[Bug 1688632] Re: nplan 0.23 update
This bug was fixed in the package nplan - 0.23~16.10.1 --- nplan (0.23~16.10.1) yakkety; urgency=medium * Backport netplan 0.23 to 16.10. (LP: #1688632) nplan (0.23) artful; urgency=medium * Do not unbind brcmfmac, interface will be gone. (LP: #1696162) nplan (0.22) artful; urgency=medium * Add support for setting a custom MAC address on all device types. (LP: #1690388) * Improved MAC/vlan integration tests; thanks for Dimitri John Ledkov for the changes. nplan (0.21) artful; urgency=medium [ Ryan Harper ] * Add support for setting MTU on a device. (LP: #1668693) [ Mathieu Trudel-Lapierre ] * Don't rebind Atheros AR9271; it would confuse the driver. (LP: #1672740) * debian/control: Add Conflicts: against netplan; the network 'plan' daemon. Both ship the same /usr/sbin/netplan. (LP: #1665842) nplan (0.20) zesty; urgency=medium * tests/integration.py: increase timeout for integration tests (networkd and NetworkManager "wait-online" checks) to account for longer bring-up times when dealing with stacked virtual devices. nplan (0.19) zesty; urgency=medium * Add support for unordered definition of network devices: you can now specify a virtual devices before their member devices. (LP: #1670495) * Allow setting up the STP state for a bridge. (LP: #1665088) * Document bond/bridge parameters support. (LP: #1664702) nplan (0.18) zesty; urgency=medium * debian/tests/integration.py: in some cases 'iw reg get' may qualify the reg domain results with 'global'; we must not let that trip up tests when they are run on Ubuntu infrastructure vs. local tests. nplan (0.17) zesty; urgency=medium * New release: - Add support for configuring bonds. - Add support for configuring bridges. nplan (0.16) zesty; urgency=medium [ Martin Pitt ] * doc/example-config: Adjust "routes:" example. It does not make sense to make "routes:" a global thing, they should be tied to an interface so that the route is only set when the corresponding interface exists and is up, and the config is not split in two parts. * doc/netplan.md: Point out that NM does not support globbing (LP: #1631018) [ Mathieu Trudel-Lapierre ] * Fix coverage for src/netplan to be 100%, and fail if coverage falls below that mark again. * Add support for specifying routes. nplan (0.15) zesty; urgency=medium * tests/generate.py: Fix PEP-8 error (newly detected by -proposed pycodestyle). nplan (0.14) zesty; urgency=medium * tests/generate.py: Introduce macros for commonly expected networkd output * networkd: Use NetworkManager compatible DHCP route metrics (LP: #1639754) * doc/netplan.md: Fix wrong wifi reference in "br0" example * doc/netplan.md: Clarify introduction * tests/integration.py: Fix race condition with waiting for networkd nplan (0.13) zesty; urgency=medium [ Jonathan Cave ] * Blacklist mwifiex_pcie from rebinds (work around LP: #1630285) [ Martin Pitt ] * Add support for nameservers (LP: #1626617) -- Mathieu Trudel-LapierreTue, 06 Jun 2017 17:25:57 -0700 ** Changed in: nplan (Ubuntu Yakkety) Status: Fix Committed => Fix Released ** Changed in: nplan (Ubuntu Zesty) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
This bug was fixed in the package nplan - 0.23~17.04.1 --- nplan (0.23~17.04.1) zesty; urgency=medium * Backport netplan 0.23 to 17.04. (LP: #1688632) nplan (0.23) artful; urgency=medium * Do not unbind brcmfmac, interface will be gone. (LP: #1696162) nplan (0.22) artful; urgency=medium * Add support for setting a custom MAC address on all device types. (LP: #1690388) * Improved MAC/vlan integration tests; thanks for Dimitri John Ledkov for the changes. nplan (0.21) artful; urgency=medium [ Ryan Harper ] * Add support for setting MTU on a device. (LP: #1668693) [ Mathieu Trudel-Lapierre ] * Don't rebind Atheros AR9271; it would confuse the driver. (LP: #1672740) * debian/control: Add Conflicts: against netplan; the network 'plan' daemon. Both ship the same /usr/sbin/netplan. (LP: #1665842) -- Mathieu Trudel-LapierreTue, 06 Jun 2017 17:40:10 -0700 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
This bug was fixed in the package nplan - 0.23~16.04.1 --- nplan (0.23~16.04.1) xenial; urgency=medium * Backport netplan 0.23 to 16.04. (LP: #1688632) nplan (0.23) artful; urgency=medium * Do not unbind brcmfmac, interface will be gone. (LP: #1696162) nplan (0.22) artful; urgency=medium * Add support for setting a custom MAC address on all device types. (LP: #1690388) * Improved MAC/vlan integration tests; thanks for Dimitri John Ledkov for the changes. nplan (0.21) artful; urgency=medium [ Ryan Harper ] * Add support for setting MTU on a device. (LP: #1668693) [ Mathieu Trudel-Lapierre ] * Don't rebind Atheros AR9271; it would confuse the driver. (LP: #1672740) * debian/control: Add Conflicts: against netplan; the network 'plan' daemon. Both ship the same /usr/sbin/netplan. (LP: #1665842) nplan (0.20) zesty; urgency=medium * tests/integration.py: increase timeout for integration tests (networkd and NetworkManager "wait-online" checks) to account for longer bring-up times when dealing with stacked virtual devices. nplan (0.19) zesty; urgency=medium * Add support for unordered definition of network devices: you can now specify a virtual devices before their member devices. (LP: #1670495) * Allow setting up the STP state for a bridge. (LP: #1665088) * Document bond/bridge parameters support. (LP: #1664702) nplan (0.18) zesty; urgency=medium * debian/tests/integration.py: in some cases 'iw reg get' may qualify the reg domain results with 'global'; we must not let that trip up tests when they are run on Ubuntu infrastructure vs. local tests. nplan (0.17) zesty; urgency=medium * New release: - Add support for configuring bonds. - Add support for configuring bridges. nplan (0.16) zesty; urgency=medium [ Martin Pitt ] * doc/example-config: Adjust "routes:" example. It does not make sense to make "routes:" a global thing, they should be tied to an interface so that the route is only set when the corresponding interface exists and is up, and the config is not split in two parts. * doc/netplan.md: Point out that NM does not support globbing (LP: #1631018) [ Mathieu Trudel-Lapierre ] * Fix coverage for src/netplan to be 100%, and fail if coverage falls below that mark again. * Add support for specifying routes. nplan (0.15) zesty; urgency=medium * tests/generate.py: Fix PEP-8 error (newly detected by -proposed pycodestyle). -- Mathieu Trudel-LapierreTue, 06 Jun 2017 17:19:10 -0700 ** Changed in: nplan (Ubuntu Xenial) Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
Verification-done on xenial, yakkety and zesty: I have verified that using nplan 0.23~, configuration installed on a machine works as expected: simple configurations works, pre-existing configuration (there were none, but this was approximated using existing integration tests from nplan adapted to the test environment in a live network), and complex configurations work -- bonds and bridges, setting MTU, unbind workarounds, vlan. ** Tags removed: verification-needed ** Tags added: verification-done-xenial verification-done-yakkety verification-done-zesty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
Hello Mathieu, or anyone else affected, Accepted nplan into yakkety-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.23~16.10.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: nplan (Ubuntu Yakkety) Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
Hello Mathieu, or anyone else affected, Accepted nplan into zesty-proposed. The package will build now and be available at https://launchpad.net/ubuntu/+source/nplan/0.23~17.04.1 in a few hours, and then in the -proposed repository. Please help us by testing this new package. See https://wiki.ubuntu.com/Testing/EnableProposed for documentation on how to enable and use -proposed.Your feedback will aid us getting this update out to other Ubuntu users. If this package fixes the bug for you, please add a comment to this bug, mentioning the version of the package you tested, and change the tag from verification-needed to verification-done. If it does not fix the bug for you, please add a comment stating that, and change the tag to verification-failed. In either case, details of your testing will help us make a better decision. Further information regarding the verification process can be found at https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in advance! ** Changed in: nplan (Ubuntu Zesty) Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
** Description changed: [Impact] Nplan has been in active development and includes important bug fixes and critical features for users. [Test case] - Run nplan integration tests on the release - Validate that netplan generate && netplan apply alone, without config, behave as expected (no result) - Validate that netplan generate && netplan apply with minimal config writes /run/NetworkManager/conf.d/10-globally-managed-devices.conf - Validate that netplan generate && netplan apply works with any existing configuation. [Regression potential] - Any failure to work with existing configuration should be considered a regression. Any new failure of the test suite would be a regression. + Existing configurations should remain working with no changes. Possible regressions might include failing to properly set routes for devices, or applying custom configuration for bridge on bond devices. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1688632] Re: nplan 0.23 update
** Summary changed: - nplan 0.21 update + nplan 0.23 update -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1688632 Title: nplan 0.23 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1688632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs