Public bug reported: The following issue has started since upgrade from feisty to gutsy gibbon:
After GRUB, the screen goes black and nothing shows up. The harddisk seems to be active, so i assume it's booting. But nothing will show up, this black screen stays. The workaround i've found is to use ALT-F1 to go to console 1, which shows up immediately. Then by pressing ALT-F7 the gdm login screen shows up within ~3 sec. This also confirms my assumption that it does boot in the background. From the gdm login screen, everything seems to work correct. I'm using a Sony Vaio VGN-A115Z notebook, dmesg output: [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff40000 (usable) [ 0.000000] BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130880) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130880 [ 0.000000] HighMem 130880 -> 130880 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130880 [ 0.000000] On node 0 totalpages: 130880 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125794 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F53F0 checksum 0 [ 0.000000] ACPI: RSDP 000F53F0, 0014 (r0 SONY ) [ 0.000000] ACPI: RSDT 1FF40000, 002C (r1 SONY F1 20040928 MSFT 97) [ 0.000000] ACPI: FACP 1FF40200, 0084 (r2 SONY F1 20040928 MSFT 97) [ 0.000000] ACPI: DSDT 1FF40500, 3B58 (r1 SONY F1 20040928 MSFT 100000D) [ 0.000000] ACPI: FACS 1FF50000, 0040 [ 0.000000] ACPI: OEMB 1FF50040, 0053 (r1 SONY F1 20040928 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) [ 0.000000] Built 1 zonelists. Total pages: 129858 [ 0.000000] Kernel command line: root=UUID=0b16a8a7-ec30-4517-9c59-d62d3fb05dfc ro quiet splash [ 0.000000] Found and enabled local APIC! [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1594.836 MHz processor. [ 6.876835] Console: colour VGA+ 80x25 [ 6.877142] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 6.877447] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 6.892563] Memory: 507276k/523520k available (2015k kernel code, 15716k reserved, 916k data, 364k init, 0k highmem) [ 6.892573] virtual kernel memory layout: [ 6.892575] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 6.892576] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 6.892578] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 6.892579] lowmem : 0xc0000000 - 0xdff40000 ( 511 MB) [ 6.892580] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 6.892582] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 6.892583] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 6.892587] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 6.892629] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 6.972645] Calibrating delay using timer specific routine.. 3191.97 BogoMIPS (lpj=6383941) [ 6.972674] Security Framework v1.0.0 initialized [ 6.972682] SELinux: Disabled at boot. [ 6.972697] Mount-cache hash table entries: 512 [ 6.972832] CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000 [ 6.972844] CPU: L1 I cache: 32K, L1 D cache: 32K [ 6.972847] CPU: L2 cache: 2048K [ 6.972851] CPU: After all inits, caps: afe9fbbf 00000000 00000000 00002040 00000180 00000000 00000000 [ 6.972861] Compat vDSO mapped to ffffe000. [ 6.972873] Checking 'hlt' instruction... OK. [ 6.988751] SMP alternatives: switching to UP code [ 6.988953] Freeing SMP alternatives: 11k freed [ 6.989226] Early unpacking initramfs... done [ 7.366960] ACPI: Core revision 20070126 [ 7.367024] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 7.369280] ACPI: setting ELCR to 0200 (from 02b8) [ 7.371224] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 [ 7.371230] SMP motherboard not detected. [ 7.476666] Brought up 1 CPUs [ 7.476781] Booting paravirtualized kernel on bare hardware [ 7.476845] Time: 6:38:29 Date: 09/19/107 [ 7.476868] NET: Registered protocol family 16 [ 7.476948] EISA bus registered [ 7.476961] ACPI: bus type pci registered [ 7.478126] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 7.478128] PCI: Using configuration type 1 [ 7.478130] Setting up standard PCI resources [ 7.480489] ACPI: EC: Look up EC in DSDT [ 7.480699] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 7.482670] ACPI: Interpreter enabled [ 7.482673] ACPI: (supports S0 S3 S4 S5) [ 7.482693] ACPI: Using PIC for interrupt routing [ 7.488600] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 7.488646] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 7.488660] PCI: Probing PCI hardware (bus 00) [ 7.489018] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 7.489022] PCI quirk: region 0500-053f claimed by ICH4 GPIO [ 7.489637] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling [ 7.489697] PCI: Transparent bridge - 0000:00:1e.0 [ 7.489766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 7.489907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 7.489991] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 7.492215] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9) [ 7.492384] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9) [ 7.492550] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9) [ 7.492743] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9) [ 7.492909] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9) [ 7.493074] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9) *0, disabled. [ 7.493239] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9) [ 7.493405] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9) [ 7.493522] Linux Plug and Play Support v0.97 (c) Adam Belay [ 7.493532] pnp: PnP ACPI init [ 7.493539] ACPI: bus type pnp registered [ 7.495545] pnp: PnP ACPI: found 11 devices [ 7.495548] ACPI: ACPI bus type pnp unregistered [ 7.495551] PnPBIOS: Disabled by ACPI PNP [ 7.495594] PCI: Using ACPI for IRQ routing [ 7.495597] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 7.501018] NET: Registered protocol family 8 [ 7.501020] NET: Registered protocol family 20 [ 7.501075] pnp: 00:08: iomem range 0xff800000-0xffbfffff has been reserved [ 7.501079] pnp: 00:08: iomem range 0xffc00000-0xffffffff has been reserved [ 7.501084] pnp: 00:09: ioport range 0x400-0x47f has been reserved [ 7.501087] pnp: 00:09: ioport range 0x500-0x53f has been reserved [ 7.501090] pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 7.501094] pnp: 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 7.504631] Time: tsc clocksource has been installed. [ 7.531365] PCI: Bridge: 0000:00:01.0 [ 7.531368] IO window: c000-cfff [ 7.531372] MEM window: ff500000-ff5fffff [ 7.531375] PREFETCH window: ce900000-de9fffff [ 7.531385] PCI: Bus 3, cardbus bridge: 0000:02:01.0 [ 7.531387] IO window: 0000d000-0000d0ff [ 7.531391] IO window: 0000d400-0000d4ff [ 7.531395] PREFETCH window: 34000000-37ffffff [ 7.531399] MEM window: 38000000-3bffffff [ 7.531403] PCI: Bridge: 0000:00:1e.0 [ 7.531406] IO window: d000-dfff [ 7.531411] MEM window: ff600000-ff6fffff [ 7.531416] PREFETCH window: dea00000-deafffff [ 7.531430] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 7.531656] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 [ 7.531659] PCI: setting IRQ 9 as level-triggered [ 7.531662] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 7.531679] NET: Registered protocol family 2 [ 7.568658] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 7.568695] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 7.568852] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 7.568965] TCP: Hash tables configured (established 16384 bind 16384) [ 7.568967] TCP reno registered [ 7.580739] checking if image is initramfs... it is [ 8.032608] Switched to high resolution mode on CPU 0 [ 8.324300] Freeing initrd memory: 7346k freed [ 8.324741] audit: initializing netlink socket (disabled) [ 8.324758] audit(1192775909.008:1): initialized [ 8.326726] VFS: Disk quotas dquot_6.5.1 [ 8.326777] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.326878] io scheduler noop registered [ 8.326881] io scheduler anticipatory registered [ 8.326883] io scheduler deadline registered [ 8.326899] io scheduler cfq registered (default) [ 8.326972] Boot video device is 0000:01:00.0 [ 8.327157] isapnp: Scanning for PnP cards... [ 8.680994] isapnp: No Plug & Play device found [ 8.706687] Real Time Clock Driver v1.12ac [ 8.706816] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 8.707790] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 8.707794] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 8.707805] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 8.708370] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 8.708622] input: Macintosh mouse button emulation as /class/input/input0 [ 8.708699] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 8.711482] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.711488] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.711644] mice: PS/2 mouse device common for all mice [ 8.711745] EISA: Probing bus 0 at eisa.0 [ 8.711783] EISA: Detected 0 cards. [ 8.711892] TCP cubic registered [ 8.711909] NET: Registered protocol family 1 [ 8.711964] Testing NMI watchdog ... OK. [ 8.791385] Using IPI No-Shortcut mode [ 8.791579] Magic number: 11:666:620 [ 8.791644] hash matches device ptybd [ 8.792000] Freeing unused kernel memory: 364k freed [ 8.867875] input: AT Translated Set 2 keyboard as /class/input/input1 [ 9.978929] AppArmor: AppArmor initialized<5>audit(1192775910.508:2): type=1505 info="AppArmor initialized" pid=1196 [ 10.102895] fuse init (API version 7.8) [ 10.203107] Failure registering capabilities with primary security module. [ 10.508212] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 10.508217] ACPI: Processor [CPU1] (supports 8 throttling states) [ 12.107931] ACPI: Thermal Zone [ATF0] (36 C) [ 21.426435] usbcore: registered new interface driver usbfs [ 21.426461] usbcore: registered new interface driver hub [ 21.426483] usbcore: registered new device driver usb [ 21.427273] USB Universal Host Controller Interface driver v3.0 [ 21.427629] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 [ 21.427632] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 21.427645] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.427649] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.427870] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 21.427892] uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000e800 [ 21.427999] usb usb1: configuration #1 chosen from 1 choice [ 21.428025] hub 1-0:1.0: USB hub found [ 21.428030] hub 1-0:1.0: 2 ports detected [ 21.530646] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4 [ 21.530651] PCI: setting IRQ 4 as level-triggered [ 21.530655] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 4 (level, low) -> IRQ 4 [ 21.530667] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.530671] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.530697] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 21.530722] uhci_hcd 0000:00:1d.1: irq 4, io base 0x0000e880 [ 21.530819] usb usb2: configuration #1 chosen from 1 choice [ 21.530844] hub 2-0:1.0: USB hub found [ 21.530850] hub 2-0:1.0: 2 ports detected [ 21.634581] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7 [ 21.634585] PCI: setting IRQ 7 as level-triggered [ 21.634588] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7 [ 21.634598] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.634602] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.634623] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 21.634646] uhci_hcd 0000:00:1d.2: irq 7, io base 0x0000ec00 [ 21.634733] usb usb3: configuration #1 chosen from 1 choice [ 21.634758] hub 3-0:1.0: USB hub found [ 21.634763] hub 3-0:1.0: 2 ports detected [ 21.872723] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3 [ 21.872728] PCI: setting IRQ 3 as level-triggered [ 21.872732] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 21.872746] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.872750] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.872784] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 21.872814] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.872821] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.872831] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xff7ffc00 [ 21.876726] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.876821] usb usb4: configuration #1 chosen from 1 choice [ 21.876849] hub 4-0:1.0: USB hub found [ 21.876855] hub 4-0:1.0: 6 ports detected [ 21.978294] ACPI: PCI Interrupt 0000:02:04.2[C] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7 [ 21.978306] ehci_hcd 0000:02:04.2: EHCI Host Controller [ 21.978331] ehci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5 [ 22.002176] ehci_hcd 0000:02:04.2: irq 7, io mem 0xff6fe400 [ 22.002184] ehci_hcd 0000:02:04.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 22.002259] usb usb5: configuration #1 chosen from 1 choice [ 22.002283] hub 5-0:1.0: USB hub found [ 22.002288] hub 5-0:1.0: 5 ports detected [ 22.324175] SCSI subsystem initialized [ 22.329696] libata version 2.21 loaded. [ 22.331282] ata_piix 0000:00:1f.1: version 2.11 [ 22.331298] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 22.331309] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7 [ 22.331346] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 22.331419] scsi0 : ata_piix [ 22.331460] scsi1 : ata_piix [ 22.331546] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14 [ 22.331549] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15 [ 22.494550] ata1.00: ATA-5: HITACHI_DK23FA-60, 00M4A0A2, max UDMA/100 [ 22.494555] ata1.00: 117210240 sectors, multi 16: LBA [ 22.496936] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 22.510511] ata1.00: configured for UDMA/100 [ 22.516918] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI [ 22.516921] e100: Copyright(c) 1999-2006 Intel Corporation [ 22.986362] ata2.00: ATAPI: MATSHITAUJ-820D, 1.01, max UDMA/33 [ 23.158319] ata2.00: configured for UDMA/33 [ 23.165996] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-6 00M4 PQ: 0 ANSI: 5 [ 23.167824] scsi 1:0:0:0: CD-ROM MATSHITA UJ-820D 1.01 PQ: 0 ANSI: 5 [ 23.169763] ACPI: PCI Interrupt 0000:02:01.2[C] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3 [ 23.222614] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[ff6fe800-ff6fefff] Max Packet=[2048] IR/IT contexts=[4/8] [ 23.222733] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 [ 23.222744] ohci_hcd 0000:02:04.0: OHCI Host Controller [ 23.222774] ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 6 [ 23.222788] ohci_hcd 0000:02:04.0: irq 9, io mem 0xff6f7000 [ 23.307866] usb usb6: configuration #1 chosen from 1 choice [ 23.307897] hub 6-0:1.0: USB hub found [ 23.307906] hub 6-0:1.0: 3 ports detected [ 23.410040] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 23.410057] ohci_hcd 0000:02:04.1: OHCI Host Controller [ 23.410080] ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 7 [ 23.410095] ohci_hcd 0000:02:04.1: irq 9, io mem 0xff6fc000 [ 23.496001] usb usb7: configuration #1 chosen from 1 choice [ 23.496028] hub 7-0:1.0: USB hub found [ 23.496035] hub 7-0:1.0: 2 ports detected [ 23.598357] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 [ 23.598362] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 23.638538] e100: eth0: e100_probe: addr 0xff6f6000, irq 9, MAC addr 08:00:46:DA:CD:9A [ 23.857883] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 23.861871] usb 6-2: new full speed USB device using ohci_hcd and address 2 [ 23.861886] sd 0:0:0:0: [sda] Write Protect is off [ 23.861888] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.868931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.869930] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) [ 23.870922] sd 0:0:0:0: [sda] Write Protect is off [ 23.870925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 23.877857] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 23.877861] sda:<6>usb 6-2: configuration #1 chosen from 1 choice [ 24.284018] sda1 sda2 sda3 < sda5 sda6 > sda4 [ 24.327090] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.333955] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 24.333959] Uniform CD-ROM driver Revision: 3.20 [ 24.334096] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 24.338058] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 24.338077] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 24.493857] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301a63ff4] [ 25.664509] Attempting manual resume [ 25.664513] swsusp: Resume From Partition 8:6 [ 25.664515] PM: Checking swsusp image. [ 25.761535] PM: Resume from disk failed. [ 26.469454] kjournald starting. Commit interval 5 seconds [ 26.469462] EXT3-fs: mounted filesystem with ordered data mode. [ 119.993644] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 120.022301] Linux agpgart interface v0.102 (c) Dave Jones [ 120.026840] agpgart: Detected an Intel 855PM Chipset. [ 120.057971] iTCO_vendor_support: vendor-support=0 [ 120.058936] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 120.058995] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 120.059005] iTCO_wdt: No card detected [ 120.080020] intel_rng: FWH not detected [ 120.117584] agpgart: AGP aperture is 256M @ 0xe0000000 [ 120.117855] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 121.320928] Yenta: CardBus bridge found at 0000:02:01.0 [104d:818f] [ 121.320944] Yenta: Enabling burst memory read transactions [ 121.320948] Yenta: Using CSCINT to route CSC interrupts to PCI [ 121.320951] Yenta: Routing CardBus interrupts to PCI [ 121.320955] Yenta TI: socket 0000:02:01.0, mfunc 0x01001b22, devctl 0x64 [ 121.487102] ieee80211_crypt: registered algorithm 'NULL' [ 121.490100] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 121.490103] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 121.549777] Yenta: ISA IRQ mask 0x0c60, PCI irq 9 [ 121.549782] Socket status: 30000006 [ 121.549785] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 121.549792] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff [ 121.549796] cs: IO port probe 0xd000-0xdfff: clean. [ 121.550123] pcmcia: parent PCI bridge Memory window: 0xff600000 - 0xff6fffff [ 121.550126] pcmcia: parent PCI bridge Memory window: 0xdea00000 - 0xdeafffff [ 121.550627] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 [ 121.550630] PCI: setting IRQ 5 as level-triggered [ 121.550634] ACPI: PCI Interrupt 0000:02:01.3[B] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5 [ 121.559321] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq [ 121.559326] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 121.559417] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7 [ 121.559442] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 121.573300] tifm_core: MMC/SD card detected in socket 0:0 [ 121.770580] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 122.440931] input: PS/2 Mouse as /class/input/input2 [ 122.456594] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3 [ 122.573336] input: PC Speaker as /class/input/input4 [ 123.054902] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 123.054923] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 123.880906] intel8x0_measure_ac97_clock: measured 55415 usecs [ 123.880910] intel8x0: clocking to 48000 [ 123.943761] cs: IO port probe 0x100-0x3af: clean. [ 123.945561] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 123.945978] cs: IO port probe 0x820-0x8ff: clean. [ 123.946595] cs: IO port probe 0xc00-0xcf7: clean. [ 123.947340] cs: IO port probe 0xa00-0xaff: clean. [ 123.964870] Bluetooth: Core ver 2.11 [ 123.964933] NET: Registered protocol family 31 [ 123.964935] Bluetooth: HCI device and connection manager initialized [ 123.964938] Bluetooth: HCI socket layer initialized [ 123.979699] Bluetooth: HCI USB driver ver 2.9 [ 123.982674] usbcore: registered new interface driver hci_usb [ 124.643547] NET: Registered protocol family 10 [ 124.643660] lo: Disabled Privacy Extensions [ 124.643718] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 125.554380] lp: driver loaded but no devices found [ 125.662929] Adding 522072k swap on /dev/sda6. Priority:-1 extents:1 across:522072k [ 127.579804] EXT3 FS on sda2, internal journal [ 131.435634] kjournald starting. Commit interval 5 seconds [ 131.535599] EXT3 FS on sda5, internal journal [ 131.535604] EXT3-fs: mounted filesystem with ordered data mode. [ 132.035525] kjournald starting. Commit interval 5 seconds [ 132.135501] EXT3 FS on sda4, internal journal [ 132.135505] EXT3-fs: mounted filesystem with ordered data mode. [ 138.516619] No dock devices found. [ 139.330332] ACPI: AC Adapter [ACAD] (on-line) [ 139.548533] Asus Laptop ACPI Extras version 0.30 [ 139.548665] unsupported model SE, trying default values [ 139.548667] send /proc/acpi/dsdt to the developers [ 140.218288] input: Power Button (CM) as /class/input/input5 [ 140.221610] ACPI: Power Button (CM) [PWRB] [ 140.263373] input: Lid Switch as /class/input/input6 [ 140.266583] ACPI: Lid Switch [LID] [ 141.885971] ACPI: Battery Slot [BAT1] (battery present) [ 149.969714] apm: BIOS not found. [ 150.074331] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 150.486797] sonypi: Sony Programmable I/O Controller Driver v1.26. [ 150.487992] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers [ 150.489340] sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on [ 150.489346] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084 [ 150.489348] sonypi: device allocated minor is 63 [ 150.531584] input: Sony Vaio Jogdial as /class/input/input7 [ 150.580346] input: Sony Vaio Keys as /class/input/input8 [ 151.059924] sony-laptop: Sony Notebook Control Driver v0.5. [ 151.060425] input: Sony Vaio Keys as /class/input/input9 [ 151.060913] input: Sony Vaio Jogdial as /class/input/input10 [ 151.799006] Failure registering capabilities with primary security module. [ 145.368000] Marking TSC unstable due to: possible TSC halt in C2. [ 145.372000] Time: acpi_pm clocksource has been installed. [ 146.032000] Clocksource tsc unstable (delta = -260229140 ns) [ 146.108000] Asus ACPI: LED (WLED) write failed [ 146.836000] NET: Registered protocol family 17 [ 146.860000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 146.940000] ieee80211_crypt: registered algorithm 'TKIP' [ 146.960000] [drm] Initialized drm 1.1.0 20060810 [ 146.972000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9 [ 146.972000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 149.380000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 149.380000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 149.380000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 150.188000] [drm] Setting GART location based on new memory map [ 150.188000] [drm] Loading R200 Microcode [ 150.188000] [drm] writeback test succeeded in 2 usecs [ 157.568000] eth1: no IPv6 routers present ** Affects: ubuntu Importance: Undecided Status: New -- login screen fails to show https://bugs.launchpad.net/bugs/154181 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
