Re: [Ubnt_users] F-POE gen2 issue
It turned out to be a bad manufactured cat7 which pin 7 was missing. This makes the cat7 run at 100Mbps! We use hundreds of these double-shielded outdoorcat7s on our towers and never had an issue! On Wed, Sep 25, 2019 at 10:59 AM Mimbres Communications wrote: > What's it connected to on the copper side? The F-POE does not support > 10/100baseTX Ethernet. > > Is this an indoor or an outdoor application? > > On Wed, Sep 25, 2019 at 7:27 AM Clay Stewart > wrote: > >> Been working an issue for couple days, thinking we had a fiber run issue >> in new run, lateral, SFP, etc... >> >> But emulating the setup on a table, I find the issue is the gen2 is >> connecting 1g on fiber end, and 100Mbps on cat5 side and NOT passing any >> traffic. >> >> Anyone have any experience with this? We have dozens of 1st gens setup >> for years with zero issues using same SFP and setup. >> ___ >> Ubnt_users mailing list >> Ubnt_users@wispa.org >> http://lists.wispa.org/mailman/listinfo/ubnt_users >> > > > -- > > Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042 > > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] F-POE gen2 issue
What's it connected to on the copper side? The F-POE does not support 10/100baseTX Ethernet. Is this an indoor or an outdoor application? On Wed, Sep 25, 2019 at 7:27 AM Clay Stewart wrote: > Been working an issue for couple days, thinking we had a fiber run issue > in new run, lateral, SFP, etc... > > But emulating the setup on a table, I find the issue is the gen2 is > connecting 1g on fiber end, and 100Mbps on cat5 side and NOT passing any > traffic. > > Anyone have any experience with this? We have dozens of 1st gens setup for > years with zero issues using same SFP and setup. > ___ > Ubnt_users mailing list > Ubnt_users@wispa.org > http://lists.wispa.org/mailman/listinfo/ubnt_users > -- Kurt Albershardt | Mimbres Communications, LLC | 575-342-0042 ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] F-POE gen2 issue
Been working an issue for couple days, thinking we had a fiber run issue in new run, lateral, SFP, etc... But emulating the setup on a table, I find the issue is the gen2 is connecting 1g on fiber end, and 100Mbps on cat5 side and NOT passing any traffic. Anyone have any experience with this? We have dozens of 1st gens setup for years with zero issues using same SFP and setup. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users