[Bug 1176355] Re: Can't access USB external disk
*** This bug is a duplicate of bug 1161985 *** https://bugs.launchpad.net/bugs/1161985 Hello, I think I have this problem: I have a USB disk enclosure that worked fine until there is very little time (there are a couple of weeks, I transferred 300GB of data ...) Since there were various progreammes especially kernel upgrade in any case I am unable to access the disk (see below excerpt from dmesg and output of fdisk-l) In fact the unit is for the disk that is attached is identified, but that does not go away, it does not recognize the partition table, I checked with fdisk (see below) I'm pretty worried, indeed had my backup market, I checked. It would be weird that right after the drive fails, I would go rather for a driver problem, in fact I had this problem early and after a 13.0 dowgrade to an old version of usisks2 it worked, unfortunately I had not blocked my amendment and subsequent upgrades have invalidated all! Fin de dmesg: ... [ 924.568750] usb 2-1.1: new high-speed USB device number 7 using ehci-pci [ 924.664941] usb 2-1.1: New USB device found, idVendor=1bcf, idProduct=0c31 [ 924.664947] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 924.664952] usb 2-1.1: Product: USB to Serial-ATA bridge [ 924.664956] usb 2-1.1: Manufacturer: Sunplus Innovation Technology [ 924.664959] usb 2-1.1: SerialNumber: FF310003339FE03FF [ 924.666822] usb-storage 2-1.1:1.0: USB Mass Storage device detected [ 924.667262] scsi11 : usb-storage 2-1.1:1.0 [ 925.669347] scsi 11:0:0:0: Direct-Access ST310003 33AS 0200 PQ: 0 ANSI: 4 [ 925.672140] sd 11:0:0:0: Attached scsi generic sg5 type 0 [ 925.672958] sd 11:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 925.679802] sd 11:0:0:0: [sde] Write Protect is off [ 925.679810] sd 11:0:0:0: [sde] Mode Sense: 38 00 00 00 [ 925.686724] sd 11:0:0:0: [sde] No Caching mode page found [ 925.686732] sd 11:0:0:0: [sde] Assuming drive cache: write through [ 925.702369] sd 11:0:0:0: [sde] No Caching mode page found [ 925.702377] sd 11:0:0:0: [sde] Assuming drive cache: write through [ 932.744863] sde: unknown partition table [ 932.765634] sd 11:0:0:0: [sde] No Caching mode page found [ 932.765642] sd 11:0:0:0: [sde] Assuming drive cache: write through [ 932.765647] sd 11:0:0:0: [sde] Attached SCSI disk pierre@bamboo:~$ sudo fdisk -l [sudo] password for pierre: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs Unités = secteurs de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Identifiant de disque : 0xb867 Périphérique Amorçage Début Fin BlocsId. Système /dev/sda1 *2048 575557631 28792 83 Linux /dev/sda2 960006142 976773167 83835135 Étendue /dev/sda3 575557632 960002047 19208 83 Linux /dev/sda5 960006144 976771071 8382464 82 partition d'échange Linux / Solaris Les entrées de la table de partitions ne sont pas dans l'ordre du disque Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 têtes, 63 secteurs/piste, 243201 cylindres, total 3907029168 secteurs Unités = secteurs de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Identifiant de disque : 0xb1aec063 Périphérique Amorçage Début Fin BlocsId. Système /dev/sdb1 *2048 206847 1024007 HPFS/NTFS/exFAT /dev/sdb2 206848 1228795903 6142945287 HPFS/NTFS/exFAT /dev/sdb3 1228795904 3907028991 13391165447 HPFS/NTFS/exFAT Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 têtes, 63 secteurs/piste, 60801 cylindres, total 976773168 secteurs Unités = secteurs de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Identifiant de disque : 0x8d399bc0 Périphérique Amorçage Début Fin BlocsId. Système /dev/sdc1 * 63 976768064 488384001 83 Linux Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 têtes, 63 secteurs/piste, 121601 cylindres, total 1953525168 secteurs Unités = secteurs de 1 * 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 512 octets taille d'E/S (minimale / optimale) : 512 octets / 512 octets Identifiant de disque : 0x Le disque /dev/sde ne contient pas une table de partitions valable pierre@bamboo:~$ pierre@bamboo:~$ sudo fdisk /dev/sde [sudo] password for pierre: Le périphérique ne contient pas une table de partitions DOS ou S
[Bug 1242854] Re: udisks2 prevents external hard drive from working
I have almost the same problem, with the difference with a downgrade in udisks2 2.1.0-2 I managed to run but a new update that was proposed a few days there has canceled all and now the downgrade not give any result. I can not use my external enclosure, I just know that I have over 500 GB! It just may be ums_cypress.ko but I did not go further. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242854 Title: udisks2 prevents external hard drive from working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/udisks2/+bug/1242854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 709752] Re: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build
Oh, sorry! I am on ubuntu 11.04 natty 64bits -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/709752 Title: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 709752] Re: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/709752 Title: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 709752] [NEW] package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build
Public bug reported: At the end of an update without any problem, I got this error. I do not understand, everything looks normal ... ProblemType: Package DistroRelease: Ubuntu 11.04 Package: fglrx 2:8.801-0ubuntu2 ProcVersionSignature: Ubuntu 2.6.37-12.26-generic 2.6.37 Uname: Linux 2.6.37-12-generic x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Sat Jan 29 14:21:25 2011 DistUpgraded: Yes, recently upgraded Log time: 2010-10-13 22:46:17.039631 DistroCodename: natty DistroVariant: ubuntu DkmsStatus: fglrx, 8.801, 2.6.37-11-generic, x86_64: installed fglrx, 8.801, 2.6.37-12-generic, x86_64: installed ErrorMessage: fglrx kernel module failed to build GraphicsCard: Subsystem: PC Partner Limited Device [174b:e104] InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100406) MachineType: Gigabyte Technology Co., Ltd. P55M-UD2 PackageVersion: 2:8.801-0ubuntu2 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.37-12-generic root=UUID=a4946b73-d477-495a-a4e5-dc7e4a868c2b ro quiet splash vt.handoff=7 SourcePackage: fglrx-installer Title: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build dmi.bios.date: 07/31/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F3 dmi.board.name: P55M-UD2 dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF3:bd07/31/2009:svnGigabyteTechnologyCo.,Ltd.:pnP55M-UD2:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP55M-UD2:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: P55M-UD2 dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.fglrx-installer: fglrx-installer N/A version.libdrm2: libdrm2 2.4.23-1ubuntu3 version.libgl1-mesa-glx: libgl1-mesa-glx 7.10-1ubuntu1 version.xserver-xorg: xserver-xorg 1:7.5+6ubuntu8 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:6.13.2+git20110124.fadee040-0ubuntu1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.14.0-1ubuntu2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:0.0.16+git20110107+b795ca6e-0ubuntu1 ** Affects: fglrx-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/709752 Title: package fglrx 2:8.801-0ubuntu2 failed to install/upgrade: fglrx kernel module failed to build -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 655124] Re: Network-manager-openvpn connects but can not be used
I'm on Ubuntu 10.04 and got accepted this morning an update, and now I have the same problem as everyone: Unable to connect to the VPN! Moreover, this one works very well because my other post ubuntu, which has not been updated to work perfectly. Of course, I tested the option in the Route button IPv4, but that's exactly the same. -- Network-manager-openvpn connects but can not be used https://bugs.launchpad.net/bugs/655124 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 529020] Re: unable to connect with screensaver activated
It seems that this happens with ubuntu 10.4, I use the alpha 3 but before I had the same result... -- unable to connect with screensaver activated https://bugs.launchpad.net/bugs/529020 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 529020] [NEW] unable to connect with screensaver activated
Public bug reported: Binary package hint: gnome-screensaver Well, I meet very frequently with Lucid Lynx installed under Virtual Box, the following problem: everything works perfectly but if I leave the window to do something else for a while, return the screensaver wonder heard the password to access the session, but then the keyboard is not taken into account (the mouse cons, yes) yet the only thing is to disable the security saver of screen. This is not cool ... I do further testing with other versions to see if this is not VB ... ** Affects: gnome-screensaver (Ubuntu) Importance: Undecided Status: New -- unable to connect with screensaver activated https://bugs.launchpad.net/bugs/529020 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 516854] Re: [lucid] can't configure VPN
I have same problem and after installing network-manager-openvpn-gnome (and restart) it works ... -- [lucid] can't configure VPN https://bugs.launchpad.net/bugs/516854 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 489987] Re: package dokuwiki 0.0.20090214 b-2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1
** Attachment added: "AptOrdering.txt" http://launchpadlibrarian.net/36232552/AptOrdering.txt ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/36232553/Dependencies.txt ** Attachment added: "Dmesg.gz" http://launchpadlibrarian.net/36232554/Dmesg.gz ** Attachment added: "DpkgTerminalLog.txt" http://launchpadlibrarian.net/36232555/DpkgTerminalLog.txt -- package dokuwiki 0.0.20090214b-2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 https://bugs.launchpad.net/bugs/489987 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 489987] [NEW] package dokuwiki 0.0.2009 0214b-2 failed to install/upgrade: le sous-processus scr ipt post-installation installé a retourné une er reur de sortie d'état 1
Public bug reported: Binary package hint: dokuwiki On my machine I've installed apache, I do not want it, I lighttpd much lighter and faster. If I install the deb dokuwiki clearly it is preconfigured for Apache and so I have only to go fishing around to change things! Indeed it is the same for the package php5-if you do not pay attention automatically installs apache-Would it be possible to change these packages such as the installation of a wiki is not linked to the web server, or the installation of php is not linked to the same server. Currently it has forced the hand as Microsoft chief! I consider it a design bug. ProblemType: Package Architecture: amd64 Date: Sun Nov 29 17:23:44 2009 DistroRelease: Ubuntu 9.10 ErrorMessage: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release amd64 (20091027) NonfreeKernelModules: fglrx Package: dokuwiki 0.0.20090214b-2 PackageArchitecture: all ProcVersionSignature: Ubuntu 2.6.31-15.50-generic SourcePackage: dokuwiki Title: package dokuwiki 0.0.20090214b-2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 Uname: Linux 2.6.31-15-generic x86_64 ** Affects: dokuwiki (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package -- package dokuwiki 0.0.20090214b-2 failed to install/upgrade: le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 https://bugs.launchpad.net/bugs/489987 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 459013] Re: firefox prints only one page, even there are 10 ...
James Pandavan wrote: > Can you please confirm that you used "All Pages" option? > > Oh yes, of course. But I se that some websites are OK with this (i.e http://planet.ubuntu-fr.org/) and others no (i.e http://www.dslvalley.com/dossiers/9box4/neufbox-nat-emule.php) .. Its crazy ! I have now installed AddOn Compatibility Reporter and desactivated all no compatibles addons. -- firefox prints only one page, even there are 10 ... https://bugs.launchpad.net/bugs/459013 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 459013] Re: firefox prints only one page, even there are 10 ...
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/34245776/Dependencies.txt ** Attachment added: "ExtensionSummary.txt" http://launchpadlibrarian.net/34245777/ExtensionSummary.txt ** Attachment added: "XsessionErrors.txt" http://launchpadlibrarian.net/34245778/XsessionErrors.txt ** Attachment added: "profile_default_pluginreg.dat.txt" http://launchpadlibrarian.net/34245779/profile_default_pluginreg.dat.txt ** Attachment added: "profiles.ini.txt" http://launchpadlibrarian.net/34245780/profiles.ini.txt -- firefox prints only one page, even there are 10 ... https://bugs.launchpad.net/bugs/459013 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 459013] [NEW] firefox prints only one page, even there are 10 ...
Public bug reported: Binary package hint: firefox-3.5 firefox 3.5./3 prints only one page even if there are several, even if something is printed in a pdf file! ProblemType: Bug Architecture: i386 Date: Fri Oct 23 13:50:57 2009 DistroRelease: Ubuntu 9.10 NonfreeKernelModules: fglrx Package: firefox-3.5 3.5.3+build1+nobinonly-0ubuntu6 ProcEnviron: LANG=fr_FR.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-14.48-generic SourcePackage: firefox-3.5 Uname: Linux 2.6.31-14-generic i686 ** Affects: firefox-3.5 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- firefox prints only one page, even there are 10 ... https://bugs.launchpad.net/bugs/459013 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 314038] Re: Integrated video interface is broken in Jaunty
Thanks a lot, it resolves my problems of compilation... I installed these packets and this walks very well! -- Integrated video interface is broken in Jaunty https://bugs.launchpad.net/bugs/314038 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 351214] [NEW] After migration from Intrepid to Jaunty, I have not command line and in Synaptics I obtain a " failure of cloning pty" message
Public bug reported: Here is my problem: I made a migration to jaunty beta from Intrepid, with an .ISO image. Now everything works much however I have a very serious problem: it is impossible to have the command line! if I start gnome-terminal I receive an error like "!" There was an error during the creation of the son process for this terminal! Anyway, all terminal programs give me the same thing: a window without prompt! I can't installl or reinstall gnome-terminal, because now, in Synaptic I obtain a "failure of cloning pty" message and of course nothing is done. So, I changed my console with and I installed using dpkg-i the two gnome-terminal packages from http://packages.ubuntu.com/jaunty/gnome/ . After I run sudo apt-get -f install, and then sudo apt-get update ... And I return on my gnome desktop but I have always the same. And, Synaptic is too bugged... Without information I did not know what to do. it'sa shame because it could be very simple ... So,finally I run an installation and not a migration with a CD (and safeguarding /home before) :( and now all is fine! ** Affects: ubuntu Importance: Undecided Status: New -- After migration from Intrepid to Jaunty, I have not command line and in Synaptics I obtain a " failure of cloning pty" message https://bugs.launchpad.net/bugs/351214 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246141] Re: no support for realtek rtl8187se
Great, this works also for me. I put the *.ko in /lib/modules/2.6.27-7-generic/kernel/drivers/net/wireless/ and sudo depmod -a sudo modprobe r8180 and never forget the Fn-F11 button !!! -- no support for realtek rtl8187se https://bugs.launchpad.net/bugs/246141 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246141] Re: no support for realtek rtl8187se
Oh, I am confuse! I have ugraded with 2.6.27.7.8 kernel and after I re- patch and now makedrv and wlan0up works ! -- no support for realtek rtl8187se https://bugs.launchpad.net/bugs/246141 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89650] Re: [apport] wammu crashed with ImportError in ()
Oups, sorry I am late... In intrepid beta the problem seems not exist -- [apport] wammu crashed with ImportError in () https://bugs.launchpad.net/bugs/89650 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246141] Re: no support for realtek rtl8187se
Oups, sorry, my kernel is 2.6.27.7.8 ... -- no support for realtek rtl8187se https://bugs.launchpad.net/bugs/246141 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246141] Re: no support for realtek rtl8187se
I agree with @Caroline Ford : I am just having upgraded my Intrepid on MSI Wind with 2.6.27.8 kernel and I have exactly same errors when I run ./makedrv ! -- no support for realtek rtl8187se https://bugs.launchpad.net/bugs/246141 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 205985] Re: package mysql-server-5.0 5.0.51a-1ubuntu1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1
Hi, I have the same error, even at last I completly remove mysql-server, reboot and install a new one ! -- package mysql-server-5.0 5.0.51a-1ubuntu1 failed to install/upgrade: subprocess new pre-removal script returned error exit status 1 https://bugs.launchpad.net/bugs/205985 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 206723] [NEW] gparted not detect an USB volume
Public bug reported: I am on 8.04 beta; surprisingly a new USB key is detected by gparted but it is unable to give corrects informations! It say that my new PNY key (I buy it 2 hours ago) of 3.73 Go has no partition allocated...And of course this key is mounted and not empty (the [EMAIL PROTECTED]:~# fdisk -l Disque /dev/sda: 500.1 Go, 500107862016 octets 255 heads, 63 sectors/track, 60801 cylinders Units = cylindres of 16065 * 512 = 8225280 bytes Identifiant disque: 0xc40e1260 Périphérique AmorceDébut Fin BlocsId Système /dev/sda1 * 11045 8393931 27 Inconnu /dev/sda21046 10725777546007 HPFS/NTFS /dev/sda3 10726 60801 4022354705 Extended /dev/sda5 10726 11698 7815591 82 Linux swap / Solaris /dev/sda6 11699 1680441013913+ 83 Linux /dev/sda7 16805 47671 247939146 83 Linux /dev/sda8 47672 60801 105466693+ 83 Linux Disque /dev/sdb: 500.1 Go, 500107862016 octets 255 heads, 63 sectors/track, 60801 cylinders Units = cylindres of 16065 * 512 = 8225280 bytes Identifiant disque: 0x8d399bc0 Périphérique AmorceDébut Fin BlocsId Système /dev/sdb1 1 60800 488375968+ c W95 FAT32 (LBA) Disque /dev/sdg: 4009 Mo, 4009230336 octets 16 heads, 32 sectors/track, 15294 cylinders Units = cylindres of 512 * 512 = 262144 bytes Identifiant disque: 0x Périphérique AmorceDébut Fin BlocsId Système /dev/sdg1 * 1 15740 4029424b W95 FAT32 [EMAIL PROTECTED]:~# [EMAIL PROTECTED]:~# fdisk /dev/sdg Le nombre de cylindres pour ce disque est initialisé à 15294. Il n'y a rien d''incorrect avec cela, mais c'est plus grand que 1024, et cela pourrait causer des problèmes en fonction pour certaines configurations: 1) logiciels qui sont exécutés à l'amorçage (i.e., vieilles versions de LILO) 2) logiciels d'amorçage et de partitionnement pour d'autres SE (i.e., DOS FDISK, OS/2 FDISK) Commande (m pour l'aide): p Disque /dev/sdg: 4009 Mo, 4009230336 octets 16 heads, 32 sectors/track, 15294 cylinders Units = cylindres of 512 * 512 = 262144 bytes Identifiant disque: 0x Périphérique AmorceDébut Fin BlocsId Système /dev/sdg1 * 1 15740 4029424b W95 FAT32 Commande (m pour l'aide): q [EMAIL PROTECTED]:~# OK, the key is mounted on /media/disk: [EMAIL PROTECTED]:~# ls -l /media/disk total 396 drwx-- 3 root root 4096 2007-07-11 10:52 PNY_QuickDrive_Data -rwx-- 1 root root 394664 2007-07-02 16:14 PNY QuickDrive.exe -rwx-- 1 root root 1537 2007-07-17 14:46 README FOR INSTALLATION.txt [EMAIL PROTECTED]:~# ls -l /media/disk/PNY_QuickDrive_Data total 12764 -rwx-- 1 root root 9745832 2007-07-02 16:14 AGQDCWP.exe -rwx-- 1 root root 1030144 2007-07-02 16:14 DbgHelp.Dll drwx-- 2 root root4096 2007-07-11 10:52 installer -rwx-- 1 root root 626688 2007-07-02 16:14 libcurl.dll -rwx-- 1 root root 522 2007-07-02 16:14 Microsoft.VC80.CRT.manifest -rwx-- 1 root root 479232 2007-07-02 16:14 msvcm80.dll -rwx-- 1 root root 548864 2007-07-02 16:14 msvcp80.dll -rwx-- 1 root root 626688 2007-07-02 16:14 msvcr80.dll [EMAIL PROTECTED]:~# ls -l /media/disk/PNY_QuickDrive_Data/installer total 3820 -rwx-- 1 root root 1218224 2007-07-02 16:14 AGInstaller.exe -rwx-- 1 root root 1030144 2007-07-02 16:14 DbgHelp.Dll -rwx-- 1 root root 522 2007-07-02 16:14 Microsoft.VC80.CRT.manifest -rwx-- 1 root root 479232 2007-07-02 16:14 msvcm80.dll -rwx-- 1 root root 548864 2007-07-02 16:14 msvcp80.dll -rwx-- 1 root root 626688 2007-07-02 16:14 msvcr80.dll [EMAIL PROTECTED]:~# It is quite annoying :) but I can read and write on the key. ** Affects: ubuntu Importance: Undecided Status: New -- gparted not detect an USB volume https://bugs.launchpad.net/bugs/206723 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 181899] Re: /var/log/dist-upgrade
I have same bug in alpha 3 ** Attachment added: "bugmaj.txt" http://launchpadlibrarian.net/11284438/bugmaj.txt -- /var/log/dist-upgrade https://bugs.launchpad.net/bugs/181899 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151550] lost configuration of grub-gfx
Public bug reported: Well, after I upgrade to Gutsy all work fine. Then I install grub-gfx because it looks like better.. all work fine. But, after I run the update manager I have lost grub-gfx config and at boot time, I have now an old (and horrible) test menu. The menu.lst is modified and I have lost the grub-gfx menu. ** Affects: ubuntu Importance: Undecided Status: New -- lost configuration of grub-gfx https://bugs.launchpad.net/bugs/151550 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 120101] Medibuntu
Public bug reported: After change in /etc/apt/sources.list, I was doing sudo wget -q http://medibuntu.org/repo/medibuntu-key.gpg -O- | sudo apt-key add - and after a time I obtain gpg: aucune donnée OpenPGP valide n'a été trouvée. Is this a bug or now we have an unkeyed repository ? ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Medibuntu https://bugs.launchpad.net/bugs/120101 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 105234] Re: Network manager says disconnected but is connected and working
OK, great! with the latest Feisty upgrade all work fine now! many thanks -- Network manager says disconnected but is connected and working https://bugs.launchpad.net/bugs/105234 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 105234] Re: Netowrk manager says disconnected but is connected and working
Oh, this is my new constatation: if I right click on the Manager icon and deselect cable network, the network is then disable, after I reselect cable network, then the network is enable but also the red indicator disappear and all work fine ! (sorry for my bad english language...) -- Netowrk manager says disconnected but is connected and working https://bugs.launchpad.net/bugs/105234 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 105234] Re: Netowrk manager says disconnected but is connected and working
OK, I have the same bug since yesterday (after I upgrade Feisty). -- Netowrk manager says disconnected but is connected and working https://bugs.launchpad.net/bugs/105234 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list [EMAIL PROTECTED] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 91139] Re: [apport] Xorg crashed with signal 5b43
** Attachment added: "CoreDump.gz" http://librarian.launchpad.net/6724320/CoreDump.gz ** Attachment added: "Dependencies.txt" http://librarian.launchpad.net/6724321/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://librarian.launchpad.net/6724322/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://librarian.launchpad.net/6724323/ProcStatus.txt ** Attachment added: "Registers.txt" http://librarian.launchpad.net/6724324/Registers.txt -- [apport] Xorg crashed with signal 5b43 https://launchpad.net/bugs/91139 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 91139] [apport] Xorg crashed with signal 5b43
Public bug reported: After installing Google earth, the system freeze when I run it. I was unable to do anything else a savage boot. This bug is always reproducing in same manner. After this, xorg is often crashing... ProblemType: Crash Architecture: i386 CrashCounter: 1 Date: Sat Mar 10 15:01:15 2007 Disassembly: 0xb7f1515b: DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/Xorg Package: xserver-xorg-core 2:1.2.0-3ubuntu3 PackageArchitecture: i386 ProcCmdline: /usr/X11R6/bin/X :0 -br -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 ProcCwd: /etc/X11 ProcEnviron: LANGUAGE= PATH=/sbin:/bin:/usr/sbin:/usr/bin LANG=fr_FR.UTF-8 Signal: 5 SourcePackage: xorg-server Stacktrace: #0 0xb7f1515b in ?? () StacktraceTop: ?? () ThreadStacktrace: Uname: Linux banyan 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux UserGroups: ** Affects: xorg-server (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] Xorg crashed with signal 5b43 https://launchpad.net/bugs/91139 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89650] Re: [apport] wammu crashed with ImportError in ()
** Attachment added: "Dependencies.txt" http://librarian.launchpad.net/6609729/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://librarian.launchpad.net/6609730/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://librarian.launchpad.net/6609731/ProcStatus.txt -- [apport] wammu crashed with ImportError in () https://launchpad.net/bugs/89650 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89650] [apport] wammu crashed with ImportError in ()
Public bug reported: Binary package hint: wammu Unable to start it ProblemType: Crash Architecture: all Date: Sun Mar 4 13:38:29 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/wammu InterpreterPath: /usr/bin/python2.5 Package: wammu 0.17-1 ProcCmdline: /usr/bin/python /usr/bin/wammu ProcCwd: /home/pierre ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=fr_FR.UTF-8 SHELL=/bin/bash PythonArgs: ['/usr/bin/wammu'] SourcePackage: wammu Traceback: Traceback (most recent call last): File "/usr/bin/wammu", line 30, in import Wammu ImportError: No module named Wammu Uname: Linux bamboo 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux ** Affects: wammu (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] wammu crashed with ImportError in () https://launchpad.net/bugs/89650 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89579] Re: [apport] wammu crashed with ImportError in ()
** Attachment added: "Dependencies.txt" http://librarian.launchpad.net/6608855/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://librarian.launchpad.net/6608856/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://librarian.launchpad.net/6608857/ProcStatus.txt -- [apport] wammu crashed with ImportError in () https://launchpad.net/bugs/89579 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89579] [apport] wammu crashed with ImportError in ()
Public bug reported: Binary package hint: wammu Nothing else was running ProblemType: Crash Architecture: all Date: Sun Mar 4 02:31:13 2007 DistroRelease: Ubuntu 7.04 ExecutablePath: /usr/bin/wammu InterpreterPath: /usr/bin/python2.5 Package: wammu 0.17-1 ProcCmdline: /usr/bin/python /usr/bin/wammu ProcCwd: /home/pierre ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/bin/X11:/usr/games LANG=fr_FR.UTF-8 SHELL=/bin/bash PythonArgs: ['/usr/bin/wammu'] SourcePackage: wammu Traceback: Traceback (most recent call last): File "/usr/bin/wammu", line 30, in import Wammu ImportError: No module named Wammu Uname: Linux bamboo 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux ** Affects: wammu (Ubuntu) Importance: Undecided Status: Unconfirmed -- [apport] wammu crashed with ImportError in () https://launchpad.net/bugs/89579 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 89411] firefox crashed while I was browsing on the net
Public bug reported: Binary package hint: firefox I dont have any more details, sorry ** Affects: firefox (Ubuntu) Importance: Undecided Status: Unconfirmed -- firefox crashed while I was browsing on the net https://launchpad.net/bugs/89411 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs