:

  Thank you.

 I've had to move to channel filters on 24GHz to keep it workable.

 I'd love to see Air Beam in 2.4GHz as well.  That with AirPrizm could
 restore 2.4GHz to usability for others...

 --

 On 10/27/2014 9:23 PM, Ben Moore wrote:

 Met my quota for answers today :)

  Yes, this is also something we are looking to offer in 2.4ghz.  Similar
 to what we have in UAP-Outdoor+.

 Thanks,
 Ben

 On Oct 27, 2014, at 6:16 PM, Blair Davis the...@wmwisp.net wrote:

   Since you are talking, how about AirPrizm for 2.4GHz?

 --


 On 10/27/2014 6:40 PM, Ben Moore wrote:

 There are definitely more limitations with 2.4GHz...but there are some
 performance benefits you can get out of it still...

 On Mon, Oct 27, 2014 at 4:36 PM, Rory Conaway r...@triadwireless.net
 wrote:

  Your  answer posted at the same time.  Is my analysis correct?



 Rory



 *From:* ubnt_users-boun...@wispa.org [mailto:
 ubnt_users-boun...@wispa.org] *On Behalf Of *Ben Moore
 *Sent:* Monday, October 27, 2014 3:31 PM
 *To:* Ubiquiti Users Group
 *Subject:* Re: [Ubnt_users] Rocket AC Multi Point



 Nothing yet...But it is something we are working on.



 On Mon, Oct 27, 2014 at 4:23 PM, Phil Curnutt pcurn...@gmail.com
 wrote:

 How about 2.4 GHz in the ac?

 Phil



 On Mon, Oct 27, 2014 at 11:39 AM, Ben Moore ben.mo...@ubnt.com wrote:

 The R5AC-Lite (previously R5AC-PTP-Lite) will also support PTMP with
 software update.  There will then be additional hardware that will have
 airPrism built in.



 Will provide an update in next few days as to release timeframe.



 Thanks,

 Ben



 On Mon, Oct 27, 2014 at 11:32 AM, Steve Barnes st...@pcswin.com wrote:

   Alex I am not sure this is just going to be software only.  It
 thought it was a whole new Unit optimized for PtMP.



 *Steven Barnes*

 GM

 PCSWIN.com

 Howard LLC.



 *From:* ubnt_users-boun...@wispa.org [mailto:
 ubnt_users-boun...@wispa.org] *On Behalf Of *alex phillips
 *Sent:* Monday, October 27, 2014 1:26 PM
 *To:* Ubiquiti Users Group
 *Subject:* [Ubnt_users] Rocket AC Multi Point



 Anyone have any idea when the Multi Point Software will be available?






 --

 *Alex Phillips*
 CEO and General Manager
 RBNS.net
 HighSpeedLink.net

 *WISPA.org http://WISPA.org Board of Directors  (2011-2016)*

 *WISPA Vice President (2014-2015)*

 *FCC Committee Chairman*

 *540-908-3993 540-908-3993*



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users




 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users




 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users




 ___
 Ubnt_users mailing 
 listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users


 --
 West Michigan Wireless ISP
 Allegan, Michigan  49010269-686-8648

 A Division of:
 Camp Communication Services, INC

   ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users



 ___
 Ubnt_users mailing 
 listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users


 --
 West Michigan Wireless ISP
 Allegan, Michigan  49010269-686-8648

 A Division of:
 Camp Communication Services, INC


 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users




 --
 Mike Dudgeon
 Ubiquiti Networks, Inc. http://www.ubnt.com/
 http://www.ubnt.com/

 ___
 Ubnt_users mailing list
 Ubnt_users@wispa.org
 http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users