[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
hello. Depending on the version I use kubuntu kernel, I do not have the same detection capability. The sensitivity would be concerned mainly via the register BBP which would not be managed the same way, I'm hardy kernel with a gusty, I also tested regularly intrepid, depending on the version of the kernel, I do not have the same sensitivity, all that would link to register BBP, so most of the time it did not detect my wireless connections If you like, you could resolve the problem of sensitivity? http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?t=3434 example of a subject in the report, most of the problems of detection should come from this register. Sincerely yours Hardware : Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) Link Signal level=-77 dBm (with gutsy kernel, and iwconfig ) Signal level=-81 dBm (with gutsy kernel and iwlist wlan0 scan) [use google for translate this, sorry :-) ] -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
This bug has been closed for a while, so people still having troubles probably need to open new bugs to get them looked at as they are probably different issues. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Sorry for asking a stupid question, but I'm experiencing problems with the rt2500pci driver on an old PCI wifi card (which, incidentally, worked flawlessly, fast and smooth on Feisty Fawn!) and installing linux-backports-modules-2.6.24-generic didn't solve my problem. I tried blacklisting rt2500pci in /etc/modprobe.d/blacklist to no avail - network manager didn't see my wireless capability at all. I might have overlooked something obvious here, but as far as I can see, this is not fixed? Is there some more manual tweaking required to get this flying? Thanks! -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
UBUNTU VERSION: HARDY 2.6.24-17-generic (gutsy upgrade) lsusb : 07d1:3c03 D-Link System USB WIRELESS DLINK: DWL-G122 H/W VER. C1. NETWORK WIRELESS 801G, WEP, HEXADECIMAL. Got it to work eventually with the rt73usb driver. added a line to the following file, /etc/modules: rt73usb Saved, closed rebooted. Opened up network manager (via menu: System, Administration, Network) and manually configured Wireless connection. Entered wep settings via (via properties button). -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
lbm version with rt61 - even worse, more crashes, harder to connect. I had to revert to normal version. :( -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
RT61 PCI (module rt61pci) on Hardy Heron sometimes (during downloading files from Internet) crashes Ubuntu. The screen freezes, the keyboard leds - capslock and numlock - are blinking and there is no response to any button (alt+f1 for example) or mouse movements. Also it doesn't always connect, sometimes I need to use sudo /etc/init.d/networking restart. From syslog: May 17 08:45:44 d700 kernel: [ 311.132490] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 17 08:45:45 d700 kernel: [ 311.879292] wlan0: Initial auth_alg=0 May 17 08:45:45 d700 kernel: [ 311.879305] wlan0: authenticate with AP 00:1a:70:95:f7:5c May 17 08:45:45 d700 kernel: [ 311.880763] wlan0: RX authentication from 00:1a:70:95:f7:5c (alg=0 transaction=2 status=0) May 17 08:45:45 d700 kernel: [ 311.880772] wlan0: authenticated May 17 08:45:45 d700 kernel: [ 311.880776] wlan0: associate with AP 00:1a:70:95:f7:5c May 17 08:45:45 d700 kernel: [ 311.896597] wlan0: RX AssocResp from 00:1a:70:95:f7:5c (capab=0x461 status=0 aid=1) May 17 08:45:45 d700 kernel: [ 311.896606] wlan0: associated May 17 08:45:45 d700 kernel: [ 311.898244] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready May 17 08:45:45 d700 dhclient: There is already a pid file /var/run/dhclient.ra0.pid with pid 134519072 May 17 08:45:45 d700 dhclient: Internet Systems Consortium DHCP Client V3.0.6 May 17 08:45:45 d700 dhclient: Copyright 2004-2007 Internet Systems Consortium. May 17 08:45:45 d700 dhclient: All rights reserved. May 17 08:45:45 d700 dhclient: For info, please visit http://www.isc.org/sw/dhcp/ May 17 08:45:45 d700 dhclient: May 17 08:45:45 d700 dhclient: wmaster0: unknown hardware address type 801 May 17 08:45:46 d700 ntpdate[6637]: step time server 91.189.94.4 offset -1.316687 sec May 17 08:45:45 d700 avahi-daemon[5565]: Registering new address record for fe80::21b:11ff:fec5:1f2b on wlan0.*. May 17 08:45:45 d700 dhclient: wmaster0: unknown hardware address type 801 May 17 08:45:45 d700 dhclient: Bind socket to interface: No such device May 17 08:45:54 d700 kernel: [ 321.999047] wlan0: no IPv6 routers present my note: here the system crashed May 17 08:55:39 d700 syslogd 1.5.0#1ubuntu1: restart. from messages: May 17 08:57:29 d700 kernel: [ 179.814629] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 17 08:57:30 d700 kernel: [ 180.569922] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready my note: here the system crashed May 17 09:09:58 d700 syslogd 1.5.0#1ubuntu1: restart. Nothing interesting in XOrg log. Sorry if this is a wrong but to attach this to. ;) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I established rt2500-CVS driver from serialmonkey, and now I do not have problems :) [quote] ra0 RT2500 Wireless ESSID:Valeri Mode:Managed Frequency=2.437 GHz Access Point: 00:15:0C:74:88:CD Bit Rate=54 Mb/s Tx-Power:0 dBm RTS thr:off Fragment thr:off Link Quality=73/100 Signal level:-75 dBm Noise level:-85 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 [/quote] sorry for my English:) ** Attachment added: install rt2x00-CVS Hardy http://launchpadlibrarian.net/14477975/install%20rt2x00-CVS%20Hardy -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Marking this Fix Released as Stefan's patch is available in linux- backports-modules: linux-backports-modules-2.6.24 (2.6.24-16.14) hardy; urgency=low [Stefan Bader] * Added rt2x00 driver from serialmonkey.org - LP: #134660 For the full changelog refer to: https://edge.launchpad.net/ubuntu/+source/linux-backports-modules-2.6.24 If you are still experiencing issues, refer to comment 254 - https://bugs.edge.launchpad.net/ubuntu/+bug/134660/comments/254 Thanks. ** Changed in: linux-backports-modules-2.6.24 (Ubuntu) Status: Fix Committed = Fix Released ** Changed in: linux-backports-modules-2.6.24 (Ubuntu Hardy) Status: Fix Committed = Fix Released -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Finally I got my D-link dwl-g122 rev b (rt2570 chipset) working with hardy using ndiswrapper. Try it, just remember to use the i386 version of ubuntu, because ndiswrapper won't explicitly warn you about incompatibility between 64bit kernel and 32bit driver. Good luck! -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Ho ho. Running the installer with wine did leave the files in several silly places (whoever wrote the installer should be taken out and shot) but - fingers crossed - the backports modules version seems to avoid the lockup problem. It doesn't like being woken up after hibernating (I have to restart to get the wireless network back) and for some reason, the two LEDs on the card are permanently on rather than flickering away when there's some network action, but... -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
On 2008-05-02 00:02, Neil Wallace wrote : On 2008-05-01 22:56, Ian wrote : Thanks to André and Ashley (comments 252 and 253) - when I have it up long enough to download wine, Ill try that. Ian, Wine is unlikely to help you have it up for longer. Both of you probably love puns, Ian and Neil ;-) My added fun was to find your messages right next to another one titled : Votre Pharmacie en ligne, Viiiaaa -ra - 0.88 EURO (your pharmacy online ...) Now, just as serious as we must be... He wants to download wine to be able to extract drivers liable to keep his interface up all the time. But again, don't tell this to anyone on the street without some preliminary word of warning :-) André. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Thanks to André and Ashley (comments 252 and 253) - when I have it up long enough to download wine, Ill try that. There's more on the problems I've had at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/206068 -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Ian, Wine is unlikely to help you have it up for longer. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Top marks for innuendo. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
As I said already I installed Hardy with Virtualbox on my Gutsy System some time ago. With the Hardy alpha kernel inside the Virtualbox System I was able to use my RT2570 (USB) interface without any problems (I was able to connect and to download with full 6k DSL speed, didn't tested more). After really installing Hardy beta on my linux partition the connection failed again... Today I installed the serialmonkey CVS hourly tarball rt2570-cvs-2008042709 and now it seems to be a stable connection with 54 Mbit when using static IP settings. DHCP does not work. Will there be any updates in the backports? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Also affects: linux-backports-modules-2.6.22 (Ubuntu) Importance: Undecided Status: New ** Also affects: linux-backports-modules-2.6.24 (Ubuntu) Importance: Undecided Status: New ** Changed in: linux-backports-modules-2.6.22 (Ubuntu Hardy) Status: New = Invalid ** Changed in: linux-backports-modules-2.6.24 (Ubuntu Hardy) Importance: Undecided = High Assignee: (unassigned) = Stefan Bader (stefan-bader-canonical) Target: None = ubuntu-8.04.1 ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu) Target: ubuntu-8.04 = None -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
commit 13c78d70f397c31ca9cf3043114a218751514551 Date: Fri Apr 25 12:19:09 2008 -0400 UBUNTU: rt2x00: Update driver to serialmonkey version 2.1.5 ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu) Status: Confirmed = Won't Fix ** Changed in: linux-backports-modules-2.6.24 (Ubuntu Hardy) Status: New = Fix Committed -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I am experiencing a problem with serial monkey rt73 drivers. On boot the hardware device is not starting and cannot be detected. I have to wait until the system is fully booted. unplug the usb adapter, plug it back in and restart the network by cli to get the network adapter started. What is up with that? This is with rt73-cvs-daily-apr-25-2008 the one before that does not even work any more, although it worked in gutsy. What is going on here fellas. This problem is new to me in hardy. Will there be a fix for this. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
On Mon, Apr 21, 2008 at 11:05 PM, Ian [EMAIL PROTECTED] wrote: Annoyingly using ndiswrapper isn't an option for me, because the card maker only supplies a Windows .exe file which isn't an archive format 7zip knows about, not .inf files. Ian, just run the installer .exe under WINE - I've done this many times before to extract Windows wireless drivers. e.g. wine setup.exe On one occasion the installer would not even install properly, and would delete all temporary files when it failed and exited. So I had to let it unpack all files, and then leave it waiting at an OK prompt, then browse the temporary folder where it had unpacked them to find the .inf file. I think that's pretty rare, though. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu Hardy) Target: ubuntu-8.04 = ubuntu-8.04.1 ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu Hardy) Target: ubuntu-8.04.1 = ubuntu-8.04 -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I am closing this as won't fix for now and for the lum target. This is by no way meant as if we do want to drop the subject. However there seem to be some which have the kernel driver working for them. For others the external version (now in lbm works better), The lbm version also will be the one to change/fix more likely, since it is outside the kernel. Also this report now has several hardware and several issues grouped together which does not make matters simpler. So, if there are problems with the kernel driver, try lbm. If there are still problems a new report should be made for the various issues (and should mention the driver used). ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu Hardy) Status: Confirmed = Won't Fix -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I can confirm that in hardy RC suddenly the rate is by default 1MB/s. This was not the case in earlier hardy kernels. Manually setting the rate to 54M, I get downloads of 1MB/s (20 Mbit line). Setting the rate manually should not be necessary. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Sorry, this was for the rt2500 chip (rt2x00pci driver). -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I had the same problem as Jos with Hardy RC after upgrading from Gutsy. But even setting the speed manually did not seem to give me full speed. I resorted to downloading the latest CVS driver from serial monkey and that works fine. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Found some relevant comments about why the speed of the connection may be lower than expected. http://lwn.net/Articles/278191/ To quote it here: At the moment the semi-free madwifi is more reliable than ath5k with 2.6.25-rc kernels[*], due (I suspect) to problems with the mac80211 layer being rather too aggressive in reducing the link speed in face of less than ideal signal conditions. Signal quality/level monitoring (using wavemon) suggests that unsmoothed values are causing the rate algorithms to believe that conditions are worse than they actually are. I see similar problems with the in-kernel rt2500 driver. And in another comment from there It appears to be tweakable via debugfs. - http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID Hope this is helpful to some ... -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Funny, this is what I had ready to post just while finding the above. According to my tests, it seems to me that the problem is not that the interface is set to rate 1M, but to rate auto, and that this automatic bitrate adjustment mode is broken, setting rate down to 1M. Hence, I have put this script in /etc/network/if-up.d under any name. #!/bin/bash # Only for wlanX... [[ $IFACE == wlan* ]] || exit 0 iwconfig $IFACE rate 36M to use a fixed bitrate. 54M is not necessarily the best value and you'll have to experiment, these were my rough results. 54M 140 KiBps 48M 170 36M 190 24M 180 It continues to be a mystery why the transmission rate is so low and still varies more than surrounding noise can explain (packet size adjustment? but that's sending side matter). Anyway, doing away with having to compile the divers to continue each Ubuntu installation is excellent work. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
With the 2.6.24-16 kernel, I no longer need to change the setup of the wireless network (DHCP to static IP or vice versa) before my card will work. (See comment 140, 142 and 143 above.) Unfortunately, it looks like there's a wireless network related bug in 2.6.24.* that frequently causes a kernel panic (= system lockup) here. Does anyone else get this? Annoyingly using ndiswrapper isn't an option for me, because the card maker only supplies a Windows .exe file which isn't an archive format 7zip knows about, not .inf files. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I compiled and installed the serialmonkey drivers for rt2500 and blacklisted the old ones, and moved the .ko-file to the right place. It's dirty, but it worked, now I get full speeds with my rt2500 card, possibly even faster than I ever did in Gutsy! :) Though I don't think the upload is quite up to what I should be able to get, just a feeling, it mostly works well. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
After a few days of testing I want to tell to all of us struggling with a hardy kernel on top of gutsy that the best way to go is to install hardy: everything works much better in hardy than in gutsy with updated kernel, wicd a must AFAICT. I also have to say that things are working better than before but we're not there yet: the hardware dies after a few hours online, while it used to die after a bunch of minutes before; this is an improvement but things are not working as they should and some more work has to be done. This is in regard of the rt73 dongle, still no luck with the rt2570 as of today. Regarding the linux-backports-modules-hardy package: I installed this too but did not notice any benefit, how do I make sure the kernel is loading the backport modules instead of the default ones? Going to the /lib/modules directory shows that both modules are installed in different locations and I really do not know how to verify which generation of module is being loaded. A nice weekend to everybody, luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I'm on a RT2500 card. This is how it looks in lshw under Gutsy: *-network description: Wireless interface product: RT2500 802.11g Cardbus/mini-PCI vendor: RaLink physical id: 2 bus info: [EMAIL PROTECTED]:06:02.0 logical name: wmaster0 version: 01 serial: 00:0d:f0:1d:31:b1 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list logical ethernet physical w ireless configuration: broadcast=yes driver=rt2500pci ip=192.168.0.5 lat ency=32 module=rt2500pci multicast=yes wireless=IEEE 802.11g In Gutsy my network worked well, it had some troubles but overall I was quite happy with it. Then I upgraded to Gutsy, and now I'm experiencing the troubles described in this report. The speeds are unbelievably slow, three times slower than I was on Gutsy and almost 10 times slower than my sister's (we can't loose to VISTA!) according to speedtest.nl (conducted with in Gutsy via the Live CD...). If I use download something under Hardy and ping my router at the same time I get ping times like 25 000ms and packetlosses of up to 25% it seems. I upgraded from Hardy via the upgrade tool by the way, but it all worked under Gutsy. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hello world, I've set up a wpa2 with tkip/aes encryption network and the rt73 dongle is working via network manager in hardy with 2.6.24-16-generic kernel (32-bit); I tried to open 35 tabs at once in firefox while downloading ubuntu's updates and playing videos from websites, it's been working so far, the only thing being that the connection info window in network manager states a 1 mb/s speed while it is 54 mb/s according to iwconfig. I may test the rt2570 dongle sometimes and report on it soon after. ciao luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I'd like to mention linux-backports-modules again. There's a new version of rt2x00 in there. Install with: sudo apt-get install linux-backports-modules-hardy -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Sorry to verify that the rt2570 dongle above mentioned does not work period. Regarding the rt73 dongle: upon restart both network manager and/or manual configuration ask for wpa password while the network is configured for wpa2, I switched to wicd and it works much better now: it retains the correct password for the proper wpa2 configuration, moreover, no need to enter the keyring manager password too; as the rt73 stick is working I'll quit thinkering with it, while I'm going to test the rt2570 stick with the linux-backports-modules. ciao again luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
On Wed, Apr 16, 2008 at 4:59 PM, _oOMOo_ [EMAIL PROTECTED] wrote: Just to satisfy my curiosity, seeing that the version in backports is a) newer and b) appears to work better than the packaged version, why is it not already in Hardy? because it's backported from linux 2.6.25 (which is an unstable kernel - so the odd minor version number) and because hardy officially ships with 2.6.24 -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Thanks Andreas the linux-backports-modules-hardy package has fixed the slow connection problems I was having with the standard module: transferring across the network now is ~1mb/s as expected, around the same as I get with the legacy rt73 module. Will see how it pans out, looking good so far. Just to satisfy my curiosity, seeing that the version in backports is a) newer and b) appears to work better than the packaged version, why is it not already in Hardy? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I posted some time ago my information: rt2500 in a pcmcia card (and other one in PCI) that works flawless in gutsy (with minor issues like not reporting rate) results in a card that works in hardy, but terribly slow. After connecting, if you do: $sudo iwconfig wlan0 rate 54M ...then problems seems to go away. I'm connecting to a wpa-psk g access point, and getting between 1000 and 2000 KiB/s with the pcmcia, and 1500-2400 KiB/s with the PCI one. The news: I tried the linux-backports-modules-hardy package and my problems persisted. By the way, i'm trying to workaround with a simple script in /etc/network/if-up.d/ with no success at all. That simple script is like this: [EMAIL PROTECTED]:~$ cat /etc/network/if-up.d/99rt2500_hack #! /bin/sh # Only for wlan0... [ $IFACE = wlan0 ] || exit 0 wait 5 iwconfig wlan0 rate 54M This seems to works at first sight, but it isn't working at all: iwconfig report a 54Mb rate, but practical speed seem to be limited to 80 KiB/s, very far from the 1000/1500 KiB/s I usually achieve. I'm not sure if this helps anyone. I just saw people go on reporting and wondered if this improves the information a gave previously. Regards. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Andreas, the linux-backports-modules thing seems to be working great with rt73usb :) Thanks for that! -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Unfortunately, I cannot report any success at all... I'm using a rt2500-based card by Foxconn: $ lspci | grep RT2500 05:06.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01) $ lspci -n | grep 05:06.0 05:06.0 0280: 1814:0201 (rev 01) WEP HEX 128-bit based encryption. I'm not able to associate to my AP at all. I'm attaching dmesg and iwconfig output from rt2500pci as well as ndiswrapper (which I'm currently using) ** Attachment added: dmesg-rt2500pci http://launchpadlibrarian.net/13529035/dmesg.log -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Attachment added: iwconfig-rt2500pci http://launchpadlibrarian.net/13529044/wlan0.log -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Attachment added: linux-backports-modules-hardy version info http://launchpadlibrarian.net/13529049/linux-backports-modules-hardy.log -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Attachment added: dmesg-ndiswrapper http://launchpadlibrarian.net/13529059/dmesg-ndiswrapper.log -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
** Attachment added: iwconfig-ndiswrapper http://launchpadlibrarian.net/13529063/wlan0-ndiswrapper.log -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Realtek RT61 finally works. It didn't work in Gutsy so my acknowledgemente for the developers team. On Tue, Apr 15, 2008 at 4:45 AM, Stuart Bishop [EMAIL PROTECTED] wrote: Is there any hope of getting the backport on the install CD somewhere in time for hardy release? If not, is this suitable for mentioning in the release notes or install guide? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a direct subscriber of a duplicate bug. ** Attachment added: unnamed http://launchpadlibrarian.net/13462156/unnamed -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Jose R. Padilla, Does it work with full WPA2 support and Network Manager? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
No, it doesn't. It works with WEP 128 encryption and network manager in Kubuntu, but I will test with WPA2 support and I will report it. On Tue, Apr 15, 2008 at 2:27 PM, wieman01 [EMAIL PROTECTED] wrote: Jose R. Padilla, Does it work with full WPA2 support and Network Manager? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a direct subscriber of a duplicate bug. ** Attachment added: unnamed http://launchpadlibrarian.net/13463828/unnamed -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I thought so. Let us know if there is any progress. WEP is pointless as it is highly insecure. Anyway, thanks for responding quickly. :-) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hi everybody, I took a test drive on gutsy with hardy's 2.6.24-16 generic 32-bit kernel: my rt73 dongle works (wep 128, no network manager); the other dongle I own wich is rt2570 based does not work at all as usual; I could not test on a fresh install of hardy as trying to open the network configuration app would stall the computer with a suspicious repeated clicking of the hard drives (?!) I'll try wpa as soon as I can spare some time and report back. ciao luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
More on the previous post: I booted hardy and did not bother to try manual network configuration but went the network manager route; I can now confirm that the rt73 stick works (it's on right now) while the rt2570 does not (still talking of wep as wpa has never been an option with my hardware), there's an improvement however, as the rt2570 dongle now connects via network manager even if the connection itself is very bad and unfit for normal use; I'll try to set up a wpa network and doing tests in such an environment as soon as I can. ciao again luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
on 2.6.25 (from which the driver comes) n-m doesn't work with wpa, however I can connect via wifi-radar On Tue, Apr 15, 2008 at 6:42 PM, luca.mg [EMAIL PROTECTED] wrote: Hi everybody, I took a test drive on gutsy with hardy's 2.6.24-16 generic 32-bit kernel: my rt73 dongle works (wep 128, no network manager); the other dongle I own wich is rt2570 based does not work at all as usual; I could not test on a fresh install of hardy as trying to open the network configuration app would stall the computer with a suspicious repeated clicking of the hard drives (?!) I'll try wpa as soon as I can spare some time and report back. ciao luca -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a direct subscriber of the bug. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hey, I'm with rt73usb under the latest Hardy beta live cd, and the connection seems alright :) Didn't die on me, and I was daring (opening all sorts of tabs at once)! The signal is a bit unstable though. I'm right next to the router and it shows 52% of signal, and then 83%, and then 68%. That's not such a big problem for me (as long as it stays alive), but thought I should let you know. Either way, I'm installing Hardy beta right now! ~o. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
By the way, I use WEP hexa. Suits me. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Oh well. Wireless connection (with rt73usb) dying again after that big update after I installed Hardy beta. Anyone can let me know if there's something I can do? You were saying something about a backport- thingy...? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
My rt73 chipset shows no noticeable improvement using the test v4. Similar to Olivia's experience of the standard Hardy module - I can connect and surf the web, but the speed is variable and really slow ~80kbps (WPA). I'm back using the legacy rt73 module which compiles and works really well on the Hardy kernel. Olivia, if you aren't having any success with the rt73usb module and really need wireless to work then compiling the rt73 module is a not-too-tricky option. Slightly onerous that network- manager doesn't work with it - though WICD has Ralink Legacy support as an alternative. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
_oOMOo_, I'm pretty useless when it comes to compiling stuff. I did try to compile some rt73 following a tutorial on the ubuntu foruns, but with no luck. If you could email me and perhaps give me a hand with it, I'd really appreciate it :) ([EMAIL PROTECTED]) I also noticed that sometimes after I lose the connection and it comes back (apparently for no reason), the connection seems estabilished but I can't surf the web. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hey, can anyone draw this for me? I'm a bit lost :) My card uses rt73usb, can I expect it to work when the final version of Hardy is released? (I'm sure I wouldn't be able to compile anything anyway). -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hopefully I am not promising too much, but the current intention is to have two possible choices: 1. The kernel driver at the stage of 2.6.24. If this works, good. :) 2. The more recent version of the rt2x00 driver with some modifications to make it compile and load outside of the kernel. This will then be part of the linux-backport-modules package. So everyone would have the freedom of either using one or the other. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Is there any hope of getting the backport on the install CD somewhere in time for hardy release? If not, is this suitable for mentioning in the release notes or install guide? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
2.1.4 is in linux-backports-modules, I think we should close this, as soon as this version proves to work or at least work better. This bug doesn't make any sense anyway because it's deals with several completely different problems... -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
The driver included in the backports package has worse signal, because of Tx-power is 18dB instead of the 27dB I get with the stock kernel drivers. Should I fill a new bug report about that? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I have a rt2500 card and with rt2x00-test-v4 and kernel 2.6.24-16-generic works for me, too. also the speed problem is gone. :) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Still the same problem: worse range because of Tx-power is 18dB instead of 27 with the kernel drivers! Other than that, it seems to work fine, sad I need those extra dB so that it works reliable. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
For those people with speed problems: Try setting the rate manually to 54Mbs -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Wicd solved the problem for me, I'm using rt61. See my duplicate bug: https://bugs.launchpad.net/ubuntu/+bug/211443 -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I tested both rt2x00-test-v3 and -v4 on http://people.ubuntu.com/~smb/rt2x00-test/ and neither managed to get my rt61 pci card connecting to a hidden WPA2-AES network. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
v4 works with my rt2500 card and wpa encrypted network. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
and no problems with 2.6.24-16-generic. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hi, I have 2 Edimax EW-7108PCg cards (rt61pci driver), one in gutsy with hardy kernel and another in hardy beta with all updates. Both systems are connected to the same access point (with WPA1/AES) and the connection doesn't fall as it did with the gutsy kernel, but it's still inconstant in signal detection and performance. The information about the connection is also wrong, I think. This is what i see with iwconfig: wlan0 IEEE 802.11g ESSID:Casa Mode:Managed Frequency:2.412 GHz Access Point: 00:18:F3:98:D3:C4 Bit Rate=1 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2346 B Link Quality=48/100 Signal level=-40 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 the quality is varies from 50% to 90% with the wireless card and the access point in the same room and the bit rate is always 1Mb/s!!! Copying a music album (~100Mb) from one computer to the other takes arround 15 min. Too slow! So, for me rt61pci from hardy is more stable, but much more slow than in gutsy. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
same problem here: TP-LINK WN321G is recognized and it sees networks, but the connection is very slow and incostant. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Re: the D-Link DWA-110 (rt73), with the v3 test I can connect happily to a WPA2 network. Probably worth ignoring the WEP problem - other people have had difficulty connecting to that network so might be an issue with the Airport Extreme base station. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Turns out I'm only able to connect to unsecured networks with the DWA-110, and am unable to connect to my local 128bit WEP netework. I have no idea if this is a seperate bug. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I can report success with your rt2x00-test-v3.tgz. This was on a fresh hardy beta install and a D-Link DWA-110 USB Stick (r73). make sudo make install sudo depmd -ae sudo modprobe -l sudo update-initramfs -u -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Version 3 works here and it seems to be a stable connection with 54mb/s :). I am using a wpa encrypted wlan network, so I cannot confirm general problems with encryption. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I don't get any connection - rt2x00usb does not detect by card (rt2570 usb) and rt2500usb detects it but there I unable to establish a connection... You updated packages does not work as well. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Tried Kubuntu Hardy and my rt2570 (Linksys WUSB54G V4) could not establish a connection with my WPA2 secured network. It fails badly although it recognizes it. I will once again revert to using 'ndiswrapper'. How sad. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Caesare: Thanks for the feedback. Sorry I still had some glitches in the scripts that convert the driver. I just put an updated version of the external driver to http://people.ubuntu.com/~smb/rt2x00-test/ which removes the double prefix issues and hopefully also fixes the uninitialized pid algo. BTW, I try to get the init function named differently from the standard kernel mac80211 so it might co-exist with the kernel module. I also enabled the mesh code in this version. @IvD: Maybe you could have a glimpse at that package and check for obvious mistakes. That would be very much appreciated. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
second Version of rt2x00-test did not work here. I do not know how to give a better feedback, so let me know, if I can attach some logs etc. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
See my comment in bug #203758 -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Stefan, first of all thanks for the terrific job you are doing! Re. the still failing initialisation, I think we are missing the initialisation call (rt2x_rc80211_pid_init) in ieee80211.c. If we don't define RC80211_PID_COMPILE when we compile it then the wrong path will be taken by the preprocessor in ieee80211.h. It should be enough to add a CFLAGS_ieee80211.o += -DRC80211_PID_COMPILE in Makefile. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@IvD Thanks. I hope this does not cause confusion for the other bug since everything with rt2x_ prefix is just currently done by me for testing purposes. The reason for not using the native mac80211 is because with the version of mac80211 that is in Hardy the compile of the latest driver (which is supposed to fix a lot of bugs) fails. So I need the versions kernel that comes with the git repository of the rt2x00 project but have to somehow get it working while the older modules are still around. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Cessare Youre right. It is only defined for rc80211_pid_algo but would be defined as a function doing nothing for ieee80211.c. If you change that. Do you get further in activation? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Stefan, yes, adding CFLAGS_ieee80211.o += -DRC80211_PID_COMPILE to the mac80211 Makefile allows me to initialise, I still fail the association though. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Cesare, ok, so I put that change in and update package so others can try. Is the output currently the same as in https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.22/+bug/134660/comments/178? Otherwise the syslog output might be helpful. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Stefan, yes, exactly the same. One question I forgot to ask, I see you have renamed some rt2x_ prefixes to rt2x__ or rt2x___, or perhaps its just a problem of the script you are using? -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Cesare, ok, I try to find out more. For the prefix issue: that might be coincidence, some functions begin with one or two underscores and just get prefixed with rt2x_. So in the end they have several underscores in them. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Just would like to : [ 1 ] Confirm this bug [ 2 ] The solution : install the latest driver : http://backports.ubuntuforums.com/showpost.php?p=2395871postcount=1 The solution is very simple, there was even no need to reboot. It works straight away. Hope it helps somone. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@harry: actually that's not the latest driver, but it's still the old legacy, which was already reported to (usually) work; still no support for network manager, though (even though I actually still don't have it with the new driver either) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hardy broke my wireless setup (using serial monkey's rt2570), I have attempted to resolve this issue using the gutsy solutions, however none of them have worked. Some how the device can pick up SSIDs. When I start and stop network manager, it fails to load up rausb0. I think it may have defaulted back to RT2500USB, because when I ran iwconfig, it shows it as rt2500usb, but I do not know where to change the rt25000, and I'm quite postive I blacklisted it in modprobe.d -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
rt73 works fine for me in Hardy. I got unknow symbol errors that was due to iwl3945 module, that was in conflict with rt2x00. This is not a trouble with rt2x00 itself. Explanation in bug #203758. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
as i've said, guys, the relevant line is Failed to select rate control algorithm it's unlikely that if it didn't work for me it would for you ;) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
@Stefan, there is something funky in your Makefiles, without wasting too much time I just hardcoded a couple of changes so that it would install and at least initialise (see attached patch). Apr 5 19:15:13 desktop kernel: [ 1987.808748] ACPI: PCI Interrupt :00:0e.0[A] - GSI 19 (level, low) - IRQ 19 Apr 5 19:15:13 desktop kernel: [ 1987.808755] PCI: Disallowing DAC for device :00:0e.0 Apr 5 19:15:13 desktop kernel: [ 1987.819500] phy0: Selected rate control algorithm 'pid' Apr 5 19:15:13 desktop kernel: [ 1987.881851] udev: renamed network interface wmaster0 to eth1 The bad news is that it still doesn't solve my wireless problem: Apr 5 19:17:50 desktop dhclient: There is already a pid file /var/run/dhclient.wlan0_rename.pid with pid 12743 Apr 5 19:17:50 desktop dhclient: killed old client process, removed PID file Apr 5 19:17:50 desktop dhclient: Internet Systems Consortium DHCP Client V3.0.6 Apr 5 19:17:50 desktop dhclient: Copyright 2004-2007 Internet Systems Consortium. Apr 5 19:17:50 desktop dhclient: All rights reserved. Apr 5 19:17:50 desktop dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Apr 5 19:17:50 desktop dhclient: Apr 5 19:17:50 desktop dhclient: eth1: unknown hardware address type 801 Apr 5 19:17:50 desktop dhclient: eth1: unknown hardware address type 801 Apr 5 19:17:50 desktop dhclient: Listening on LPF/wlan0_rename/00:11:2f:81:38:ea Apr 5 19:17:50 desktop dhclient: Sending on LPF/wlan0_rename/00:11:2f:81:38:ea Apr 5 19:17:50 desktop dhclient: Sending on Socket/fallback Apr 5 19:17:50 desktop dhclient: DHCPRELEASE on wlan0_rename to 192.168.1.1 port 67 Apr 5 19:17:50 desktop dhclient: send_packet: Network is unreachable Apr 5 19:17:50 desktop dhclient: send_packet: please consult README file regarding broadcast address. Apr 5 19:17:50 desktop avahi-autoipd(wlan0_rename)[12732]: Got SIGTERM, quitting. Apr 5 19:17:50 desktop avahi-autoipd(wlan0_rename)[12732]: Callout STOP, address 169.254.7.101 on interface wlan0_rename Apr 5 19:17:50 desktop avahi-autoipd(wlan0_rename)[12733]: client: RTNETLINK answers: Numerical result out of range Apr 5 19:17:50 desktop avahi-autoipd(wlan0_rename)[12733]: Script execution failed with return value 2 Apr 5 19:17:51 desktop kernel: [ 2060.636594] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready Apr 5 19:17:51 desktop kernel: [ 2060.638025] wlan0_rename: Initial auth_alg=0 Apr 5 19:17:51 desktop kernel: [ 2060.638028] wlan0_rename: authenticate with AP 00:18:39:90:ba:7c Apr 5 19:17:51 desktop kernel: [ 2060.652193] wlan0_rename: Initial auth_alg=0 Apr 5 19:17:51 desktop kernel: [ 2060.652197] wlan0_rename: authenticate with AP 00:18:39:90:ba:7c Apr 5 19:17:51 desktop dhclient: There is already a pid file /var/run/dhclient.wlan0_rename.pid with pid 0 Apr 5 19:17:51 desktop dhclient: Internet Systems Consortium DHCP Client V3.0.6 Apr 5 19:17:51 desktop dhclient: Copyright 2004-2007 Internet Systems Consortium. Apr 5 19:17:51 desktop dhclient: All rights reserved. Apr 5 19:17:51 desktop dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Apr 5 19:17:51 desktop dhclient: Apr 5 19:17:51 desktop dhclient: eth1: unknown hardware address type 801 Apr 5 19:17:51 desktop kernel: [ 2060.743280] wlan0_rename: authenticate with AP 00:18:39:90:ba:7c Apr 5 19:17:51 desktop kernel: [ 2060.835499] wlan0_rename: authenticate with AP 00:18:39:90:ba:7c Apr 5 19:17:51 desktop kernel: [ 2060.927719] wlan0_rename: authentication with AP 00:18:39:90:ba:7c timed out Apr 5 19:17:52 desktop dhclient: eth1: unknown hardware address type 801 Apr 5 19:17:52 desktop dhclient: Listening on LPF/wlan0_rename/00:11:2f:81:38:ea Apr 5 19:17:52 desktop dhclient: Sending on LPF/wlan0_rename/00:11:2f:81:38:ea Apr 5 19:17:52 desktop dhclient: Sending on Socket/fallback Apr 5 19:17:53 desktop dhclient: DHCPDISCOVER on wlan0_rename to 255.255.255.255 port 67 interval 4 Apr 5 19:17:57 desktop dhclient: DHCPDISCOVER on wlan0_rename to 255.255.255.255 port 67 interval 5 Apr 5 19:18:02 desktop dhclient: DHCPDISCOVER on wlan0_rename to 255.255.255.255 port 67 interval 13 Apr 5 19:18:15 desktop dhclient: DHCPDISCOVER on wlan0_rename to 255.255.255.255 port 67 interval 9 Apr 5 19:18:24 desktop dhclient: No DHCPOFFERS received. Apr 5 19:18:24 desktop dhclient: No working leases in persistent database - sleeping. ** Attachment added: Quick and dirty hack http://launchpadlibrarian.net/13136463/rt2x00.diff -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Ok, the kernel driver itself does not work. So an external version seems to be the only solution. I finally managed to (hopefully) solve the dependencies and have placed a tarball into http://people.ubuntu.com/~smb/rt2x00-test/ which does build on my machine and also provides modules I can load (but lacking the real hardware I could not do any real testing). To build the modules, unpack the tarball run make and make install. This will place the modules in the /lib/modules into updates. After depmod -ae an modprobe -l for the module should return the updates path. To boot with the modules an additional update-initramfs would be required. If anybody can give that a try and feedback, that would be much appreciated. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hopefully I tested it. I compiled the driver and it was present in /lib/modules/2.6.24-15-generic/updates. I did a sudo depmod -ae and sudo modprobe -l. Than a reboot. WLAN was broken after that, sudo iwconfig did not list the rt2500 pci Card anymore. I deleted rt2xx0 in ./updates and depmod + modprobe and did another reboot, and here I am again. Slow, but online ;) I can do another test, if you like to get a faster way to contact me, I am neversfelde on freenode, mostly online in #kubuntu-de.org or #kubuntu-devel. Jabber is [EMAIL PROTECTED] Thanks for your efforts. I am sure that Ralink will work again in Ubuntu :) -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Hi Stefan, I've got a few minutes so I booted back in 2.6.24-11 (yes, 11, I'm the one on a gutsy with hardy kernel, and at the moment really I'm running a very custom .25-rc7; btw I'm sure it doesn't make any difference) I'm afraid there is still a little problem I can't figure out how to fix myself, which prevents the driver to load successfully (so we still don't know if it will even work) dmesg reports a failure in initialization because it can't load rate algorhithm Apr 4 23:58:18 localhost kernel: [ 40.189338] phy0: Failed to select rate control algorithm Apr 4 23:58:18 localhost kernel: [ 40.189344] phy0: Failed to initialize rate control algorithm Apr 4 23:58:18 localhost kernel: [ 40.256640] phy0 - rt2x00lib_probe_dev: Error - Failed to initialize hw. Apr 4 23:58:18 localhost kernel: [ 40.256682] ACPI: PCI interrupt for device :00:06.0 disabled Apr 4 23:58:18 localhost kernel: [ 40.256695] rt61pci: probe of :00:06.0 failed with error -2 the directives i have in my working .config looks the same that you pass via config so I don't know where the problem might be, otherwise I would provide a patch I hope this helps -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
Sorry to report a negative but on my H/W (rt2500) this fails with: [ 31.651333] phy0 - rt2x00lib_probe_dev: Error - Failed to initialize hw. [ 31.651419] rt2500pci: probe of :00:0e.0 failed with error -2 *-network:1 description: Wireless interface product: RT2500 802.11g Cardbus/mini-PCI vendor: RaLink physical id: e bus info: [EMAIL PROTECTED]:00:0e.0 logical name: wmaster0 version: 01 serial: 00:11:2f:81:38:ea width: 32 bits clock: 33MHz -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I also tested the kernel at http://people.ubuntu.com/~smb/rt2x00-test/ with a D-Link DWL-G510 rev. c2 (rt61pci driver) and it didn't resolve any problems. I tested this on the latest hardy updates with NetworkManager. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I tested the kernel at http://people.ubuntu.com/~smb/rt2x00-test/ on my updated Hardy too. I have an ASUS WL-167G usb dongle (rt73usb) and it's not working. I'm not able to connect to any network, open or wpa-protected. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
The Hardy kernel uses the rt2x00 driver that is in the kernel upstream. There have been several fixes since 2.6.24 release and I got a test kernel with most of them at: http://people.ubuntu.com/~smb/rt2x00-test/ There is a chance this patchset might make it into the final Hardy release but we need feedback, whether this is an improvement. So please, any volunteers to try this are welcome. @IvD As far as I can tell the version in Linus tree is 2.0.14. I am not expert in that field but it seems the more recent driver cannot be built easily for the Hardy kernel since it uses quite a lot mac80211 functionality that isn't in Hardy. A solution would be to put the advanced driver into linux-backport-modules. But this requires a codebase that can be compiled and used with the current Hardy code. But this requires more time (and knowledge) than I have. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
What might be interesting is the wireless-compat package on linuxwireless.org. They provide the latest mac80211 versions including all mac80211 drivers for older kernels. Unfortunately the patch that fixed above problems was not a single patch, in fact it were about 80 patches that fixed most issues. And that makes backporting the fix too complex. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
I tested the Kernel on http://people.ubuntu.com/~smb/rt2x00-test/ with Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01). None of my problems is resolved. The connection ist very slow and unstable. I can speed it up with iwconfig wlan0 rate 54M, without setting the rate manual it is Bit Rate=1 Mb/s, it is faster than, but not stable. I do not know how to give a better feedback, so please tell me, if you need more information. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 134660] Re: Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy
if you people here want to solve your problems with rt61pci, the only fix i found was to compile 2.6.25-rc7; at least there it's fixed On Tue, Apr 1, 2008 at 11:33 PM, Christian Mangold [EMAIL PROTECTED] wrote: I tested the Kernel on http://people.ubuntu.com/~smb/rt2x00-test/ with Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01). None of my problems is resolved. The connection ist very slow and unstable. I can speed it up with iwconfig wlan0 rate 54M, without setting the rate manual it is Bit Rate=1 Mb/s, it is faster than, but not stable. I do not know how to give a better feedback, so please tell me, if you need more information. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a direct subscriber of the bug. -- Ralink rt2400 / rt2500 / rt2570 / rt61 / rt73 do not work out of the box in Gutsy/Hardy https://bugs.launchpad.net/bugs/134660 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs