[Bug 1548581] Re: using wacom tablet crashes the whole system in 16.04
Lot's of users have issue with kernel 4.4 and wacom tablets, my wacom freezes my Arch-linux and nothing, even kernel panic message wont get into my journal logs, it just ok and then everything freezes, cant tty cant nothing, you are not alone, my wacom works allright on 4.3 kernel, so you might want to try that series or if your tablet is older, try kernel 4.1 series. We can only hope it will be fixed in 4.5 (as many wacom devs said it has been merged to it), I would appretiate if you could test 4.5 rc4 ? maybe to observe the wacom behavior and report back? I am far from my machine and if you will get freezes on 4.5rc4 kernel series and freezes continue I would try to push devs harder to fix the driver. --- It's not relevant but heres my output w/o plugged wacom Linux version 4.4.2-1-MANJARO (builduser@manjaro) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Thu Feb 18 00:17:59 UTC 2016 http://pastebin.com/Ca8jisP7 - dmesg http://pastebin.com/h9GUhG9z - lspci -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1548581 Title: using wacom tablet crashes the whole system in 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1548581/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1152484] Re: [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
Hello :) I is realy fixed?? I am on kernel 4.3.0 and my AMD trinity CPU is throthling 100% often I did not manage to notice when this happens, only that computer gets hot. ec 07 16:23:08 NORMANDY kernel: smpboot: CPU 2 is now offline Dec 07 16:23:08 NORMANDY kernel: smpboot: CPU 3 is now offline Dec 07 16:23:08 NORMANDY kernel: ACPI: Low-level resume complete Dec 07 16:23:08 NORMANDY kernel: ACPI : EC: EC started Dec 07 16:23:08 NORMANDY kernel: PM: Restoring platform NVS memory Dec 07 16:23:08 NORMANDY kernel: Using NULL legacy PIC Dec 07 16:23:08 NORMANDY kernel: LVT offset 0 assigned for vector 0x400 Dec 07 16:23:08 NORMANDY kernel: [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vect Dec 07 16:23:08 NORMANDY kernel: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR0413=0xc100) Dec 07 16:23:08 NORMANDY kernel: [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vect Dec 07 16:23:08 NORMANDY kernel: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC408=0xc100) Dec 07 16:23:08 NORMANDY kernel: Enabling non-boot CPUs ... Dec 07 16:23:08 NORMANDY kernel: x86: Booting SMP configuration: Dec 07 16:23:08 NORMANDY kernel: smpboot: Booting Node 0 Processor 1 APIC 0x11 Dec 07 16:23:08 NORMANDY kernel: [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. Dec 07 16:23:08 NORMANDY kernel: xhci_hcd :00:10.0: port 0 resume PLC timeout ** Attachment added: "firmwarebug.txt" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1152484/+attachment/4531012/+files/firmwarebug.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1152484 Title: [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1152484/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1416189] Re: AMD [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu
*** This bug is a duplicate of bug 1152484 *** https://bugs.launchpad.net/bugs/1152484 Hi, I am using Arch linux with kernel 4.2 and the issue is still present. It cause my one core to run 100% load withou any process using it (htop) and draws my battery quickly :( I didn't had an issue with kernel 3.13 AMD A8-4500M APU with Radeon(tm) HD Graphics Log ``` Nov 26 16:30:25 NORMANDY kernel: ACPI: Preparing to enter system sleep state S3 Nov 26 16:30:25 NORMANDY kernel: ACPI : EC: EC stopped Nov 26 16:30:25 NORMANDY kernel: PM: Saving platform NVS memory Nov 26 16:30:25 NORMANDY kernel: Disabling non-boot CPUs ... Nov 26 16:30:25 NORMANDY kernel: smpboot: CPU 1 is now offline Nov 26 16:30:25 NORMANDY kernel: smpboot: CPU 2 is now offline Nov 26 16:30:25 NORMANDY kernel: smpboot: CPU 3 is now offline Nov 26 16:30:25 NORMANDY kernel: ACPI: Low-level resume complete Nov 26 16:30:25 NORMANDY kernel: ACPI : EC: EC started Nov 26 16:30:25 NORMANDY kernel: PM: Restoring platform NVS memory Nov 26 16:30:25 NORMANDY kernel: Using NULL legacy PIC Nov 26 16:30:25 NORMANDY kernel: LVT offset 0 assigned for vector 0x400 Nov 26 16:30:25 NORMANDY kernel: [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vect Nov 26 16:30:25 NORMANDY kernel: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 0 (MSR0413=0xc100) Nov 26 16:30:25 NORMANDY kernel: [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vect Nov 26 16:30:25 NORMANDY kernel: [Firmware Bug]: cpu 0, failed to setup threshold interrupt for bank 4, block 1 (MSRC408=0xc100) Nov 26 16:30:25 NORMANDY kernel: Enabling non-boot CPUs ... Nov 26 16:30:25 NORMANDY kernel: x86: Booting SMP configuration: Nov 26 16:30:25 NORMANDY kernel: smpboot: Booting Node 0 Processor 1 APIC 0x11 Nov 26 16:30:25 NORMANDY kernel: [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. Nov 26 16:30:25 NORMANDY kernel: cache: parent cpu1 should not be sleeping Nov 26 16:30:25 NORMANDY kernel: CPU1 is up Nov 26 16:30:25 NORMANDY kernel: smpboot: Booting Node 0 Processor 2 APIC 0x12 Nov 26 16:30:25 NORMANDY kernel: [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. Nov 26 16:30:25 NORMANDY kernel: cache: parent cpu2 should not be sleeping Nov 26 16:30:26 NORMANDY kernel: CPU2 is up Nov 26 16:30:26 NORMANDY kernel: smpboot: Booting Node 0 Processor 3 APIC 0x13 Nov 26 16:30:26 NORMANDY kernel: [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. Nov 26 16:30:26 NORMANDY kernel: cache: parent cpu3 should not be sleeping Nov 26 16:30:26 NORMANDY kernel: CPU3 is up Nov 26 16:30:26 NORMANDY kernel: ACPI: Waking up from system sleep state S3 Nov 26 16:30:26 NORMANDY kernel: ohci-pci :00:12.0: System wakeup disabled by ACPI Nov 26 16:30:26 NORMANDY kernel: ohci-pci :00:13.0: System wakeup disabled by ACPI Nov 26 16:30:26 NORMANDY kernel: xhci_hcd :00:10.0: System wakeup disabled by ACPI Nov 26 16:30:26 NORMANDY kernel: xhci_hcd :00:10.1: System wakeup disabled by ACPI Nov 26 16:30:26 NORMANDY kernel: PM: noirq resume of devices complete after 14.220 msecs Nov 26 16:30:26 NORMANDY kernel: PM: early resume of devices complete after 0.393 msecs Nov 26 16:30:26 NORMANDY kernel: sd 0:0:0:0: [sda] Starting disk Nov 26 16:30:26 NORMANDY kernel: rtc_cmos 00:01: System wakeup disabled by ACPI ``` -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1416189 Title: AMD [Firmware Bug]: cpu 0, try to use APIC500 (LVT offset 0) for vector 0xf9, but the register is already in use for vector 0x400 on another cpu To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1416189/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1471238] Re: BCM43142 will stop working when signal is below 55%
Further update, The issue remains, I didn't notice it because in Arch linux the driver had better performance and from my AP distance I was kinda OK, however when I have moved for a few metters the signal drops to ~55% and the issue persisted in kernel 4.2. It is driver issue though -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1471238 Title: BCM43142 will stop working when signal is below 55% To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1471238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1471238] Re: BCM43142 will stop working when signal is below 55%
Update: I switch from ubuntu to Manjaro, using kernel 4.2.2 Huray I am not doomed to be using older kernel such as 3.13 forever. Here are some additional information aboud neworking card $ lspci -k 02:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01) Subsystem: Lenovo Device 0611 Kernel driver in use: wl Kernel modules: bcma, wl 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) Subsystem: Lenovo Device 5100 Kernel driver in use: rtsx_pci Kernel modules: rtsx_pci and the driver https://bbs.archlinux.org/viewtopic.php?id=145884 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1471238 Title: BCM43142 will stop working when signal is below 55% To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1471238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1471238] Re: BCM43142 will stop working when signal is below 55%
I forgot to add, IT WORKS :)) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1471238 Title: BCM43142 will stop working when signal is below 55% To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1471238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1471238] [NEW] BCM43142 will stop working when signal is below 55%
Public bug reported: Lenovo ThinkPad E545 Network controller : Broadcom Corporation BCM43142 802.11b/g/n (rev 01) If you are using this WIFI card, beware that *bcmwf-kernel-source* does perform very badly with a newer version of the *bcmwf-kernel-source* 6.30.223.248-bdcom-0ubuntuXX (XX I have tried them all and all are not working) Desripction of what is happening: You are connnected to a network (does not matter on the router config or router) and when you are at signal level cca 55% and less the internet drops and you are offline (still connected but no packets get in or out) for a long period of time (restarting card works for a few moments when the drop occurs again) --- *bcmwf-kernel-source* 6.30.223.141 works as it should, but I am stuck in kernel 3.13 as I want to go kernel 3.19 and I can't because I have to use newer bcmwf and it is unstable, very much. --- $ lsb_release -rd Description:Linux Mint 17.1 Rebecca Release:17.1 ** Affects: bcmwl (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1471238 Title: BCM43142 will stop working when signal is below 55% To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1471238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 121356] Re: options usbhid mousepoll=x ignored
Hello, I hope I'm not causing any annoyance but I am desperate to change my mousepoll rate in linux mint 17.1 And I have tried alot of solution, none of them worked. I have in # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with # are ignored. # Parameters can be specified after the module name. lp rtc -r usbhid usbhid mousepoll=2 and I have created file # /etc/modprobe.d/options options usbhid mousepoll=2 Then I have ran sudo update-initramfs -k all -u rebooted and with no luck, I am still at 125mhz (my mouse is 1000mhz capable, I had 1000mhz when running Feisty) I would like to mention that sudo rmmod usbhid sudo modprobe usbhid mousepoll=2 wont change the polling rate to 500Hz -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/121356 Title: options usbhid mousepoll=x ignored To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/121356/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 517021] Re: gvfsd-metadata causes 100% CPU usage
The Bug 637095 is no longer available, where should we find a patch? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/517021 Title: gvfsd-metadata causes 100% CPU usage To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/517021/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 517021] Re: gvfsd-metadata causes 100% CPU usage
Finally I discovered, why my HDD makes a clicking noise, it was gvfs stuck in a loop (I am also using Super Start). Now I know why my live mint17.1 killed my flash drive. :( Thanks again and raise awarnes. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/517021 Title: gvfsd-metadata causes 100% CPU usage To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/517021/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1317108] Re: dead keys not play randomly, tildes no funcionan aleatoriamente
I can confirm this. Using Linux mint 17.1 and after starting TexMaker I am not able to type ó it results always as ´o . If I switch windows back and forth I am able to type ó, but after moving my text cursor with arrows the keyboard gets screwed again. This is serious f*ck up. HAS to be fixed, it affects other qt5 apps -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1317108 Title: dead keys not play randomly, tildes no funcionan aleatoriamente To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openbox/+bug/1317108/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs