Re: [Ubnt_users] Station connected and working but management UI won't respond
SSH didn't work for me either. Neither did ping nor a reboot. Funny though as it passed traffic! On Fri, Jan 9, 2015 at 2:59 PM, Ty Featherling tyfeatherl...@gmail.com wrote: SSH didn't work from the AP to the one that doesn't respond to SSH anyway. It did from the other but same problem, reboot command does nothing. It IS just radio# reboot right? Ping command from affected radio works fine. -Ty On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com wrote: I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto: ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Station connected and working but management UI won't respond
I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Firmware versions? 5.5.4 had some bad memory leaks. 5.5.6 had a moderate memleak with SNMP enabled On January 9, 2015 7:21:23 AM AKST, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Sent from my Android device with K-9 Mail. Please excuse my brevity.___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
I've got one now that I swapped out. Going to look at it soon. Will advise. On Fri, Jan 9, 2015 at 11:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling Sent: Friday, January 09, 2015 9:43 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net mailto:ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com mailto:tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 tel:806.316.5071 C: 806.231.7180 tel:806.231.7180 http://www.amarillowireless.net http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
SSH didn't work from the AP to the one that doesn't respond to SSH anyway. It did from the other but same problem, reboot command does nothing. It IS just radio# reboot right? Ping command from affected radio works fine. -Ty On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com wrote: I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users