[Bug 1714659] Re: HPLIP is not compatible with modern GNOME (No system tray detected on this system. Unable to start, exiting.)
In the above post, I was in error about hplip causing the high CPU usage. I have changed my Desktop management from Gnome to Unity. The hp systray icon is back on the panel. I apologize for the CPU usage mistake. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1714659 Title: HPLIP is not compatible with modern GNOME (No system tray detected on this system. Unable to start, exiting.) To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1714659/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1714659] Re: HPLIP is not compatible with modern GNOME (No system tray detected on this system. Unable to start, exiting.)
I think that is error is now causing very high CPU usage. Typically my CPU load averages are under 1. They usually range like thus: .5 to .8 for all time frames (1 min, 5 min, 15 min). Currently my avgs. are 3.00 to 4.00. These high loads started after HPLIP's "No systray" on daily power up. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1714659 Title: HPLIP is not compatible with modern GNOME (No system tray detected on this system. Unable to start, exiting.) To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1714659/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1773959] Re: High CPU usage by gnome-shell when only running gnome-terminal
I disabled all extensions in Firefox. I'm trying to fix my high CPU. I'm not a computer adept. mark@Lexington:~$ ps aux | grep 'Z' USER PID %CPU %MEMVSZ RSS TTY STAT START TIME COMMAND root 2587 0.0 0.0 0 0 ?Z08:05 0:00 [apccontrol] mark 2608 0.0 0.0 0 0 tty2 Z+ 08:05 0:00 [livepatch-notif] mark 19191 0.0 0.0 0 0 tty2 Z+ 16:38 0:00 [livepatch-notif] mark@Lexington:~$ pstree -p -s 2608 systemd(1)───gdm3(1052)───gdm-session-wor(2026)───gdm-x-session(2053)───gnome-s+ mark@Lexington:~$ pstree -p -s 19191 systemd(1)───gdm3(1052)───gdm-session-wor(2026)───gdm-x-session(2053)───gnome-session-b(2065)───update-notifier(2599)───livepatch-not+ Before installing 18.04 my CPU load averages ranged from .5 to 1-ish. Now they are always over 2. That's not a heat issues, obvs, but it is making for erratic mouse/screen appearances. mark@Lexington:~$ canonical-livepatch status --verbose client-version: 8.1.0 machine-id: 6ac6b179c17c458d850424626c8b8c04 machine-token: be21448785bf432db941d268ec4e9032 architecture: x86_64 cpu-model: AMD FX(tm)-6300 Six-Core Processor last-check: 2019-01-04T17:08:29.620560634-08:00 boot-time: 2019-01-04T08:03:53-08:00 uptime: 9h5m24s status: - kernel: 4.15.0-43.46-generic running: true livepatch: checkState: checked patchState: nothing-to-apply version: "" fixes: "" Sources: http://ubuntu.5.x6.nabble.com/On-restart-Livepatch-Notif-is-always-a -zombie-process-td5176526.html -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1773959 Title: High CPU usage by gnome-shell when only running gnome-terminal To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1773959/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1804285] [NEW] hplip Setting up python3 Errno2
Public bug reported: This is Ubuntu 18.04.1 LTS (bionic beaver) mark@Lexington:~$ apt-cache policy hplip hplip: Installed: 3.17.10+repack0-5 Candidate: 3.17.10+repack0-5 Version table: *** 3.17.10+repack0-5 500 500 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 Packages 100 /var/lib/dpkg/status The extensive terminal output, posted below, can also be viewed here: https://pastebin.com/Zrv5AAZL After I could not repair the hplip causing the printer/scanner dialogue windows to take 5 minutes to come onscreen, I reinstalled Ubuntu 18.04. After running all updates on the OS, I reinstalled hplip (or so I thought). The hplip did install, the dialogue windows come onscreen almost instantly. There is no HP icon in the system tray and hplip throws an error/warning about this with each reboot. Today, I tried running: sudo apt-get update / upgrade. I was offered a list of upgradeable packages and said Yes to the upgrade. After running the terminal threw a long list of error messages all or almost all related to the hplip, specifically mutter, python3. Python repeatedly reports Errno2. What appeared in the terminal follows: mark@Lexington:~$ sudo aptitude upgrade The following packages will be upgraded: bind9-host dnsutils gir1.2-mutter-2 gnome-shell gnome-shell-common google-chrome-stable libbind9-160 libdns-export1100 libdns1100 libirs160 libisc-export169 libisc169 libisccc160 libisccfg160 liblwres160 libmutter-2-0 libpython3-stdlib mutter mutter-common python3 python3-distutils python3-gdbm python3-lib2to3 python3-minimal 24 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 60.9 MB of archives. After unpacking 128 kB will be used. Do you want to continue? [Y/n/?] Y Get: 1 http://dl.google.com/linux/chrome/deb stable/main amd64 google-chrome-stable amd64 70.0.3538.110-1 [55.9 MB] Get: 2 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-minimal amd64 3.6.7-1~18.04 [23.7 kB] Get: 3 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3 amd64 3.6.7-1~18.04 [47.2 kB] Get: 4 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libpython3-stdlib amd64 3.6.7-1~18.04 [7,240 B] Get: 5 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libisc-export169 amd64 1:9.11.3+dfsg-1ubuntu1.3 [163 kB] Get: 6 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libdns-export1100 amd64 1:9.11.3+dfsg-1ubuntu1.3 [749 kB] Get: 7 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 dnsutils amd64 1:9.11.3+dfsg-1ubuntu1.3 [145 kB] Get: 8 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 bind9-host amd64 1:9.11.3+dfsg-1ubuntu1.3 [53.5 kB] Get: 9 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libbind9-160 amd64 1:9.11.3+dfsg-1ubuntu1.3 [27.6 kB] Get: 10 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libisccfg160 amd64 1:9.11.3+dfsg-1ubuntu1.3 [48.4 kB] Get: 11 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libisccc160 amd64 1:9.11.3+dfsg-1ubuntu1.3 [17.9 kB] Get: 12 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libirs160 amd64 1:9.11.3+dfsg-1ubuntu1.3 [19.1 kB] Get: 13 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libdns1100 amd64 1:9.11.3+dfsg-1ubuntu1.3 [966 kB] Get: 14 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libisc169 amd64 1:9.11.3+dfsg-1ubuntu1.3 [237 kB] Get: 15 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 liblwres160 amd64 1:9.11.3+dfsg-1ubuntu1.3 [34.6 kB] Get: 16 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-gdbm amd64 3.6.7-1~18.04 [13.4 kB] Get: 17 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 mutter-common all 3.28.3-2~ubuntu18.04.2 [13.3 kB] Get: 18 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gir1.2-mutter-2 amd64 3.28.3-2~ubuntu18.04.2 [139 kB] Get: 19 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libmutter-2-0 amd64 3.28.3-2~ubuntu18.04.2 [1,207 kB] Get: 20 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gnome-shell amd64 3.28.3-0ubuntu0.18.04.3 [665 kB] Get: 21 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 gnome-shell-common all 3.28.3-0ubuntu0.18.04.3 [183 kB] Get: 22 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 mutter amd64 3.28.3-2~ubuntu18.04.2 [15.4 kB] Get: 23 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-lib2to3 all 3.6.7-1~18.04 [76.5 kB] Get: 24 http://us.archive.ubuntu.com/ubuntu bionic-updates/main amd64 python3-distutils all 3.6.7-1~18.04 [141 kB] Fetched 60.9 MB in 16s (3,874 kB/s) (Reading database ... 201838 files and directories currently installed.) Preparing to unpack .../python3-minimal_3.6.7-1~18.04_amd64.deb ... Unpacking python3-minimal (3.6.7-1~18.04)
[Bug 1648863] Re: Chrome sync password change doesn't synchronise with key ring
You should repost all this at Google's Groups. All I could quickly find is: https://support.google.com/accounts/answer/185834?hl=en and https://groups.google.com/forum/#!overview -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1648863 Title: Chrome sync password change doesn't synchronise with key ring To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1648863/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1786528] [NEW] Drag and drop fails.
Public bug reported: Description:Ubuntu 18.04.1 LTS Release:18.04 mark@Lexington:~$ apt-cache policy pinta pinta: Installed: 1.6-2 Candidate: 1.6-2 Version table: *** 1.6-2 500 500 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages 500 http://us.archive.ubuntu.com/ubuntu bionic/universe i386 Packages 100 /var/lib/dpkg/status I tried to open a .jpg by dragging the file from the file manager into the Pinta window. Pinta fails, asks for this bug to be reported and here it is: Unhandled exception. Exception has been thrown by the target of an invocation. ** Affects: pinta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1786528 Title: Drag and drop fails. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pinta/+bug/1786528/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1447267] Re: Ubuntu 14.04 AMD64 MSI 970 Gaming USB3.0 does not work
The "iommu=soft" workaround does NOT solve this issue for me. Mine is CPU AMD FX-6300. USB 2.0 ports working. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1447267 Title: Ubuntu 14.04 AMD64 MSI 970 Gaming USB3.0 does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/external-storage-manager/+bug/1447267/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1548947] Re: Canon printer/scanner driver fails
Not only is /var/tmp the directory for that the Canon created "dirvers" fills with the cnij files, I now see folders named, in part, "systemd- private-" (The quotation marks are mine, they don't appear in the ls of /var/tmp.) I had posted to the Canon Printer Forum about this and had no response as to whether I could "sudo rm -r systemd-private*" I went ahead and removed them and have seen no ill effects from printing, faxing, scanning or copying documents, other than the Canon created software adding directories and files unnecessarily. You can see the post at the Canon forum at: http://community.usa.canon.com/t5/Office-Printers/Canon-drivers-for- Linux-not-deleting-Private-Tmp-folders-for/m-p/175472#U175472 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1548947 Title: Canon printer/scanner driver fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1548947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1373639] Re: atop crashed with SIGFPE in acctprocnt()
First occurrence of this "atop crashed with SIGFPE" on my Xenial Xerus is 23Jun16. OS ran without this flaw until that date. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1373639 Title: atop crashed with SIGFPE in acctprocnt() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/atop/+bug/1373639/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589015] Re: Printer bug adds cnij* into /var/tmp endlessly
Dear Sirs: After some more research I have posted to the Canon Printer forum about this. As they are the source of the drivers for their products, it is better if they do this work. To be thorough about this, I am appending these links. https://bbs.archlinux.org/viewtopic.php?id=150151 https://bbs.archlinux.org/viewtopic.php?id=150052 https://askubuntu.com/questions/627594/can-i-delete-older-systemd- private-md32-files-in-var-tmp https://askubuntu.com/questions/781508/systemd-adding-lines-continuosly -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589015 Title: Printer bug adds cnij* into /var/tmp endlessly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cjet/+bug/1589015/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1589015] [NEW] Printer bug adds code into /var/tmp endlessly
Public bug reported: Canon Maxify MB2320 printer (all-in-one) causes or systemd causes lines to be added to /var/tmp/ continuously. By constant, I mean whenever the printer, or scanner, or copier function. I reported a bug at the Canon Printer Community Forum for it's writing massively large files (starting cnij) and filling /var/tmp to the point where / was complaining of no space remaining. As these two problems may be linked I'm posting a little about the cnij files, too. Please bear with me. http://community.usa.canon.com/t5/Office-Printers/Maxify-MB2320-and- driver/td-p/165313 The next problem occurs after I start a weekly removal of those cnij files. When the device (printer) was first installed there were but 3 or 4 files in /var/tmp, no including the cnij-s. That has now grown to 70+ lines. I append a few here, as they are somewhat similar. If you wish to see all 70, they are at https://paste.ubuntu.com/16968056/ Representative sample: mark@Lexington:/var/tmp$ ls canon_sgmp2_setting.ini kdecache-mark mkinitramfs-FW_mgeshg systemd-private-273505a4cf664ff0af6e81870ea6665a-colord.service-hk7T18 systemd-private-273505a4cf664ff0af6e81870ea6665a-rtkit-daemon.service-Lv8yQF systemd-private-273505a4cf664ff0af6e81870ea6665a-systemd-timesyncd.service-Fizgv4 systemd-private-29b03f52b21d493abf1e8ea22b6b7adc-colord.service-WLN1p1 systemd-private-29b03f52b21d493abf1e8ea22b6b7adc-rtkit-daemon.service-ghG257 systemd-private-29b03f52b21d493abf1e8ea22b6b7adc-systemd-timesyncd.service-BuNOet While trying to run Ubuntu's (badly named app) "Backup", I received the following error message: Backup Failed Giving up after 5 attempts. Error: g-io-error-quark: Error opening file: '/media/mark/80cb5313-35a0-432b-9250-4cc62d79a3c8/duplicity- inc.20160528T201042Z.to.20160603T203335Z.vol2.diff tar.gpg': Read-only file system (21) I have asked for help at AskUbuntu and the Ubuntu Forums. At AskU I was directed to report the bug here. Following the Launchpad reporting guidelines: Description:Ubuntu 16.04 LTS Release:16.04 mark@Lexington:/var/tmp$ apt-cache policy backups N: Unable to locate package backups I expected the backup to run as it has for years and years. Backup reports fail message. I am not aware of whether this is a security bug. I have left that box unchecked. There has been no response at Ubuntu Forums as yet. If there is one I will add the relevant information as it becomes available. ** Affects: systemd (Ubuntu) Importance: Undecided Status: New ** Tags: colord systemd -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1589015 Title: Printer bug adds code into /var/tmp endlessly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1589015/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1553788] Re: package ca-certificates 20160104ubuntu1 failed to install/upgrade: triggers looping, abandoned
This happened while upgrading from 14.04 to 15.10 and then to 16.04 -- all on the same day of upgrades. Thank you. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1553788 Title: package ca-certificates 20160104ubuntu1 failed to install/upgrade: triggers looping, abandoned To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ca-certificates/+bug/1553788/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1548947] [NEW] Canon printer/scanner driver fails
Public bug reported: This is about issues with Canon's Maxify MB2320 drivers for the printer and scanner. Something puts a large number of files in /var/tmp, whenever the printer or scanner functions are used. These files all start with cnij. The scanner driver is not Sane compliant. To scan the Canon app must be called from a terminal with: scangearmp2 running that produces: "(scangearmp2:11008): GLib-CRITICAL **: Source ID 1019 was not found when attempting to remove it" I have posted about this at the Canon community forum and this forum today (23 Feb 16). Per Launchpad requirements: mark@Lexington:/var/tmp$ lsb_release -rd Description:Ubuntu 14.04.4 LTS Release:14.04 mark@Lexington:/var/tmp$ apt-cache policy scangearmp2 scangearmp2: Installed: 3.00-1 Candidate: 3.00-1 Version table: *** 3.00-1 0 100 /var/lib/dpkg/status I have asked the Canon forum to better work with Linux developers towards writing Linux compatible software. I expected the Canon to be Linux compliant, not to have Canon try to make Linux comply with Canon. These cnij* objects in /var/tmp became so numerous (305) that I received a " / is full" message. That required posts at UbuntuForum.com to resolve that problem. The 305 cnij* created 1.7gig of file space in /var/tmp. This problem must be temporarily resolved by: cd /var/tmp and then sudo rm cnij*. Then ls to see that the cnij-s* are gone. ** Affects: gnome-control-center (Ubuntu) Importance: Undecided Status: New ** Tags: canon cnij maxify mb2320 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1548947 Title: Canon printer/scanner driver fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1548947/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 699802] Re: error:: no video mode activated
This flaw (or bug) has caused 2 different problems. It has prevented the desktop (/home/mark/Desktop) from being stable. At boot time (cold or warm) the objects on the /Desktop load, but after a few seconds vanish. The file manager behaves much the same way. When called or invoked the Folder icon on my left panel opens for a few seconds, then closes without being commanded to do so. At no time during the on-time for the computer can the file manager (Nautilus?) operate properly. Also, trying to fix this and being mislead by those with Unity or Compiz problem, I have reset my left panel and lost a number of application. A few days later, I saw, at boot time, one icon which had the look or image of the i'm still loading the exact moment went by so swiftly I don't know for certain what it is. But, I decided to delete it. It had a filename extension of .jp2. Ubuntu's various apps cannot read a .jp2. After deleting this file and re-booting, I have the formerly lost desktop objects returned to their places on the /Desktop. For example. *.txt, .jpg, .pdf, user created directories Trusty Tahr, desktop configuration file (application/x-desktop), .mp3 and such. And the file manager is working. Some of the processes I did are here: http://paste.ubuntu.com/7295230/ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/699802 Title: error:: no video mode activated To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/699802/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1187788] Re: package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 126
*** This bug is a duplicate of bug 988509 *** https://bugs.launchpad.net/bugs/988509 I may be in error, but as This bug report is a duplicate of: Bug #988509: setoption.pl is not executable. says that the bug has been fixed and as I am having the same problem, I submit the bug is NOT fully resolved. I could not even say this bug affects me at Bug #988509 and had to resort to this so-called duplicate bug. thanks. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1187788 Title: package samba4 4.0.0~alpha18.dfsg1-4ubuntu2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 126 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/samba4/+bug/1187788/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1043969] Re: gourmet recipe manager crashes loading nutritional data
I have the same problem: mark@Lexington:~$ gourmet sqlite:home/mark/.gourmet/recipes.db RECREATE USDA WEIGHTS TABLE Attempting to alter usda_weights bound method NutritionDataPlugin.setup_usda_weights_table of nutritional_information.data_plugin.NutritionDataPlugin instance at 0x9259bcc {} ['ndbno', 'seq', 'amount', 'unit', 'gramwt', 'ndata', 'stdev'] Traceback (most recent call last): File /usr/share/gourmet/gourmet/backends/db.py, line 931, in alter_table self.db.execute('ALTER TABLE %(t)s RENAME TO %(t)s_temp'%{'t':table_name}) File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py, line 2297, in execute return connection.execute(statement, *multiparams, **params) File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py, line 1405, in execute params) File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py, line 1582, in _execute_text statement, parameters File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py, line 1646, in _execute_context context) File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/base.py, line 1639, in _execute_context context) File /usr/lib/python2.7/dist-packages/sqlalchemy/engine/default.py, line 330, in do_execute cursor.execute(statement, parameters) OperationalError: (OperationalError) there is already another table or index with this name: usda_weights_temp 'ALTER TABLE usda_weights RENAME TO usda_weights_temp' () Problem updating plugin nutritional_information.data_plugin.NutritionDataPlugin instance at 0x9259bcc nutritondata Traceback (most recent call last): File /usr/bin/gourmet, line 35, in module gourmet.GourmetRecipeManager.startGUI() File /usr/share/gourmet/gourmet/GourmetRecipeManager.py, line 715, in startGUI r=RecGui(splash_label=splash.label) File /usr/share/gourmet/gourmet/GourmetRecipeManager.py, line 918, in __init__ GourmetApplication.__init__(self, splash_label=splash_label) File /usr/share/gourmet/gourmet/GourmetRecipeManager.py, line 114, in __init__ self.setup_recipes() # Setup recipe database File /usr/share/gourmet/gourmet/GourmetRecipeManager.py, line 204, in setup_recipes self.rd = recipeManager.default_rec_manager() File /usr/share/gourmet/gourmet/recipeManager.py, line 131, in default_rec_manager return get_recipe_manager(**dbargs) File /usr/share/gourmet/gourmet/recipeManager.py, line 126, in get_recipe_manager return RecipeManager(**args) File /usr/share/gourmet/gourmet/backends/db.py, line 1769, in __init__ RecData.__init__(self,*args,**kwargs) File /usr/share/gourmet/gourmet/backends/db.py, line 165, in __init__ self.update_version_info(gourmet.version.version) File /usr/share/gourmet/gourmet/backends/db.py, line 598, in update_version_info (current_super,current_major,current_minor) File /usr/share/gourmet/gourmet/backends/db.py, line 640, in update_plugin_version plugin_current = plugin.version, File /usr/share/gourmet/gourmet/plugins/nutritional_information/data_plugin.py, line 68, in update_version [name for lname,name,typ in parser_data.WEIGHT_FIELDS]) File /usr/share/gourmet/gourmet/backends/db.py, line 944, in alter_table del self.metadata.tables[table_name] File /usr/lib/python2.7/dist-packages/sqlalchemy/util/_collections.py, line 38, in _immutable raise TypeError(%s object is immutable % self.__class__.__name__) TypeError: immutabledict object is immutable mark@Lexington:~$ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1043969 Title: gourmet recipe manager crashes loading nutritional data To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gourmet/+bug/1043969/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1088185] Re: kernel hangs on boot with btrfs
There is no more information than what I can add here. I installed Ubuntu ver. 12.04LTS (Precise Pangolin) about a week ago (1-August-2013). I used the BTRFS file system. On first re-boot after installation, I was offered 3 choices: (S)kip -- (I)gnore -- (M)ount Manually. Selecting skip hung the boot and the OS never loaded. Selecting the IGNORE for both / and /home (those word or characters do appear on-screen) loads the OS and I have a working computer. Since this problem is at boot time, I believe that the Launchpad Reporting tool- mechanism isn't able to report as it's not loaded. I am in the habit of closing all the open files, directory folders and applications (e.g., Firefox), before I issue the shutdown command. When the shutdown is issued, the OS seems to unwind itself very quickly - a few seconds only - but the power does not shut down. I have to press the power button a few seconds and the computer is then turned off. I have been doing this about 8 days or so and have not seen another problem. I backup daily. If you have questions post them to me. I can try to find the kernel.log or whatever, but I don't know where to look or how much to post without your help. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1088185 Title: kernel hangs on boot with btrfs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1088185/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 940554] Re: chromium-browser crashed with SIGABRT in raise()
This is Xubuntu 12.04. After an Update Manager update of Chrome/Chromium, browser no longer operational. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/940554 Title: chromium-browser crashed with SIGABRT in raise() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/940554/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 926964] Re: chromium-browser crashed with SIGABRT in TCMalloc_CRASH_internal()
This is Xubuntu 12.04 LTS. This is a clean install of Xubuntu in June 2013. After package update from Update Mgr., Chrome and Chromium fail to launch. chromium-browser 28.0.1500.71-0ubuntu1.12.04.1 google-chrome-stable 28.0.1500.71-r209842 neither run. I tried an advice to mv pepperflash but that did not work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/926964 Title: chromium-browser crashed with SIGABRT in TCMalloc_CRASH_internal() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/926964/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 256767] Re: USB devices work, but constant syslog errors unable to enumerate USB device on port 5
The kern.log has this line: Jul 24 10:41:38 Lexington kernel: [ 6100.207979] hub 1-7:1.0: unable to enumerate USB device on port 3 repeat without stopping while the computer is powered up. The time changes but the message repeats over and over. mark@Lexington:~$ uname -r 3.8.0-26-generic however this is Xubuntu. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/256767 Title: USB devices work, but constant syslog errors unable to enumerate USB device on port 5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/256767/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 744326] Re: import webpage window dont close automatically
This has been this way for some while now. I click Close and it goes away. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/744326 Title: import webpage window dont close automatically To manage notifications about this bug go to: https://bugs.launchpad.net/gourmet/+bug/744326/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1057275] Re: xfce4-appfinder crashed with SIGSEGV in g_type_check_instance_cast()
*** This bug is a duplicate of bug 1016671 *** https://bugs.launchpad.net/bugs/1016671 After downloading, installing and rebooting new kernel and other updates yesterday: 3.2.0-39-generic-pae on power up (cold boot) time today, I received this xfce4-appfinder error. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1057275 Title: xfce4-appfinder crashed with SIGSEGV in g_type_check_instance_cast() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-appfinder/+bug/1057275/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1101395] Re: mythlogserver crashed with SIGSEGV in QObject::disconnect()
Today, I turned the 'puter on. A few moments after the desktop finished loading, I noticed both tuner lights on my SiliconDust tuner are active. No reason for that no scheduled work for Myth. I sudo the backend to stop and noticed a significant drop in CPU usage. And the tuner LEDs are out. Per Mr. Mashos request re: top cpu from a few days ago. With no other software app running, other than the terminal, so that I might observe the TOP results, stopping the backend restored some sanity to the OS. Part of Apache2 was mis-configged and aptitude figured that out and re- installed it, so that's at an 'end' for now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1101395 Title: mythlogserver crashed with SIGSEGV in QObject::disconnect() To manage notifications about this bug go to: https://bugs.launchpad.net/mythbuntu/+bug/1101395/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1016671] Re: xfce4-appfinder crashed with SIGSEGV in g_type_check_instance_cast()
Powered up computer. First thing that happened after entering my password and watching XFCE desktop come on-screen is the error message: Sorry, Ununtu 12.04 has experienced an internal error. If you notice further problems, try restarting the computer. I then click Continue to send a report. I have done this now nearly a dozen times. I'm not complaining. I'm only confused. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1016671 Title: xfce4-appfinder crashed with SIGSEGV in g_type_check_instance_cast() To manage notifications about this bug go to: https://bugs.launchpad.net/xfce4-appfinder/+bug/1016671/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1101395] Re: mythlogserver crashed with SIGSEGV in QObject::disconnect()
After running sudo service mythtv-backend stop, the OS cannot get back control. My mouse is weak to dead at times. Typing into a form took 10 minutes because of this. What part of mythtv can I stop besides backend? I tried to stop mythlogserver, mythlcdserver and another myth, but the terminal said unrecognized service. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1101395 Title: mythlogserver crashed with SIGSEGV in QObject::disconnect() To manage notifications about this bug go to: https://bugs.launchpad.net/mythbuntu/+bug/1101395/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1101395] Re: mythlogserver crashed with SIGSEGV in QObject::disconnect()
Without MythTV's frontend running, the Launchpad Bug reporter came up on screen today. I had to twice enter my Linux Admin password, and then and only then would this bug be reported. While this bug has been triaged as being of medium importance, I suggest it is worse (higher importance). Ever since MythTV has become part of my auto-downloads through the Ubuntu Update Manager, my hard drive spins furiously and the CPU had insane load averages of 15 : 12 : 8. I have a quad core cpu. This conflict even causes the mouse cursor to disappear from the screen and no amount of mouse movement finds it. What is even more confusing is that I am taken to a Launchpad page to select from several bugs and I have NO WAY of knowing which to select. So, even though I'm in ignorance, I have selected this one. By the bye: the Launchpad bug report took several minutes to populate it's report and send it along here. As my upload speed is 76K, that's a lot of upload. In the megabytes. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1101395 Title: mythlogserver crashed with SIGSEGV in QObject::disconnect() To manage notifications about this bug go to: https://bugs.launchpad.net/mythbuntu/+bug/1101395/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719443] Re: Search and categories do not work
I too confirm that the search function does not work. I find the Browse function is working. These problems (of some non-functionality) seem to happen with each release of a new Ubuntu. I currently use: Precise Pangolin v. 12.04. In the past, I corrected some of the problems installing or updating Poplar (this statement about Poplar is from my memory is over 2 years ago). I looked at the list of dependencies, tried to see the first one: coreutils 8.5-1ubuntu3 and at the terminal Aptitude said: mark@Lexington-19:~$ sudo aptitude install coreutils 8.5-1ubuntu3 [sudo] password for mark: Couldn't find any package whose name or description matched 8.5-1ubuntu3 Couldn't find any package whose name or description matched 8.5-1ubuntu3 No packages will be installed, upgraded, or removed. So, while I was going to go through that list, one object at a time, I will now wait for superior minds to fix this. Thank you for your time reading my thoughts. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719443 Title: Search and categories do not work To manage notifications about this bug go to: https://bugs.launchpad.net/grecipe-manager/+bug/719443/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 685063] [NEW] package plymouth 0.8.2-2ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: plymouth I put 11.04 on an 8 gig thumb drive. On first run, the terminal reported a problem. I copied the terminal output which follows: Setting up libplymouth2 (0.8.2-2ubuntu7) ... Setting up plymouth (0.8.2-2ubuntu7) ... Installing new version of config file /etc/init/plymouth.conf ... Installing new version of config file /etc/init/plymouth-stop.conf ... update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing plymouth (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of plymouth-label: plymouth-label depends on plymouth (= 0.8.2-2ubuntu7); however: Package plymouth is not configured yet. dpkg: error processing plymouth-label (--configure): dependency problems - leaving unconfigured Setting up groff-base (1.20.1-10build1) ... No apport report written because the error message indicates its a followup error from a previous failure. Setting up info (4.13a.dfsg.1-6ubuntu2) ... Setting up iso-codes (3.23-1) ... Setting up libgpg-error0 (1.10-0ubuntu1) ... Setting up libkrb5support0 (1.8.3+dfsg-3) ... Setting up libk5crypto3 (1.8.3+dfsg-3) ... Setting up libkrb5-3 (1.8.3+dfsg-3) ... Setting up libgssapi-krb5-2 (1.8.3+dfsg-3) ... Setting up nano (2.2.6-1) ... dpkg: dependency problems prevent configuration of plymouth-theme-ubuntu-text: plymouth-theme-ubuntu-text depends on plymouth; however: Package plymouth is not configured yet. dpkg: error processing plymouth-theme-ubuntu-text (--configure): dependency problems - leaving unconfigured Setting up w3m (0.5.2-10ubuntu1) ... No apport report written because the error message indicates its a followup error from a previous failure. Setting up acpid (1:2.0.7-1ubuntu1) ... acpid start/running, process 18804 Setting up gnome-games-common (1:2.32.1-0ubuntu2) ... Setting up aisleriot (1:2.32.1-0ubuntu2) ... Setting up app-install-data (0.11.04.1) ... Setting up gdb (7.2-1ubuntu4) ... Setting up genisoimage (9:1.1.11-1ubuntu2) ... Setting up libgtk3.0-common (2.91.5-0ubuntu2) ... Setting up libgtk3.0-0 (2.91.5-0ubuntu2) ... Setting up gir1.0-gtk-3.0 (2.91.5-0ubuntu2) ... Setting up gnome-mahjongg (1:2.32.1-0ubuntu2) ... Setting up gnome-sudoku (1:2.32.1-0ubuntu2) ... Setting up gnomine (1:2.32.1-0ubuntu2) ... Setting up libcdio10 (0.81-4build1) ... Setting up libcdio-cdda0 (0.81-4build1) ... Setting up libcdio-paranoia0 (0.81-4build1) ... Setting up libcouchdb-glib-1.0-2 (0.7.0-0ubuntu2) ... Setting up libdesktopcouch-glib-1.0-2 (0.7.0-0ubuntu2) ... Setting up libgdata-common (0.7.0-0ubuntu1) ... Setting up libgmime-2.4-2 (2.4.14-1+nmu1build1) ... Setting up libgmime2.4-cil (2.4.14-1+nmu1build1) ... * Installing 1 assembly from libgmime2.4-cil into Mono Setting up libplist1 (1.3-2ubuntu1) ... Setting up libimobiledevice1 (1.0.4-1build1) ... Setting up libgpod4 (0.7.95-1build1) ... Setting up libgpod-common (0.7.95-1build1) ... Setting up libgtk3.0-bin (2.91.5-0ubuntu2) ... Setting up libgupnp-igd-1.0-3 (0.1.7-2build1) ... Setting up libieee1284-3 (0.2.11-5ubuntu4) ... Setting up liblcms1 (1.18.dfsg-1ubuntu4) ... Setting up liborbit2 (1:2.14.18-0.1build1) ... Setting up libsndfile1 (1.0.23-1build1) ... Setting up libxslt1.1 (1.1.26-6build1) ... dpkg: dependency problems prevent configuration of plymouth-theme-ubuntu-logo: plymouth-theme-ubuntu-logo depends on plymouth; however: Package plymouth is not configured yet. plymouth-theme-ubuntu-logo depends on plymouth-label; however: Package plymouth-label is not configured yet. dpkg: error processing plymouth-theme-ubuntu-logo (--configure): dependency problems - leaving unconfigured Setting up python-cups (1.9.51-0ubuntu3) ... No apport report written because MaxReports is reached already Setting up python-gtksourceview2 (2.10.1-1build1) ... Setting up python-imaging (1.1.7-2build1) ... Setting up python-notify (0.1.1-2build4) ... Setting up python-pygoocanvas (0.14.1-1ubuntu3) ... Setting up python-pyicu (1.0-1build1) ... Setting up python-rdflib (2.4.2-1build1) ... Setting up python-smbc (1.0.8-0ubuntu2) ... Setting up python-twisted-names (10.1.0-1build1) ... Setting up python-twisted-web (10.1.0-1build1) ... Setting up python-virtkey (0.60.0-0ubuntu3) ... Setting up python-webkit (1.1.8-1build1) ... Setting up python-xapian (1.2.3-3ubuntu1) ... Setting up quadrapassel (1:2.32.1-0ubuntu2) ... Setting up tomboy (1.5.2-1ubuntu4) ... Setting up udisks (1.0.2-1) ... Setting up wodim (9:1.1.11-1ubuntu2) ... Setting up xorg-docs-core (1:1.5.99.901-1ubuntu1) ... Setting up xsltproc (1.1.26-6build1) ... Setting up libbrlapi0.5 (4.2-4ubuntu2) ... Setting up brltty (4.2-4ubuntu2) ... update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory
[Bug 685063] Re: package plymouth 0.8.2-2ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/685063 Title: package plymouth 0.8.2-2ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 685063] Re: package plymouth 0.8.2-2ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Natty Narwahl Alpha 1. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/685063 Title: package plymouth 0.8.2-2ubuntu7 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 573209] [NEW] package wine1.2 1.1.31-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 255
Public bug reported: Binary package hint: wine1.2 This is Ubuntu Linux Karmic Koala - ver. 9.04. Standard install. First I installed wine (sudo aptitude install wine), next wine1.2. Wine install returned dpkg exit status 1. Next, I installed wine 1.2 returned dpkg exit status 255. m...@lexington-19-karmic:~$ apt-cache policy wine1.2 wine1.2: Installed: 1.1.31-0ubuntu3 Candidate: 1.1.31-0ubuntu3 Version table: *** 1.1.31-0ubuntu3 0 500 http://us.archive.ubuntu.com karmic/universe Packages 100 /var/lib/dpkg/status I expected wine/wine1.2 to install without errors. dpkg: error processing wine1.2 (--configure): subprocess installed post-installation script returned error exit status 255 Wine installed with errors. dpkg: error processing wine (--configure): subprocess installed post-installation script returned error exit status 1 Setting up wine-gecko (1.0.0-0ubuntu1) ... Setting up winbind (2:3.4.0-3ubuntu5.6) ... * Starting the Winbind daemon winbind [ OK ] Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: wine E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up wine (1.1.42~winehq0~ubuntu~9.04-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript procps, action start failed. dpkg: error processing wine (--configure): subprocess installed post-installation script returned error exit status 1 ProblemType: Package Architecture: i386 Date: Sat May 1 11:49:03 2010 DistroRelease: Ubuntu 9.10 ErrorMessage: subprocess installed post-installation script returned error exit status 255 InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5) NonfreeKernelModules: nvidia Package: wine1.2 1.1.31-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.31-21.59-generic SourcePackage: wine1.2 Title: package wine1.2 1.1.31-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 255 Uname: Linux 2.6.31-21-generic i686 ** Affects: wine1.2 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 -- package wine1.2 1.1.31-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 255 https://bugs.launchpad.net/bugs/573209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 573209] Re: package wine1.2 1.1.31-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 255
** Attachment added: faulty wine install http://launchpadlibrarian.net/47034957/faulty%20wine%20install ** Attachment added: Dependencies.txt http://launchpadlibrarian.net/47034071/Dependencies.txt ** Attachment added: Dmesg.txt http://launchpadlibrarian.net/47034072/Dmesg.txt ** Attachment added: DpkgTerminalLog.gz http://launchpadlibrarian.net/47034073/DpkgTerminalLog.gz -- package wine1.2 1.1.31-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 255 https://bugs.launchpad.net/bugs/573209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 521795] [NEW] DBus error - Service Unknown
Public bug reported: Binary package hint: yelp I plugged in my camera to a USB 2.0 port. Powering up the camera brought a warning window, which reads: I received a small window, with the following words: Could not display gphoto2://[usb:001,014]/. Error DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name:1.87 was not provided by any .service files Please select another viewer and try again. OK radio button Description:Ubuntu 9.10 Release:9.10 = end of error message words === libgphoto2-2 (? this is probably correct - Syn. Pkg. Mgr. has no gphoto, it does have libghooto2-2) Usually powering up the camera opens a window asking to copy the contents of the SD memory card into F-Spot. INSTEAD: I received the above referenced message. ProblemType: Bug Architecture: i386 Date: Sun Feb 14 09:18:42 2010 DistroRelease: Ubuntu 9.10 ExecutablePath: /usr/bin/yelp InstallationMedia: Ubuntu 9.10 Karmic Koala - Release i386 (20091028.5) NonfreeKernelModules: nvidia Package: yelp 2.28.0-0ubuntu2 ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-19.56-generic SourcePackage: yelp Uname: Linux 2.6.31-19-generic i686 ** Affects: yelp (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- DBus error - Service Unknown https://bugs.launchpad.net/bugs/521795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 521795] Re: DBus error - Service Unknown
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/39190785/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/39190792/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/39190800/ProcStatus.txt ** Attachment added: XsessionErrors.txt http://launchpadlibrarian.net/39190810/XsessionErrors.txt -- DBus error - Service Unknown https://bugs.launchpad.net/bugs/521795 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 422000] Re: package postfix 2.5.5-1.1 failed to install/upgrade: subprocess pre-installation script returned error exit status 1
While trying to install GSmartControl from Synaptic Package Manager, the process failed, started a auto bug-report which led me here. Synaptic closes/stopped with an error status 1. There were 5 lines of errors with error status 1 and I chose this one, as I'm not sufficiently skilled at computer to know better. thanks. -- package postfix 2.5.5-1.1 failed to install/upgrade: subprocess pre-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/422000 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to postfix in ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 422000] Re: package postfix 2.5.5-1.1 failed to install/upgrade: subprocess pre-installation script returned error exit status 1
While trying to install GSmartControl from Synaptic Package Manager, the process failed, started a auto bug-report which led me here. Synaptic closes/stopped with an error status 1. There were 5 lines of errors with error status 1 and I chose this one, as I'm not sufficiently skilled at computer to know better. thanks. -- package postfix 2.5.5-1.1 failed to install/upgrade: subprocess pre-installation script returned error exit status 1 https://bugs.launchpad.net/bugs/422000 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 211148] [NEW] Panel Icons cannot be locked to their set position
Public bug reported: Binary package hint: gnome-panel I have 7 panel icons on the lower panel. I think that the Sensors Applet may be the problem. The icons on (or in) the panel always locked with the Workplace Switcher rightmost. Now, every time I start gutsy, the icons are in crazy order and never the same twice in a row. Description:Ubuntu 7.10 Release:7.10 apt-cache policy sensorsapplets returns an (W) error and no information. I expected the icons to be locked when the lock to panel is selected. Icons dance hiphop, instead. ProblemType: Bug Architecture: i386 Date: Wed Apr 2 20:39:09 2008 DistroRelease: Ubuntu 7.10 ExecutablePath: /usr/bin/gnome-panel NonfreeKernelModules: nvidia ath_hal Package: gnome-panel 1:2.20.1-0ubuntu1 PackageArchitecture: i386 ProcCmdline: gnome-panel --sm-client-id default1 ProcCwd: /home/mark ProcEnviron: PATH=/home/mark/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-panel Uname: Linux Lexington-19 2.6.22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686 GNU/Linux ** Affects: gnome-panel (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Panel Icons cannot be locked to their set position https://bugs.launchpad.net/bugs/211148 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 211148] Re: Panel Icons cannot be locked to their set position
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/13084013/Dependencies.txt ** Attachment added: ProcMaps.txt http://launchpadlibrarian.net/13084014/ProcMaps.txt ** Attachment added: ProcStatus.txt http://launchpadlibrarian.net/13084015/ProcStatus.txt -- Panel Icons cannot be locked to their set position https://bugs.launchpad.net/bugs/211148 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 120810] Re: [Gutsy] timidity install fails when timidity is already running
I tried the reconfig described above. No luck here. -- [Gutsy] timidity install fails when timidity is already running https://bugs.launchpad.net/bugs/120810 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs