[Bug 1894329] Re: ZFS revert from grub menu not working.
I installed: zfs-initramfs 0.8.4-1ubuntu11.1 amd64 from groovy-proposed olivier@bison:~$ sudo apt install zfs-initramfs I created a new snapshot: olivier@bison:~$ sudo zsysctl state save -s xfer01 I restarted the laptop and did a revert from xfer01, and the boot was successful I confirm this fixes the issue for groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894329 Title: ZFS revert from grub menu not working. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1894329/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1833855] Re: i915: EDID not detected on VGA resulting in low resolution 1024x768
I checked with 1920x1080p screen and it is very fine. Abled to display the resolution. But why it is unable for the 1440x900p. My monitor is LG-20MP48HB-BB model. I tried with dell FHD mintor at which it worked fine. Why the 20.04 LTS is unable to display the desired resolution? It worked when there is 14.04 and 16.04. If I set the resolution at 1440x900p some times it is hanging. And some times it is reverting back to 1024x768. Please send a patch to my system to make the issue clear. I will try to boot the 20.10 later. But issue is with my 20.04. So please solve it. On Mon, Nov 30, 2020 at 7:55 AM Daniel van Vugt <1833...@bugs.launchpad.net> wrote: > I wasn't asking you to upgrade, only to try booting from USB > temporarily. Or follow the instructions in comment #6. > > -- > You received this bug notification because you are subscribed to a > duplicate bug report (1904765). > https://bugs.launchpad.net/bugs/1833855 > > Title: > i915: EDID not detected on VGA resulting in low resolution 1024x768 > > Status in linux package in Ubuntu: > Confirmed > > Bug description: > hi! some problem. i have an video intel graphic card Q965 but i dont > have any hi-resolution like 1080. i'm in vga mode only. Can you help > me? > > ProblemType: Bug > DistroRelease: Ubuntu 18.04 > Package: xorg 1:7.7+19ubuntu7.1 > ProcVersionSignature: Ubuntu 4.18.0-22.23~18.04.1-generic 4.18.20 > Uname: Linux 4.18.0-22-generic x86_64 > ApportVersion: 2.20.9-0ubuntu7.6 > Architecture: amd64 > BootLog: Error: [Errno 13] Permission non accordée: '/var/log/boot.log' > CompositorRunning: None > CurrentDesktop: ubuntu:GNOME > Date: Sun Jun 23 09:58:42 2019 > DistUpgraded: Fresh install > DistroCodename: bionic > DistroVariant: ubuntu > ExtraDebuggingInterest: Yes > GraphicsCard: >Intel Corporation 82Q963/Q965 Integrated Graphics Controller > [8086:2992] (rev 02) (prog-if 00 [VGA controller]) > Subsystem: Dell 82Q963/Q965 Integrated Graphics Controller [1028:01da] > Subsystem: Dell 82Q963/Q965 Integrated Graphics Controller [1028:01da] > InstallationDate: Installed on 2019-06-18 (5 days ago) > InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 > (20190210) > MachineType: Dell Inc. OptiPlex 745 > ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.18.0-22-generic > root=UUID=017d360b-c7a7-47e3-8d37-669b93a45647 ro quiet splash > video=hyperv_fb:1280x720 vt.handoff=1 > SourcePackage: xorg > UpgradeStatus: No upgrade log present (probably fresh install) > dmi.bios.date: 03/01/2010 > dmi.bios.vendor: Dell Inc. > dmi.bios.version: 2.6.4 > dmi.board.name: 0GW726 > dmi.board.vendor: Dell Inc. > dmi.chassis.type: 16 > dmi.chassis.vendor: Dell Inc. > dmi.modalias: > dmi:bvnDellInc.:bvr2.6.4:bd03/01/2010:svnDellInc.:pnOptiPlex745:pvr:rvnDellInc.:rn0GW726:rvr:cvnDellInc.:ct16:cvr: > dmi.product.name: OptiPlex 745 > dmi.sys.vendor: Dell Inc. > version.compiz: compiz N/A > version.libdrm2: libdrm2 2.4.98+git1906111830.5db0f7~oibaf~b > version.libgl1-mesa-dri: libgl1-mesa-dri > 19.2~git1906191930.9c19d0~oibaf~b > version.libgl1-mesa-glx: libgl1-mesa-glx > 19.2~git1906191930.9c19d0~oibaf~b > version.xserver-xorg-core: xserver-xorg-core N/A > version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A > version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A > version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A > version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A > > To manage notifications about this bug go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1833855/+subscriptions > -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1833855 Title: i915: EDID not detected on VGA resulting in low resolution 1024x768 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1833855/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1890435] Re: gcc-10 breaks on armhf (flaky): internal compiler error: Segmentation fault
r10-6824 bad 1 of 24, signature matches We have only a few steps to go and need to increase the number of runs to be sure, so I'll let it run for a while longer. Also - eventually - I'll re-run what we consider to be the last good, quite a few times to be sure. Most likely I'll later today switch and test r10-6822 next. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1890435 Title: gcc-10 breaks on armhf (flaky): internal compiler error: Segmentation fault To manage notifications about this bug go to: https://bugs.launchpad.net/groovy/+bug/1890435/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906972] [NEW] Grub install failed on ubuntu 21.04 Thinkpad t510
Public bug reported: Saw this on the daily ISO on a dual boot install. ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: ubiquity 21.04.3 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Uname: Linux 5.8.0-25-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu55 Architecture: amd64 CasperMD5CheckResult: skip CasperVersion: 1.456 CurrentDesktop: ubuntu:GNOME Date: Sun Dec 6 02:00:42 2020 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 21.04 "Hirsute Hippo" - Alpha amd64 (20201205) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 RebootRequiredPkgs: linux-image-5.8.0-25-generic linux-base SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug hirsute ubiquity-21.04.3 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906972 Title: Grub install failed on ubuntu 21.04 Thinkpad t510 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1906972/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906970] Re: dpkg hook hostname error
** Description changed: I tried to install postfix (3.4.13-0ubuntu1) within a Dockerfile (Ubuntu 20.04.01 LTS) and it failed because there is an error in the dpkg info file. I'm attaching the log of the 2nd time "apt install -y postfix" is executed, as it is way shorter and still shows the error message. ``` root@cc1a572af0dc:/etc# apt install -y postfix Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version (3.4.13-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up postfix (3.4.13-0ubuntu1) ... Postfix (main.cf) configuration was untouched. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run 'systemctl reload postfix'. Running newaliases newaliases: warning: valid_hostname: misplaced delimiter: cc1a572af0dc.. newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: cc1a572af0dc.. dpkg: error processing package postfix (--configure): installed postfix package post-installation script subprocess returned error exit status 75 Processing triggers for libc-bin (2.31-0ubuntu9.1) ... Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) ``` I then looked into the /etc/postfix/main.cf file and tried to manually change the hostname, but it automatically gets overwritten by dpkg when apt install is ran. After that I was able to track the issue into the script "/var/lib/dpkg/info/postfix.postinst" more exactly the sed command in line 52. It reads the content of the search parameter from /etc/resolv.conf, and concatenates it with a "." as delimiter with the hostname, but it doesn't honor the special case of "search ." and therefore constructs an incorrect myhostname parameter for postfix of "cc1a572af0dc..". I'd propose to remove this resolve.conf lookup entirely so that the package installation doesn't fail within docker containers... It is a bad practice in my opinion to overwrite existing config files upon package installation. Also I'd suggest not executing postfix after the configuration is written, so that in case of unforeseen circumstances (like this one) a user can just simply run a sed against the config file after installing the package. - And the Dockerfile for reference: ``` FROM ubuntu:latest ENV DEBIAN_FRONTEND=noninteractive - ENV DEBIAN_PRIORITY=low + #ENV DEBIAN_PRIORITY=low RUN apt update \ - && echo "postfix postfix/main_mailer_type select Internet Site" | debconf-set-selections \ - && echo "postfix postfix/mailname string mysubdomain.mydomain.com" | debconf-set-selections \ - && apt install -y postfix + && echo "postfix postfix/main_mailer_type select Internet Site" | debconf-set-selections \ + && echo "postfix postfix/mailname string mysubdomain.mydomain.com" | debconf-set-selections \ + && apt install -y postfix ``` -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906970 Title: dpkg hook hostname error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/1906970/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906970] [NEW] dpkg hook hostname error
Public bug reported: I tried to install postfix (3.4.13-0ubuntu1) within a Dockerfile (Ubuntu 20.04.01 LTS) and it failed because there is an error in the dpkg info file. I'm attaching the log of the 2nd time "apt install -y postfix" is executed, as it is way shorter and still shows the error message. ``` root@cc1a572af0dc:/etc# apt install -y postfix Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version (3.4.13-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up postfix (3.4.13-0ubuntu1) ... Postfix (main.cf) configuration was untouched. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run 'systemctl reload postfix'. Running newaliases newaliases: warning: valid_hostname: misplaced delimiter: cc1a572af0dc.. newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: cc1a572af0dc.. dpkg: error processing package postfix (--configure): installed postfix package post-installation script subprocess returned error exit status 75 Processing triggers for libc-bin (2.31-0ubuntu9.1) ... Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) ``` I then looked into the /etc/postfix/main.cf file and tried to manually change the hostname, but it automatically gets overwritten by dpkg when apt install is ran. After that I was able to track the issue into the script "/var/lib/dpkg/info/postfix.postinst" more exactly the sed command in line 52. It reads the content of the search parameter from /etc/resolv.conf, and concatenates it with a "." as delimiter with the hostname, but it doesn't honor the special case of "search ." and therefore constructs an incorrect myhostname parameter for postfix of "cc1a572af0dc..". I'd propose to remove this resolve.conf lookup entirely so that the package installation doesn't fail within docker containers... It is a bad practice in my opinion to overwrite existing config files upon package installation. Also I'd suggest not executing postfix after the configuration is written, so that in case of unforeseen circumstances (like this one) a user can just simply run a sed against the config file after installing the package. And the Dockerfile for reference: ``` FROM ubuntu:latest ENV DEBIAN_FRONTEND=noninteractive #ENV DEBIAN_PRIORITY=low RUN apt update \ && echo "postfix postfix/main_mailer_type select Internet Site" | debconf-set-selections \ && echo "postfix postfix/mailname string mysubdomain.mydomain.com" | debconf-set-selections \ && apt install -y postfix ``` ** Affects: postfix (Ubuntu) Importance: Undecided Status: New ** Description changed: I tried to install postfix (3.4.13-0ubuntu1) within a Dockerfile (Ubuntu 20.04.01 LTS) and it failed because there is an error in the dpkg info file. I'm attaching the log of the 2nd time "apt install -y postfix" is executed, as it is way shorter and still shows the error message. ``` root@cc1a572af0dc:/etc# apt install -y postfix Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version (3.4.13-0ubuntu1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up postfix (3.4.13-0ubuntu1) ... Postfix (main.cf) configuration was untouched. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run 'systemctl reload postfix'. Running newaliases newaliases: warning: valid_hostname: misplaced delimiter: cc1a572af0dc.. newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: cc1a572af0dc.. dpkg: error processing package postfix (--configure): - installed postfix package post-installation script subprocess returned error exit status 75 + installed postfix package post-installation script subprocess returned error exit status 75 Processing triggers for libc-bin (2.31-0ubuntu9.1) ... Errors were encountered while processing: - postfix + postfix E: Sub-process /usr/bin/dpkg returned an error code (1) ``` I then looked into the /etc/postfix/main.cf file and tried to manually change the hostname, but it automatically gets overwritten by dpkg when apt install is ran. After that I was able to track the issue into the script "/var/lib/dpkg/info/postfix.postinst" more exactly the sed command in line 52. It reads the content of the search parameter from /etc/resolv.conf, and concatenates
[Bug 1626689] Re: During boot process, system goes to sleep
Hi, I've came across this bug report, when dealing with the same problem on Dell E7450 (pretty much always docked) on kernel 5.9.11. For anyone who stumbles upon this: button.lid_init_state=open itself wasn't satisfactory, because it left my laptop display ON of course, making it the main one. I've took the naive approach, as my laptop is pretty much docker all the time. cat /etc/X11/xinit/xinitrc.d/10-lid-workaround.sh #!/usr/bin/bash display_cnt=$(xrandr | grep -c " connected") if [ $display_cnt -eq 3 ]; then xrandr --output DP1-1 --auto --left-of DP1-2 --output eDP1 --off fi which turns the laptop display off after login, while maintaing monitor arrangemment I want display names might differ in your case. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1626689 Title: During boot process, system goes to sleep To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1626689/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906946] Re: please sync rust-signal-hook 0.1.13-1 from sid
** Also affects: rust-condure (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906946 Title: please sync rust-signal-hook 0.1.13-1 from sid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1906946/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906600] Re: WiFi disconnects continually (goes "down" in NetworkManager)
I think I was supposed to mark each item in the affects column as confirmed, but I neglected to do that on 'linux (ubuntu)'. I've now marked that as confirmed as well. Apologies if this was not what I was supposed to do. Thanks again to all! ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906600 Title: WiFi disconnects continually (goes "down" in NetworkManager) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1906600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906969] [NEW] Basic 'Copy' function removed from the context menu in the Book Details window
Public bug reported: Please include the basic 'Copy' function of highlighted text in the Book Details window. I would like to be able to use the context menu to copy highlighted text, such as book reviews or title and series information from the Book Details window to paste elsewhere. I think the function must have been removed in the last update, calibre 5.6. Now there is only: Copy all book details or Copy link to book. ** Affects: calibre (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906969 Title: Basic 'Copy' function removed from the context menu in the Book Details window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/calibre/+bug/1906969/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1893820] Re: DPLL2 override remains enabled after warm boot of Linux
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1893820 Title: DPLL2 override remains enabled after warm boot of Linux To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1893820/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883008] Re: Displaylink USB3 HDMI Adapter does not resume after suspending
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883008 Title: Displaylink USB3 HDMI Adapter does not resume after suspending To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883008/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897478] Re: ubuntu 20.04 is extremely slow to upgrade, install or uninstall any software and launch any of it
[Expired for Ubuntu because there has been no activity for 60 days.] ** Changed in: ubuntu Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897478 Title: ubuntu 20.04 is extremely slow to upgrade, install or uninstall any software and launch any of it To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1897478/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897853] Re: [regression] gnome-shell stutters noticeably with kernel 5.8.0-19, but not 5.8.0-18
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897853 Title: [regression] gnome-shell stutters noticeably with kernel 5.8.0-19, but not 5.8.0-18 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897853/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1898009] Re: upgrader failes -Could not calculate the upgrade
[Expired for ubuntu-release-upgrader (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1898009 Title: upgrader failes -Could not calculate the upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1898009/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1898079] Re: upgrade to ubuntu 20.04 failed
[Expired for ubuntu-release-upgrader (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1898079 Title: upgrade to ubuntu 20.04 failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1898079/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1898563] Re: [radeon] Screen freeze
[Expired for Ubuntu because there has been no activity for 60 days.] ** Changed in: ubuntu Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1898563 Title: [radeon] Screen freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1898563/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1822937] Re: NVIDIA settings won't write to /etc/xorg
Same here, with Nvidia 455.45.01 on Ubuntu 20.04. In fact I've been facing this for years, since 18.04. The workaround I'm using is to call nvidia-settings via a shell script in Gnome's Startup Applications. It's a bit annoying because it only applies after you log in, but has the additional benefit that you can execute manually if your monitors get out of sync for some reason (handy if you use a KVM that forces X to re-detect monitors). You can save your config via nvidia-settings to a separate location, and then extract the exact parameters for each monitor. Here's mine: # monitor-reset.sh: sh -c 'nvidia-settings --assign XineramaInfoOrder="USB-C-0" --assign CurrentMetaMode="DP-5: 1920x1200 +0+560, USB-C-0: 2560x1600 +1920+160, HDMI-0: 1920x1200 +4480+0 {rotation=left}"' > /dev/null 2>&1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1822937 Title: NVIDIA settings won't write to /etc/xorg To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/1822937/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971221] Re: Can not login to Picasa 3.9 under Wine
** Changed in: wine Status: Confirmed => Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971221 Title: Can not login to Picasa 3.9 under Wine To manage notifications about this bug go to: https://bugs.launchpad.net/wine/+bug/971221/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
The output Coiby requested [root@lappy-the-laptop ~]# journalctl -k | grep -i amd_ Dec 05 15:55:13 lappy-the-laptop kernel: amd_uncore: AMD NB counters detected Dec 05 15:55:13 lappy-the-laptop kernel: amd_uncore: AMD LLC counters detected Dec 05 15:55:13 lappy-the-laptop kernel: amd_gpio reg_val=500e8, pin=130 (before set_type) Dec 05 15:55:13 lappy-the-laptop kernel: amd_gpio reg_val=50388, pin=130 (LEVEL_LOW) Dec 05 15:55:13 lappy-the-laptop kernel: amd_gpio reg_val=503c8, pin=130 (before set_type) Dec 05 15:55:13 lappy-the-laptop kernel: amd_gpio reg_val=50388, pin=130 (LEVEL_LOW) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 To manage notifications about this bug go to: https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971221]
Created attachment 68784 screenshot showing connecting is impossible now Indeed, connect to google in impossible with Picassa 3.9. Tested in a real windows XP box. Can an administrator close this bug as ABANDONED? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971221 Title: Can not login to Picasa 3.9 under Wine To manage notifications about this bug go to: https://bugs.launchpad.net/wine/+bug/971221/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971221]
Hello joaopa, thanks, but no need for that oldversion.fr link which redirects to a CDN for downloads = might not be stable enough. The Internet Archive has already snapshotted the original Google link: --- snip --- Saved 97 times between July 21, 2012 and October 18, 2020. --- snip --- https://web.archive.org/web/*/http://dl.google.com/picasa/picasa39-setup.exe https://web.archive.org/web/20120721231101/http://dl.google.com/picasa/picasa39-setup.exe Tidbit: https://support.google.com/picasa/answer/6383491?hl=en_id=637427832873233977-573366911=3 --- quote --- What's happening to Picasa, Picasa Web Albums, and the Picasa Web Albums API? Picasa is now retired. (If you speak English, you can read the blog post here.) --- quote --- https://web.archive.org/web/20201108170949/http://googlephotos.blogspot.com/2016/02 /moving-on-from-picasa.html --- snip --- $ pwd /home/focht/.wine/drive_c/Program Files (x86)/Google/Picasa3 $ WINEDEBUG=+msgbox wine ./Picasa3.exe --- snip --- Top right -> 'Sign in with Google Account' --- snip --- ... 0024:fixme:ieframe:DocObjectService_IsErrorUrl 00193140 L"https://accounts.google.com/o/oauth2/programmatic_auth?scope=https://www.googleapis.com/auth/userinfo%23email+https://mail.google.com/+https://www.googleapis.com/auth/photos+https://www.google.com/m8/feeds/+https://picasaweb.google.com/c/+https://www.googleapis.com/auth/plus.stream.write+;... 003169FC 0024:fixme:ieframe:handle_navigation_error Navigate to error page ... 0024:trace:msgbox:MSGBOX_OnInit L"There was a problem authenticating your account" 0140:err:ntdll:RtlpWaitForCriticalSection section 00E16800 "?" wait timed out in thread 0140, blocked by 0024, retrying (60 sec) --- snip --- Did anyone bother to test if this works nowadays on Windows? I wouldn't be surprised if that doesn't work either. Then you are beating a dead horse here. --- You should never rely on a Google-based platform for your application or service. Yes, that's true for other vendors as well but with Google it's a very persistent habit. https://killedbygoogle.com/ $ sha1sum picasa39-setup.exe 91fff14aec95a6bdc0d256f621dc363872309452 picasa39-setup.exe $ du -sh picasa39-setup.exe 15M picasa39-setup.exe $ wine --version wine-6.0-rc1 Regards -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971221 Title: Can not login to Picasa 3.9 under Wine To manage notifications about this bug go to: https://bugs.launchpad.net/wine/+bug/971221/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971221]
Hello joaopa, --- quote --- Indeed, connect to google in impossible with Picassa 3.9. Tested in a real windows XP box. --- quote --- thanks for the quick feedback. Resolving 'ABANDONED' here. Regards -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971221 Title: Can not login to Picasa 3.9 under Wine To manage notifications about this bug go to: https://bugs.launchpad.net/wine/+bug/971221/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 971221]
Only a white window appears with wine-5.22 I think it is safe to think the bug still occurs Can an administrator put the new link at URL place? http://www.oldversion.fr/windows/download/picasa-3-9-10-4 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/971221 Title: Can not login to Picasa 3.9 under Wine To manage notifications about this bug go to: https://bugs.launchpad.net/wine/+bug/971221/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
I can confirm Mike's result. However, I'm on Fedora 33 and kernel 5.8.15. [root@lappy-the-laptop ~]# dmesg | grep -i amd_g [root@lappy-the-laptop ~]# journalctl -k | grep -i amd_gpio [root@lappy-the-laptop ~]# modinfo pinctrl-amd filename: /lib/modules/5.8.15-301.fc33.x86_64/kernel/drivers/pinctrl/pinctrl-amd.ko.xz description:AMD GPIO pinctrl driver author: Ken Xue , Jeff Wu license:GPL v2 alias: acpi*:AMDI0030:* alias: acpi*:AMD0030:* depends: retpoline: Y name: pinctrl_amd vermagic: 5.8.15-301.fc33.x86_64 SMP mod_unload [root@lappy-the-laptop ~]# uname -r 5.8.15-301.fc33.x86_64 The pinctrl module I'm using is from the github repo -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 To manage notifications about this bug go to: https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905947] Re: lubuntu hirsute: display configuration doesn't survive logout/reboot
I booted opensuse tumbleweed again, tried again to re-create issue but failed. (numerous display changes, apply, then logout & login again.. repeated many times). opensuse is installed on hp8200 which I've not reported the issue on, but I doubt that's important, it also has fedora 33 which was impacted, and Lubuntu focal installed too. another QA-test install of hirsute daily on - hp dc7700 (c2d-e6320, 5gb, nvidia quadro nvs 290) post install adjust displays, logout & login again, changed monitor.settings got lost on re-login as back to defaults. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905947 Title: lubuntu hirsute: display configuration doesn't survive logout/reboot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxqt-config/+bug/1905947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906155] Re: USB Passthrough Fails on Start, Needs domain Reset
FYI, was able to get the following version of QEMU running (using the info at https://stackoverflow.com/questions/10817813/apparmor-causes-issues-on-libvirt-with-custom-qemu), QEMU emulator version 5.1.93 (v5.2.0-rc3) Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers No delta - still reacts the same. Thanks! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906155 Title: USB Passthrough Fails on Start, Needs domain Reset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1906155/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905029] Re: package terminus 1.12.0-1 failed to install/upgrade: installed terminus package post-installation script subprocess returned error exit status 2
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: terminus (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905029 Title: package terminus 1.12.0-1 failed to install/upgrade: installed terminus package post-installation script subprocess returned error exit status 2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/terminus/+bug/1905029/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1897185] Re: Laptop docked with lid closed, goes to sleep immediately on login
Another wrinkle since this week's kernel update in 20.04.1 (from 5.4.0.54.57 to 5.4.0.56.59: on every second or third startup in the UltraDock and with the external HDMI display as primary (which is where this suspend on login password problem occurs), the system now goes into never-never land instead of suspending. The external display stays active (doesn't go into power standby) but remains black; if I open the lid of the docked laptop it also usually remains black; the soft reboot (Alt+Prtscrn followed by REISUB) does nothing; so the only option is a hard power down. Wait 10-15 seconds and restart, and it's back to the usual suspend on entry of the login password. Please fix again, this bug affects every Ubuntu system here. All 20.04 and ThinkPads from T440 through T480 series; so older to practically new. Thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1897185 Title: Laptop docked with lid closed, goes to sleep immediately on login To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1897185/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1858227] Re: possible licensing issue
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: php-smbclient (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1858227 Title: possible licensing issue To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/php-smbclient/+bug/1858227/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906493] Re: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: initramfs-tools (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906493 Title: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1906493/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906965] [NEW] package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1
*** This bug is a duplicate of bug 1906493 *** https://bugs.launchpad.net/bugs/1906493 Public bug reported: Not sure if this is a new bug; please de0dyoe as necessary. ProblemType: Package DistroRelease: Ubuntu 20.04 Package: initramfs-tools 0.136ubuntu6.3 ProcVersionSignature: Ubuntu 4.15.0-118.119-generic 4.15.18 Uname: Linux 4.15.0-118-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Dec 5 17:22:38 2020 ErrorMessage: installed initramfs-tools package post-installation script subprocess returned error exit status 1 InstallationDate: Installed on 2013-07-20 (2695 days ago) InstallationMedia: Ubuntu-Server 12.04.2 LTS "Precise Pangolin" - Release amd64 (20130214) PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.5, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4 RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: initramfs-tools Title: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1 UpgradeStatus: Upgraded to focal on 2020-12-06 (0 days ago) ** Affects: initramfs-tools (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906965 Title: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1906965/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906965] Re: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1
*** This bug is a duplicate of bug 1906493 *** https://bugs.launchpad.net/bugs/1906493 Thank you for taking the time to report this crash and helping to make this software better. This particular crash has already been reported and is a duplicate of bug #1906493, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Tags removed: need-duplicate-check ** This bug has been marked a duplicate of bug 1906493 package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906965 Title: package initramfs-tools 0.136ubuntu6.3 failed to install/upgrade: installed initramfs-tools package post-installation script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/initramfs-tools/+bug/1906965/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
Hi Mike, On Sat, Dec 05, 2020 at 09:09:35PM -, Mike Boruta wrote: >Hello Coiby, > >Hmm, as far as I can tell the proper module is being used since I >executed the same steps for both the 5.7.19 and 5.8 kernels. I also >confirmed this by running `modinfo pinctrl_amd` and verifying that it is >no longer signed. I understand what you are saying regarding 0x51bc8, >maybe a different code path is being executed? Perhaps it would be best >for someone to independently confirm this before digging in further; I >have run through these steps a few times so I don't think I made a silly >mistake but anything is possible. Could you insert some pr_alert code to verify the updated module has been loaded? pr_alert("amd_gpio reg_val=%x, pin=%lu (LEVEL_LOW)", pin_reg, d->hwirq); You can also use the repo https://github.com/coiby/standalone_pinctrl_amd/tree/debug_for_Mike. And after the system getting rebooted, paste the result of `journalctl -k|grep amd_gpio` here? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 To manage notifications about this bug go to: https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906962] [NEW] bug in upgrading to focal fossa
Public bug reported: Impossible d'évaluer la mise à niveau Un problème insoluble est survenu lors du calcul de la mise à niveau. Cela a probablement été causé par : * des paquets logiciels non officiels qui ne proviennent pas d’Ubuntu. Veuillez utiliser la commande « ppa-purge » du paquet « ppa-purge » afin de supprimer les paquets d’un dépôt PPA Launchpad, puis essayez de relancer la mise à niveau. Si rien de tout cela ne s'applique, signalez ce bogue à l'aide de la commande « ubuntu-bug ubuntu-release-upgrader-core » dans un terminal. Si vous souhaitez analyser le problème par vous-même, les fichiers journaux contenus dans le répertoire « /var/log/dist-upgrade » contiennent les informations sur la mise à niveau. Plus précisément, veuillez consulter les journaux « main.log » et « apt.log ». ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: ubuntu-release-upgrader-core 1:18.04.41 ProcVersionSignature: Ubuntu 4.15.0-126.129-generic 4.15.18 Uname: Linux 4.15.0-126-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.20 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: ubuntu:GNOME Date: Sun Dec 6 00:47:21 2020 PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: ubuntu-release-upgrader UpgradeStatus: Upgraded to bionic on 2020-12-05 (0 days ago) VarLogDistupgradeTermlog: ** Affects: ubuntu-release-upgrader (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic dist-upgrade third-party-packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906962 Title: bug in upgrading to focal fossa To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1906962/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906919] ShellJournal.txt
apport information ** Attachment added: "ShellJournal.txt" https://bugs.launchpad.net/bugs/1906919/+attachment/5441355/+files/ShellJournal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906919 Title: Saving a file in gedit crashes desktop to login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1906919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906919] monitors.xml.txt
apport information ** Attachment added: "monitors.xml.txt" https://bugs.launchpad.net/bugs/1906919/+attachment/5441356/+files/monitors.xml.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906919 Title: Saving a file in gedit crashes desktop to login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1906919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906919] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1906919/+attachment/5441354/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906919 Title: Saving a file in gedit crashes desktop to login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1906919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906919] Re: Saving a file in gedit crashes desktop to login screen
apport information ** Tags added: apport-collected groovy wayland-session ** Description changed: When saving a file in gedit (or whatever the default text editor is) it crashes my entire desktop, and I end up on the login screen. ubuntu 20.10 + --- + ProblemType: Bug + ApportVersion: 2.20.11-0ubuntu50.2 + Architecture: amd64 + CasperMD5CheckResult: skip + CurrentDesktop: ubuntu:GNOME + DisplayManager: sddm + DistroRelease: Ubuntu 20.10 + InstallationDate: Installed on 2020-10-30 (36 days ago) + InstallationMedia: Ubuntu 20.10 "Groovy Gorilla" - Release amd64 (20201022) + NonfreeKernelModules: wl + Package: gnome-shell 3.38.1-1ubuntu1.1 + PackageArchitecture: amd64 + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=sv_SE.UTF-8 + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 5.8.0-31.33-generic 5.8.17 + RelatedPackageVersions: mutter-common 3.38.1-2ubuntu1 + Tags: wayland-session groovy + Uname: Linux 5.8.0-31-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo + _MarkForUpload: True ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1906919/+attachment/5441352/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906919 Title: Saving a file in gedit crashes desktop to login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1906919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906919] GsettingsChanges.txt
apport information ** Attachment added: "GsettingsChanges.txt" https://bugs.launchpad.net/bugs/1906919/+attachment/5441353/+files/GsettingsChanges.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906919 Title: Saving a file in gedit crashes desktop to login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1906919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1894329] Re: ZFS revert from grub menu not working.
This fixed the bug for me on 20.10 after I updated relevant zfs packages to 0.8.4-1ubuntu11.1 from groovy-proposed. After the update I installed a random package. Tried to revert to the snapshot created by apt. The package was not on my system. It worked. Then I reverted back the revert. The package was back on my system. Everything seems to work now. Thank you to everyone involved for the fix! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1894329 Title: ZFS revert from grub menu not working. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1894329/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906959] [NEW] `apt purge` does not remove /var/lib/docker
Public bug reported: Preface - I'm filing this against docker.io, but it might as well be a problem with apt. - I experienced this with the docker.io package, but I can imagine, that there are other packages out there, that have exactly the same problem. Please read this report as an example for a perhaps generic problem. What happened: === - `apt purge docker.io` does not remove docker's file directory `/var/lib/docker`. Therefore previously used images and other files will be left on the system. This might be expected using `apt remove`, but `apt purge` should remove "config files" as well. - The sysadmin does not get any messages, that there are files left on the system. Generic Problem: apt-get is supposed to manage files on a ubuntu machine. It fails to meet its goal in this case. Concrete description: == - This might be a difficult case, as docker images can be seen as "user files" (not config files). It would not be the right thing to remove those files. - The general user does probably not know about this directory. This is a very potential file graveyard on the system. - Upon installing no one tells the admin (in a clear, informative way), that there will be files create in `/var/lib/docker`. The information is hidden from the user. In that case, apt should be responsible for doing something about these files, if they get deleted. Suggestions / Solution (I don't have *the* solution for this problem. I guess it's necessary to discuss what's the right thing to do) My idea: Put them in $HOME/docker (or similar) instead of /var/lib/docker. (yes, they might be seen as "system wide user files", but I think real admins know how they could config paths and change the location while simple users immediately see that there's a `docker` folder in their home directory) Ubuntu 20.10 docker.io: Installed: (none) Candidate: 19.03.13-0ubuntu3 Version table: 19.03.13-0ubuntu3 500 500 http://archive.ubuntu.com/ubuntu groovy/universe amd64 Packages 100 /var/lib/dpkg/status ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: docker.io (not installed) ProcVersionSignature: Ubuntu 5.8.0-32.34-generic 5.8.18 Uname: Linux 5.8.0-32-generic x86_64 ApportVersion: 2.20.11-0ubuntu50.2 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Sun Dec 6 08:00:37 2020 SourcePackage: docker.io UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: docker.io (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906959 Title: `apt purge` does not remove /var/lib/docker To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/docker.io/+bug/1906959/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906958] [NEW] install crashes when installing boot loader on dual bootsystem
Public bug reported: I first deleted partitions on 4T HD so I could install Ubuntu 20.04 LTS on its own HD. Tried direct install from CD and crashed when trying to install boot loader to /dev/nvmeOnp1. I believe this is where the Windows 10 Home boot resides. It Froze the system and would not quit. Had to hard power off, power on and rebooted to Windows without problem. Tried "Try Ubuntu" and using the icon to install. Crashed same place. Tried again installing, crashed same place but this time it permitted me to report error. I have used older versions with this Windows 10 Home with no problems using same hardware. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: ubiquity 20.04.15.2 [modified: lib/partman/automatically_partition/question] ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44 Uname: Linux 5.4.0-42-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27.4 Architecture: amd64 CasperMD5CheckResult: pass CasperVersion: 1.445.1 CurrentDesktop: ubuntu:GNOME Date: Sat Dec 5 15:53:43 2020 InstallCmdLine: file=/cdrom/preseed/ubuntu.seed initrd=/casper/initrd quiet splash --- maybe-ubiquity LiveMediaBuild: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) ProcEnviron: LANGUAGE=en_US.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 LC_NUMERIC=C.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubiquity-20.04.15.2 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906958 Title: install crashes when installing boot loader on dual bootsystem To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1906958/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1292398] Re: Second screen position isn't saved from one session to another
On Ubuntu 19.10 I'm experiencing the same thing as the comment above: ### Jan B (hey-e) wrote on 2015-04-08: #143 I have a laptop and a monitor as secondary display ... Every time I switch back from only using the monitor (laptop display disabled) to using the laptop display as a second screen – I need to rearrange the displays. By default they are side-by-side but I always want the monitor above the laptop display. ### I don't have Ubuntu 20.x installed at the moment to confirm whether it happens there, too. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1292398 Title: Second screen position isn't saved from one session to another To manage notifications about this bug go to: https://bugs.launchpad.net/elementaryos/+bug/1292398/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905579] Re: parted crashes with invalid pointer on resizepart
** Changed in: parted (Ubuntu Bionic) Assignee: Eric Desrochers (slashd) => (unassigned) ** Changed in: parted (Ubuntu Xenial) Assignee: Eric Desrochers (slashd) => (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905579 Title: parted crashes with invalid pointer on resizepart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1905579/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905579] Re: parted crashes with invalid pointer on resizepart
Thanks, Marcus, for your time testing the 'parted' proposed package in focal. - Eric ** Tags removed: verification-needed-focal ** Tags added: verification-dome-focal ** Tags removed: verification-dome-focal ** Tags added: verification-done-focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905579 Title: parted crashes with invalid pointer on resizepart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1905579/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905579] Re: parted crashes with invalid pointer on resizepart
Confirmed that it fixed the issue on focal for me. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905579 Title: parted crashes with invalid pointer on resizepart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1905579/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905579] Re: parted crashes with invalid pointer on resizepart
[VERIFICATION FOCAL] I have tested with the package currently found in focal-proposed, and I confirmed the package '3.3-4ubuntu0.20.04.1' fixes the free() invalid pointer problem during a resize partition operation. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905579 Title: parted crashes with invalid pointer on resizepart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1905579/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906496] Re: mgr can be very slow in a large ceph cluster
** Changed in: ceph (Ubuntu) Status: New => Incomplete ** Changed in: ceph (Ubuntu) Status: Incomplete => New ** Changed in: ceph (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906496 Title: mgr can be very slow in a large ceph cluster To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ceph/+bug/1906496/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1662244] Re: lightdm causes all greeters to fail to start
Upgrading to (K)Ubuntu 18.04.5 LTS basically broke the system as X was not restarting correctly (black screen instead of lightdm display or even infinite loop of X crashes based on BIOS/EFI config). This is critical for non-savvy users as my parents. The issue is the same as can be seen in /var/log/lightdm/seat0-greeter.log with repeated messages like **MEMORY-ERROR***: unity-greeter[1647]: GSlice: failed to allocate 2040 bytes (alignment: 2048)... **MEMORY-ERROR***: unity-greeter[1647]: GSlice: failed to allocate 2040 bytes (alignment: 2048)... **MEMORY-ERROR***: unity-greeter[1647]: GSlice: failed to allocate 2040 bytes (alignment: 2048)... The workaround is indded updating the memlock limits as described above (adding the 2 lines of the above comment to /etc/security/limits.con). Thanks for the workaround :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1662244 Title: lightdm causes all greeters to fail to start To manage notifications about this bug go to: https://bugs.launchpad.net/lightdm/+bug/1662244/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905623] Re: df: /run/user/1000/doc: Operation not permitted
Just to note, a huge number of other file systems don't show: $ grep fuse /proc/mounts fusectl /sys/fs/fuse/connections fusectl rw,nosuid,nodev,noexec,relatime 0 0 https://sd2dav.1und1.de/ /media/jak/smartdrive fuse rw,nosuid,nodev,noexec,relatime,user_id=1000,group_id=1000,allow_other,max_read=16384 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 portal /run/user/1000/doc fuse.portal rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 keybase-redirector /keybase fuse ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other 0 0 /dev/fuse /run/user/1000/keybase/kbfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 $ /usr/bin/df -T | grep fuse /usr/bin/df: /run/user/1000/doc: Operation not permitted https://sd2dav.1und1.de/ fuse 12 8 53332 61% /media/jak/smartdrive /dev/fuse fuse 262144000 1 262144000 1% /run/user/1000/keybase/kbfs Looking at some of them: $ stat -f /keybase/ File: "/keybase/" ID: 0Namelen: 0 Type: fuseblk Block size: 0 Fundamental block size: 0 Blocks: Total: 0 Free: 0 Available: 0 Inodes: Total: 0 Free: 0 $ stat -f /run/user/1000/gvfs File: "/run/user/1000/gvfs" ID: 0Namelen: 1024Type: fuseblk Block size: 4096 Fundamental block size: 4096 Blocks: Total: 0 Free: 0 Available: 0 Inodes: Total: 0 Free: 0 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905623 Title: df: /run/user/1000/doc: Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1905623/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878919] Re: kworker/0:1+kacpid uses 100% of one CPU core
I apologise. I didn't made the time to address this issue properly, but I wanted to just leave some information in case it helps others. I did several upgrades of the kernel version (up not down) without success. My last was 5.8.13, without success. When I was upgrading to version 20.10, I had to stop the process. This stop left the system on an intermediate state (just in case this means something to someone). I restart the process after but the nvidea drivers were not being loaded (using the 5.8.13 kernel, not the one from 20.10). Since then, the problem disapear. It has been 3 or 4 weeks whitout any issues. I'm not saying that it's the graphic card drivers that produced the error. Since I don't use it, I didn't try yet to fix it and I also wanted to see if it was really gone (sometimes it happens often others ...). Just leaving some information in case it helps. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878919 Title: kworker/0:1+kacpid uses 100% of one CPU core To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1878919/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905579] Re: parted crashes with invalid pointer on resizepart
[VERIFICATION GROOVY] I have tested with the package currently found in groovy-proposed, and I confirmed the package '3.3-4ubuntu0.20.10.1' fixes the free() invalid pointer problem during a resize partition operation. ** Tags removed: verification-needed-groovy ** Tags added: verification-done-groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905579 Title: parted crashes with invalid pointer on resizepart To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1905579/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906957] [NEW] Boot hangs at "Loading initial ramdisk" with linux-image-unsigned-4.4.0-194-generic and 197-generic
Public bug reported: Hello, My laptop was working fine up to "linux-image- unsigned-4.4.0-193-generic". I regularly updates the system with "sudo apt-get update && safe-upgrade". But now it fails to boot with both linux-image-unsigned-4.4.0-194-generic and linux-image- unsigned-4.4.0-197-generic. Meanwhile, booting in failsafe mode is ok with linux-image-unsigned-4.4.0-197-generic but the graphic driver doesn't seem to be properly started as I have only one screen with poor resolution. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-193-generic (not installed) ProcVersionSignature: Ubuntu 4.4.0-193.224-generic 4.4.236 Uname: Linux 4.4.0-193-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.27 Architecture: amd64 CurrentDesktop: Unity Date: Sat Dec 5 22:39:00 2020 SourcePackage: linux-signed UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-signed (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906957 Title: Boot hangs at "Loading initial ramdisk" with linux-image- unsigned-4.4.0-194-generic and 197-generic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-signed/+bug/1906957/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906956] [NEW] Long sink/source names cause unreasonably sized window
Public bug reported: Very long sink/source names, such as those created when using pulseaudio's module-echo-cancel, force the pavumeter window to be wide enough to fit the name on a single line (see attached screenshot). It might be nice to allow the source's name to be wrapped or truncated so the user can choose a more reasonable window shape. -- Version info: OS: Ubuntu 20.04.1 LTS pavumeter: 0.9.3-4build3 ** Affects: pavumeter (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Screenshot of pavumeter window with long source name" https://bugs.launchpad.net/bugs/1906956/+attachment/5441339/+files/long_pavu_meter.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906956 Title: Long sink/source names cause unreasonably sized window To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pavumeter/+bug/1906956/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1901689] Re: Merge steam 1.0.0.67-2 from debian sid to ubuntu hirsute
** Summary changed: - Merge steam 1.0.0.66-2 from debian sid to ubuntu hirsute + Merge steam 1.0.0.67-2 from debian sid to ubuntu hirsute -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1901689 Title: Merge steam 1.0.0.67-2 from debian sid to ubuntu hirsute To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/steam/+bug/1901689/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1510731] Re: Bug in ubiquity-frontend-kde: Can't create LUKS encrypted volumes during manual disk setup in Kubuntu 17.10 (does not affect Ubuntu, Ubuntu MATE, or Ubuntu Budgie)
Still not working in 20.10. Is there any hope on this getting fixed? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1510731 Title: Bug in ubiquity-frontend-kde: Can't create LUKS encrypted volumes during manual disk setup in Kubuntu 17.10 (does not affect Ubuntu, Ubuntu MATE, or Ubuntu Budgie) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1510731/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1741767] Re: Muon rebuilds search index very often and inefficient
** Changed in: muon Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1741767 Title: Muon rebuilds search index very often and inefficient To manage notifications about this bug go to: https://bugs.launchpad.net/muon/+bug/1741767/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1741767]
Apologies, I incorrectly set the status to 'reported' when in actuality the bug is most likely gone by now! Therefore setting the status to 'resolved, worksforme'. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1741767 Title: Muon rebuilds search index very often and inefficient To manage notifications about this bug go to: https://bugs.launchpad.net/muon/+bug/1741767/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1741767]
Contrary to earlier experiences, I do not see this behaviour anymore with Muon 5.8.0 under KDE Neon 5.19.4 (based on Ubuntu 18.04) and 5.20.4 (based on Ubuntu 20.04). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1741767 Title: Muon rebuilds search index very often and inefficient To manage notifications about this bug go to: https://bugs.launchpad.net/muon/+bug/1741767/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05
Hello Coiby, Hmm, as far as I can tell the proper module is being used since I executed the same steps for both the 5.7.19 and 5.8 kernels. I also confirmed this by running `modinfo pinctrl_amd` and verifying that it is no longer signed. I understand what you are saying regarding 0x51bc8, maybe a different code path is being executed? Perhaps it would be best for someone to independently confirm this before digging in further; I have run through these steps a few times so I don't think I made a silly mistake but anything is possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1887190 Title: MSFT Touchpad not working on Lenovo Legion-5 15ARH05 To manage notifications about this bug go to: https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1741767]
Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1741767 Title: Muon rebuilds search index very often and inefficient To manage notifications about this bug go to: https://bugs.launchpad.net/muon/+bug/1741767/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1896091] Re: [i915] Noise-like lines of graphics corruption when moving windows in Xorg sessions
I think we've gotten enough (independent) verifications of this now to mark it as done. ** Tags removed: verification-needed-groovy ** Tags added: verification-done-groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1896091 Title: [i915] Noise-like lines of graphics corruption when moving windows in Xorg sessions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1896091/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1892374] Re: Ubuntu Mate shows no icons when using brazilian portuguese
*** This bug is a duplicate of bug 1891891 *** https://bugs.launchpad.net/bugs/1891891 Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: ubuntu-mate-meta (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1892374 Title: Ubuntu Mate shows no icons when using brazilian portuguese To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-mate-meta/+bug/1892374/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905623] Re: df: /run/user/1000/doc: Operation not permitted
** Changed in: coreutils (Ubuntu) Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905623 Title: df: /run/user/1000/doc: Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1905623/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906952] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906952 Title: Wifi freezes, hangs whole computer sometimes, no internet working despite everything fine with connection, route & wifi connected too To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906952/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884232] Re: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N)
Actually, it looks like the pen is working in X11. Never mind that part. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884232 Title: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884232/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1766230] Re: Strange window matching behaviour between Slack and Chrome
Seeing the same on a fresh 20.04.1 install with snap Slack and deb Vivaldi (chromium-based). However, if I close Slack and Vivaldi both, and reopen Vivaldi (`ps aux | grep slack` is empty), it shows up under the Slack context anyway. Actual usability is not impacted, just a confusing user experience. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1766230 Title: Strange window matching behaviour between Slack and Chrome To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1766230/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906952] [NEW] Wifi freezes, hangs whole computer sometimes, no internet working despite everything fine with connection, route & wifi connected too
Public bug reported: Wifi device freezes consistently, haven't worked with WiFi since last month, using USB tethering from phone to use internet, with that method everything is working smooth, but as soon as WiFi is switched on, 90 precent chance, that I'll have to restart laptop ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-54-generic 5.4.0-54.60 ProcVersionSignature: Ubuntu 5.4.0-54.60-generic 5.4.65 Uname: Linux 5.4.0-54-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.12 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ansh 1601 F pulseaudio CRDA: global country IN: DFS-UNSET (2402 - 2482 @ 40), (N/A, 20), (N/A) (5150 - 5350 @ 160), (N/A, 23), (N/A) (5725 - 5875 @ 80), (N/A, 23), (N/A) CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sun Dec 6 02:13:49 2020 InstallationDate: Installed on 2020-10-04 (62 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Dell Inc. XPS 15 9570 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-54-generic root=UUID=c9a4a52c-1fe3-4192-b898-0f8f974f2f43 ro quiet splash pcie_aspm=off vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-54-generic N/A linux-backports-modules-5.4.0-54-generic N/A linux-firmware1.187.6 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/09/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.17.1 dmi.board.name: 0D0T05 dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.17.1:bd07/09/2020:svnDellInc.:pnXPS159570:pvr:rvnDellInc.:rn0D0T05:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 15 9570 dmi.product.sku: 087C dmi.sys.vendor: Dell Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906952 Title: Wifi freezes, hangs whole computer sometimes, no internet working despite everything fine with connection, route & wifi connected too To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906952/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905623] Re: df: /run/user/1000/doc: Operation not permitted
> I probably don't, but have no idea want it actually does. It provides safe access to files on your disk to snaps or flatpaks. > You can silence this with "df -x fuse.portal" Odd, when I tried it didn't work for me, maybe I made a typo. Added a task for coreutils - we should ignore fuse.portal in any case, regardless of whether the portal code gets fixed or not, because it's not a real file system that has an actual size. ** Also affects: coreutils (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905623 Title: df: /run/user/1000/doc: Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1905623/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876157] Re: Memtest86+ in Ubuntu 20.04 doesn't work, switch to Coreboot branch or package new release v5.31b is available since 12/04/2020
Same problem with HP Elitebook 745 G2, 2x8GB DDR3-1600. memtest from ubuntu 20.04.1 installer (memtest-5.01) freezes after two seconds (first test at 51%). This happers every time. Tested single RAM chip at a time. memtest from ubuntu 18.04.2 installer (memtest-5.01) works. I run it for 10h with both RAM chips attached without problems. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876157 Title: Memtest86+ in Ubuntu 20.04 doesn't work, switch to Coreboot branch or package new release v5.31b is available since 12/04/2020 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/memtest86+/+bug/1876157/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884232] Re: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N)
Thank you for the workaround! With the latest Ubuntu this works with just the "pci=nocrs" parameter. The pen input works fully in Wayland, but not at all in X11. Also, I wrote an installation guide for this laptop with more fixes and tips: https://sciactive.com/2020/12/04/how-to-install-ubuntu-on-acer-spin-5-sp513-54n-for-the-perfect-linux-2-in-1/ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884232 Title: touchpad and touchscreen doesn't work at all on ACER Spin 5 (SP513-54N) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884232/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906950] [NEW] package memtest86+ 5.01-3.1ubuntu4 failed to install/upgrade: o subprocesso instalado, do pacote memtest86+, o script post-installation retornou erro do status de saída 1
Public bug reported: ProblemType: Package DistroRelease: Ubuntu 20.10 Package: memtest86+ 5.01-3.1ubuntu4 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.20.11-0ubuntu50.2 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Dec 5 15:16:50 2020 ErrorMessage: o subprocesso instalado, do pacote memtest86+, o script post-installation retornou erro do status de saída 1 InstallationDate: Installed on 2020-12-05 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) Python3Details: /usr/bin/python3.8, Python 3.8.6, python3-minimal, 3.8.6-0ubuntu1 PythonDetails: N/A RelatedPackageVersions: dpkg 1.20.5ubuntu2 apt 2.1.10 SourcePackage: memtest86+ Title: package memtest86+ 5.01-3.1ubuntu4 failed to install/upgrade: o subprocesso instalado, do pacote memtest86+, o script post-installation retornou erro do status de saída 1 UpgradeStatus: Upgraded to groovy on 2020-12-05 (0 days ago) ** Affects: memtest86+ (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906950 Title: package memtest86+ 5.01-3.1ubuntu4 failed to install/upgrade: o subprocesso instalado, do pacote memtest86+, o script post- installation retornou erro do status de saída 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/memtest86+/+bug/1906950/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
> Why is it not possible to report a bug directly to the "Ubuntu Kernel Team"? Because this way (reporting it against the package) DOES report it to the correct team. Ubuntu does stuff automatically so you don't have to. :) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906947] Re: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10
apw - I'll leave this to you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906947 Title: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wireguard-linux-compat/+bug/1906947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1871962] Re: NETDEV WATCHDOG: enx106530060c6c (r8152): transmit queue 0 timed out
I have this seemingly related bug: When I connect to my ThinkPad Thunderbolt 3 dock with a ThinkPad X1 Carbon (6th Gen) using Ubuntu 20.10, after a few hours the NIC stops working: Dec 5 00:28:58 davido-thinkpad kernel: [46349.075202] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:04 davido-thinkpad kernel: [46354.963230] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:09 davido-thinkpad kernel: [46359.827136] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:14 davido-thinkpad kernel: [46364.947149] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:19 davido-thinkpad kernel: [46370.067211] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:25 davido-thinkpad kernel: [46375.955090] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:30 davido-thinkpad kernel: [46381.075069] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:36 davido-thinkpad kernel: [46386.963098] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:41 davido-thinkpad kernel: [46391.827108] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:46 davido-thinkpad kernel: [46396.947053] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:51 davido-thinkpad kernel: [46402.067077] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:29:57 davido-thinkpad kernel: [46407.954960] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:02 davido-thinkpad kernel: [46413.075025] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:08 davido-thinkpad kernel: [46418.962792] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:13 davido-thinkpad kernel: [46423.826987] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:18 davido-thinkpad kernel: [46428.946952] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:23 davido-thinkpad kernel: [46434.066892] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:29 davido-thinkpad kernel: [46439.954816] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:34 davido-thinkpad kernel: [46445.074832] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:40 davido-thinkpad kernel: [46450.962763] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:45 davido-thinkpad kernel: [46455.826743] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:46 davido-thinkpad NetworkManager[945]: [1607153446.6029] manager: NetworkManager state is now CONNECTED_SITE Dec 5 00:30:46 davido-thinkpad NetworkManager[945]: [1607153446.6072] manager: NetworkManager state is now CONNECTED_LOCAL Dec 5 00:30:46 davido-thinkpad NetworkManager[945]: [1607153446.6075] manager: NetworkManager state is now CONNECTED_SITE Dec 5 00:30:46 davido-thinkpad NetworkManager[945]: [1607153446.6077] policy: set 'Wired connection 2' (enx0050b6a7622b) as default for IPv4 routing and DNS Dec 5 00:30:46 davido-thinkpad dbus-daemon[943]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.9' (uid=0 pid=945 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined") Dec 5 00:30:46 davido-thinkpad deja-dup-monito[25858]: Source ID 448 was not found when attempting to remove it Dec 5 00:30:46 davido-thinkpad systemd[1]: Starting Network Manager Script Dispatcher Service... Dec 5 00:30:46 davido-thinkpad dbus-daemon[943]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 5 00:30:46 davido-thinkpad systemd[1]: Started Network Manager Script Dispatcher Service. Dec 5 00:30:50 davido-thinkpad kernel: [46460.946787] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:52 davido-thinkpad whoopsie[5431]: [00:30:52] Cannot reach: https://daisy.ubuntu.com Dec 5 00:30:55 davido-thinkpad kernel: [46466.066797] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:30:57 davido-thinkpad systemd[1]: NetworkManager-dispatcher.service: Succeeded. Dec 5 00:31:01 davido-thinkpad kernel: [46471.954734] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:06 davido-thinkpad kernel: [46477.074659] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:12 davido-thinkpad kernel: [46482.962741] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:17 davido-thinkpad kernel: [46487.826611] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:22 davido-thinkpad kernel: [46492.946592] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:27 davido-thinkpad kernel: [46498.03] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:33 davido-thinkpad kernel: [46503.954576] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:38 davido-thinkpad kernel: [46509.074528] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout Dec 5 00:31:44 davido-thinkpad kernel: [46514.962608] r8152 6-1:1.0 enx0050b6a7622b: Tx timeout This TB3 dock is known to work relatively flawlessly with the same model laptop under Ubuntu 20.04, and on the same model laptop under Centos7. Kernel info: davido@davido-thinkpad:~$ uname -a Linux davido-thinkpad 5.8.0-31-generic
[Bug 1906949] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906949 Title: ext4_find_entry:1531 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906949/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906949] [NEW] ext4_find_entry:1531
Public bug reported: Installed Ubunutu 20.04 on a fresh machine, ASRock b450 Pro4 with a Kingston A2000 1TB PCI Express 3.0 x4 M.2 2280 in the M.2 Ultra slot. Randomly, got freezes with only cursor moving on screen and after a few minutes i'd get a black screen with errors, EXT4-fs error (device nvme0n1p2): _ext4_find_entry: 1531 and Failed to write entry, ignoring: Read-only file system. (attached photo) I am a fresh Ubuntu user, not really tech savy, help would be greatly appreciated. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-56-generic 5.4.0-56.62 ProcVersionSignature: Ubuntu 5.4.0-56.62-generic 5.4.73 Uname: Linux 5.4.0-56-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: claus 1354 F pulseaudio /dev/snd/controlC1: claus 1354 F pulseaudio /dev/snd/pcmC1D0p: claus 1354 F...m pulseaudio /dev/snd/timer: claus 1354 f pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Sat Dec 5 21:36:02 2020 InstallationDate: Installed on 2020-12-01 (3 days ago) InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731) IwConfig: enp8s0no wireless extensions. lono wireless extensions. MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-56-generic root=UUID=6c1a0898-4be8-465f-b69f-87c3a0d49cd4 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-56-generic N/A linux-backports-modules-5.4.0-56-generic N/A linux-firmware1.187.4 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/18/2020 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P4.20 dmi.board.name: B450 Pro4 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP4.20:bd06/18/2020:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnB450Pro4:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ** Attachment added: "WhatsApp Image 2020-12-05 at 21.44.27.jpeg" https://bugs.launchpad.net/bugs/1906949/+attachment/5441294/+files/WhatsApp%20Image%202020-12-05%20at%2021.44.27.jpeg -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906949 Title: ext4_find_entry:1531 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906949/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1868703] Re: Support "ad_use_ldaps" flag for new AD requirements (ADV190023)
** Tags removed: sts-sponsor sts-sponsor-slashd verification-done-bionic ** Tags added: verification-failed-bionic -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1868703 Title: Support "ad_use_ldaps" flag for new AD requirements (ADV190023) To manage notifications about this bug go to: https://bugs.launchpad.net/cyrus-sasl2/+bug/1868703/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1903574] Re: isenkram-lookup crashed with SIGSEGV in g_type_check_instance_cast()
Ok, Matthias, added a gobject-introspection bug task. ** Also affects: gobject-introspection (Ubuntu) Importance: Undecided Status: New ** Changed in: gobject-introspection (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1903574 Title: isenkram-lookup crashed with SIGSEGV in g_type_check_instance_cast() To manage notifications about this bug go to: https://bugs.launchpad.net/gobject-introspection/+bug/1903574/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1792934] Re: symlink loop detected in path 'usr/share/doc/module-init-tools/changelog.Debian.gz'
** Also affects: module-init-tools (Ubuntu) Importance: Undecided Status: New ** Also affects: kmod (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1792934 Title: symlink loop detected in path 'usr/share/doc/module-init- tools/changelog.Debian.gz' To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debsums/+bug/1792934/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1902156] Re: [ASUS VivoBook X541UJ] Keyboard and touchpad don't work on kernel 5.8.0.29, but 5.4 or 5.8.16 work
the issue is fixed (at least for my laptop model) in version 5.8.0-31-generic ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1902156 Title: [ASUS VivoBook X541UJ] Keyboard and touchpad don't work on kernel 5.8.0.29, but 5.4 or 5.8.16 work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1902156/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
And the USB audio device works as well with 5.4.0-57.63 . Marking the bug as "Fix Released". When this kernel migrates from proposed into the updates pocket, the bug will be fixed. It will be necessary to select the 5.4.0-54-lowlatency in the Grub menu in order to have the internet to be able to update to 5.4.0-57.63. ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906947] Re: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906947 Title: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wireguard-linux-compat/+bug/1906947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906947] [NEW] package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10
Public bug reported: On attempted upgrade from 18.04LTS to 20LTS ProblemType: Package DistroRelease: Ubuntu 20.04 Package: wireguard-dkms 1.0.20201112-1~20.04.1 ProcVersionSignature: Ubuntu 4.15.0-50.54-generic 4.15.18 Uname: Linux 4.15.0-50-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Dec 5 18:27:09 2020 ErrorMessage: installed wireguard-dkms package post-installation script subprocess returned error exit status 10 InstallationDate: Installed on 2020-12-04 (1 days ago) InstallationMedia: PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.5, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: wireguard-linux-compat Title: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10 UpgradeStatus: Upgraded to focal on 2020-12-05 (0 days ago) ** Affects: wireguard-linux-compat (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906947 Title: package wireguard-dkms 1.0.20201112-1~20.04.1 failed to install/upgrade: installed wireguard-dkms package post-installation script subprocess returned error exit status 10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/wireguard-linux-compat/+bug/1906947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1838151] Re: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs).
It seems that on Ubuntu 20.10 it is fixed by installing pulseaudio- modules-bt (which also uninstalls pulseaudio-module-bluetooth) from this ppa: https://launchpad.net/~berglh/+archive/ubuntu/pulseaudio-a2dp Then: > sudo systemctl restart pulseaudio > pulseaudio -k Did just a few tests with Google Duo with my Jabra Elite Active 65t buds, and the sound is a LOT better both on my and the other end! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1838151 Title: Poor quality audio with modern Bluetooth headsets in HSP/HFP. Missing wide band speech support (Bluetooth A2DP codecs). To manage notifications about this bug go to: https://bugs.launchpad.net/pulseaudio/+bug/1838151/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906092] Re: Echoping segfaults when installing smokeping
Sent report and also uploading the crash file from (var/crash) for reference if needed. ** Attachment added: "crash.txt" https://bugs.launchpad.net/ubuntu/+source/unscd/+bug/1906092/+attachment/5441284/+files/crash.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906092 Title: Echoping segfaults when installing smokeping To manage notifications about this bug go to: https://bugs.launchpad.net/smokepingjuju/+bug/1906092/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906946] [NEW] please sync rust-signal-hook 0.1.13-1 from sid
Public bug reported: It seems like rust-signal-hook was removed from ubuntu on 2020-09-14 because of a missing dependency, rust-tokio-reactor. As rust-tokio-reactor 0.1.8-2 was successfully synced from debian on 2020-11-05, rust-signal-hook could be included again, as well. This would be helpful as it would fix the build of rust-condure, see https://launchpad.net/ubuntu/+source/rust- condure/1.1.0-1/+build/20367268 Thanks! ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906946 Title: please sync rust-signal-hook 0.1.13-1 from sid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1906946/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1466150] Re: grub-install breaks when ESP is on raid
Tony Middleton (@ximera) wrote (https://bugs.launchpad.net/ubuntu/+source/grub- installer/+bug/1466150/comments/36): > Since focal the change I originally asked for at the beginning of this thread has now been made. > If you set up multi efi partitions, not raided, when you run "dpkg-reconfigure grub-efi-amd64" the system asks which efi partitions you wish to use. You can specify more than one and it then installs to each of them. It remembers the choice next time grub is updated via apt. I've just tested this and it works as described. However, grub-efi-amd64 wasn't installed on my freshly installed 20.04 Ubuntu system. Installed was grub-efi-amd64-signed. And 'dpkg-reconfigure grub-efi-amd64-signed' didn't prompt for anything! So, I installed grub-efi-amd64 and removed grub-efi-amd64-signed for the test. --- Seth Arnold @seth-arnold wrote (https://bugs.launchpad.net/ubuntu/+source/grub- installer/+bug/1466150/comments/39): > The tooling now making it easy to install to multiple partitions is a definite improvement over the previous state. I agree, it's an improvement. However, while searching for Ubuntu's solution to the making-ESP-somehow-redundant problem I couldn't find any documentation that points to this tooling/approach. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1466150 Title: grub-install breaks when ESP is on raid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1466150/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906515] Re: Bluetooth : No device found (rtl8822cu)
Something about patches here : http://patchwork.ozlabs.org/project/ubuntu-kernel/list/?series=138556 But I don't understand how to do something with this. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906515 Title: Bluetooth : No device found (rtl8822cu) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906515/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
I have not looked into the reason what happened in 5.4.0-56-lowlatency kernel to cause the problem, but I can confirm that installing version 5.4.0-57.63 from focal-proposed fixes the problem. I have my network back! I am yet to test my USB audio card. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906945] [NEW] package texlive-base 2019.20200218-1 failed to install/upgrade: Versuch, »/usr/share/doc/texlive-doc/generic/iftex/iftex.pdf« zu überschreiben, welches auch in Paket texlive-plain-
Public bug reported: no further information ProblemType: Package DistroRelease: Ubuntu 20.04 Package: texlive-base 2019.20200218-1 ProcVersionSignature: Ubuntu 5.4.0-56.62-generic 5.4.73 Uname: Linux 5.4.0-56-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip Date: Sat Dec 5 17:35:59 2020 ErrorMessage: Versuch, »/usr/share/doc/texlive-doc/generic/iftex/iftex.pdf« zu überschreiben, welches auch in Paket texlive-plain-generic 2017.20180305-2 ist InstallationDate: Installed on 2019-08-09 (483 days ago) InstallationMedia: Ubuntu 18.04.3 LTS "Bionic Beaver" - Release amd64 (20190805) PackageArchitecture: all Python3Details: /usr/bin/python3.8, Python 3.8.5, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: /usr/bin/python2.7, Python 2.7.18, python-is-python2, 2.7.17-4 RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: texlive-base Title: package texlive-base 2019.20200218-1 failed to install/upgrade: Versuch, »/usr/share/doc/texlive-doc/generic/iftex/iftex.pdf« zu überschreiben, welches auch in Paket texlive-plain-generic 2017.20180305-2 ist UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: texlive-base (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906945 Title: package texlive-base 2019.20200218-1 failed to install/upgrade: Versuch, »/usr/share/doc/texlive-doc/generic/iftex/iftex.pdf« zu überschreiben, welches auch in Paket texlive-plain-generic 2017.20180305-2 ist To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/texlive-base/+bug/1906945/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1905623] Re: df: /run/user/1000/doc: Operation not permitted
> If you don't want to this fuse fs to be created I probably don't, but have no idea want it actually does. > then either remove xdg-desktop-portal package or mask xdg-document- portal.service with: Thanks. The masking worked fine. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1905623 Title: df: /run/user/1000/doc: Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xdg-desktop-portal/+bug/1905623/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1903574] Re: isenkram-lookup crashed with SIGSEGV in g_type_check_instance_cast()
Not really fixed, AppStream has an incomplete workaround for the gobject-introspection bug (which may break at any time for new functions in either Python or Vala, if we aren't super careful). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1903574 Title: isenkram-lookup crashed with SIGSEGV in g_type_check_instance_cast() To manage notifications about this bug go to: https://bugs.launchpad.net/gobject-introspection/+bug/1903574/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
It's not just me who reported this. Is also in askubuntu: https://askubuntu.com/questions/1296943/irq-conflict-between-ethernet- port-and-usb-2-controller-with-linux-5-4-0-56-lowl Because that has nothing to do with Ubuntu Studio alone. I reported it here under linux (ubuntu). For the “Ubuntu Kernel Team” a short question? https://wiki.ubuntu.com/KernelTeam refers to: The Ubuntu Kernel Team is in Launchpad as: https://launchpad.net/~ubuntu-kernel-team this is the moderated public team in which we interact with the Ubuntu Community. Why is it not possible to report a bug directly to the "Ubuntu Kernel Team". Even if that's such an old page. why is this not deleted? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906943] [NEW] package libsasl2-2:i386 2.1.27+dfsg-2 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration
Public bug reported: Happened during the installation of WineHQ stable ProblemType: Package DistroRelease: Ubuntu 20.04 Package: libsasl2-2:i386 2.1.27+dfsg-2 ProcVersionSignature: Ubuntu 5.4.0-56.62-generic 5.4.73 Uname: Linux 5.4.0-56-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.13 Architecture: amd64 CasperMD5CheckResult: skip Date: Sun Dec 6 01:03:26 2020 ErrorMessage: package is in a very bad inconsistent state; you should reinstall it before attempting configuration PackageArchitecture: i386 Python3Details: /usr/bin/python3.8, Python 3.8.5, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: dpkg 1.19.7ubuntu3 apt 2.0.2ubuntu0.1 SourcePackage: cyrus-sasl2 Title: package libsasl2-2:i386 2.1.27+dfsg-2 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: cyrus-sasl2 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package focal i386 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906943 Title: package libsasl2-2:i386 2.1.27+dfsg-2 failed to install/upgrade: package is in a very bad inconsistent state; you should reinstall it before attempting configuration To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cyrus-sasl2/+bug/1906943/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906155] Re: USB Passthrough Fails on Start, Needs domain Reset
OK, some interesting findings :-). And back to thinking it may be QEMU related? Let me explain, by all means disagree! 1) I found that using OpenCore with macOS, I no longer need a custom UEFI. So, I tried the UEFI that comes with Ubuntu (apt install ovmf, copied the files over). No change. So then, I cloned and built the latest UEFI from Tianocore / EDK II (https://github.com/tianocore/edk2). Copied that over (and VARS, default), no delta. And as I can't get into the UEFI menu on VM startup (i.e. press ESC, F2, etc.) ... seems to be OS independent, just an issue between UEFI and QEMU - agreed? 2) Figured I'd try to clone, build and run the latest version of QEMU, see if that is it - FYI, the current version in Ubuntu that I'm running is, QEMU emulator version 5.0.0 (Debian 1:5.0-5ubuntu9.2) Copyright (c) 2003-2020 Fabrice Bellard and the QEMU Project developers OK, that said ... I can build, install => but can't get apparmor to let me run my custom QEMU executable (arrgh!). I even tried disabling security_driver (set to "none" in /etc/libvirt/qemu.conf, restarted libvirtd.service) ... but no joy. Can't get the latest QEMU to run. Any thoughts here would be appreciated! This is to see if it's an "older" issue, and may be resolved already. 3) An interesting side note, when I did get into the UEFI menu (post VM reset), changed the resolution ... I could no longer boot (fully) my guest OS. Had to reboot my host OS (Ubuntu), then all OK. Very odd, but an observation :-). Thanks for all the help! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906155 Title: USB Passthrough Fails on Start, Needs domain Reset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1906155/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
As this issue is not specific to Ubuntu Studio, and since this has *not* been verified by anybody but the bug reporter, I removed Ubuntu Studio Developers from this bug and changed it to "New". The lowlatency kernel has many, many more use cases than audio, hence it is no longer developed or managed by the Ubuntu Studio team. This is an Ubuntu kernel issue completely, and in no way should the Ubuntu Studio Development team be involved here as that is too much workload on an already strained and low-numbered team. ** Changed in: linux (Ubuntu) Status: Confirmed => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1906913] Re: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel
** Changed in: linux (Ubuntu) Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1906913 Title: IRQ conflict between Ethernet and USB with linux 5.4.0-56-lowlatency kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1906913/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs