[Bug 1164557] Re: Laptop to hot - VID to high
** Description changed: My laptop goes to very hign temperature. First I think it was a fan problem. I adjusted thinkfan to use the disengaded option. Now my fan ist at maximim speed if the temperature goes over 67°C. But still it is not possible to run the laptop for a longer time an 100% CPU. It then overheats and stops working. For example just after clamscan starts working the fan is at maximum speed (5600 revolutions) and the tempurature goes up over 85°C, the CPU usage is the about 70%. My standard governer is "ondemand". By using "powersave" the temparure will be about 5-10°C decrease. My investigation show me that in my oppinum the VID is to high. To varify this i do the following: - rdmsr -p0 [1] 0x0199 for every speed steps - the governer "ondemand" switches the MSR 0x199 between -- 0x0613, which means 1GHz and 1.275V? -- 0x081c, which means 1,33GHz and 1.3875V? -- 0x0b28, which means 1,83GHz and 1.5375V? + - 0x0613, which means 1GHz and 1.275V? + - 0x081c, which means 1,33GHz and 1.3875V? + - 0x0b28, which means 1,83GHz and 1.5375V? > by 100% CPU the laptop overheats and stops - set the governer to userspace 1.833GHz - reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20 > the temparature goes not over 65°C by starting load that goes to 100% CPU!. I see that the VID is allways set to 0x0b28 when the governer change the speed to the highest speed. I don't know if the governer or an other kernel module set the VID The Sped (FID) is selected by the governer. The FID/VID vor maximum should be set to 0x0b20 instead 0x0B28 and every thing would fine. Here are some infos about my system: It is a lenovo Thinkpad R60 rainer@BN591-LINUX:~$ sudo lshw -C display; uname -a; lsb_release -a - *-display -description: VGA compatible controller -product: Radeon Mobility X1400 -vendor: Hynix Semiconductor (Hyundai Electronics) -physical id: 0 -bus info: pci@:01:00.0 -version: 00 -width: 32 bits -clock: 33MHz -capabilities: pm pciexpress msi vga_controller bus_master cap_list rom -configuration: driver=radeon latency=0 -resources: irq:16 memory:d800-dfff ioport:2000(size=256) memory:ee00-ee00 memory:ee02-ee03 + *-display + description: VGA compatible controller + product: Radeon Mobility X1400 + vendor: Hynix Semiconductor (Hyundai Electronics) + physical id: 0 + bus info: pci@:01:00.0 + version: 00 + width: 32 bits + clock: 33MHz + capabilities: pm pciexpress msi vga_controller bus_master cap_list rom + configuration: driver=radeon latency=0 + resources: irq:16 memory:d800-dfff ioport:2000(size=256) memory:ee00-ee00 memory:ee02-ee03 Linux BN591-LINUX 3.2.0-40-generic-pae #64-Ubuntu SMP Mon Mar 25 21:44:41 UTC 2013 i686 i686 i386 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.2 LTS Release: 12.04 Codename: precise rainer@BN591-LINUX:~$ - --- + --- ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 DistroRelease: Ubuntu 12.04 MarkForUpload: True Package: linux (not installed) Tags: precise Uname: Linux 3.9.0-030900rc5-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to precise on 2012-12-12 (113 days ago) UserGroups: adm admin audio avahi avahi-autoipd backup cdrom chipcard crontab daemon dialout dip disk fax floppy fuse gammu gdm gnokii gnumed gsmsms haldaemon libuuid list lp lpadmin mail man messagebus mlocate mysql mythtv netdev ntp nvram operator plugdev polkituser postgres powerdev root rtkit sambashare scanner shadow smsd src ssh ssl-cert sudo sys syslog tape tty users utempter utmp uucp vboxusers vdr video voice www-data - --- + --- ApportVersion: 2.12.6-0ubuntu1 Architecture: i386 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC0: ubuntu 3165 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC0: ubuntu 3165 F pulseaudio CasperVersion: 1.336ubuntu1 CurrentDmesg: - [ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready - [ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready - [ 71.982542] iwl3945 :03:00.0: loaded firmware version 15.32.2.9 - [ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready - [ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready + [ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready + [ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready + [ 71.982542] iwl3945 :03:00.0: loaded firmware version 15.32.2.9 + [ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready + [ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Distro
[Bug 1164557] Re: Laptop to hot - VID to high
Hi, I try to do what asked for. With the Apport-collect they exits some problem. I may be double or incomplet. Sorry. I test 3.12.0-2-generic it overheats the laptop. 3.12.0-31200-generic overheats the laptop too. If any further testing or info is required please call. Thanks and regards Rainer ** Tags removed: needs-upstream-testing ** Tags added: 3.12.0-2-generic kernel-bug-exits-upstream- ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
apport information ** Tags added: trusty ** Description changed: My laptop goes to very hign temperature. First I think it was a fan problem. I adjusted thinkfan to use the disengaded option. Now my fan ist at maximim speed if the temperature goes over 67°C. But still it is not possible to run the laptop for a longer time an 100% CPU. It then overheats and stops working. For example just after clamscan starts working the fan is at maximum speed (5600 revolutions) and the tempurature goes up over 85°C, the CPU usage is the about 70%. My standard governer is "ondemand". By using "powersave" the temparure will be about 5-10°C decrease. My investigation show me that in my oppinum the VID is to high. To varify this i do the following: - rdmsr -p0 [1] 0x0199 for every speed steps - the governer "ondemand" switches the MSR 0x199 between - 0x0613, which means 1GHz and 1.275V? - 0x081c, which means 1,33GHz and 1.3875V? - 0x0b28, which means 1,83GHz and 1.5375V? > by 100% CPU the laptop overheats and stops - set the governer to userspace 1.833GHz - reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20 > the temparature goes not over 65°C by starting load that goes to 100% CPU!. I see that the VID is allways set to 0x0b28 when the governer change the speed to the highest speed. I don't know if the governer or an other kernel module set the VID The Sped (FID) is selected by the governer. The FID/VID vor maximum should be set to 0x0b20 instead 0x0B28 and every thing would fine. Here are some infos about my system: It is a lenovo Thinkpad R60 rainer@BN591-LINUX:~$ sudo lshw -C display; uname -a; lsb_release -a *-display description: VGA compatible controller product: Radeon Mobility X1400 vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:16 memory:d800-dfff ioport:2000(size=256) memory:ee00-ee00 memory:ee02-ee03 Linux BN591-LINUX 3.2.0-40-generic-pae #64-Ubuntu SMP Mon Mar 25 21:44:41 UTC 2013 i686 i686 i386 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.2 LTS Release: 12.04 Codename: precise rainer@BN591-LINUX:~$ --- ApportVersion: 2.0.1-0ubuntu17.1 Architecture: i386 DistroRelease: Ubuntu 12.04 MarkForUpload: True Package: linux (not installed) Tags: precise Uname: Linux 3.9.0-030900rc5-generic i686 UnreportableReason: The running kernel is not an Ubuntu kernel UpgradeStatus: Upgraded to precise on 2012-12-12 (113 days ago) UserGroups: adm admin audio avahi avahi-autoipd backup cdrom chipcard crontab daemon dialout dip disk fax floppy fuse gammu gdm gnokii gnumed gsmsms haldaemon libuuid list lp lpadmin mail man messagebus mlocate mysql mythtv netdev ntp nvram operator plugdev polkituser postgres powerdev root rtkit sambashare scanner shadow smsd src ssh ssl-cert sudo sys syslog tape tty users utempter utmp uucp vboxusers vdr video voice www-data + --- + ApportVersion: 2.12.6-0ubuntu1 + Architecture: i386 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: ubuntu 3165 F pulseaudio + CasperVersion: 1.336ubuntu1 + CurrentDmesg: + [ 71.182993] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready + [ 71.185122] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready + [ 71.982542] iwl3945 :03:00.0: loaded firmware version 15.32.2.9 + [ 72.055058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready + [ 72.055518] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready + DistroRelease: Ubuntu 14.04 + LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Alpha i386 (20131108) + MachineType: LENOVO 9461DXG + MarkForUpload: True + Package: linux (not installed) + PccardctlIdent: + Socket 0: +no product info available + PccardctlStatus: + Socket 0: +no card + ProcFB: 0 radeondrmfb + ProcKernelCmdLine: file=/cdrom/preseed/username.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity + ProcVersionSignature: Ubuntu 3.12.0-2.5-generic 3.12.0 + RelatedPackageVersions: + linux-restricted-modules-3.12.0-2-generic N/A + linux-backports-modules-3.12.0-2-generic N/A + linux-firmware1.117 + Tags: trusty + Uname: Linux 3.12.0-2-generic i686 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + dmi.bios.date: 08/28/2009 + dmi.bios.vendor: LENOVO + dmi.bios.version: 7CETD3WW (2.23 ) + dmi.board.name: 9461DXG + dmi.board.vendor: LENOVO + dmi.board.version: Not Available + dmi.chassis.asset.tag: No Asset Information + dmi.chassis.type: 10
[Bug 1164557] Re: Laptop to hot - VID to high
Rainer, could you please confirm this issue exists with the latest development release of Ubuntu? ISO images are available from http://cdimage.ubuntu.com/daily-live/current/ . If the issue remains, could you please run the following command in the development release from a Terminal (Applications->Accessories->Terminal), as it will automatically gather and attach updated debug information to this report: apport-collect -p linux Also, could you please test the latest upstream kernel available (not the daily folder, but the one all the way at the bottom) following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue.Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags: kernel-fixed-upstream kernel-fixed-upstream-VERSION-NUMBER where VERSION-NUMBER is the version number of the kernel you tested. For example: kernel-fixed-upstream-v3.12-rc7 This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag: needs-upstream-testing If the mainline kernel does not fix this bug, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-VERSION-NUMBER As well, please remove the tag: needs-upstream-testing Once testing of the upstream kernel is complete, please mark this bug's Status as Confirmed. Please let us know your results. Thank you for your understanding. ** Tags removed: overheating vid ** Tags added: kernel-therm needs-kernel-logs needs-upstream-testing regression-potential ** Changed in: linux (Ubuntu) Status: Triaged => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
Hi Joseph, I start reading what I should do to an upstream bug report. I was stopped because I don't be able to determind the correct Maintainer. I don't know which part of the kernel is doind the error. What can I do furthermore?? Thanks and regards Rainer -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
This issue appears to be an upstream bug, since you tested the latest upstream kernel. Would it be possible for you to open an upstream bug report[0]? That will allow the upstream Developers to examine the issue, and may provide a quicker resolution to the bug. Please follow the instructions on the wiki page[0]. The first step is to email the appropriate mailing list. If no response is received, then a bug may be opened on bugzilla.kernel.org. [0] https://wiki.ubuntu.com/Bugs/Upstream/kernel ** Changed in: linux (Ubuntu) Importance: Undecided => Medium ** Changed in: linux (Ubuntu) Status: Confirmed => Triaged -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
Hi, I tryed the apport command twice and it never ends. I allways must kill them (1. after an hour, 2. after a nigth. Parallel I updateted to mainline. As a last trial I tryed the apport again afer booting with mainline kernel. Now apport has worked. The problem still exists with the mainline kernel. But I see one Problem with the mainline kernel: ACPIBatteries does say "No Batteries". Will ignore it. Regards Rainer ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
apport information ** Tags added: apport-collected ** Description changed: My laptop goes to very hign temperature. First I think it was a fan problem. I adjusted thinkfan to use the disengaded option. Now my fan ist at maximim speed if the temperature goes over 67°C. But still it is not possible to run the laptop for a longer time an 100% CPU. It then overheats and stops working. For example just after clamscan starts working the fan is at maximum speed (5600 revolutions) and the tempurature goes up over 85°C, the CPU usage is the about 70%. My standard governer is "ondemand". By using "powersave" the temparure will be about 5-10°C decrease. My investigation show me that in my oppinum the VID is to high. To varify this i do the following: - rdmsr -p0 [1] 0x0199 for every speed steps - the governer "ondemand" switches the MSR 0x199 between - 0x0613, which means 1GHz and 1.275V? - 0x081c, which means 1,33GHz and 1.3875V? - 0x0b28, which means 1,83GHz and 1.5375V? > by 100% CPU the laptop overheats and stops - set the governer to userspace 1.833GHz - reduce the VID using: wrmsr -p0 [1] 0x0199 0x0b20 > the temparature goes not over 65°C by starting load that goes to 100% CPU!. I see that the VID is allways set to 0x0b28 when the governer change the speed to the highest speed. I don't know if the governer or an other kernel module set the VID The Sped (FID) is selected by the governer. The FID/VID vor maximum should be set to 0x0b20 instead 0x0B28 and every thing would fine. Here are some infos about my system: It is a lenovo Thinkpad R60 rainer@BN591-LINUX:~$ sudo lshw -C display; uname -a; lsb_release -a *-display description: VGA compatible controller product: Radeon Mobility X1400 vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:16 memory:d800-dfff ioport:2000(size=256) memory:ee00-ee00 memory:ee02-ee03 Linux BN591-LINUX 3.2.0-40-generic-pae #64-Ubuntu SMP Mon Mar 25 21:44:41 UTC 2013 i686 i686 i386 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.2 LTS Release: 12.04 Codename: precise rainer@BN591-LINUX:~$ + --- + ApportVersion: 2.0.1-0ubuntu17.1 + Architecture: i386 + DistroRelease: Ubuntu 12.04 + MarkForUpload: True + Package: linux (not installed) + Tags: precise + Uname: Linux 3.9.0-030900rc5-generic i686 + UnreportableReason: The running kernel is not an Ubuntu kernel + UpgradeStatus: Upgraded to precise on 2012-12-12 (113 days ago) + UserGroups: adm admin audio avahi avahi-autoipd backup cdrom chipcard crontab daemon dialout dip disk fax floppy fuse gammu gdm gnokii gnumed gsmsms haldaemon libuuid list lp lpadmin mail man messagebus mlocate mysql mythtv netdev ntp nvram operator plugdev polkituser postgres powerdev root rtkit sambashare scanner shadow smsd src ssh ssl-cert sudo sys syslog tape tty users utempter utmp uucp vboxusers vdr video voice www-data ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1164557/+attachment/3622574/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1164557] Re: Laptop to hot - VID to high
Would it be possible for you to test the latest upstream kernel? Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest v3.9 kernel[0] (Not a kernel in the daily directory) and install both the linux-image and linux-image-extra .deb packages. If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'. If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'. If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'. Once testing of the upstream kernel is complete, please mark this bug as "Confirmed". Thanks in advance. [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.9-rc5-raring/ ** Tags added: kernel-da-key -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1164557 Title: Laptop to hot - VID to high To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1164557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
