Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Nothing about the change log indicates any changes that would impact
lost stations.
Ubiquiti support is trying to say "upgrade and see if it works", but my
response to that is "tell me why I should expect it to work".
Is there any way to get real support from Ubiquiti, not people that
treat operators like idiots? email is fine.
I'd just like to be able to email with somebody that is going to read
the whole message and pay attention - seriously, these people will
respond and tell you to try something that you said you tried in the
email they are replying to!
On 7/5/2016 9:52 PM, Clay Stewart wrote:
On to 5.6.7 which says:
Version 5.6.7-Service release (July 1, 2016)
Regulatory updates:
- Improved DFS detection
Security:
- Security enhancemenets
New:
- Crash log reporting
On Tue, Jul 5, 2016 at 3:17 PM, Nick Bright <mailto:nick.bri...@valnet.net>> wrote:
I'm having a similar issue verified on three BulletM2HP units for
light duty sites (5-15 SMs).
Symptoms are that (with 5.6.6) almost all stations will
disassociate then re-associate at the same time. Sometimes it'll
just keep bouncing, sometimes it'll stabilize.
So far, going back to 5.6.4 has mitigated these symptoms. I have a
ticket open with Ubiquiti support, but they've been pretty useless
trying to figure out it.
General configuration is AP-WDS, AirMAX mode, 10MHz channel width,
and WPA2-AES encryption. I've verified it still happens without
encryption. I have not tried disabling WDS.
On 6/24/2016 11:03 AM, mike.l...@gmail.com
<mailto:mike.l...@gmail.com> wrote:
It doesn't :(
On Jun 24, 2016, at 08:00, Matt Hoppes
mailto:mattli...@rivervalleyinternet.net>> wrote:
Right but in my experience turning on WDS resolves this problem.
On Jun 24, 2016, at 10:45, Ken Patrick mailto:patr...@my9ja.com>> wrote:
The discussion is on 5.6.5 loosing connection like I stated a
few weeks back.not about wds.
On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes
mailto:mattli...@rivervalleyinternet.net>> wrote:
What? Turning on wds makes the Mac of the CPE properly visible.
> On Jun 24, 2016, at 09:54, Steve Barnes mailto:st...@pcswin.com>> wrote:
>
> Turning on WDS is not an answer to all the worlds woes.
WDS can cause issue if you are using MAC authentication
from the CPE. Since the maces the CPE MAC transparent.
>
> Steve Barnes
> Wireless Operations Manager
> PCSWIN.COM <http://PCSWIN.COM>
> NLBC.COM <http://NLBC.COM>
>
> -Original Message-
> From: ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] On Behalf Of Matt Hoppes
> Sent: Friday, June 24, 2016 8:55 AM
> To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until
reboot?
>
> Make sure WDS is enabled on every client and the AP.
>
>> On Jun 24, 2016, at 07:36, Jeff Evans
mailto:jev...@pennwisp.com>> wrote:
>>
>> We're seeing the same thing, not passing packets, but
everything else
>> looks normal.
>> A reboot of the AP cures it, but no way of knowing until
the customer calls.
>>
>> Jeff
>>
>> Quoting Kevin Sullivan mailto:kevin.sulli...@alyrica.net>>:
>>
>>> We're seeing something similar. All the stations show
associated at
>>> normal RSSI levels, but we lose 90% packets or more. A
reboot brings
>>> the users back online. Seeing the issue on 5.6.6 as
well as 6.0beta8
>>> (figured it was worth a try). The AP I'm looking at
that did this ten
>>> minutes ago is an XW.
>>>
>>>
>>>
>>> I'd roll back to 5.5.x, but can't because of the
vulnerability.
>>> Anyone know of a stable 5.6.x firmware that works on
DFS frequencies?
>>>
>>>
>>>
>>> Kevin
>>>
>>>
>>>
>>>
>>>
>>> From: ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
>>> [mailto:ubnt_use
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
On to 5.6.7 which says: Version 5.6.7-Service release (July 1, 2016) Regulatory updates: - Improved DFS detection Security: - Security enhancemenets New: - Crash log reporting On Tue, Jul 5, 2016 at 3:17 PM, Nick Bright wrote: > I'm having a similar issue verified on three BulletM2HP units for light > duty sites (5-15 SMs). > > Symptoms are that (with 5.6.6) almost all stations will disassociate then > re-associate at the same time. Sometimes it'll just keep bouncing, > sometimes it'll stabilize. > > So far, going back to 5.6.4 has mitigated these symptoms. I have a ticket > open with Ubiquiti support, but they've been pretty useless trying to > figure out it. > > General configuration is AP-WDS, AirMAX mode, 10MHz channel width, and > WPA2-AES encryption. I've verified it still happens without encryption. I > have not tried disabling WDS. > > > On 6/24/2016 11:03 AM, mike.l...@gmail.com wrote: > > It doesn't :( > > On Jun 24, 2016, at 08:00, Matt Hoppes < > mattli...@rivervalleyinternet.net> > wrote: > > Right but in my experience turning on WDS resolves this problem. > > On Jun 24, 2016, at 10:45, Ken Patrick < > patr...@my9ja.com> wrote: > > The discussion is on 5.6.5 loosing connection like I stated a few weeks > back.not about wds. > > On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes < > mattli...@rivervalleyinternet.net> wrote: > >> What? Turning on wds makes the Mac of the CPE properly visible. >> >> > On Jun 24, 2016, at 09:54, Steve Barnes < >> st...@pcswin.com> wrote: >> > >> > Turning on WDS is not an answer to all the worlds woes. WDS can cause >> issue if you are using MAC authentication from the CPE. Since the maces >> the CPE MAC transparent. >> > >> > Steve Barnes >> > Wireless Operations Manager >> > PCSWIN.COM >> > NLBC.COM >> > >> > -Original Message- >> > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> On Behalf Of Matt Hoppes >> > Sent: Friday, June 24, 2016 8:55 AM >> > To: Ubiquiti Users Group < ubnt_users@wispa.org> >> > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> > >> > Make sure WDS is enabled on every client and the AP. >> > >> >> On Jun 24, 2016, at 07:36, Jeff Evans < >> jev...@pennwisp.com> wrote: >> >> >> >> We're seeing the same thing, not passing packets, but everything else >> >> looks normal. >> >> A reboot of the AP cures it, but no way of knowing until the customer >> calls. >> >> >> >> Jeff >> >> >> >> Quoting Kevin Sullivan < >> kevin.sulli...@alyrica.net>: >> >> >> >>> We're seeing something similar. All the stations show associated at >> >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> >>> (figured it was worth a try). The AP I'm looking at that did this ten >> >>> minutes ago is an XW. >> >>> >> >>> >> >>> >> >>> I'd roll back to 5.5.x, but can't because of the vulnerability. >> >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >>> >> >>> >> >>> >> >>> Kevin >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> From: ubnt_users-boun...@wispa.org >> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> >>> Sent: Thursday, June 23, 2016 11:16 AM >> >>> To: Ubiquiti Users Group >> >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >>> >> >>> >> >>> >> >>> Same here. Either all stations are dropped until reboot or all RX >> >>> rates crash to 6.5 until the station is kicked or AP is rebooted. >> >>> Maddening. I have them all stable but it took different FW >> >>> combinations each time. >> >>> >> >>> >> >>> >> >>> -Ty >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>&g
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
I'm having a similar issue verified on three BulletM2HP units for light
duty sites (5-15 SMs).
Symptoms are that (with 5.6.6) almost all stations will disassociate
then re-associate at the same time. Sometimes it'll just keep bouncing,
sometimes it'll stabilize.
So far, going back to 5.6.4 has mitigated these symptoms. I have a
ticket open with Ubiquiti support, but they've been pretty useless
trying to figure out it.
General configuration is AP-WDS, AirMAX mode, 10MHz channel width, and
WPA2-AES encryption. I've verified it still happens without encryption.
I have not tried disabling WDS.
On 6/24/2016 11:03 AM, mike.l...@gmail.com wrote:
It doesn't :(
On Jun 24, 2016, at 08:00, Matt Hoppes
<mailto:mattli...@rivervalleyinternet.net>> wrote:
Right but in my experience turning on WDS resolves this problem.
On Jun 24, 2016, at 10:45, Ken Patrick <mailto:patr...@my9ja.com>> wrote:
The discussion is on 5.6.5 loosing connection like I stated a few
weeks back.not about wds.
On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes
<mailto:mattli...@rivervalleyinternet.net>> wrote:
What? Turning on wds makes the Mac of the CPE properly visible.
> On Jun 24, 2016, at 09:54, Steve Barnes mailto:st...@pcswin.com>> wrote:
>
> Turning on WDS is not an answer to all the worlds woes. WDS
can cause issue if you are using MAC authentication from the
CPE. Since the maces the CPE MAC transparent.
>
> Steve Barnes
> Wireless Operations Manager
> PCSWIN.COM <http://PCSWIN.COM>
> NLBC.COM <http://NLBC.COM>
>
> -Original Message-
> From: ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] On Behalf Of Matt Hoppes
> Sent: Friday, June 24, 2016 8:55 AM
> To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
>
> Make sure WDS is enabled on every client and the AP.
>
>> On Jun 24, 2016, at 07:36, Jeff Evans mailto:jev...@pennwisp.com>> wrote:
>>
>> We're seeing the same thing, not passing packets, but
everything else
>> looks normal.
>> A reboot of the AP cures it, but no way of knowing until the
customer calls.
>>
>> Jeff
>>
>> Quoting Kevin Sullivan mailto:kevin.sulli...@alyrica.net>>:
>>
>>> We're seeing something similar. All the stations show
associated at
>>> normal RSSI levels, but we lose 90% packets or more. A
reboot brings
>>> the users back online. Seeing the issue on 5.6.6 as well as
6.0beta8
>>> (figured it was worth a try). The AP I'm looking at that did
this ten
>>> minutes ago is an XW.
>>>
>>>
>>>
>>> I'd roll back to 5.5.x, but can't because of the vulnerability.
>>> Anyone know of a stable 5.6.x firmware that works on DFS
frequencies?
>>>
>>>
>>>
>>> Kevin
>>>
>>>
>>>
>>>
>>>
>>> From: ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
>>> [mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] On Behalf Of Ty Featherling
>>> Sent: Thursday, June 23, 2016 11:16 AM
>>> To: Ubiquiti Users Group
>>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until
reboot?
>>>
>>>
>>>
>>> Same here. Either all stations are dropped until reboot or
all RX
>>> rates crash to 6.5 until the station is kicked or AP is
rebooted.
>>> Maddening. I have them all stable but it took different FW
>>> combinations each time.
>>>
>>>
>>>
>>> -Ty
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> -Ty
>>>
>>>
>>>
>>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists
mailto:tekwavli...@gmail.com>> wrote:
>>>
>>> Same here. I show that the STA's are connected, but no data
passing
>>> nor can I get in the STA's GUI. This was a major issue a
month or
>>> so ago for me but it's been quiet with no recent issues once
I moved
>>> the offending AP's to non-DFS bands.
>>>
>>>
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
It doesn't :( > On Jun 24, 2016, at 08:00, Matt Hoppes > wrote: > > Right but in my experience turning on WDS resolves this problem. > >> On Jun 24, 2016, at 10:45, Ken Patrick wrote: >> >> The discussion is on 5.6.5 loosing connection like I stated a few weeks >> back.not about wds. >> >>> On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes >>> wrote: >>> What? Turning on wds makes the Mac of the CPE properly visible. >>> >>> > On Jun 24, 2016, at 09:54, Steve Barnes wrote: >>> > >>> > Turning on WDS is not an answer to all the worlds woes. WDS can cause >>> > issue if you are using MAC authentication from the CPE. Since the maces >>> > the CPE MAC transparent. >>> > >>> > Steve Barnes >>> > Wireless Operations Manager >>> > PCSWIN.COM >>> > NLBC.COM >>> > >>> > -----Original Message----- >>> > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >>> > On Behalf Of Matt Hoppes >>> > Sent: Friday, June 24, 2016 8:55 AM >>> > To: Ubiquiti Users Group >>> > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >>> > >>> > Make sure WDS is enabled on every client and the AP. >>> > >>> >> On Jun 24, 2016, at 07:36, Jeff Evans wrote: >>> >> >>> >> We're seeing the same thing, not passing packets, but everything else >>> >> looks normal. >>> >> A reboot of the AP cures it, but no way of knowing until the customer >>> >> calls. >>> >> >>> >> Jeff >>> >> >>> >> Quoting Kevin Sullivan : >>> >> >>> >>> We're seeing something similar. All the stations show associated at >>> >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings >>> >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >>> >>> (figured it was worth a try). The AP I'm looking at that did this ten >>> >>> minutes ago is an XW. >>> >>> >>> >>> >>> >>> >>> >>> I'd roll back to 5.5.x, but can't because of the vulnerability. >>> >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >>> >>> >>> >>> >>> >>> >>> >>> Kevin >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> From: ubnt_users-boun...@wispa.org >>> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >>> >>> Sent: Thursday, June 23, 2016 11:16 AM >>> >>> To: Ubiquiti Users Group >>> >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >>> >>> >>> >>> >>> >>> >>> >>> Same here. Either all stations are dropped until reboot or all RX >>> >>> rates crash to 6.5 until the station is kicked or AP is rebooted. >>> >>> Maddening. I have them all stable but it took different FW >>> >>> combinations each time. >>> >>> >>> >>> >>> >>> >>> >>> -Ty >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> -Ty >>> >>> >>> >>> >>> >>> >>> >>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists >>> >>> wrote: >>> >>> >>> >>> Same here. I show that the STA's are connected, but no data passing >>> >>> nor can I get in the STA's GUI. This was a major issue a month or >>> >>> so ago for me but it's been quiet with no recent issues once I moved >>> >>> the offending AP's to non-DFS bands. >>> >>> >>> >>> >>> >>> >>> >>> JJ >>> >>> >>> >>> >>> >>> >>> >>> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >>> >>> wrote: >>> >>>
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
The MAC address of the CPA will be visible either way. What won't be visible is the MAC address of devices behind to CP if WDS is off. On Jun 24, 2016 10:00 AM, "Matt Hoppes" wrote: > Right but in my experience turning on WDS resolves this problem. > > On Jun 24, 2016, at 10:45, Ken Patrick wrote: > > The discussion is on 5.6.5 loosing connection like I stated a few weeks > back.not about wds. > > On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes < > mattli...@rivervalleyinternet.net> wrote: > >> What? Turning on wds makes the Mac of the CPE properly visible. >> >> > On Jun 24, 2016, at 09:54, Steve Barnes wrote: >> > >> > Turning on WDS is not an answer to all the worlds woes. WDS can cause >> issue if you are using MAC authentication from the CPE. Since the maces >> the CPE MAC transparent. >> > >> > Steve Barnes >> > Wireless Operations Manager >> > PCSWIN.COM >> > NLBC.COM >> > >> > -Original Message- >> > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> On Behalf Of Matt Hoppes >> > Sent: Friday, June 24, 2016 8:55 AM >> > To: Ubiquiti Users Group >> > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> > >> > Make sure WDS is enabled on every client and the AP. >> > >> >> On Jun 24, 2016, at 07:36, Jeff Evans wrote: >> >> >> >> We're seeing the same thing, not passing packets, but everything else >> >> looks normal. >> >> A reboot of the AP cures it, but no way of knowing until the customer >> calls. >> >> >> >> Jeff >> >> >> >> Quoting Kevin Sullivan : >> >> >> >>> We're seeing something similar. All the stations show associated at >> >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> >>> (figured it was worth a try). The AP I'm looking at that did this ten >> >>> minutes ago is an XW. >> >>> >> >>> >> >>> >> >>> I'd roll back to 5.5.x, but can't because of the vulnerability. >> >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >>> >> >>> >> >>> >> >>> Kevin >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> From: ubnt_users-boun...@wispa.org >> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> >>> Sent: Thursday, June 23, 2016 11:16 AM >> >>> To: Ubiquiti Users Group >> >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >>> >> >>> >> >>> >> >>> Same here. Either all stations are dropped until reboot or all RX >> >>> rates crash to 6.5 until the station is kicked or AP is rebooted. >> >>> Maddening. I have them all stable but it took different FW >> >>> combinations each time. >> >>> >> >>> >> >>> >> >>> -Ty >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> -Ty >> >>> >> >>> >> >>> >> >>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists >> wrote: >> >>> >> >>> Same here. I show that the STA's are connected, but no data passing >> >>> nor can I get in the STA's GUI. This was a major issue a month or >> >>> so ago for me but it's been quiet with no recent issues once I moved >> >>> the offending AP's to non-DFS bands. >> >>> >> >>> >> >>> >> >>> JJ >> >>> >> >>> >> >>> >> >>> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >> >>> wrote: >> >>> >> >>> We haven’t nailed it down to DFS but yes and it’s very random. >> >>> >> >>> >> >>> >> >>> Rory >> >>> >> >>> >> >>> >> >>> From: ubnt_users-boun...@wispa.org >> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >> >&
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Right but in my experience turning on WDS resolves this problem. > On Jun 24, 2016, at 10:45, Ken Patrick wrote: > > The discussion is on 5.6.5 loosing connection like I stated a few weeks > back.not about wds. > >> On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes >> wrote: >> What? Turning on wds makes the Mac of the CPE properly visible. >> >> > On Jun 24, 2016, at 09:54, Steve Barnes wrote: >> > >> > Turning on WDS is not an answer to all the worlds woes. WDS can cause >> > issue if you are using MAC authentication from the CPE. Since the maces >> > the CPE MAC transparent. >> > >> > Steve Barnes >> > Wireless Operations Manager >> > PCSWIN.COM >> > NLBC.COM >> > >> > -Original Message- >> > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> > On Behalf Of Matt Hoppes >> > Sent: Friday, June 24, 2016 8:55 AM >> > To: Ubiquiti Users Group >> > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> > >> > Make sure WDS is enabled on every client and the AP. >> > >> >> On Jun 24, 2016, at 07:36, Jeff Evans wrote: >> >> >> >> We're seeing the same thing, not passing packets, but everything else >> >> looks normal. >> >> A reboot of the AP cures it, but no way of knowing until the customer >> >> calls. >> >> >> >> Jeff >> >> >> >> Quoting Kevin Sullivan : >> >> >> >>> We're seeing something similar. All the stations show associated at >> >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> >>> (figured it was worth a try). The AP I'm looking at that did this ten >> >>> minutes ago is an XW. >> >>> >> >>> >> >>> >> >>> I'd roll back to 5.5.x, but can't because of the vulnerability. >> >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >>> >> >>> >> >>> >> >>> Kevin >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> From: ubnt_users-boun...@wispa.org >> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> >>> Sent: Thursday, June 23, 2016 11:16 AM >> >>> To: Ubiquiti Users Group >> >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >>> >> >>> >> >>> >> >>> Same here. Either all stations are dropped until reboot or all RX >> >>> rates crash to 6.5 until the station is kicked or AP is rebooted. >> >>> Maddening. I have them all stable but it took different FW >> >>> combinations each time. >> >>> >> >>> >> >>> >> >>> -Ty >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> -Ty >> >>> >> >>> >> >>> >> >>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists >> >>> wrote: >> >>> >> >>> Same here. I show that the STA's are connected, but no data passing >> >>> nor can I get in the STA's GUI. This was a major issue a month or >> >>> so ago for me but it's been quiet with no recent issues once I moved >> >>> the offending AP's to non-DFS bands. >> >>> >> >>> >> >>> >> >>> JJ >> >>> >> >>> >> >>> >> >>> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >> >>> wrote: >> >>> >> >>> We haven’t nailed it down to DFS but yes and it’s very random. >> >>> >> >>> >> >>> >> >>> Rory >> >>> >> >>> >> >>> >> >>> From: ubnt_users-boun...@wispa.org >> >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >> >>> Sent: Thursday, June 23, 2016 9:16 AM >> >>> To: Ubiquiti Users Group >> >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >&
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
The discussion is on 5.6.5 loosing connection like I stated a few weeks back.not about wds. On Fri, Jun 24, 2016 at 3:30 PM Matt Hoppes < mattli...@rivervalleyinternet.net> wrote: > What? Turning on wds makes the Mac of the CPE properly visible. > > > On Jun 24, 2016, at 09:54, Steve Barnes wrote: > > > > Turning on WDS is not an answer to all the worlds woes. WDS can cause > issue if you are using MAC authentication from the CPE. Since the maces > the CPE MAC transparent. > > > > Steve Barnes > > Wireless Operations Manager > > PCSWIN.COM > > NLBC.COM > > > > -Original Message- > > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Matt Hoppes > > Sent: Friday, June 24, 2016 8:55 AM > > To: Ubiquiti Users Group > > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > Make sure WDS is enabled on every client and the AP. > > > >> On Jun 24, 2016, at 07:36, Jeff Evans wrote: > >> > >> We're seeing the same thing, not passing packets, but everything else > >> looks normal. > >> A reboot of the AP cures it, but no way of knowing until the customer > calls. > >> > >> Jeff > >> > >> Quoting Kevin Sullivan : > >> > >>> We're seeing something similar. All the stations show associated at > >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings > >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 > >>> (figured it was worth a try). The AP I'm looking at that did this ten > >>> minutes ago is an XW. > >>> > >>> > >>> > >>> I'd roll back to 5.5.x, but can't because of the vulnerability. > >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? > >>> > >>> > >>> > >>> Kevin > >>> > >>> > >>> > >>> > >>> > >>> From: ubnt_users-boun...@wispa.org > >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling > >>> Sent: Thursday, June 23, 2016 11:16 AM > >>> To: Ubiquiti Users Group > >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > >>> > >>> > >>> > >>> Same here. Either all stations are dropped until reboot or all RX > >>> rates crash to 6.5 until the station is kicked or AP is rebooted. > >>> Maddening. I have them all stable but it took different FW > >>> combinations each time. > >>> > >>> > >>> > >>> -Ty > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> -Ty > >>> > >>> > >>> > >>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists > wrote: > >>> > >>> Same here. I show that the STA's are connected, but no data passing > >>> nor can I get in the STA's GUI. This was a major issue a month or > >>> so ago for me but it's been quiet with no recent issues once I moved > >>> the offending AP's to non-DFS bands. > >>> > >>> > >>> > >>> JJ > >>> > >>> > >>> > >>> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway > >>> wrote: > >>> > >>> We haven’t nailed it down to DFS but yes and it’s very random. > >>> > >>> > >>> > >>> Rory > >>> > >>> > >>> > >>> From: ubnt_users-boun...@wispa.org > >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl > >>> Sent: Thursday, June 23, 2016 9:16 AM > >>> To: Ubiquiti Users Group > >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > >>> > >>> > >>> > >>> We see that happen until the AP is rebooted but only if running a > >>> dfs channel. Any other time it never happens. > >>> > >>> Sent from my smartphone. Please excuse any typos. > >>> > >>> On Jun 23, 2016 11:03 AM, wrote: > >>> > >>> Having that problem too... > >>> > >>> > >>> On Jun 23, 2016, at 08:59, Adair Winter > wrote: > >>> > >>> We keep havi
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
What? Turning on wds makes the Mac of the CPE properly visible. > On Jun 24, 2016, at 09:54, Steve Barnes wrote: > > Turning on WDS is not an answer to all the worlds woes. WDS can cause issue > if you are using MAC authentication from the CPE. Since the maces the CPE > MAC transparent. > > Steve Barnes > Wireless Operations Manager > PCSWIN.COM > NLBC.COM > > -Original Message- > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On > Behalf Of Matt Hoppes > Sent: Friday, June 24, 2016 8:55 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > Make sure WDS is enabled on every client and the AP. > >> On Jun 24, 2016, at 07:36, Jeff Evans wrote: >> >> We're seeing the same thing, not passing packets, but everything else >> looks normal. >> A reboot of the AP cures it, but no way of knowing until the customer calls. >> >> Jeff >> >> Quoting Kevin Sullivan : >> >>> We're seeing something similar. All the stations show associated at >>> normal RSSI levels, but we lose 90% packets or more. A reboot brings >>> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >>> (figured it was worth a try). The AP I'm looking at that did this ten >>> minutes ago is an XW. >>> >>> >>> >>> I'd roll back to 5.5.x, but can't because of the vulnerability. >>> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >>> >>> >>> >>> Kevin >>> >>> >>> >>> >>> >>> From: ubnt_users-boun...@wispa.org >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >>> Sent: Thursday, June 23, 2016 11:16 AM >>> To: Ubiquiti Users Group >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >>> >>> >>> >>> Same here. Either all stations are dropped until reboot or all RX >>> rates crash to 6.5 until the station is kicked or AP is rebooted. >>> Maddening. I have them all stable but it took different FW >>> combinations each time. >>> >>> >>> >>> -Ty >>> >>> >>> >>> >>> >>> >>> >>> >>> -Ty >>> >>> >>> >>> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists >>> wrote: >>> >>> Same here. I show that the STA's are connected, but no data passing >>> nor can I get in the STA's GUI. This was a major issue a month or >>> so ago for me but it's been quiet with no recent issues once I moved >>> the offending AP's to non-DFS bands. >>> >>> >>> >>> JJ >>> >>> >>> >>> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >>> wrote: >>> >>> We haven’t nailed it down to DFS but yes and it’s very random. >>> >>> >>> >>> Rory >>> >>> >>> >>> From: ubnt_users-boun...@wispa.org >>> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >>> Sent: Thursday, June 23, 2016 9:16 AM >>> To: Ubiquiti Users Group >>> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >>> >>> >>> >>> We see that happen until the AP is rebooted but only if running a >>> dfs channel. Any other time it never happens. >>> >>> Sent from my smartphone. Please excuse any typos. >>> >>> On Jun 23, 2016 11:03 AM, wrote: >>> >>> Having that problem too... >>> >>> >>> On Jun 23, 2016, at 08:59, Adair Winter wrote: >>> >>> We keep having problems with the station showing their connected but >>> no data is moving >>> >>> On Jun 23, 2016 10:57 AM, wrote: >>> >>> Anyone else seeing XW APs running 5.6.5 loose all of their connected >>> STAs and then when you reboot the AP, they come back? >>> >>> Thanks, >>> Mike >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >>> >>> >>> >>> >>> ___ >>> Ubnt_users mailing list >>> Ubnt_users@wispa.org >>> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
You know.. I never thought about not using WDS for the reason you stated.. that's interesting... On Fri, Jun 24, 2016 at 8:54 AM, Steve Barnes wrote: > Turning on WDS is not an answer to all the worlds woes. WDS can cause > issue if you are using MAC authentication from the CPE. Since the maces > the CPE MAC transparent. > > Steve Barnes > Wireless Operations Manager > PCSWIN.COM > NLBC.COM > > -Original Message- > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Matt Hoppes > Sent: Friday, June 24, 2016 8:55 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > Make sure WDS is enabled on every client and the AP. > > > On Jun 24, 2016, at 07:36, Jeff Evans wrote: > > > > We're seeing the same thing, not passing packets, but everything else > > looks normal. > > A reboot of the AP cures it, but no way of knowing until the customer > calls. > > > > Jeff > > > > Quoting Kevin Sullivan : > > > >> We're seeing something similar. All the stations show associated at > >> normal RSSI levels, but we lose 90% packets or more. A reboot brings > >> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 > >> (figured it was worth a try). The AP I'm looking at that did this ten > >> minutes ago is an XW. > >> > >> > >> > >> I'd roll back to 5.5.x, but can't because of the vulnerability. > >> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? > >> > >> > >> > >> Kevin > >> > >> > >> > >> > >> > >> From: ubnt_users-boun...@wispa.org > >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling > >> Sent: Thursday, June 23, 2016 11:16 AM > >> To: Ubiquiti Users Group > >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > >> > >> > >> > >> Same here. Either all stations are dropped until reboot or all RX > >> rates crash to 6.5 until the station is kicked or AP is rebooted. > >> Maddening. I have them all stable but it took different FW > >> combinations each time. > >> > >> > >> > >> -Ty > >> > >> > >> > >> > >> > >> > >> > >> > >> -Ty > >> > >> > >> > >> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists > wrote: > >> > >> Same here. I show that the STA's are connected, but no data passing > >> nor can I get in the STA's GUI. This was a major issue a month or > >> so ago for me but it's been quiet with no recent issues once I moved > >> the offending AP's to non-DFS bands. > >> > >> > >> > >> JJ > >> > >> > >> > >> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway > >> wrote: > >> > >> We haven’t nailed it down to DFS but yes and it’s very random. > >> > >> > >> > >> Rory > >> > >> > >> > >> From: ubnt_users-boun...@wispa.org > >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl > >> Sent: Thursday, June 23, 2016 9:16 AM > >> To: Ubiquiti Users Group > >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > >> > >> > >> > >> We see that happen until the AP is rebooted but only if running a > >> dfs channel. Any other time it never happens. > >> > >> Sent from my smartphone. Please excuse any typos. > >> > >> On Jun 23, 2016 11:03 AM, wrote: > >> > >> Having that problem too... > >> > >> > >> On Jun 23, 2016, at 08:59, Adair Winter > wrote: > >> > >> We keep having problems with the station showing their connected but > >> no data is moving > >> > >> On Jun 23, 2016 10:57 AM, wrote: > >> > >> Anyone else seeing XW APs running 5.6.5 loose all of their connected > >> STAs and then when you reboot the AP, they come back? > >> > >> Thanks, > >> Mike > >> ___ > >> Ubnt_users mailing list > >> Ubnt_users@wispa.org > >> http://lists.wispa.org/mailman/listinfo/ubnt_users > >> > >> ___ > >> Ubnt_users mailing list > >&
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Turning on WDS is not an answer to all the worlds woes. WDS can cause issue if you are using MAC authentication from the CPE. Since the maces the CPE MAC transparent. Steve Barnes Wireless Operations Manager PCSWIN.COM NLBC.COM -Original Message- From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Matt Hoppes Sent: Friday, June 24, 2016 8:55 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? Make sure WDS is enabled on every client and the AP. > On Jun 24, 2016, at 07:36, Jeff Evans wrote: > > We're seeing the same thing, not passing packets, but everything else > looks normal. > A reboot of the AP cures it, but no way of knowing until the customer calls. > > Jeff > > Quoting Kevin Sullivan : > >> We're seeing something similar. All the stations show associated at >> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> (figured it was worth a try). The AP I'm looking at that did this ten >> minutes ago is an XW. >> >> >> >> I'd roll back to 5.5.x, but can't because of the vulnerability. >> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >> >> >> Kevin >> >> >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> Sent: Thursday, June 23, 2016 11:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> Same here. Either all stations are dropped until reboot or all RX >> rates crash to 6.5 until the station is kicked or AP is rebooted. >> Maddening. I have them all stable but it took different FW >> combinations each time. >> >> >> >> -Ty >> >> >> >> >> >> >> >> >> -Ty >> >> >> >> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: >> >> Same here. I show that the STA's are connected, but no data passing >> nor can I get in the STA's GUI. This was a major issue a month or >> so ago for me but it's been quiet with no recent issues once I moved >> the offending AP's to non-DFS bands. >> >> >> >> JJ >> >> >> >> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >> wrote: >> >> We haven’t nailed it down to DFS but yes and it’s very random. >> >> >> >> Rory >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >> Sent: Thursday, June 23, 2016 9:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> We see that happen until the AP is rebooted but only if running a >> dfs channel. Any other time it never happens. >> >> Sent from my smartphone. Please excuse any typos. >> >> On Jun 23, 2016 11:03 AM, wrote: >> >> Having that problem too... >> >> >> On Jun 23, 2016, at 08:59, Adair Winter wrote: >> >> We keep having problems with the station showing their connected but >> no data is moving >> >> On Jun 23, 2016 10:57 AM, wrote: >> >> Anyone else seeing XW APs running 5.6.5 loose all of their connected >> STAs and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
It is Sent from my Verizon, Samsung Galaxy smartphone Original message From: Matt Hoppes Date: 6/24/16 8:54 AM (GMT-05:00) To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? Make sure WDS is enabled on every client and the AP. > On Jun 24, 2016, at 07:36, Jeff Evans wrote: > > We're seeing the same thing, not passing packets, but everything else > looks normal. > A reboot of the AP cures it, but no way of knowing until the customer calls. > > Jeff > > Quoting Kevin Sullivan : > >> We're seeing something similar. All the stations show associated at >> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> (figured it was worth a try). The AP I'm looking at that did this >> ten minutes ago is an XW. >> >> >> >> I'd roll back to 5.5.x, but can't because of the vulnerability. >> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >> >> >> Kevin >> >> >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> Sent: Thursday, June 23, 2016 11:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> Same here. Either all stations are dropped until reboot or all RX >> rates crash to 6.5 until the station is kicked or AP is rebooted. >> Maddening. I have them all stable but it took different FW >> combinations each time. >> >> >> >> -Ty >> >> >> >> >> >> >> >> >> -Ty >> >> >> >> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: >> >> Same here. I show that the STA's are connected, but no data passing >> nor can I get in the STA's GUI. This was a major issue a month or >> so ago for me but it's been quiet with no recent issues once I moved >> the offending AP's to non-DFS bands. >> >> >> >> JJ >> >> >> >> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >> wrote: >> >> We haven’t nailed it down to DFS but yes and it’s very random. >> >> >> >> Rory >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >> Sent: Thursday, June 23, 2016 9:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> We see that happen until the AP is rebooted but only if running a >> dfs channel. Any other time it never happens. >> >> Sent from my smartphone. Please excuse any typos. >> >> On Jun 23, 2016 11:03 AM, wrote: >> >> Having that problem too... >> >> >> On Jun 23, 2016, at 08:59, Adair Winter wrote: >> >> We keep having problems with the station showing their connected but >> no data is moving >> >> On Jun 23, 2016 10:57 AM, wrote: >> >> Anyone else seeing XW APs running 5.6.5 loose all of their connected >> STAs and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Make sure WDS is enabled on every client and the AP. > On Jun 24, 2016, at 07:36, Jeff Evans wrote: > > We're seeing the same thing, not passing packets, but everything else > looks normal. > A reboot of the AP cures it, but no way of knowing until the customer calls. > > Jeff > > Quoting Kevin Sullivan : > >> We're seeing something similar. All the stations show associated at >> normal RSSI levels, but we lose 90% packets or more. A reboot brings >> the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 >> (figured it was worth a try). The AP I'm looking at that did this >> ten minutes ago is an XW. >> >> >> >> I'd roll back to 5.5.x, but can't because of the vulnerability. >> Anyone know of a stable 5.6.x firmware that works on DFS frequencies? >> >> >> >> Kevin >> >> >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling >> Sent: Thursday, June 23, 2016 11:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> Same here. Either all stations are dropped until reboot or all RX >> rates crash to 6.5 until the station is kicked or AP is rebooted. >> Maddening. I have them all stable but it took different FW >> combinations each time. >> >> >> >> -Ty >> >> >> >> >> >> >> >> >> -Ty >> >> >> >> On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: >> >> Same here. I show that the STA's are connected, but no data passing >> nor can I get in the STA's GUI. This was a major issue a month or >> so ago for me but it's been quiet with no recent issues once I moved >> the offending AP's to non-DFS bands. >> >> >> >> JJ >> >> >> >> On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway >> wrote: >> >> We haven’t nailed it down to DFS but yes and it’s very random. >> >> >> >> Rory >> >> >> >> From: ubnt_users-boun...@wispa.org >> [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl >> Sent: Thursday, June 23, 2016 9:16 AM >> To: Ubiquiti Users Group >> Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> We see that happen until the AP is rebooted but only if running a >> dfs channel. Any other time it never happens. >> >> Sent from my smartphone. Please excuse any typos. >> >> On Jun 23, 2016 11:03 AM, wrote: >> >> Having that problem too... >> >> >> On Jun 23, 2016, at 08:59, Adair Winter wrote: >> >> We keep having problems with the station showing their connected but >> no data is moving >> >> On Jun 23, 2016 10:57 AM, wrote: >> >> Anyone else seeing XW APs running 5.6.5 loose all of their connected >> STAs and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
We're seeing the same thing, not passing packets, but everything else looks normal. A reboot of the AP cures it, but no way of knowing until the customer calls. Jeff Quoting Kevin Sullivan : > We're seeing something similar. All the stations show associated at > normal RSSI levels, but we lose 90% packets or more. A reboot brings > the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 > (figured it was worth a try). The AP I'm looking at that did this > ten minutes ago is an XW. > > > > I'd roll back to 5.5.x, but can't because of the vulnerability. > Anyone know of a stable 5.6.x firmware that works on DFS frequencies? > > > > Kevin > > > > > > From: ubnt_users-boun...@wispa.org > [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling > Sent: Thursday, June 23, 2016 11:16 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > Same here. Either all stations are dropped until reboot or all RX > rates crash to 6.5 until the station is kicked or AP is rebooted. > Maddening. I have them all stable but it took different FW > combinations each time. > > > > -Ty > > > > > > > > > -Ty > > > > On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: > > Same here. I show that the STA's are connected, but no data passing > nor can I get in the STA's GUI. This was a major issue a month or > so ago for me but it's been quiet with no recent issues once I moved > the offending AP's to non-DFS bands. > > > > JJ > > > > On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway > wrote: > > We haven’t nailed it down to DFS but yes and it’s very random. > > > > Rory > > > > From: ubnt_users-boun...@wispa.org > [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl > Sent: Thursday, June 23, 2016 9:16 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > We see that happen until the AP is rebooted but only if running a > dfs channel. Any other time it never happens. > > Sent from my smartphone. Please excuse any typos. > > On Jun 23, 2016 11:03 AM, wrote: > > Having that problem too... > > > On Jun 23, 2016, at 08:59, Adair Winter wrote: > > We keep having problems with the station showing their connected but > no data is moving > > On Jun 23, 2016 10:57 AM, wrote: > > Anyone else seeing XW APs running 5.6.5 loose all of their connected > STAs and then when you reboot the AP, they come back? > > Thanks, > Mike > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Someone make a 5.6.4 with the directories locked down and see if it's 5.6.4 that's better. On Fri, June 24, 2016 2:54 am, Kevin Sullivan wrote: > We're seeing something similar. All the stations show associated at > normal RSSI levels, but we lose 90% packets or more. A reboot brings the > users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 (figured > it was worth a try). The AP I'm looking at that did this ten minutes ago > is an XW. > > > > I'd roll back to 5.5.x, but can't because of the vulnerability. Anyone > know of a stable 5.6.x firmware that works on DFS frequencies? > > > > Kevin > > > > > > > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Ty Featherling > Sent: Thursday, June 23, 2016 11:16 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > > Same here. Either all stations are dropped until reboot or all RX rates > crash to 6.5 until the station is kicked or AP is rebooted. Maddening. I > have them all stable but it took different FW combinations each time. > > > > -Ty > > > > > > > > > > -Ty > > > > > On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists > wrote: > > > Same here. I show that the STA's are connected, but no data passing nor > can I get in the STA's GUI. This was a major issue a month or so ago for > me but it's been quiet with no recent issues once I moved the offending > AP's to non-DFS bands. > > > > > JJ > > > > > On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway > wrote: > > > We haven’t nailed it down to DFS but yes and it’s very random. > > > > > Rory > > > > > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > On Behalf Of Darin Steffl > Sent: Thursday, June 23, 2016 9:16 AM > To: Ubiquiti Users Group > Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > > We see that happen until the AP is rebooted but only if running a dfs > channel. Any other time it never happens. > > Sent from my smartphone. Please excuse any typos. > > > On Jun 23, 2016 11:03 AM, wrote: > > > Having that problem too... > > > > On Jun 23, 2016, at 08:59, Adair Winter > wrote: > > > We keep having problems with the station showing their connected but no > data is moving > > On Jun 23, 2016 10:57 AM, wrote: > > > Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs > and then when you reboot the AP, they come back? > > Thanks, > Mike > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
We're seeing something similar. All the stations show associated at normal RSSI levels, but we lose 90% packets or more. A reboot brings the users back online. Seeing the issue on 5.6.6 as well as 6.0beta8 (figured it was worth a try). The AP I'm looking at that did this ten minutes ago is an XW. I'd roll back to 5.5.x, but can't because of the vulnerability. Anyone know of a stable 5.6.x firmware that works on DFS frequencies? Kevin From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling Sent: Thursday, June 23, 2016 11:16 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? Same here. Either all stations are dropped until reboot or all RX rates crash to 6.5 until the station is kicked or AP is rebooted. Maddening. I have them all stable but it took different FW combinations each time. -Ty -Ty On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: Same here. I show that the STA's are connected, but no data passing nor can I get in the STA's GUI. This was a major issue a month or so ago for me but it's been quiet with no recent issues once I moved the offending AP's to non-DFS bands. JJ On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway wrote: We haven’t nailed it down to DFS but yes and it’s very random. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl Sent: Thursday, June 23, 2016 9:16 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? We see that happen until the AP is rebooted but only if running a dfs channel. Any other time it never happens. Sent from my smartphone. Please excuse any typos. On Jun 23, 2016 11:03 AM, wrote: Having that problem too... On Jun 23, 2016, at 08:59, Adair Winter wrote: We keep having problems with the station showing their connected but no data is moving On Jun 23, 2016 10:57 AM, wrote: Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs and then when you reboot the AP, they come back? Thanks, Mike ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Same here. Either all stations are dropped until reboot or all RX rates crash to 6.5 until the station is kicked or AP is rebooted. Maddening. I have them all stable but it took different FW combinations each time. -Ty -Ty On Thu, Jun 23, 2016 at 12:33 PM, Tekwav Lists wrote: > Same here. I show that the STA's are connected, but no data passing nor > can I get in the STA's GUI. This was a major issue a month or so ago for > me but it's been quiet with no recent issues once I moved the > offending AP's to non-DFS bands. > > JJ > > On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway > wrote: > >> We haven’t nailed it down to DFS but yes and it’s very random. >> >> >> >> Rory >> >> >> >> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] >> *On Behalf Of *Darin Steffl >> *Sent:* Thursday, June 23, 2016 9:16 AM >> *To:* Ubiquiti Users Group >> *Subject:* Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? >> >> >> >> We see that happen until the AP is rebooted but only if running a dfs >> channel. Any other time it never happens. >> >> Sent from my smartphone. Please excuse any typos. >> >> On Jun 23, 2016 11:03 AM, wrote: >> >> Having that problem too... >> >> >> On Jun 23, 2016, at 08:59, Adair Winter >> wrote: >> >> We keep having problems with the station showing their connected but no >> data is moving >> >> On Jun 23, 2016 10:57 AM, wrote: >> >> Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs >> and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> >> > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Same here. I show that the STA's are connected, but no data passing nor can I get in the STA's GUI. This was a major issue a month or so ago for me but it's been quiet with no recent issues once I moved the offending AP's to non-DFS bands. JJ On Thu, Jun 23, 2016 at 11:33 AM, Rory Conaway wrote: > We haven’t nailed it down to DFS but yes and it’s very random. > > > > Rory > > > > *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] > *On Behalf Of *Darin Steffl > *Sent:* Thursday, June 23, 2016 9:16 AM > *To:* Ubiquiti Users Group > *Subject:* Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? > > > > We see that happen until the AP is rebooted but only if running a dfs > channel. Any other time it never happens. > > Sent from my smartphone. Please excuse any typos. > > On Jun 23, 2016 11:03 AM, wrote: > > Having that problem too... > > > On Jun 23, 2016, at 08:59, Adair Winter > wrote: > > We keep having problems with the station showing their connected but no > data is moving > > On Jun 23, 2016 10:57 AM, wrote: > > Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs > and then when you reboot the AP, they come back? > > Thanks, > Mike > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
We haven’t nailed it down to DFS but yes and it’s very random. Rory From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Darin Steffl Sent: Thursday, June 23, 2016 9:16 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot? We see that happen until the AP is rebooted but only if running a dfs channel. Any other time it never happens. Sent from my smartphone. Please excuse any typos. On Jun 23, 2016 11:03 AM, mailto:mike.l...@gmail.com>> wrote: Having that problem too... On Jun 23, 2016, at 08:59, Adair Winter mailto:ada...@amarillowireless.net>> wrote: We keep having problems with the station showing their connected but no data is moving On Jun 23, 2016 10:57 AM, mailto:mike.l...@gmail.com>> wrote: Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs and then when you reboot the AP, they come back? Thanks, Mike ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org> http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
We see that happen until the AP is rebooted but only if running a dfs channel. Any other time it never happens. Sent from my smartphone. Please excuse any typos. On Jun 23, 2016 11:03 AM, wrote: > Having that problem too... > > On Jun 23, 2016, at 08:59, Adair Winter > wrote: > > We keep having problems with the station showing their connected but no > data is moving > On Jun 23, 2016 10:57 AM, wrote: > >> Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs >> and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Having that problem too... > On Jun 23, 2016, at 08:59, Adair Winter wrote: > > We keep having problems with the station showing their connected but no data > is moving > >> On Jun 23, 2016 10:57 AM, wrote: >> Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs >> and then when you reboot the AP, they come back? >> >> Thanks, >> Mike >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
We keep having problems with the station showing their connected but no data is moving On Jun 23, 2016 10:57 AM, wrote: > Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs > and then when you reboot the AP, they come back? > > Thanks, > Mike > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] 5.6.5 APs loosing at STAs until reboot?
Anyone else seeing XW APs running 5.6.5 loose all of their connected STAs and then when you reboot the AP, they come back? Thanks, Mike ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
