[Bug 1549971] Re: dock_applet.py crashed with UnboundLocalError in get_cmdline_from_pid(): local variable 'line' referenced before assignment
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: mate-dock-applet (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1549971 Title: dock_applet.py crashed with UnboundLocalError in get_cmdline_from_pid(): local variable 'line' referenced before assignment To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mate-dock-applet/+bug/1549971/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1767808] Re: "drm timed out" with driver i915 + Intel Mobile GM965/GL960 Integrated Graphics with Kernel 4.15
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1767808 Title: "drm timed out" with driver i915 + Intel Mobile GM965/GL960 Integrated Graphics with Kernel 4.15 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1767808/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 994710] Re: i am having problem in bootloader as i have more than one os.
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: grub-installer (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/994710 Title: i am having problem in bootloader as i have more than one os. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/994710/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1805433] Re: Call trace in dmesg (need to specify later what this is)
$ yes '' | make localmodconfig $ make -j`nproc` deb-pkg Then the kernel should be built as Debian Package. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1805433 Title: Call trace in dmesg (need to specify later what this is) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1805433/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1802712] Re: Doesn't work a touchpad on Lenovo 330-15IGM 81d1
The touchpad works fine on linux kernel v4.18.19 and more -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1802712 Title: Doesn't work a touchpad on Lenovo 330-15IGM 81d1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1802712/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808669] [NEW] package hunspell-en-ca 1:2017.08.24 failed to install/upgrade: O pacote está num mau estado de inconsistência; deve reinstala-lo antes de tentar configura-lo.
Public bug reported: apparently, the dpkg is with a fatal error: dpkg: error to process the package hunspell-en-ca (--configure): the package is in bad state of inconsistency; Errors were encountered while processing: hunspell-en-ca E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 18.04 Package: hunspell-en-ca 1:2017.08.24 ProcVersionSignature: Ubuntu 4.15.0-42.45-generic 4.15.18 Uname: Linux 4.15.0-42-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.5 AptOrdering: gnome-software-plugin-snap:amd64: Install gnome-software:amd64: Install gnome-software-common:amd64: Install unattended-upgrades:amd64: Install NULL: ConfigurePending Architecture: amd64 Date: Sun Dec 16 03:01:20 2018 ErrorMessage: O pacote está num mau estado de inconsistência; deve reinstala-lo antes de tentar configura-lo. PackageArchitecture: all Python3Details: /usr/bin/python3.6, Python 3.6.7, python3-minimal, 3.6.7-1~18.04 PythonDetails: /usr/bin/python2.7, Python 2.7.15rc1, python-minimal, 2.7.15~rc1-1 RelatedPackageVersions: dpkg 1.19.0.5ubuntu2.1 apt 1.6.6 SourcePackage: scowl Title: package hunspell-en-ca 1:2017.08.24 failed to install/upgrade: O pacote está num mau estado de inconsistência; deve reinstala-lo antes de tentar configura-lo. UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: scowl (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808669 Title: package hunspell-en-ca 1:2017.08.24 failed to install/upgrade: O pacote está num mau estado de inconsistência; deve reinstala-lo antes de tentar configura-lo. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/scowl/+bug/1808669/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1754294] Re: After last updated libcurl3 on libcurl4, some apps are removed.
I am also affected by this problem. Made a workaround by downloading curl3 and passing it manually to anything that needs it. (Replace the original with a shell script that calls this.) `LD_LIBRARY_PATH=$HOME/mylib/curl3:$LD_LIBRARY_PATH application_name` -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1754294 Title: After last updated libcurl3 on libcurl4, some apps are removed. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/curl/+bug/1754294/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1807511] Re: AMDGPU Radeon RX540 system freezes poor performance with ac adapter plugged in
Please file an upstream bug at https://bugs.freedesktop.org/ Product: DRI Component: DRM/amdgpu And attach dmesg in comment #20. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1807511 Title: AMDGPU Radeon RX540 system freezes poor performance with ac adapter plugged in To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1807511/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808183] Re: ASPEED server console output extremely slow after upgrade to 18.04
Seems like this commit fixes the issue: commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a Author: Thomas Zimmermann Date: Thu Nov 15 11:42:16 2018 +0100 drm/ast: Remove existing framebuffers before loading driver If vesafb attaches to the AST device, it configures the framebuffer memory for uncached access by default. When ast.ko later tries to attach itself to the device, it wants to use write-combining on the framebuffer memory, but vesefb's existing configuration for uncached access takes precedence. This results in reduced performance. Removing the framebuffer's configuration before loding the AST driver fixes the problem. Other DRM drivers already contain equivalent code. Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 Signed-off-by: Thomas Zimmermann Cc: Tested-by: Y.C. Chen Reviewed-by: Jean Delvare Tested-by: Jean Delvare Signed-off-by: Dave Airlie I built a kernel [1] with the commit, please test it. [1] https://people.canonical.com/~khfeng/lp1808183/ ** Bug watch added: bugzilla.opensuse.org/ #1112963 https://bugzilla.opensuse.org/show_bug.cgi?id=1112963 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808183 Title: ASPEED server console output extremely slow after upgrade to 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808183/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790586] Re: The proposed grub package in Trusty / Bionic overrides the boot order on a MaaS deployed system
[Expired for grub2 (Ubuntu) because there has been no activity for 60 days.] ** Changed in: grub2 (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790586 Title: The proposed grub package in Trusty / Bionic overrides the boot order on a MaaS deployed system To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1790586/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1796076] Re: package shim-signed 1.37~18.04.2+15+1533136590.3beb971-0ubuntu1 failed to install/upgrade: problemas de dependencias - se deja sin configurar
[Expired for grub2 (Ubuntu) because there has been no activity for 60 days.] ** Changed in: grub2 (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1796076 Title: package shim-signed 1.37~18.04.2+15+1533136590.3beb971-0ubuntu1 failed to install/upgrade: problemas de dependencias - se deja sin configurar To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1796076/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1794844] Re: Calamares crashes in calamares/modules/automirror/main.py in run() country = getcountry() with urlopen error [Errno 0] Error
[Expired for calamares-settings-ubuntu (Ubuntu) because there has been no activity for 60 days.] ** Changed in: calamares-settings-ubuntu (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1794844 Title: Calamares crashes in calamares/modules/automirror/main.py in run() country = getcountry() with urlopen error [Errno 0] Error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/calamares-settings-ubuntu/+bug/1794844/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1774934] Re: package mariadb-common 10.1.30-0ubuntu0.17.10.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
[Expired for mariadb-10.1 (Ubuntu) because there has been no activity for 60 days.] ** Changed in: mariadb-10.1 (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1774934 Title: package mariadb-common 10.1.30-0ubuntu0.17.10.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mariadb-10.1/+bug/1774934/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1798215] Re: No idea
[Expired for Ubuntu because there has been no activity for 60 days.] ** Changed in: ubuntu Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1798215 Title: No idea To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1798215/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1798160] Re: Wrong screen refresh AOC G2260VWQ6
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1798160 Title: Wrong screen refresh AOC G2260VWQ6 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798160/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1797805] Re: After Update to Ubuntu 18.04.1 LTS Libre Base wont open database
[Expired for libreoffice (Ubuntu) because there has been no activity for 60 days.] ** Changed in: libreoffice (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1797805 Title: After Update to Ubuntu 18.04.1 LTS Libre Base wont open database To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1797805/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1798082] Re: package linux-image-4.15.0-34-generic 4.15.0-34.37 failed to install/upgrade: installed linux-image-4.15.0-34-generic package pre-removal script subprocess returned error exit status
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1798082 Title: package linux-image-4.15.0-34-generic 4.15.0-34.37 failed to install/upgrade: installed linux-image-4.15.0-34-generic package pre- removal script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1798082/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1798068] Re: galternatives crashes on start
[Expired for galternatives (Ubuntu) because there has been no activity for 60 days.] ** Changed in: galternatives (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1798068 Title: galternatives crashes on start To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/galternatives/+bug/1798068/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808666] [NEW] Ubuntu18 installation as virtual machine in virtualbox
Public bug reported: Attempted to install Ubuntu18.04.1-desktop-amd64.iso as a virtual machine (VirtualBox Version 5.1.26 r117224). Installation fails. More information may follow. ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubiquity 18.04.14.6 ProcVersionSignature: Ubuntu 4.15.0-29.31-generic 4.15.18 Uname: Linux 4.15.0-29-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 CasperVersion: 1.394 CurrentDesktop: ubuntu:GNOME Date: Sun Dec 16 03:55:51 2018 InstallCmdLine: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --- maybe-ubiquity LiveMediaBuild: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic ubiquity-18.04.14.6 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808666 Title: Ubuntu18 installation as virtual machine in virtualbox To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1808666/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766945] Re: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure
** Changed in: ubiquity (Ubuntu) Assignee: fahimfaezabir (abir032) => shaik shoyab azmal (shoyab) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766945 Title: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/partman-auto/+bug/1766945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808664] [NEW] pulse udio is not starting automatically at boot
Public bug reported: Pulseaudio is not getting loaded at the time of boot and it has to be manually started each time ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: pulseaudio 1:11.1-1ubuntu7.1 ProcVersionSignature: Ubuntu 4.15.0-42.45-generic 4.15.18 Uname: Linux 4.15.0-42-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version k4.15.0-42-generic. ApportVersion: 2.20.9-0ubuntu7.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: murtyvonna 2094 F pulseaudio /dev/snd/controlC0: murtyvonna 2094 F pulseaudio Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xf7f1 irq 34' Mixer name : 'Realtek ALC892' Components : 'HDA:10ec0892,1043841b,00100302 HDA:80862806,80860101,0010' Controls : 65 Simple ctrls : 24 Card1.Amixer.info: Card hw:1 'U0x46d0x825'/'USB Device 0x46d:0x825 at usb-:00:14.0-1, high speed' Mixer name : 'USB Mixer' Components : 'USB046d:0825' Controls : 3 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined Capture channels: Mono Limits: Capture 0 - 15 Mono: Capture 0 [0%] [8.00dB] [on] CurrentDesktop: ubuntu:GNOME Date: Sun Dec 16 08:19:23 2018 InstallationDate: Installed on 2018-08-06 (131 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426) ProcEnviron: LANGUAGE=en_US PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN SHELL=/bin/bash SourcePackage: pulseaudio UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 03/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 1402 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-V LK dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1402:bd03/21/2014:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-VLK:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer ** Affects: pulseaudio (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808664 Title: pulse udio is not starting automatically at boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1808664/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766945] Re: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure
TLDR: the Xubuntu 18.04.1 installer does not recognize an NTFS EFI partition. Then the process takes it course and fails. Longer story. I recently staged two dual boot machines from scratch. The only difference between them was the EFI partition. Case 1: * Laptop came with Windows 10 pre-installed * Resized Windows partition * Booted with USB. Xubuntu installer offered choice of installing along existing Windows system and everything worked like a charm. KUDOS TO THE DEVELOPERS OF THE XUBUNTU INSTALLER. Case 2: * Restaged desktop that had a Windows 10 digital license on blank SSD * Resized Windows partition * Booted with USB. Xubuntu installer did not offer choice of installing along existing Windows system * STOPPED. Compared the two cases and found the difference: the fresh Windows 10 install (using 1809 media) set the desktop up with an NTFS EFI partition (at least so says gparted). * Rebooted with USB. In Xubuntu installer chose "Something else", selected the free space on the disk to create a new partition and let the installer go * The installer failed when trying to install grub-efi I will still make some attempts at fixing this, and will post here if I find something new. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766945 Title: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/partman-auto/+bug/1766945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1786876] Re: I can't upgrade to Bionic Beaver
I can't fix it yet. Em Sáb, 15 de dez de 2018 21:35, trisha g <1786...@bugs.launchpad.net escreveu: > so how does this issue get fixed?? > > -- > You received this bug notification because you are subscribed to the bug > report. > https://bugs.launchpad.net/bugs/1786876 > > Title: > I can't upgrade to Bionic Beaver > > Status in ubuntu-release-upgrader package in Ubuntu: > Invalid > > Bug description: > when I try upgrade to Ubuntu 18.04 from 16.04 the upgrade software stop > and show the message "There is a unsolve problem, an error occurred while > calculating the update.". After three possible cause are showed: > Upgrade to a pre-release > to run from the pre-release version > Use non-official ubuntu package. > > Neither above are applicable to me. > > ProblemType: Bug > DistroRelease: Ubuntu 16.04 > Package: ubuntu-release-upgrader-core 1:16.04.25 > ProcVersionSignature: Ubuntu 4.15.0-30.32~16.04.1-generic 4.15.18 > Uname: Linux 4.15.0-30-generic x86_64 > ApportVersion: 2.20.1-0ubuntu2.18 > Architecture: amd64 > CrashDB: ubuntu > CurrentDesktop: KDE > Date: Mon Aug 13 22:30:11 2018 > InstallationDate: Installed on 2017-04-01 (499 days ago) > InstallationMedia: Kubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 > (20170215) > PackageArchitecture: all > SourcePackage: ubuntu-release-upgrader > UpgradeStatus: Upgraded to xenial on 2018-08-14 (0 days ago) > VarLogDistupgradeTermlog: > > To manage notifications about this bug go to: > > https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1786876/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1786876 Title: I can't upgrade to Bionic Beaver To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1786876/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1678184] Re: APST quirk needed for Samsung 512GB NVMe drive
I was experiencing this issue for around 1 year, always repeated irregularly. Allienware 13 with Samsung SDD. Over 7 times reinstallation, changed SSD twice. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1678184 Title: APST quirk needed for Samsung 512GB NVMe drive To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678184/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808379] Re: Apache won't start, in version 2.4.10 (trusty-backports) update
I was not able to downgrade (force version) in synaptic apache2, though selected it did nothing. So I had to remove: apache2 apache2-mpm-prefork libapache2-mod-php5 virtualmin-lamp-stack I could not reinstall as I got these errors: apache2: Depends: apache2-bin (=2.4.7-1ubuntu4.20) but 2.4.10-1ubuntu1.1~ubuntu14.04.2 is to be installed Depends: apache2-data (=2.4.7-1ubuntu4.20) but 2.4.10-1ubuntu1.1~ubuntu14.04.2 is to be installed downgrade (force version) I was able to downgrade (force version), apache2-bin, and apache2-data. Then I was able to reinstall, apache2, apache2-mpm-prefork, libapache2-mod-php5, virtualmin-lamp-stack. Apache2 started right up after undoing the previous dpkg config done by the backport Apache2 2.4.10-1ubuntu1.1~ubuntu14.04.2 version during the reinstall. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808379 Title: Apache won't start, in version 2.4.10 (trusty-backports) update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apache2/+bug/1808379/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Oops. I had previously turned off my printer. Now, with the printer on: kim@kim-MS-7865:/usr/lib/cups/backend$ /usr/lib/cups/backend/cnijnet network cnijnet:/00-1E-8F-74-5A-78 "Canon MX860 series" "Canon-MX860-series_00-1E-8F-74-5A-78" kim@kim-MS-7865:/usr/lib/cups/backend$ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808658] Re: gdm3 crashes after (and sometimes before) login with nvidia-driver-390 and a gtx 970m
** Description changed: + After entering username and password, gnome3 never loads, and instead + you are stuck on a blank screen. Switching tty doesn't work. Sometimes + gdm3 doesn't even load and the blank screen happens before you can try + to log in. Without a workaround, you are forced to boot into recovery + mode and purge nvidia, reverting back to nouveau. + At first glance, this seems similar to this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics- drivers-390/+bug/1752053/+index?comments=all However, none of the solutions listed there work and the workaround is to use lightdm instead of gdm3: sudo apt install lightdm - If it doesn't ask you to set the default display manager, then do this after, and set lightdm as the default: + If it doesn't ask you to set the default display manager, then do this after, and set lightdm as the default when prompted: sudo dpkg-reconfigure gdm3 After that, the system will boot and let you log in normally. This problem is happening on a Clevo laptop without Optimus, with a - discrete nvidia gtx 970m device, after installing any of the modern + dedicated nvidia gtx 970m device, after installing any of the modern nvidia drivers from version 390 onward, from the official repo, from the graphics PPA, and I presume also the official driver from the nvidia - site. It happens on both Ubuntu 18.04.1 + updates, and Ubuntu 18.10 + - updates. + site. + + I tested on both Ubuntu 18.04.1 + updates, and Ubuntu 18.10 + updates. I tested with nvidia driver versions 390, 396, and 415. gdm3 works fine until you install the nvidia driver. ** Summary changed: - gdm3 crashes after (and sometimes before) login with nvidia-driver-390 and a gtx 970m + display goes blank and system hangs after (and sometimes before) gdm3 login with nvidia-driver-390 and a gtx 970m -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808658 Title: display goes blank and system hangs after (and sometimes before) gdm3 login with nvidia-driver-390 and a gtx 970m To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1808658/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Forget the last post, please. It's in the error_log. -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1786876] Re: I can't upgrade to Bionic Beaver
when I try upgrade to Ubuntu 18.04 from 16.04 the upgrade software stop and show the message "There is a unsolve problem, an error occurred while calculating the update.". After three possible cause are showed: Upgrade to a pre-release to run from the pre-release version Use non-official ubuntu package. Neither above are applicable to me. How to fix?? ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubuntu-release-upgrader-core 1:16.04.25 ProcVersionSignature: Ubuntu 4.15.0-30.32~16.04.1-generic 4.15.18 Uname: Linux 4.15.0-30-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.18 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: KDE Date: Mon Aug 13 22:30:11 2018 InstallationDate: Installed on 2017-04-01 (499 days ago) InstallationMedia: Kubuntu 16.04.2 LTS "Xenial Xerus" - Release amd64 (20170215) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader UpgradeStatus: Upgraded to xenial on 2018-08-14 (0 days ago) VarLogDistupgradeTermlog: ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: Confirmed => Invalid ** Converted to question: https://answers.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+question/676826 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1786876 Title: I can't upgrade to Bionic Beaver To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1786876/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808657] Re: Ubiquity fails to boot when selecting the Try Kubuntu (live session).
Another note, in the last 2 years, Ubiquity has never booted correctly on this hardware so this problem is not something new. I never realized the issue was ubiquity until today. (Neon live booted on this laptop without requiring nomodeset and thus provided the ubiquity clue as Neon does not use ubiqutiy). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808657 Title: Ubiquity fails to boot when selecting the Try Kubuntu (live session). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1808657/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1786876] Re: I can't upgrade to Bionic Beaver
so how does this issue get fixed?? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1786876 Title: I can't upgrade to Bionic Beaver To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1786876/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1786876] Re: I can't upgrade to Bionic Beaver
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1786876 Title: I can't upgrade to Bionic Beaver To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1786876/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808657] Re: Ubiquity fails to boot when selecting the Try Kubuntu (live session).
Removing the maybe-ubiquity from the boot params, booted to live session 3 out 3 attempts. Sometimes the ubiquity boot will fail before the Try/Install menu is displayed as shown in the attachment. And it on this hybrid hardware, Try Kubuntu option always fails (assuming the ubiquity reaches that point). ** Attachment added: "Picture of ubiquity boot failure." https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1808657/+attachment/5222618/+files/20181215_161532.jpg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808657 Title: Ubiquity fails to boot when selecting the Try Kubuntu (live session). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1808657/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Apologies for the typos. The error_log has [Job 477] PID 5588 (/usr/lib/cups/backend/cnijnet) exited with no errors. But you get no output. What is your CUPS version? -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808657] [NEW] Ubiquity fails to boot when selecting the Try Kubuntu (live session).
Public bug reported: When booting to a live usb via UEFI boot on a hybrid Dell Inspiron 7559 laptop (Intel/Nvidia), the Try "Kubuntu option" hangs. If maybe- ubiquity is removed from the boot parameters, the laptop will live boot without issue. Proceeding directly to install works fine. Another workaround is to add "nomodeset" to the boot parameters. But nomodeset forces a VGA boot. VGA on a 4k screen provides a very poor Live session experience. I will reboot again with quiet mode disabled to see if any additional errors are displayed. ProblemType: Bug DistroRelease: Ubuntu 19.04 Package: ubiquity 19.04.3.1 ProcVersionSignature: Ubuntu 4.18.0-11.12-generic 4.18.12 Uname: Linux 4.18.0-11-generic x86_64 ApportVersion: 2.20.10-0ubuntu14 Architecture: amd64 CasperVersion: 1.401 CurrentDesktop: KDE Date: Sat Dec 15 22:54:40 2018 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper quiet splash --- LiveMediaBuild: Kubuntu 19.04 "Disco Dingo" - Alpha amd64 (20181214) SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug disco kubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808657 Title: Ubiquity fails to boot when selecting the Try Kubuntu (live session). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1808657/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808658] [NEW] gdm3 crashes after (and sometimes before) login with nvidia-driver-390 and a gtx 970m
Public bug reported: At first glance, this seems similar to this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics- drivers-390/+bug/1752053/+index?comments=all However, none of the solutions listed there work and the workaround is to use lightdm instead of gdm3: sudo apt install lightdm If it doesn't ask you to set the default display manager, then do this after, and set lightdm as the default: sudo dpkg-reconfigure gdm3 After that, the system will boot and let you log in normally. This problem is happening on a Clevo laptop without Optimus, with a discrete nvidia gtx 970m device, after installing any of the modern nvidia drivers from version 390 onward, from the official repo, from the graphics PPA, and I presume also the official driver from the nvidia site. It happens on both Ubuntu 18.04.1 + updates, and Ubuntu 18.10 + updates. I tested with nvidia driver versions 390, 396, and 415. gdm3 works fine until you install the nvidia driver. ** Affects: gdm3 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808658 Title: gdm3 crashes after (and sometimes before) login with nvidia-driver-390 and a gtx 970m To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1808658/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
I get no output. It runs for about 5 seconds and returns to the prompt: kim@kim-MS-7865:/usr/lib/cups/backend$ /usr/lib/cups/backend/cnijnet kim@kim-MS-7865:/usr/lib/cups/backend$ Note that I changed the executable file name. I could not fine either cnijjet or cnijet. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791427] Re: Touchpad and/or trackpoint stop working after S3 suspend on Lenovo X1 Carbon 6th
Hi, thanks for the reply. The touchpad stopped working and was completely unresponsive and was reactivated by the subsequent suspend/resume. (The trackpoint was working all the time) Is there an advanced logging which i could activate? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791427 Title: Touchpad and/or trackpoint stop working after S3 suspend on Lenovo X1 Carbon 6th To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791427/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
It seems that the only way to contact the printer is with the cnijjet backend. One last last thing if you would: execute /usr/lib/cups/backend/cnijet and give us the output. Thanks for your co-operation. Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1793780] Re: Clipit broken on Cosmic
Also, I'm not able to use CLIPIT app on my ubuntu 18.10. I would like to know when will fix this issue? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1793780 Title: Clipit broken on Cosmic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clipit/+bug/1793780/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1752165] Re: TB16 dock freezes X on hotplug when used with external displays
Still seems to be an issue; I tried 4.18.16 on 18.10 and it didn't help (nor did the most recent 4.19 kernel in UKUU). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1752165 Title: TB16 dock freezes X on hotplug when used with external displays To manage notifications about this bug go to: https://bugs.launchpad.net/dell-sputnik/+bug/1752165/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785600] Re: Natural scrolling is only applied in one direction (vertical)
It can be fixed following the instructions in this answer: https://askubuntu.com/questions/1029128/inverted-horizontal-scrolling-ubuntu-18-04#answer-1031657 I've had the problem before. It seems like a weird why-bother-choice by the community / Canonical. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785600 Title: Natural scrolling is only applied in one direction (vertical) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1785600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1210607] Re: Scientific Notation not given proper order of operations
Upstream bug now at https://gitlab.gnome.org/GNOME/gnome- calculator/issues/26 ** Tags removed: raring ** Tags added: bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1210607 Title: Scientific Notation not given proper order of operations To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-calculator/+bug/1210607/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 752542] Re: ACPI DSDT info
Information for the PC Specialist Cosmos VII laptop (https://www.pcspecialist.co.uk/notebooks/cosmosVII-15/), with GTX 1050 GPU. ** Attachment added: "PC_Specialist_LTD-N8xEJEK.tar.gz" https://bugs.launchpad.net/lpbugreporter/+bug/752542/+attachment/5222611/+files/PC_Specialist_LTD-N8xEJEK.tar.gz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/752542 Title: ACPI DSDT info To manage notifications about this bug go to: https://bugs.launchpad.net/bumblebee/+bug/752542/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808638] Re: Tap-to-Click at login screen for principle of least astonishment (POLA)
Migrated upstream to: https://gitlab.gnome.org/GNOME/gsettings-desktop- schemas/issues/4 ** Changed in: gdm Importance: Medium => Undecided ** Changed in: gdm Status: Expired => New ** Changed in: gdm Remote watch: GNOME Bug Tracker #785855 => None -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808638 Title: Tap-to-Click at login screen for principle of least astonishment (POLA) To manage notifications about this bug go to: https://bugs.launchpad.net/gdm/+bug/1808638/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785600] Re: Natural scrolling is only applied in one direction (vertical)
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: gnome-shell (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785600 Title: Natural scrolling is only applied in one direction (vertical) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1785600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1485955]
Hi All, To set a single table cell background the Table Properties dialog Background tab page can be used. Currently the Background Color button will only set the cell background color for multi-selected table cells. For non multi-selected cells the paragraph background color is set for the cell with the cursor. Here is a patch that makes the Background Color button set cell background color, not paragraph color, for the cell with the cursor: https://gerrit.libreoffice.org/#/c/65195/ Testing and comments appreciated. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1485955 Title: [upstream] EDITING: Background Color button from Table toolbar should change cell background instead of paragraph background To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1485955/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808653] [NEW] xorg? 4k only at 30hzIntel® Iris™ Plus 655
Public bug reported: 1. as you can see in the error log there is an authorisation issue too. 2. I can not select 4k video with 60hz. The LG 27ud58-b does support it and the Intel® Iris™ Plus 655 too. 3. When the lg monitor is in HDMI ultra hd deep color mode then the screen keeps blinking in 4k resolution. ProblemType: Bug DistroRelease: Ubuntu 18.10 Package: xorg 1:7.7+19ubuntu8 ProcVersionSignature: Ubuntu 4.18.0-12.13-generic 4.18.17 Uname: Linux 4.18.0-12-generic x86_64 ApportVersion: 2.20.10-0ubuntu13.1 Architecture: amd64 BootLog: Error: [Errno 13] Toegang geweigerd: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: XFCE Date: Sat Dec 15 19:48:32 2018 DistUpgraded: Fresh install DistroCodename: cosmic DistroVariant: ubuntu ExtraDebuggingInterest: Yes, if not too technical GraphicsCard: Intel Corporation Device [8086:3ea5] (rev 01) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:2074] InstallationDate: Installed on 2018-12-13 (2 days ago) InstallationMedia: Xubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.2) MachineType: Intel(R) Client Systems NUC8i5BEH ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-12-generic root=UUID=82e03d14-dda1-416d-910c-6bb973e28ff6 ro quiet splash vt.handoff=1 SourcePackage: xorg UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/15/2018 dmi.bios.vendor: Intel Corp. dmi.bios.version: BECFL357.86A.0051.2018.1015.1513 dmi.board.name: NUC8BEB dmi.board.vendor: Intel Corporation dmi.board.version: J72692-303 dmi.chassis.type: 3 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.modalias: dmi:bvnIntelCorp.:bvrBECFL357.86A.0051.2018.1015.1513:bd10/15/2018:svnIntel(R)ClientSystems:pnNUC8i5BEH:pvrJ72747-302:rvnIntelCorporation:rnNUC8BEB:rvrJ72692-303:cvnIntelCorporation:ct3:cvr2.0: dmi.product.family: Intel NUC dmi.product.name: NUC8i5BEH dmi.product.sku: BOXNUC8i5BEH dmi.product.version: J72747-302 dmi.sys.vendor: Intel(R) Client Systems version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.95-1 version.libgl1-mesa-dri: libgl1-mesa-dri 18.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.1-3ubuntu2.1 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:18.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20171229-1ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-3 ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug cosmic ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808653 Title: xorg? 4k only at 30hzIntel® Iris™ Plus 655 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1808653/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Thank you. It may be a week or two until I have time to reinstall drivers. I will repost if that helps. Let me know if I should do anything else today. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Let me know if you agree. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Thanks. Ok, there is no port 9100, so socket:// will not work. One lives and learns! Looking at the error_log again all the filters complete successfully: D [14/Dec/2018:13:16:23 -0600] [Job 478] 4 filters for job: D [14/Dec/2018:13:16:23 -0600] [Job 478] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32) D [14/Dec/2018:13:16:23 -0600] [Job 478] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66) D [14/Dec/2018:13:16:23 -0600] [Job 478] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99) D [14/Dec/2018:13:16:23 -0600] [Job 478] rastertogutenprint.5.2 (application/vnd.cups-raster to printer/MX860, cost 100) Search for "exited" and "normally". All that cnijnet:/ does is transport what rastertogutenprint.5.2 produces to the printer. Perhaps the printer is unhappy with the input from gutenprint? I cannot test this. I can only suggest you use the Canon drivers. -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1802712] Re: Doesn't work a touchpad on Lenovo 330-15IGM 81d1
Upstream kernel commit https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/input/mouse/elan_i2c_core.c?id=13c1c5e4d7f887cba36c5e3df3faa22071c1469f Should fix this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1802712 Title: Doesn't work a touchpad on Lenovo 330-15IGM 81d1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1802712/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1751497] Re: Bionic daily build - nouveau: Direct firmware load for nouveau/nve7_fuc084 failed with error -2
4.673164] fbcon: nouveaufb (fb0) is primary device [4.956933] IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready [4.960504] RTL8211DN Gigabit Ethernet r8169-1300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-1300:00, irq=IGNORE) [5.198912] IPv6: ADDRCONF(NETDEV_UP): enp19s0: link is not ready [5.200585] r8169 :13:00.0 enp19s0: Link is Down [5.206992] IPv6: ADDRCONF(NETDEV_UP): wlp7s0: link is not ready [5.700931] Console: switching to colour frame buffer device 200x56 [5.702735] nouveau :01:00.0: fb0: nouveaufb frame buffer device [5.719849] [drm] Initialized nouveau 1.3.1 20120801 for :01:00.0 on minor 0 [7.506726] r8169 :13:00.0 enp19s0: Link is Up - 1Gbps/Full - flow control rx/tx [7.506739] IPv6: ADDRCONF(NETDEV_CHANGE): enp19s0: link becomes ready [ 21.774819] nouveau :01:00.0: Direct firmware load for nouveau/nvd9_fuc084 failed with error -2 [ 21.774832] nouveau :01:00.0: Direct firmware load for nouveau/nvd9_fuc084d failed with error -2 [ 21.774835] nouveau :01:00.0: msvld: unable to load firmware data [ 21.774840] nouveau :01:00.0: msvld: init failed, -19 Ubuntu 18.04 and nouveau driver . -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1751497 Title: Bionic daily build - nouveau: Direct firmware load for nouveau/nve7_fuc084 failed with error -2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1751497/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1788336] Re: Failed to install nfs-kernel-server package on KVM kernels
** Changed in: linux-kvm (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1788336 Title: Failed to install nfs-kernel-server package on KVM kernels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1788336/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
I think my only other option is to de-install and re-install the printer driver. That is a pain because Canon does not support Linux drivers. I have to search the web for the latest version from a hopefully reliable source. It takes a day. Doing this always results in inconsistent results for print and scan function on the printer. Sometimes only print works, other times only scan. Since this happened when I upgraded my machine to 18.04, re-installing may be the best answer. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766945] Re: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure
Hello I want fix this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766945 Title: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/partman-auto/+bug/1766945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766945] Re: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure
Hello I want fix this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766945 Title: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/partman-auto/+bug/1766945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766945] Re: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure
Hello I want fix this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766945 Title: (EFI on top of legacy install) choosing "replace" or "resize" options in partitioning may lead to an install failure To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/partman-auto/+bug/1766945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808640] Re: package libwoff1 (not installed) failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2
Thank you for taking the time to report this bug and helping to make Ubuntu better. It seems that there was an error on your system when trying to install a particular package. Please execute the following command, as it will clear your package cache, in a terminal: sudo apt-get clean Then try performing the update again. This will likely resolve your issue, but the failure could be caused by filesystem or memory corruption. So please also run a fsck on your filesystem(s) and a memory test. Thanks in advance! [This is an automated message. I apologize if it reached you inappropriately; please just reply to this message indicating so.] ** Tags added: fsys-tarfile-error ** Changed in: woff2 (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808640 Title: package libwoff1 (not installed) failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/woff2/+bug/1808640/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
kim@kim-MS-7865:/etc/cups/ppd$ nmap 192.168.1.87 Starting Nmap 7.60 ( https://nmap.org ) at 2018-12-15 14:12 CST Nmap scan report for unknown001e8f745a78.attlocal.net (192.168.1.87) Host is up (0.086s latency). Not shown: 998 closed ports PORTSTATE SERVICE 80/tcp open http 139/tcp open netbios-ssn Nmap done: 1 IP address (1 host up) scanned in 1.17 seconds -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808639] Re: package python3 3.6.5-3ubuntu1 failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2
Thank you for taking the time to report this bug and helping to make Ubuntu better. It seems that there was an error on your system when trying to install a particular package. Please execute the following command, as it will clear your package cache, in a terminal: sudo apt-get clean Then try performing the update again. This will likely resolve your issue, but the failure could be caused by filesystem or memory corruption. So please also run a fsck on your filesystem(s) and a memory test. Thanks in advance! [This is an automated message. I apologize if it reached you inappropriately; please just reply to this message indicating so.] ** Tags added: fsys-tarfile-error ** Changed in: python3-defaults (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808639 Title: package python3 3.6.5-3ubuntu1 failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python3-defaults/+bug/1808639/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808650] [NEW] package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces nový pre-installation skript vrátil chybový status 1
Public bug reported: - ProblemType: Package DistroRelease: Ubuntu 16.04 Package: libc6 2.19-0ubuntu6.14 ProcVersionSignature: Ubuntu 4.4.0-140.166~14.04.1-generic 4.4.162 Uname: Linux 4.4.0-140-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.29 Architecture: amd64 Date: Sat Dec 15 20:36:53 2018 Dependencies: gcc-4.9-base 4.9.3-0ubuntu4 libc6 2.19-0ubuntu6.14 libgcc1 1:4.9.3-0ubuntu4 multiarch-support 2.19-0ubuntu6.14 DuplicateSignature: package:libc6:2.19-0ubuntu6.14:podproces nový pre-installation skript vrátil chybový status 1 ErrorMessage: podproces nový pre-installation skript vrátil chybový status 1 InstallationDate: Installed on 2018-09-22 (84 days ago) InstallationMedia: Ubuntu-Server 14.04.5 LTS "Trusty Tahr" - Release amd64 (20160803) RelatedPackageVersions: dpkg 1.17.5ubuntu5.8 apt 1.0.1ubuntu2.18 SourcePackage: eglibc Title: package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces nový pre-installation skript vrátil chybový status 1 UpgradeStatus: Upgraded to xenial on 2018-12-15 (0 days ago) ** Affects: eglibc (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808650 Title: package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces nový pre-installation skript vrátil chybový status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1808650/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808650] Re: package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces nový pre-installation skript vrátil chybový status 1
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808650 Title: package libc6 2.19-0ubuntu6.14 failed to install/upgrade: podproces nový pre-installation skript vrátil chybový status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/1808650/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808233] Re: Update gtk to 3.24.2
** Also affects: gtk+3.0 (Ubuntu Cosmic) Importance: Undecided Status: New ** Changed in: gtk+3.0 (Ubuntu Cosmic) Assignee: (unassigned) => Jeremy Bicha (jbicha) ** Changed in: gtk+3.0 (Ubuntu Cosmic) Importance: Undecided => Medium ** Changed in: gtk+3.0 (Ubuntu Cosmic) Status: New => Triaged ** Changed in: gtk+3.0 (Ubuntu) Status: Triaged => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808233 Title: Update gtk to 3.24.2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1808233/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
> I ran commands: > sudo lpadmin -p mx860 -v socket://192.168.1.87:9100 -E -P > /etc/cups/ppd/MX860.ppd > and lp -d mx860 /etc/nsswitch.conf Looks good. But nothing printed, eh. What do we have for nmap 192.168.1.87 ? -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
The printer continues to be connectable via the printer web host. http://192.168.1.87/English/pages_WinUS/_top.html -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
I ran commands: sudo lpadmin -p mx860 -v socket://192.168.1.87:9100 -E -P /etc/cups/ppd/MX860.ppd and lp -d mx860 /etc/nsswitch.conf -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808538] Re: Please remove src:lua-torch-cutorch
** Changed in: lua-torch-cutorch (Debian) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808538 Title: Please remove src:lua-torch-cutorch To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lua-torch-cutorch/+bug/1808538/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
Print job submitted and hung: kim@kim-MS-7865:/etc/cups/ppd$ lpq MX860 is ready and printing RankOwner Job File(s) Total Size active kim 479 nsswitch.conf 1024 bytes kim@kim-MS-7865:/etc/cups/ppd$ lpstat -t scheduler is running system default destination: MX860 device for MX860: socket://192.168.1.87:9100 MX860 accepting requests since Sat 15 Dec 2018 01:34:45 PM CST printer MX860 now printing MX860-479. enabled since Sat 15 Dec 2018 01:34:45 PM CST The printer is not responding. MX860-479 kim 1024 Sat 15 Dec 2018 01:34:45 PM CST -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808649] [NEW] TLS_CIPHER_LIST and TLS_PROTOCOL Ignored
Public bug reported: No matter what you put in TLS_CIPHER_LIST and/or TLS_PROTOCOL the settings are ignored. There is no way to limit the TLS Protocol or Cipher list in courier imap or pop. This is critical for PCI compliance. Older versions would allow you to manipulate the tls_cipher_list to get the desired effects. The only setting that seem to change the protocols now is the TLS_DHPARAMS setting. If it is blank you will loose some protocols naturally. A PCI scan will result in the following errors on a 18.04 server: IMAP (993/tcp) Early TLS Protocol Detection IMAP (993/tcp) SSL 64-bit Block Size Cipher Suites Supported (SWEET32) CVE-2016-2183 IMAP (993/tcp) SSL Medium Strength Cipher Suites Supported IMAP (993/tcp) Sweet32 Birthday Attack CVE-2016-2183 IMAP (993/tcp) TLS Version 1.0 Protocol Detection The same applies to POP A quick way to enumerate the ciphers/protocols currently active: nmap --script ssl-enum-ciphers -p 993 mail.yourserver.com ** Affects: courier (Ubuntu) Importance: Undecided Status: New ** Information type changed from Private Security to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808649 Title: TLS_CIPHER_LIST and TLS_PROTOCOL Ignored To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/courier/+bug/1808649/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
> -rw-r- 1 root lp 131822 Dec 14 13:17 MX860.ppd There is nothing wrong here. A PPD is not readable by a user process, only by one with root privileges. Whatever you ran did not have root privileges. You are using the gutenprint PPD for MX860; no problem there. Now do lpadmin -p mx860 -v socket:// -E -P /etc/cups/ppd/MX860.ppd and print with lp -d mx860 /etc/nsswitch.conf I am guessing that the Canon printer accepts jobs on port 9100 - most printers do. You could also set up lpadmin with -v cnijnet:/00-1E-8F-74-5A-78 and see how you go on. -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808147] Re: autopkgtests fail on s390x
This bug was fixed in the package libreoffice - 1:6.1.3-0ubuntu9 --- libreoffice (1:6.1.3-0ubuntu9) disco; urgency=medium * debian/tests/smoketest: revert previous change and skip the test altogether on s390x, where unit tests are intentionally not built (LP: #1808147) -- Olivier Tilloy Fri, 14 Dec 2018 23:23:40 +0100 ** Changed in: libreoffice (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808147 Title: autopkgtests fail on s390x To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1808147/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222576/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1785100] Re: Requires JRE to work but does not depend on JRE
** Changed in: pdftk-java (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1785100 Title: Requires JRE to work but does not depend on JRE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pdftk-java/+bug/1785100/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222580/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222584/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222582/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222575/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] Re: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10
apport information ** Tags added: apport-collected cosmic ** Description changed: 2018-12-01T17:06:36.572303+01:00 DELLVENUE7140 su: pam_systemd(su:session): Cannot create session: Already running in a session 2018-12-01T17:06:36.572578+01:00 DELLVENUE7140 su: pam_unix(su:session): session opened for user root by filarsky(uid=1000) 2018-12-01T17:06:38.809874+01:00 DELLVENUE7140 kernel: [ 34.145441] mmc0: Timeout waiting for hardware interrupt. 2018-12-01T17:06:38.809901+01:00 DELLVENUE7140 kernel: [ 34.145443] mmc0: sdhci: SDHCI REGISTER DUMP === 2018-12-01T17:06:38.809902+01:00 DELLVENUE7140 kernel: [ 34.145448] mmc0: sdhci: Sys addr: 0x0008 | Version: 0x0603 2018-12-01T17:06:38.809903+01:00 DELLVENUE7140 kernel: [ 34.145452] mmc0: sdhci: Blk size: 0x7200 | Blk cnt: 0x0008 2018-12-01T17:06:38.809903+01:00 DELLVENUE7140 kernel: [ 34.145456] mmc0: sdhci: Argument: 0x | Trn mode: 0x003b 2018-12-01T17:06:38.809904+01:00 DELLVENUE7140 kernel: [ 34.145460] mmc0: sdhci: Present: 0x01ff | Host ctl: 0x0017 2018-12-01T17:06:38.809905+01:00 DELLVENUE7140 kernel: [ 34.145464] mmc0: sdhci: Power: 0x000f | Blk gap: 0x 2018-12-01T17:06:38.809914+01:00 DELLVENUE7140 kernel: [ 34.145467] mmc0: sdhci: Wake-up: 0x | Clock: 0x0007 2018-12-01T17:06:38.809915+01:00 DELLVENUE7140 kernel: [ 34.145471] mmc0: sdhci: Timeout: 0x000a | Int stat: 0x 2018-12-01T17:06:38.809916+01:00 DELLVENUE7140 kernel: [ 34.145475] mmc0: sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b 2018-12-01T17:06:38.809955+01:00 DELLVENUE7140 kernel: [ 34.145478] mmc0: sdhci: AC12 err: 0x0004 | Slot int: 0x 2018-12-01T17:06:38.809956+01:00 DELLVENUE7140 kernel: [ 34.145482] mmc0: sdhci: Caps: 0x25f8c8bf | Caps_1: 0x2077 2018-12-01T17:06:38.809957+01:00 DELLVENUE7140 kernel: [ 34.145486] mmc0: sdhci: Cmd: 0x123a | Max curr: 0x005800c8 2018-12-01T17:06:38.809957+01:00 DELLVENUE7140 kernel: [ 34.145490] mmc0: sdhci: Resp[0]: 0x | Resp[1]: 0x 2018-12-01T17:06:38.809958+01:00 DELLVENUE7140 kernel: [ 34.145494] mmc0: sdhci: Resp[2]: 0x | Resp[3]: 0x 2018-12-01T17:06:38.809959+01:00 DELLVENUE7140 kernel: [ 34.145496] mmc0: sdhci: Host ctl2: 0x800b 2018-12-01T17:06:38.809960+01:00 DELLVENUE7140 kernel: [ 34.145499] mmc0: sdhci: ADMA Err: 0x | ADMA Ptr: 0x3fc00208 2018-12-01T17:06:38.809961+01:00 DELLVENUE7140 kernel: [ 34.145500] mmc0: sdhci: 2018-12-01T17:06:38.809966+01:00 DELLVENUE7140 kernel: [ 34.145684] mmcblk0: error -84 sending status command, retrying 2018-12-01T17:06:38.869767+01:00 DELLVENUE7140 kernel: [ 34.201457] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-01T17:06:38.869781+01:00 DELLVENUE7140 kernel: [ 34.201709] mmcblk0: error -84 sending status command, retrying 2018-12-01T17:06:38.925667+01:00 DELLVENUE7140 kernel: [ 34.257457] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-01T17:06:38.925684+01:00 DELLVENUE7140 kernel: [ 34.259406] mmcblk0: error -84 sending status command, aborting 2018-12-01T17:06:39.309674+01:00 DELLVENUE7140 kernel: [ 34.641396] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-01T17:06:40.315726+01:00 DELLVENUE7140 systemd-timesyncd[857]: Synchronized to time server 129.250.35.251:123 (2.opensuse.pool.ntp.org). 2018-12-01T17:06:49.561926+01:00 DELLVENUE7140 kernel: [ 44.899647] mmc0: Timeout waiting for hardware interrupt. 2018-12-01T17:06:49.561938+01:00 DELLVENUE7140 kernel: [ 44.899648] mmc0: sdhci: SDHCI REGISTER DUMP === 2018-12-01T17:06:49.561939+01:00 DELLVENUE7140 kernel: [ 44.899653] mmc0: sdhci: Sys addr: 0x0008 | Version: 0x0603 LSPCI : https://pastebin.com/sVKA47r3 After update to kernel 4.19 (OS: opensuse) [Previous log applies to 4.12] 2018-12-02T10:26:57.264780+01:00 DELLVENUE7140 kernel: [ 39.552776] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-02T10:26:57.264814+01:00 DELLVENUE7140 kernel: [ 39.553062] mmc0: new ultra high speed SDR104 SDXC card at address 2018-12-02T10:26:57.280688+01:00 DELLVENUE7140 kernel: [ 39.570818] mmcblk0: mmc0: SR400 367 GiB 2018-12-02T10:26:57.336742+01:00 DELLVENUE7140 kernel: [ 39.624763] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-02T10:26:57.596691+01:00 DELLVENUE7140 kernel: [ 39.887665] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 2018-12-02T10:26:57.688834+01:00 DELLVENUE7140 kernel: [ 39.976691] mmc0: Tuning timeout, falling back to fixed sampling clock 2018-12-02T10:26:57.744789+01:00 DELLVENUE7140 kernel: [ 40.032659] mmc0: Tuning timeout, falling back to fixed sampling clock
[Bug 1808600] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222585/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
/etc/cups/ppd/MX860.ppd: *cupsFilter:"application/vnd.cups-raster 100 rastertogutenprint.5.2" -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222587/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222579/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222583/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222586/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
There was an error above: PpdFiles: Error: command ['fgrep', '-H', '*NickName', '/etc/cups/ppd/MX860.ppd'] failed with exit code 2: grep: /etc/cups/ppd/MX860.ppd: Permission denied Is there an error with the permissions on this file? -rw-r- 1 root lp 131822 Dec 14 13:17 MX860.ppd -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222581/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222577/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808600] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1808600/+attachment/5222578/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808600 Title: Dell venue 7140 micro SD card reader doesnt work with SD card 400GB, it works on windows8.1/10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1808600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808631] Re: Wireshark no longer finds vboxnet0 interface
Nevermind, this is not a bug. The interface is not visible unless Host- Only Networking is added to the VM ** Changed in: wireshark (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808631 Title: Wireshark no longer finds vboxnet0 interface To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wireshark/+bug/1808631/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808631] Re: Wireshark no longer finds vboxnet0 interface
** Attachment added: "wireshark_vboxnet0_missing.png" https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1808631/+attachment/5222573/+files/wireshark_vboxnet0_missing.png ** No longer affects: virtualbox (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808631 Title: Wireshark no longer finds vboxnet0 interface To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wireshark/+bug/1808631/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1804648] Re: host utility doesn't support switch -U (force UDP)
This bug was fixed in the package bind9 - 1:9.11.5+dfsg-1ubuntu1 --- bind9 (1:9.11.5+dfsg-1ubuntu1) disco; urgency=medium * Merge with Debian unstable. Remaining changes: - Build without lmdb support as that package is in Universe - Don't build dnstap as it depends on universe packages: + d/control: drop build-depends on libfstrm-dev, libprotobuf-c-dev and protobuf-c-compiler (universe packages) + d/dnsutils.install: don't install dnstap + d/libdns1104.symbols: don't include dnstap symbols + d/rules: don't build dnstap nor install dnstap.proto * Dropped: - SECURITY UPDATE: denial of service crash when deny-answer-aliases option is used + debian/patches/CVE-2018-5740-1.patch: explicit DNAME query could trigger a crash if deny-answer-aliases was set + debian/patches/CVE-2018-5740-2.patch: add tests + debian/patches/CVE-2018-5740-3.patch: caclulate nlabels and set chainingp correctly, add test + CVE-2018-5740 [Fixed in new upstream version 9.11.5] - d/extras/apparmor.d/usr.sbin.named: add missing comma at the end of the line (Closes: #904983) [Fixed in 1:9.11.4+dfsg-4] - Add a patch to fix named-pkcs11 crashing on startup. (LP #1769440) [Fixed in 1:9.11.4.P1+dfsg-1] - Cherrypick from debian: Add new dst__openssleddsa_init optional symbol (it depends on OpenSSL version) (Closes: #897643) [Fixed in 1:9.11.4.P1+dfsg-1] * Added: - d/p/enable-udp-in-host-command.diff: fix parsing of the -U command line option (LP: #1804648) - d/p/fix-shutdown-race.diff: dig/host/nslookup could crash when interrupted close to a query timeout (LP: #1797926) - d/t/simpletest: drop the internetsociety.org test as it requires network egress access that is not available in the Ubuntu autopkgtest farm. bind9 (1:9.11.5+dfsg-1) unstable; urgency=medium * Use team+...@tracker.debian.org as Maintainer address * New upstream version 9.11.5+dfsg * Add EXTENSIONS= to version file programmatically, not with the patch * Rebase patches for BIND 9.11.5 * Adjust package names for new SONAMEs bind9 (1:9.11.4.P2+dfsg-3) unstable; urgency=medium * Also avoid OpenSSL 1.1.1 in udebs. Thanks to KiBi for the hint * autopkgtest: Make an external query and check for DNSSEC bind9 (1:9.11.4.P2+dfsg-2) unstable; urgency=medium * Temporarily disable EDDSA to relax OpenSSL version requirement bind9 (1:9.11.4.P2+dfsg-1) unstable; urgency=medium [ Bernhard Schmidt ] * Add a very simple autopkgtest (dig @127.0.0.1) [ Ondřej Surý ] * New upstream version 9.11.4.P2+dfsg * Rebase patches for BIND 9.11.4-P2 bind9 (1:9.11.4.P1+dfsg-1) unstable; urgency=medium [ Timo Aaltonen ] * skip-rtld-deepbind-for-dyndb.diff: Add a patch to fix named-pkcs11 crashing on startup. (LP: #1769440) [ Bernhard Schmidt ] * Add gbp.conf for pristine-tar usage * d/watch: Properly deal with -P patch releases [ Ondřej Surý ] * Don't fail to start if /etc/default/bind9 doesn't exist * New upstream version 9.11.4.P1+dfsg * Rebase patches for BIND 9.11.4-P1 * Add new dst__openssleddsa_init optional symbol (it depends on OpenSSL version) (Closes: #897643) * Put aside named.conf.option from stretch when upgrading (Closes: #905177) bind9 (1:9.11.4+dfsg-4) unstable; urgency=medium * Brown-paper-bag release :-( * Fix missing colon in AppArmor profile (Closes: #904983) -- Andreas Hasenack Thu, 13 Dec 2018 19:40:23 -0200 ** Changed in: bind9 (Ubuntu) Status: In Progress => Fix Released ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-5740 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1804648 Title: host utility doesn't support switch -U (force UDP) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bind9/+bug/1804648/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1797926] Re: host crashed with SIGABRT in isc_assertion_failed()
This bug was fixed in the package bind9 - 1:9.11.5+dfsg-1ubuntu1 --- bind9 (1:9.11.5+dfsg-1ubuntu1) disco; urgency=medium * Merge with Debian unstable. Remaining changes: - Build without lmdb support as that package is in Universe - Don't build dnstap as it depends on universe packages: + d/control: drop build-depends on libfstrm-dev, libprotobuf-c-dev and protobuf-c-compiler (universe packages) + d/dnsutils.install: don't install dnstap + d/libdns1104.symbols: don't include dnstap symbols + d/rules: don't build dnstap nor install dnstap.proto * Dropped: - SECURITY UPDATE: denial of service crash when deny-answer-aliases option is used + debian/patches/CVE-2018-5740-1.patch: explicit DNAME query could trigger a crash if deny-answer-aliases was set + debian/patches/CVE-2018-5740-2.patch: add tests + debian/patches/CVE-2018-5740-3.patch: caclulate nlabels and set chainingp correctly, add test + CVE-2018-5740 [Fixed in new upstream version 9.11.5] - d/extras/apparmor.d/usr.sbin.named: add missing comma at the end of the line (Closes: #904983) [Fixed in 1:9.11.4+dfsg-4] - Add a patch to fix named-pkcs11 crashing on startup. (LP #1769440) [Fixed in 1:9.11.4.P1+dfsg-1] - Cherrypick from debian: Add new dst__openssleddsa_init optional symbol (it depends on OpenSSL version) (Closes: #897643) [Fixed in 1:9.11.4.P1+dfsg-1] * Added: - d/p/enable-udp-in-host-command.diff: fix parsing of the -U command line option (LP: #1804648) - d/p/fix-shutdown-race.diff: dig/host/nslookup could crash when interrupted close to a query timeout (LP: #1797926) - d/t/simpletest: drop the internetsociety.org test as it requires network egress access that is not available in the Ubuntu autopkgtest farm. bind9 (1:9.11.5+dfsg-1) unstable; urgency=medium * Use team+...@tracker.debian.org as Maintainer address * New upstream version 9.11.5+dfsg * Add EXTENSIONS= to version file programmatically, not with the patch * Rebase patches for BIND 9.11.5 * Adjust package names for new SONAMEs bind9 (1:9.11.4.P2+dfsg-3) unstable; urgency=medium * Also avoid OpenSSL 1.1.1 in udebs. Thanks to KiBi for the hint * autopkgtest: Make an external query and check for DNSSEC bind9 (1:9.11.4.P2+dfsg-2) unstable; urgency=medium * Temporarily disable EDDSA to relax OpenSSL version requirement bind9 (1:9.11.4.P2+dfsg-1) unstable; urgency=medium [ Bernhard Schmidt ] * Add a very simple autopkgtest (dig @127.0.0.1) [ Ondřej Surý ] * New upstream version 9.11.4.P2+dfsg * Rebase patches for BIND 9.11.4-P2 bind9 (1:9.11.4.P1+dfsg-1) unstable; urgency=medium [ Timo Aaltonen ] * skip-rtld-deepbind-for-dyndb.diff: Add a patch to fix named-pkcs11 crashing on startup. (LP: #1769440) [ Bernhard Schmidt ] * Add gbp.conf for pristine-tar usage * d/watch: Properly deal with -P patch releases [ Ondřej Surý ] * Don't fail to start if /etc/default/bind9 doesn't exist * New upstream version 9.11.4.P1+dfsg * Rebase patches for BIND 9.11.4-P1 * Add new dst__openssleddsa_init optional symbol (it depends on OpenSSL version) (Closes: #897643) * Put aside named.conf.option from stretch when upgrading (Closes: #905177) bind9 (1:9.11.4+dfsg-4) unstable; urgency=medium * Brown-paper-bag release :-( * Fix missing colon in AppArmor profile (Closes: #904983) -- Andreas Hasenack Thu, 13 Dec 2018 19:40:23 -0200 ** Changed in: bind9 (Ubuntu) Status: In Progress => Fix Released ** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-5740 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1797926 Title: host crashed with SIGABRT in isc_assertion_failed() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bind9/+bug/1797926/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1354213] Re: With 'dwell-click' enabled there is no scrolling with mousewheel in gtk3 windows
Sorry, adding this at the end of ~/.profile solves the problem for the mentioned reason: export GDK_CORE_DEVICE_EVENTS=1 I forgot to add "export". -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1354213 Title: With 'dwell-click' enabled there is no scrolling with mousewheel in gtk3 windows To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mousetweaks/+bug/1354213/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808642] Re: package streamtuner2 2.2.1+dfsg-1 failed to install/upgrade: installed streamtuner2 package post-installation script subprocess returned error exit status 1
Hello,
This programm don't work with python3
print "ERROR"
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean
print("ERROR")?
How to convert this package to python3 ?
Sould I change ln python to python2./ ?
Best regards
Battant
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808642
Title:
package streamtuner2 2.2.1+dfsg-1 failed to install/upgrade: installed
streamtuner2 package post-installation script subprocess returned
error exit status 1
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/streamtuner2/+bug/1808642/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808646] Re: obaif graphics driver fails on amd while restarting
with obaif i did see my graphics card, but I don't want to mess with my hardware, so I have uninstalled it. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808646 Title: obaif graphics driver fails on amd while restarting To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1808646/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808646] [NEW] obaif graphics driver fails on amd while restarting
Public bug reported: I have a hybrid card and I don't see the AMD Radeon Topaz M260, thus I have installed from obaif. Problem: While restarting my computer - half bottom of the screen has got lines. (a refreshing problem of the screen - I'm on 100HZ), which does not happen on stop/start. Sometimes it happens on stop. While restarting: After logging in with my user/password, before that it's not happening. There is no report bug button on the obaif corner of the launchpad. I'm not sure, but somehow I had a Nvidia driver installed also, which I have removed. (at least I hope) It caused also problems (indefinite loops while trying to replace the mesa driver, even if I haven't any nvidia hardware, which is absolute bunker) In the official AMD page my card is not supported. (14.04 is the last release 2015) Last time when I tried to install the official amd-gpu driver, I was not able to log in. So at the moment, I don't see my second card, although the problem on restart seems to be disappeared. (the reported flickering issue of scrolling) As I had many combinations, like nvidia was installed, obaif not, and both and got similar flickering problems i kindly ask you how to get my graphics card up and running without making a crap from my intel HD 5500 also. ** Affects: ubuntu Importance: Undecided Status: New ** Package changed: chromium-browser (Ubuntu) => ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808646 Title: obaif graphics driver fails on amd while restarting To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1808646/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1808581] Re: cannot print to Canon MX860 after upgrade to Ubuntu 18.04
I'm a little perplexed, Kim, because CUPS appears not to detect your printer. Anyway, we'll leave that on one side and look at the error_log and at the line "DEVICE_URI=cnijnet:/00:1E:8F:74:5A:78" I am not familiar with Canon printers, but this looks like a misconfiguration. From what I see elsewhere, it should be "DEVICE_URI=cnijnet:/00-1E-8F-74-5A-78" I would expect this (ofter called JetDirect) to work too: "DEVICE_URI=socket://" There should be a PPD for the print queue in /etc/cups/pppd. What does its *cupsFilter line show? -- Brian. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1808581 Title: cannot print to Canon MX860 after upgrade to Ubuntu 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1808581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1768738] Re: compiz
Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately, we cannot work on this bug because your description didn't include enough information. You may find it helpful to read "How to report bugs effectively" http://www.chiark.greenend.org.uk/~sgtatham/bugs.html. We'd be grateful if you would then provide a more complete description of the problem. We have instructions on debugging some types of problems at http://wiki.ubuntu.com/DebuggingProcedures. At a minimum, we need: 1. The specific steps or actions you took that caused you to encounter the problem. 2. The behavior you expected. 3. The behavior you actually encountered (in as much detail as possible). Thanks! ** Changed in: nautilus (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1768738 Title: compiz To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1768738/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1802701] Re: package codeblocks-contrib 16.01~ubuntu16.04.1 failed to install/upgrade: trying to overwrite '/usr/lib/codeblocks/wxContribItems/libwxchartctrl.so.0.0.1', which is also in package c
The conflicting package codeblocks-libwxcontrib0 is not provided by Ubuntu so this is not a bug in Ubuntu. It looks like the third-party codeblocks that you have installed cannot be installed at the same time as the Ubuntu-provided codeblocks. I suggest you make a decision which one you are going to use, and remove the other. ** Changed in: codeblocks (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1802701 Title: package codeblocks-contrib 16.01~ubuntu16.04.1 failed to install/upgrade: trying to overwrite '/usr/lib/codeblocks/wxContribItems/libwxchartctrl.so.0.0.1', which is also in package codeblocks-libwxcontrib0 16.01~ubuntu16.04.1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/codeblocks/+bug/1802701/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
