Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mimbres Communications 
I think I may have found the source of some potential confusion here:

https://community.ubnt.com/t5/airMAX-M-Beta/6-0-6-on-official-download-is-it-beta-or-release-REAL-JUNK/m-p/1985788
claims that 6.0.6-BETA

 *does* allow downgrades -- and can itself be uploaded to radios running
6.0.6 GA .
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Tiago SR 
I not only blame UBNT for that, but also have to say: Ubiquiti, you do not own 
your customer's equipments!
If your fucking M5 products were decent, there would be no need for migrating 
to ePMP.

Thank Gosh it's still possible to install third party firmwares after 
downgrading to 6.0.4.

  On Fri, 07 Jul 2017 17:24:07 -0300 Tommy Adams <tomm...@digitex.net> 
wrote  
 > My guess is this is to stop ePMP elevate.  Cannot blame UBNT if that is the 
 > case.  I am elevating everything I can and getting away from the UBNT rat 
 > race.  I crave stability and that is what I am getting with ePMP. 
 >  
 >  
 > --- 
 > Tommy Adams 
 > Network Administrator 
 > Digitex.com 
 >  
 > 817.558.6230 Voice 
 > 817.558.1204 Fax 
 >  
 >  
 >  
 > -Original Message- 
 > From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
 > Behalf Of Robert 
 > Sent: Friday, July 07, 2017 3:21 PM 
 > To: Ubiquiti Users Group <ubnt_users@wispa.org> 
 > Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING 
 >  
 > Secure, as in cannot load competitors firmware... 
 >  
 > On 07/07/2017 12:58 PM, mike.l...@gmail.com wrote: 
 > > Man, that sucks ass. Siklu started doing that too... 
 > > 
 > > But, if its more secure... 
 > > 
 > > On Jul 7, 2017, at 12:52, Mitch <mi...@abetterwireless.com  
 > > <mailto:mi...@abetterwireless.com>> wrote: 
 > > 
 > >> The firmware pre 6.0.6 is not a "secure" firmware so 
 > >> 
 > >> the radios will not allow it to be loaded via Gui nor ssh 
 > >> 
 > >> The only way to get older firmware on the radio after upgrade to  
 > >> 6.0.6 
 > >> 
 > >> is to TFTP the radio and load pre 6.0.6 
 > >> 
 > >> 
 > >> Mitch Koep 
 > >> 
 > >> 
 > >> On 7/7/2017 2:13 PM, Mike Hammett wrote: 
 > >>> What change is needed on how old of firmware? 
 > >>> 
 > >>> 
 > >>> 
 > >>> - 
 > >>> Mike Hammett 
 > >>> Intelligent Computing Solutions <http://www.ics-il.com/>  
 > >>> <https://www.facebook.com/ICSIL><https://plus.google.com/+Intelligen 
 > >>> tComputingSolutionsDeKalb><https://www.linkedin.com/company/intellig 
 > >>> ent-computing-solutions><https://twitter.com/ICSIL> 
 > >>> Midwest Internet Exchange <http://www.midwest-ix.com/>  
 > >>> <https://www.facebook.com/mdwestix><https://www.linkedin.com/company 
 > >>> /midwest-internet-exchange><https://twitter.com/mdwestix> 
 > >>> The Brothers WISP <http://www.thebrotherswisp.com/>  
 > >>> <https://www.facebook.com/thebrotherswisp><https://www.youtube.com/c 
 > >>> hannel/UCXSdfxQv7SpoRQYNyLwntZg> 
 > >>>  
 > >>>  
 > >>> *From: *"Mitch" <mi...@abetterwireless.com> 
 > >>> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org> 
 > >>> *Sent: *Friday, July 7, 2017 1:45:30 PM 
 > >>> *Subject: *Re: [Ubnt_users] UBNT 6.0.6 WARNING 
 > >>> 
 > >>> The latest reply from support 
 > >>> 
 > >>> 
 > >>> *Donald G.* (Ubiquiti Networks) 
 > >>> 
 > >>> Jul 7, 08:33 PDT 
 > >>> 
 > >>> Hi Mitch, 
 > >>> 
 > >>> I can understand the concern but I'm not sure if there is going to  
 > >>> be any changes made on the old firmwares. 
 > >>> 
 > >>> If you have any other questions, please let us know! 
 > >>> 
 > >>> Thanks! 
 > >>> 
 > >>> Donald G. 
 > >>> Ubiquiti Networks 
 > >>> 
 > >>> 
 > >>> On 7/7/2017 12:08 PM, James Wilson wrote: 
 > >>> 
 > >>> Thanks Chris, you may have just saved us from some misery! 
 > >>> 
 > >>> On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net 
 > >>> <mailto:csoi...@riocities.net>> wrote: 
 > >>> 
 > >>> I had an issue when upgrading to 8.3 is it deactivated UNII 
 > >>> and didn't associate with the AP when it rebooted 
 > >>> 
 > >>> Sent from iPhone 6S Plus 
 > >>> 
 > >>> Chris Soiles 
 > >>> Owner 
 &

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Rory Conaway 
What is the reason for this?

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Mike Hammett
Sent: Friday, July 07, 2017 12:14 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING

What change is needed on how old of firmware?


-
Mike Hammett
Intelligent Computing Solutions<http://www.ics-il.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL>
Midwest Internet Exchange<http://www.midwest-ix.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix>
The Brothers WISP<http://www.thebrotherswisp.com/>
[http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png]<https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

From: "Mitch" <mi...@abetterwireless.com<mailto:mi...@abetterwireless.com>>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Sent: Friday, July 7, 2017 1:45:30 PM
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING

The latest reply from support



Donald G. (Ubiquiti Networks)

Jul 7, 08:33 PDT
Hi Mitch,

I can understand the concern but I'm not sure if there is going to be any 
changes made on the old firmwares.

If you have any other questions, please let us know!

Thanks!

Donald G.
Ubiquiti Networks

On 7/7/2017 12:08 PM, James Wilson wrote:
Thanks Chris, you may have just saved us from some misery!

On Jul 7, 2017 1:02 PM, "Chris Soiles" 
<csoi...@riocities.net<mailto:csoi...@riocities.net>> wrote:
I had an issue when upgrading to 8.3 is it deactivated UNII and didn't 
associate with the AP when it rebooted
Sent from iPhone 6S Plus

Chris Soiles
Owner
Rio Cities
csoi...@riocities.net<mailto:csoi...@riocities.net>
505-966-6389

On Jul 7, 2017, at 11:00 AM, James Wilson 
<ja...@ridgecomms.com<mailto:ja...@ridgecomms.com>> wrote:
We just received an AC 'chiclet' that had 8.1.something on it that wouldn't let 
us use an 8.0.2 (our current known working version on all of our AC radios) 
configuration on it.  And it wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2 
configuration, put 8.3 on it, and back up a new 8.3 configuration.  Fortunately 
we figured this out in the office before we took it to the field.

8.3 does seem to be working so far, but all of these firmware versions needing 
new configurations is almost as bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams 
<tomm...@digitex.net<mailto:tomm...@digitex.net>> wrote:
Welcome to UBNT.


---
Tommy Adams
Network Administrator
Digitex.com<http://Digitex.com>

817.558.6230<tel:%28817%29%20558-6230> Voice
817.558.1204<tel:%28817%29%20558-1204> Fax



From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org>] On 
Behalf Of Jan-OOLLC
Sent: Friday, July 07, 2017 10:30 AM
To: ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING


How does something like this get out of the factory?

Jan V
On 07/07/2017 08:05 AM, RickG wrote:
Yup! Happened to me. Fortunately I was bench testing ;)

On Fri, Jul 7, 2017 at 5:59 AM, 
<mi...@abetterwireless.com<mailto:mi...@abetterwireless.com>> wrote:
Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689<tel:%28218%29%20851-8689> cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users



--
-RickG



___

Ubnt_users mailing list

Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users

___ Ubnt_users mailing list 
Ubnt_users@wispa.org<mailto:Ubnt_

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Tommy Adams 
My guess is this is to stop ePMP elevate.  Cannot blame UBNT if that is the
case.  I am elevating everything I can and getting away from the UBNT rat
race.  I crave stability and that is what I am getting with ePMP.


---
Tommy Adams
Network Administrator
Digitex.com

817.558.6230 Voice
817.558.1204 Fax



-Original Message-
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of Robert
Sent: Friday, July 07, 2017 3:21 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING

Secure, as in cannot load competitors firmware...

On 07/07/2017 12:58 PM, mike.l...@gmail.com wrote:
> Man, that sucks ass. Siklu started doing that too...
>
> But, if its more secure...
>
> On Jul 7, 2017, at 12:52, Mitch <mi...@abetterwireless.com 
> <mailto:mi...@abetterwireless.com>> wrote:
>
>> The firmware pre 6.0.6 is not a "secure" firmware so
>>
>> the radios will not allow it to be loaded via Gui nor ssh
>>
>> The only way to get older firmware on the radio after upgrade to 
>> 6.0.6
>>
>> is to TFTP the radio and load pre 6.0.6
>>
>>
>> Mitch Koep
>>
>>
>> On 7/7/2017 2:13 PM, Mike Hammett wrote:
>>> What change is needed on how old of firmware?
>>>
>>>
>>>
>>> -
>>> Mike Hammett
>>> Intelligent Computing Solutions <http://www.ics-il.com/> 
>>> <https://www.facebook.com/ICSIL><https://plus.google.com/+Intelligen
>>> tComputingSolutionsDeKalb><https://www.linkedin.com/company/intellig
>>> ent-computing-solutions><https://twitter.com/ICSIL>
>>> Midwest Internet Exchange <http://www.midwest-ix.com/> 
>>> <https://www.facebook.com/mdwestix><https://www.linkedin.com/company
>>> /midwest-internet-exchange><https://twitter.com/mdwestix>
>>> The Brothers WISP <http://www.thebrotherswisp.com/> 
>>> <https://www.facebook.com/thebrotherswisp><https://www.youtube.com/c
>>> hannel/UCXSdfxQv7SpoRQYNyLwntZg>
>>> 
>>> 
>>> *From: *"Mitch" <mi...@abetterwireless.com>
>>> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
>>> *Sent: *Friday, July 7, 2017 1:45:30 PM
>>> *Subject: *Re: [Ubnt_users] UBNT 6.0.6 WARNING
>>>
>>> The latest reply from support
>>>
>>>
>>> *Donald G.* (Ubiquiti Networks)
>>>
>>> Jul 7, 08:33 PDT
>>>
>>> Hi Mitch,
>>>
>>> I can understand the concern but I'm not sure if there is going to 
>>> be any changes made on the old firmwares.
>>>
>>> If you have any other questions, please let us know!
>>>
>>> Thanks!
>>>
>>> Donald G.
>>> Ubiquiti Networks
>>>
>>>
>>> On 7/7/2017 12:08 PM, James Wilson wrote:
>>>
>>> Thanks Chris, you may have just saved us from some misery!
>>>
>>> On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net
>>> <mailto:csoi...@riocities.net>> wrote:
>>>
>>> I had an issue when upgrading to 8.3 is it deactivated UNII
>>> and didn't associate with the AP when it rebooted
>>>
>>> Sent from iPhone 6S Plus
>>>
>>> Chris Soiles
>>> Owner
>>> Rio Cities
>>> csoi...@riocities.net <mailto:csoi...@riocities.net>
>>> 505-966-6389 
>>>
>>> On Jul 7, 2017, at 11:00 AM, James Wilson
>>> <ja...@ridgecomms.com <mailto:ja...@ridgecomms.com>> wrote:
>>>
>>> We just received an AC 'chiclet' that had 8.1.something
>>> on it that wouldn't let us use an 8.0.2 (our current
>>> known working version on all of our AC radios)
>>> configuration on it.  And it wouldn't let us put 8.0.2 on
>>> it!
>>>
>>> We had to find a PBE 5 AC radio, put 8.0.2 on it, load up
>>> the 8.0.2 configuration, put 8.3 on it, and back up a new
>>> 8.3 configuration.  Fortunately we figured this out in
>>> the office before we took it to the field.
>>>
>>> 8.3 does seem to be working so far, but all of these
>>> firmware versions needing new configurations is a

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Robert 
Secure, as in cannot load competitors firmware...

On 07/07/2017 12:58 PM, mike.l...@gmail.com wrote:
> Man, that sucks ass. Siklu started doing that too...
>
> But, if its more secure...
>
> On Jul 7, 2017, at 12:52, Mitch <mi...@abetterwireless.com
> <mailto:mi...@abetterwireless.com>> wrote:
>
>> The firmware pre 6.0.6 is not a "secure" firmware so
>>
>> the radios will not allow it to be loaded via Gui nor ssh
>>
>> The only way to get older firmware on the radio after upgrade to 6.0.6
>>
>> is to TFTP the radio and load pre 6.0.6
>>
>>
>> Mitch Koep
>>
>>
>> On 7/7/2017 2:13 PM, Mike Hammett wrote:
>>> What change is needed on how old of firmware?
>>>
>>>
>>>
>>> -
>>> Mike Hammett
>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>> <https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>> <https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>> <https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>> 
>>> *From: *"Mitch" <mi...@abetterwireless.com>
>>> *To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
>>> *Sent: *Friday, July 7, 2017 1:45:30 PM
>>> *Subject: *Re: [Ubnt_users] UBNT 6.0.6 WARNING
>>>
>>> The latest reply from support
>>>
>>>
>>> *Donald G.* (Ubiquiti Networks)
>>>
>>> Jul 7, 08:33 PDT
>>>
>>> Hi Mitch,
>>>
>>> I can understand the concern but I'm not sure if there is going to be
>>> any changes made on the old firmwares.
>>>
>>> If you have any other questions, please let us know!
>>>
>>> Thanks!
>>>
>>> Donald G.
>>> Ubiquiti Networks
>>>
>>>
>>> On 7/7/2017 12:08 PM, James Wilson wrote:
>>>
>>> Thanks Chris, you may have just saved us from some misery!
>>>
>>> On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net
>>> <mailto:csoi...@riocities.net>> wrote:
>>>
>>> I had an issue when upgrading to 8.3 is it deactivated UNII
>>> and didn't associate with the AP when it rebooted
>>>
>>> Sent from iPhone 6S Plus
>>>
>>> Chris Soiles
>>> Owner
>>> Rio Cities
>>> csoi...@riocities.net <mailto:csoi...@riocities.net>
>>> 505-966-6389 
>>>
>>> On Jul 7, 2017, at 11:00 AM, James Wilson
>>> <ja...@ridgecomms.com <mailto:ja...@ridgecomms.com>> wrote:
>>>
>>> We just received an AC 'chiclet' that had 8.1.something
>>> on it that wouldn't let us use an 8.0.2 (our current
>>> known working version on all of our AC radios)
>>> configuration on it.  And it wouldn't let us put 8.0.2 on
>>> it!
>>>
>>> We had to find a PBE 5 AC radio, put 8.0.2 on it, load up
>>> the 8.0.2 configuration, put 8.3 on it, and back up a new
>>> 8.3 configuration.  Fortunately we figured this out in
>>> the office before we took it to the field.
>>>
>>> 8.3 does seem to be working so far, but all of these
>>> firmware versions needing new configurations is almost as
>>> bad as MikroTik!
>>>
>>>
>>>
>>>
>>> On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams
>>>     <tomm...@digitex.net <mailto:tomm...@digitex.net>> wrote:
>>>
>>> Welcome to UBNT.
>>>
>>>
>>>
>>>
>>>
>>> ---
>>>
>>> Tommy Adams
>>>
>>> Network Administrator
>>>
>>> Digitex.com <http://Digitex.com>

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread mike . lyon 
Man, that sucks ass. Siklu started doing that too...

But, if its more secure...

> On Jul 7, 2017, at 12:52, Mitch <mi...@abetterwireless.com> wrote:
> 
> The firmware pre 6.0.6 is not a "secure" firmware so
> 
> the radios will not allow it to be loaded via Gui nor ssh
> 
> The only way to get older firmware on the radio after upgrade to 6.0.6 
> is to TFTP the radio and load pre 6.0.6
> 
> 
> Mitch Koep
> 
>> On 7/7/2017 2:13 PM, Mike Hammett wrote:
>> What change is needed on how old of firmware?
>> 
>> 
>> 
>> -
>> Mike Hammett
>> Intelligent Computing Solutions
>> 
>> Midwest Internet Exchange
>> 
>> The Brothers WISP
>> 
>> From: "Mitch" <mi...@abetterwireless.com>
>> To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
>> Sent: Friday, July 7, 2017 1:45:30 PM
>> Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING
>> 
>> The latest reply from support
>> 
>> 
>> Donald G. (Ubiquiti Networks)
>> Jul 7, 08:33 PDT
>> 
>> Hi Mitch,
>> 
>> I can understand the concern but I'm not sure if there is going to be any 
>> changes made on the old firmwares.
>> 
>> If you have any other questions, please let us know!
>> 
>> Thanks!
>> 
>> Donald G.
>> Ubiquiti Networks
>> 
>> 
>> On 7/7/2017 12:08 PM, James Wilson wrote:
>> Thanks Chris, you may have just saved us from some misery!
>> 
>> On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net> wrote:
>> I had an issue when upgrading to 8.3 is it deactivated UNII and didn't 
>> associate with the AP when it rebooted 
>> 
>> Sent from iPhone 6S Plus
>>  
>> Chris Soiles
>> Owner
>> Rio Cities
>> csoi...@riocities.net
>> 505-966-6389
>> 
>> On Jul 7, 2017, at 11:00 AM, James Wilson <ja...@ridgecomms.com> wrote:
>> 
>> We just received an AC 'chiclet' that had 8.1.something on it that wouldn't 
>> let us use an 8.0.2 (our current known working version on all of our AC 
>> radios) configuration on it.  And it wouldn't let us put 8.0.2 on it!
>> 
>> We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2 
>> configuration, put 8.3 on it, and back up a new 8.3 configuration.  
>> Fortunately we figured this out in the office before we took it to the field.
>> 
>> 8.3 does seem to be working so far, but all of these firmware versions 
>> needing new configurations is almost as bad as MikroTik!
>> 
>> 
>> 
>> 
>>> On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net> wrote:
>>> Welcome to UBNT.
>>> 
>>>  
>>> 
>>>  
>>> 
>>> ---
>>> 
>>> Tommy Adams
>>> 
>>> Network Administrator
>>> 
>>> Digitex.com
>>> 
>>>  
>>> 
>>> 817.558.6230 Voice
>>> 
>>> 817.558.1204 Fax
>>> 
>>>  
>>> 
>>>  
>>> 
>>>  
>>> 
>>> From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
>>> Behalf Of Jan-OOLLC
>>> Sent: Friday, July 07, 2017 10:30 AM
>>> To: ubnt_users@wispa.org
>>> Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING
>>> 
>>>  
>>> 
>>> How does something like this get out of the 
>>>   factory?
>>> 
>>> Jan V
>>> 
>>> On 07/07/2017 08:05 AM, RickG wrote:
>>> 
>>> Yup! Happened to me. Fortunately I was bench testing ;)
>>> 
>>>  
>>> 
>>> On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com> wrote:
>>> 
>>> Everyone
>>> 
>>> Heads up if you upgrade to 6.0.6 it will NOT allow
>>> 
>>> you to down grade firmware and seems to break
>>> 
>>> the LAN side of the radio.
>>> 
>>> Allows POE but no data and no LAN Graph
>>> 
>>> Have opened a support ticket but so far not much help
>>> 
>>> Looks like truck rolls to change radios so be careful
>>> 
>>> Mitch Koep
>>> 
>>> 218-851-8689 cell
>>> 
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>> 
>>> 
&g

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mitch 

The firmware pre 6.0.6 is not a "secure" firmware so

the radios will not allow it to be loaded via Gui nor ssh

The only way to get older firmware on the radio after upgrade to 6.0.6

is to TFTP the radio and load pre 6.0.6


Mitch Koep


On 7/7/2017 2:13 PM, Mike Hammett wrote:

What change is needed on how old of firmware?



-
Mike Hammett
Intelligent Computing Solutions <http://www.ics-il.com/>
<https://www.facebook.com/ICSIL><https://plus.google.com/+IntelligentComputingSolutionsDeKalb><https://www.linkedin.com/company/intelligent-computing-solutions><https://twitter.com/ICSIL>
Midwest Internet Exchange <http://www.midwest-ix.com/>
<https://www.facebook.com/mdwestix><https://www.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix>
The Brothers WISP <http://www.thebrotherswisp.com/>
<https://www.facebook.com/thebrotherswisp><https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>

*From: *"Mitch" <mi...@abetterwireless.com>
*To: *"Ubiquiti Users Group" <ubnt_users@wispa.org>
*Sent: *Friday, July 7, 2017 1:45:30 PM
*Subject: *Re: [Ubnt_users] UBNT 6.0.6 WARNING

The latest reply from support


*Donald G.* (Ubiquiti Networks)

Jul 7, 08:33 PDT

Hi Mitch,

I can understand the concern but I'm not sure if there is going to be 
any changes made on the old firmwares.


If you have any other questions, please let us know!

Thanks!

Donald G.
Ubiquiti Networks


On 7/7/2017 12:08 PM, James Wilson wrote:

Thanks Chris, you may have just saved us from some misery!

On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net
<mailto:csoi...@riocities.net>> wrote:

I had an issue when upgrading to 8.3 is it deactivated UNII
and didn't associate with the AP when it rebooted

Sent from iPhone 6S Plus
Chris Soiles
Owner
Rio Cities
csoi...@riocities.net <mailto:csoi...@riocities.net>
505-966-6389 

On Jul 7, 2017, at 11:00 AM, James Wilson
<ja...@ridgecomms.com <mailto:ja...@ridgecomms.com>> wrote:

We just received an AC 'chiclet' that had 8.1.something on
it that wouldn't let us use an 8.0.2 (our current known
working version on all of our AC radios) configuration on
it.  And it wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up
the 8.0.2 configuration, put 8.3 on it, and back up a new
8.3 configuration. Fortunately we figured this out in the
office before we took it to the field.

8.3 does seem to be working so far, but all of these
firmware versions needing new configurations is almost as
bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams
<tomm...@digitex.net <mailto:tomm...@digitex.net>> wrote:

Welcome to UBNT.

---

Tommy Adams

Network Administrator

Digitex.com <http://Digitex.com>

817.558.6230 <tel:%28817%29%20558-6230> Voice

817.558.1204 <tel:%28817%29%20558-1204> Fax

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of
        *Jan-OOLLC
*Sent:* Friday, July 07, 2017 10:30 AM
*To:* ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
*Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING

How does something like this get out of the factory?

Jan V

On 07/07/2017 08:05 AM, RickG wrote:

Yup! Happened to me. Fortunately I was bench
testing ;)

On Fri, Jul 7, 2017 at 5:59 AM,
<mi...@abetterwireless.com
<mailto:mi...@abetterwireless.com>> wrote:

Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not
much help

Looks like truck rolls to change radios so be
careful

Mitch Koep

218-851-8689 <tel:%28218%29%20851-8689> cell

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mike Hammett 
What change is needed on how old of firmware? 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 

- Original Message -

From: "Mitch" <mi...@abetterwireless.com> 
To: "Ubiquiti Users Group" <ubnt_users@wispa.org> 
Sent: Friday, July 7, 2017 1:45:30 PM 
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING 


The latest reply from support 


Donald G. (Ubiquiti Networks) 
Jul 7, 08:33 PDT 
Hi Mitch, 

I can understand the concern but I'm not sure if there is going to be any 
changes made on the old firmwares. 

If you have any other questions, please let us know! 

Thanks! 



Donald G. 
Ubiquiti Networks 

On 7/7/2017 12:08 PM, James Wilson wrote: 




Thanks Chris, you may have just saved us from some misery! 



On Jul 7, 2017 1:02 PM, "Chris Soiles" < csoi...@riocities.net > wrote: 




I had an issue when upgrading to 8.3 is it deactivated UNII and didn't 
associate with the AP when it rebooted 


Sent from iPhone 6S Plus 



Chris Soiles 

Owner 

Rio Cities 
csoi...@riocities.net 
505-966-6389 


On Jul 7, 2017, at 11:00 AM, James Wilson < ja...@ridgecomms.com > wrote: 





We just received an AC 'chiclet' that had 8.1.something on it that wouldn't let 
us use an 8.0.2 (our current known working version on all of our AC radios) 
configuration on it. And it wouldn't let us put 8.0.2 on it! 


We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2 
configuration, put 8.3 on it, and back up a new 8.3 configuration. Fortunately 
we figured this out in the office before we took it to the field. 


8.3 does seem to be working so far, but all of these firmware versions needing 
new configurations is almost as bad as MikroTik! 








On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams < tomm...@digitex.net > wrote: 





Welcome to UBNT. 



--- 
Tommy Adams 
Network Administrator 
Digitex.com 

817.558.6230 Voice 
817.558.1204 Fax 





From: ubnt_users-boun...@wispa.org [mailto: ubnt_users-boun...@wispa.org ] On 
Behalf Of Jan-OOLLC 
Sent: Friday, July 07, 2017 10:30 AM 
To: ubnt_users@wispa.org 
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING 



How does something like this get out of the factory? 

Jan V 

On 07/07/2017 08:05 AM, RickG wrote: 



Yup! Happened to me. Fortunately I was bench testing ;) 



On Fri, Jul 7, 2017 at 5:59 AM, < mi...@abetterwireless.com > wrote: 


Everyone 

Heads up if you upgrade to 6.0.6 it will NOT allow 

you to down grade firmware and seems to break 

the LAN side of the radio. 

Allows POE but no data and no LAN Graph 

Have opened a support ticket but so far not much help 

Looks like truck rolls to change radios so be careful 

Mitch Koep 

218-851-8689 cell 

___ 
Ubnt_users mailing list 
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users 







-- 



-RickG 



___ Ubnt_users mailing list 
Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users 


___ Ubnt_users mailing list 
Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users 






___ Ubnt_users mailing list 
Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users 

___ Ubnt_users mailing list 
Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users 

___
Ubnt_users mailing list Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users 


___ 
Ubnt_users mailing list 
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users 

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mitch 

The latest reply from support


*Donald G.* (Ubiquiti Networks)

Jul 7, 08:33 PDT

Hi Mitch,

I can understand the concern but I'm not sure if there is going to be 
any changes made on the old firmwares.


If you have any other questions, please let us know!

Thanks!

Donald G.
Ubiquiti Networks


On 7/7/2017 12:08 PM, James Wilson wrote:

Thanks Chris, you may have just saved us from some misery!

On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net 
<mailto:csoi...@riocities.net>> wrote:


I had an issue when upgrading to 8.3 is it deactivated UNII and
didn't associate with the AP when it rebooted

Sent from iPhone 6S Plus
Chris Soiles
Owner
Rio Cities
csoi...@riocities.net <mailto:csoi...@riocities.net>
505-966-6389 

On Jul 7, 2017, at 11:00 AM, James Wilson <ja...@ridgecomms.com
<mailto:ja...@ridgecomms.com>> wrote:


We just received an AC 'chiclet' that had 8.1.something on it
that wouldn't let us use an 8.0.2 (our current known working
version on all of our AC radios) configuration on it.  And it
wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the
8.0.2 configuration, put 8.3 on it, and back up a new 8.3
configuration.  Fortunately we figured this out in the office
before we took it to the field.

8.3 does seem to be working so far, but all of these firmware
versions needing new configurations is almost as bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net
<mailto:tomm...@digitex.net>> wrote:

Welcome to UBNT.

---

Tommy Adams

Network Administrator

Digitex.com <http://Digitex.com>

817.558.6230 <tel:%28817%29%20558-6230> Voice

817.558.1204 <tel:%28817%29%20558-1204> Fax

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Jan-OOLLC
*Sent:* Friday, July 07, 2017 10:30 AM
        *To:* ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
*Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING

How does something like this get out of the factory?

Jan V

On 07/07/2017 08:05 AM, RickG wrote:

Yup! Happened to me. Fortunately I was bench testing ;)

On Fri, Jul 7, 2017 at 5:59 AM,
<mi...@abetterwireless.com
<mailto:mi...@abetterwireless.com>> wrote:

Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689 <tel:%28218%29%20851-8689> cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>



-- 


-RickG




___

Ubnt_users mailing list

Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>

___ Ubnt_users
mailing list Ubnt_users@wispa.org
<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users> 


___ Ubnt_users
mailing list Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users> 

___ Ubnt_users mailing
list Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users> 


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mitch 

The only way to get it on them is TFTP (according to support)


On 7/7/2017 11:59 AM, James Wilson wrote:
We just received an AC 'chiclet' that had 8.1.something on it that 
wouldn't let us use an 8.0.2 (our current known working version on all 
of our AC radios) configuration on it.  And it wouldn't let us put 
8.0.2 on it!


We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2 
configuration, put 8.3 on it, and back up a new 8.3 configuration.  
Fortunately we figured this out in the office before we took it to the 
field.


8.3 does seem to be working so far, but all of these firmware versions 
needing new configurations is almost as bad as MikroTik!





On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net 
<mailto:tomm...@digitex.net>> wrote:


Welcome to UBNT.

---

Tommy Adams

Network Administrator

Digitex.com

817.558.6230 <tel:%28817%29%20558-6230> Voice

817.558.1204 <tel:%28817%29%20558-1204> Fax

*From:*ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>
[mailto:ubnt_users-boun...@wispa.org
<mailto:ubnt_users-boun...@wispa.org>] *On Behalf Of *Jan-OOLLC
*Sent:* Friday, July 07, 2017 10:30 AM
*To:* ubnt_users@wispa.org <mailto:ubnt_users@wispa.org>
    *Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING

How does something like this get out of the factory?

Jan V

On 07/07/2017 08:05 AM, RickG wrote:

Yup! Happened to me. Fortunately I was bench testing ;)

On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com
<mailto:mi...@abetterwireless.com>> wrote:

Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689 <tel:%28218%29%20851-8689> cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>



-- 


-RickG




___

Ubnt_users mailing list

Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>

http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users>

___ Ubnt_users mailing
list Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
<http://lists.wispa.org/mailman/listinfo/ubnt_users> 


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread James Wilson 
Thanks Chris, you may have just saved us from some misery!

On Jul 7, 2017 1:02 PM, "Chris Soiles" <csoi...@riocities.net> wrote:

I had an issue when upgrading to 8.3 is it deactivated UNII and didn't
associate with the AP when it rebooted

Sent from iPhone 6S Plus

Chris Soiles
Owner
Rio Cities
csoi...@riocities.net
505-966-6389

On Jul 7, 2017, at 11:00 AM, James Wilson <ja...@ridgecomms.com> wrote:

We just received an AC 'chiclet' that had 8.1.something on it that wouldn't
let us use an 8.0.2 (our current known working version on all of our AC
radios) configuration on it.  And it wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2
configuration, put 8.3 on it, and back up a new 8.3 configuration.
Fortunately we figured this out in the office before we took it to the
field.

8.3 does seem to be working so far, but all of these firmware versions
needing new configurations is almost as bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net> wrote:

> Welcome to UBNT.
>
>
>
>
>
> ---
>
> Tommy Adams
>
> Network Administrator
>
> Digitex.com
>
>
>
> 817.558.6230 <(817)%20558-6230> Voice
>
> 817.558.1204 <(817)%20558-1204> Fax
>
>
>
>
>
>
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> *On Behalf Of *Jan-OOLLC
> *Sent:* Friday, July 07, 2017 10:30 AM
> *To:* ubnt_users@wispa.org
> *Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING
>
>
>
> How does something like this get out of the factory?
>
> Jan V
>
> On 07/07/2017 08:05 AM, RickG wrote:
>
> Yup! Happened to me. Fortunately I was bench testing ;)
>
>
>
> On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com> wrote:
>
> Everyone
>
> Heads up if you upgrade to 6.0.6 it will NOT allow
>
> you to down grade firmware and seems to break
>
> the LAN side of the radio.
>
> Allows POE but no data and no LAN Graph
>
> Have opened a support ticket but so far not much help
>
> Looks like truck rolls to change radios so be careful
>
> Mitch Koep
>
> 218-851-8689 <(218)%20851-8689> cell
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
>
>
> --
>
> -RickG
>
>
>
>
> ___
>
> Ubnt_users mailing list
>
> Ubnt_users@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Tommy Adams 
Welcome to UBNT.

 

 

---

Tommy Adams

Network Administrator

Digitex.com

 

817.558.6230 Voice

817.558.1204 Fax

 

 

 

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Jan-OOLLC
Sent: Friday, July 07, 2017 10:30 AM
To: ubnt_users@wispa.org
Subject: Re: [Ubnt_users] UBNT 6.0.6 WARNING

 

How does something like this get out of the factory?

Jan V

On 07/07/2017 08:05 AM, RickG wrote:

Yup! Happened to me. Fortunately I was bench testing ;)

 

On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com 
<mailto:mi...@abetterwireless.com> > wrote:

Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689 cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> 
http://lists.wispa.org/mailman/listinfo/ubnt_users





 

-- 

-RickG






___
Ubnt_users mailing list
Ubnt_users@wispa.org <mailto:Ubnt_users@wispa.org> 
http://lists.wispa.org/mailman/listinfo/ubnt_users

 

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Chris Soiles 
I had an issue when upgrading to 8.3 is it deactivated UNII and didn't
associate with the AP when it rebooted

Sent from iPhone 6S Plus

Chris Soiles
Owner
Rio Cities
csoi...@riocities.net
505-966-6389

On Jul 7, 2017, at 11:00 AM, James Wilson <ja...@ridgecomms.com> wrote:

We just received an AC 'chiclet' that had 8.1.something on it that wouldn't
let us use an 8.0.2 (our current known working version on all of our AC
radios) configuration on it.  And it wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2
configuration, put 8.3 on it, and back up a new 8.3 configuration.
Fortunately we figured this out in the office before we took it to the
field.

8.3 does seem to be working so far, but all of these firmware versions
needing new configurations is almost as bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net> wrote:

> Welcome to UBNT.
>
>
>
>
>
> ---
>
> Tommy Adams
>
> Network Administrator
>
> Digitex.com
>
>
>
> 817.558.6230 <(817)%20558-6230> Voice
>
> 817.558.1204 <(817)%20558-1204> Fax
>
>
>
>
>
>
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> *On Behalf Of *Jan-OOLLC
> *Sent:* Friday, July 07, 2017 10:30 AM
> *To:* ubnt_users@wispa.org
> *Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING
>
>
>
> How does something like this get out of the factory?
>
> Jan V
>
> On 07/07/2017 08:05 AM, RickG wrote:
>
> Yup! Happened to me. Fortunately I was bench testing ;)
>
>
>
> On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com> wrote:
>
> Everyone
>
> Heads up if you upgrade to 6.0.6 it will NOT allow
>
> you to down grade firmware and seems to break
>
> the LAN side of the radio.
>
> Allows POE but no data and no LAN Graph
>
> Have opened a support ticket but so far not much help
>
> Looks like truck rolls to change radios so be careful
>
> Mitch Koep
>
> 218-851-8689 <(218)%20851-8689> cell
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
>
>
> --
>
> -RickG
>
>
>
>
> ___
>
> Ubnt_users mailing list
>
> Ubnt_users@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread James Wilson 
We just received an AC 'chiclet' that had 8.1.something on it that wouldn't
let us use an 8.0.2 (our current known working version on all of our AC
radios) configuration on it.  And it wouldn't let us put 8.0.2 on it!

We had to find a PBE 5 AC radio, put 8.0.2 on it, load up the 8.0.2
configuration, put 8.3 on it, and back up a new 8.3 configuration.
Fortunately we figured this out in the office before we took it to the
field.

8.3 does seem to be working so far, but all of these firmware versions
needing new configurations is almost as bad as MikroTik!




On Fri, Jul 7, 2017 at 12:47 PM, Tommy Adams <tomm...@digitex.net> wrote:

> Welcome to UBNT.
>
>
>
>
>
> ---
>
> Tommy Adams
>
> Network Administrator
>
> Digitex.com
>
>
>
> 817.558.6230 <(817)%20558-6230> Voice
>
> 817.558.1204 <(817)%20558-1204> Fax
>
>
>
>
>
>
>
> *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org]
> *On Behalf Of *Jan-OOLLC
> *Sent:* Friday, July 07, 2017 10:30 AM
> *To:* ubnt_users@wispa.org
> *Subject:* Re: [Ubnt_users] UBNT 6.0.6 WARNING
>
>
>
> How does something like this get out of the factory?
>
> Jan V
>
> On 07/07/2017 08:05 AM, RickG wrote:
>
> Yup! Happened to me. Fortunately I was bench testing ;)
>
>
>
> On Fri, Jul 7, 2017 at 5:59 AM, <mi...@abetterwireless.com> wrote:
>
> Everyone
>
> Heads up if you upgrade to 6.0.6 it will NOT allow
>
> you to down grade firmware and seems to break
>
> the LAN side of the radio.
>
> Allows POE but no data and no LAN Graph
>
> Have opened a support ticket but so far not much help
>
> Looks like truck rolls to change radios so be careful
>
> Mitch Koep
>
> 218-851-8689 <(218)%20851-8689> cell
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
>
>
> --
>
> -RickG
>
>
>
>
> ___
>
> Ubnt_users mailing list
>
> Ubnt_users@wispa.org
>
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Jan-OOLLC 

How does something like this get out of the factory?

Jan V

On 07/07/2017 08:05 AM, RickG wrote:

Yup! Happened to me. Fortunately I was bench testing ;)

On Fri, Jul 7, 2017 at 5:59 AM, > wrote:


Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689 cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





--
-RickG


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread RickG 
Yup! Happened to me. Fortunately I was bench testing ;)

On Fri, Jul 7, 2017 at 5:59 AM,  wrote:

> Everyone
>
> Heads up if you upgrade to 6.0.6 it will NOT allow
>
> you to down grade firmware and seems to break
>
> the LAN side of the radio.
>
> Allows POE but no data and no LAN Graph
>
> Have opened a support ticket but so far not much help
>
> Looks like truck rolls to change radios so be careful
>
> Mitch Koep
>
> 218-851-8689 cell
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>



-- 
-RickG
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mitch 

Looks like 6.0.4 is the last down gradable firmware

Going to be very hard to even test new betas without a truck roll

to TFTP it back if it does not work


On 7/7/2017 9:42 AM, Josh Luthman wrote:
Gotta keep them people from elevating...didn't see that one coming a 
mile away.



Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373

On Fri, Jul 7, 2017 at 10:31 AM, Mitch > wrote:


Here is UBNT reply

Hi Mitch,

Thanks for the remote access!

There are some changes in v6.0.6. Here is the part of change log:

6.0.6 (XM/XW/TI) Changelog / July 5, 2017

New:
- Signed firmware support
- Upgrade libpcap to 1.8.1
- Additional statistics for AC2 agent


V6.0.6 only support signed firmware support that's the reason
we're getting that error while downgrading the firmware via GUI.
However, you can downgrade the firmware via TFTP.

Thanks!

Donald G.
Ubiquiti Networks


So no you cannot down grade below 6.0.6

Mitch Koep

218-851-8689  cell


On 7/7/2017 9:22 AM, Mimbres Communications wrote:


https://community.ubnt.com/t5/airMAX-M-Beta/Limit-on-downgrades-from-6-0-6Beta/m-p/1945657#M26903


seems to indicate you should be able to downgrade to an earlier
6.0 FW version, then again from there if needed.

On Fri, Jul 7, 2017 at 3:58 AM, > wrote:

Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689  cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





-- 
Kurt Albershardt  |  Mimbres Communications, LLC  |575-342-0042 



___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users


___ Ubnt_users mailing
list Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users
 


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mitch 

Here is UBNT reply

Hi Mitch,

Thanks for the remote access!

There are some changes in v6.0.6. Here is the part of change log:

6.0.6 (XM/XW/TI) Changelog / July 5, 2017

New:
- Signed firmware support
- Upgrade libpcap to 1.8.1
- Additional statistics for AC2 agent


V6.0.6 only support signed firmware support that's the reason we're 
getting that error while downgrading the firmware via GUI. However, you 
can downgrade the firmware via TFTP.


Thanks!

Donald G.
Ubiquiti Networks


So no you cannot down grade below 6.0.6

Mitch Koep

218-851-8689 cell


On 7/7/2017 9:22 AM, Mimbres Communications wrote:
https://community.ubnt.com/t5/airMAX-M-Beta/Limit-on-downgrades-from-6-0-6Beta/m-p/1945657#M26903 
seems to indicate you should be able to downgrade to an earlier 6.0 FW 
version, then again from there if needed.


On Fri, Jul 7, 2017 at 3:58 AM, > wrote:


Everyone

Heads up if you upgrade to 6.0.6 it will NOT allow

you to down grade firmware and seems to break

the LAN side of the radio.

Allows POE but no data and no LAN Graph

Have opened a support ticket but so far not much help

Looks like truck rolls to change radios so be careful

Mitch Koep

218-851-8689  cell

___
Ubnt_users mailing list
Ubnt_users@wispa.org 
http://lists.wispa.org/mailman/listinfo/ubnt_users





--
Kurt Albershardt  |  Mimbres Communications, LLC  |  575-342-0042


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] UBNT 6.0.6 WARNING

2017-07-07 Thread Mimbres Communications 
https://community.ubnt.com/t5/airMAX-M-Beta/Limit-on-downgrades-from-6-0-6Beta/m-p/1945657#M26903
seems to indicate you should be able to downgrade to an earlier 6.0 FW
version, then again from there if needed.

On Fri, Jul 7, 2017 at 3:58 AM,  wrote:

> Everyone
>
> Heads up if you upgrade to 6.0.6 it will NOT allow
>
> you to down grade firmware and seems to break
>
> the LAN side of the radio.
>
> Allows POE but no data and no LAN Graph
>
> Have opened a support ticket but so far not much help
>
> Looks like truck rolls to change radios so be careful
>
> Mitch Koep
>
> 218-851-8689 cell
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>



-- 

Kurt Albershardt  |  Mimbres Communications, LLC  |  575-342-0042
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users