[Bug 1876259] Re: bcm2835-codec module is missing
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Bug 1876259] Re: bcm2835-codec module is missing
This bug was fixed in the package linux-raspi - 5.4.0-1015.15 --- linux-raspi (5.4.0-1015.15) focal; urgency=medium * focal/linux-raspi: 5.4.0-1015.15 -proposed tracker (LP: #1887056) [ Ubuntu: 5.4.0-42.46 ] * focal/linux: 5.4.0-42.46 -proposed tracker (LP: #1887069) * linux 4.15.0-109-generic network DoS regression vs -108 (LP: #1886668) - SAUCE: Revert "netprio_cgroup: Fix unlimited memory leak of v2 cgroups" linux-raspi (5.4.0-1014.14) focal; urgency=medium * focal/linux-raspi: 5.4.0-1014.14 -proposed tracker (LP: #1885841) * Add crda dependency (LP: #1877415) - [Packaging] raspi: Depend on crda * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454) - SAUCE: arm: dts: Add 'brcm, bcm2835-pl011' for compatible for uart2-5 * aarch64 kernel module for exfat not in raspberry pi 4 build (LP: #1880503) - [Config] raspi: Set EXFAT_FS=m * Enable ZFS for Raspberry Pi arm64 (LP: #1884110) - [Config] raspi: Enable zfs modules for arm64 * focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10 (LP: #1882930) - Revert "net: bcmgenet: Workaround for Pi 4B network issue" - Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" - gpiolib: Don't prevent IRQ usage of output GPIOs - drm/vc4: Fix HDMI mode validation - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks - bcm2835-dma: Add proper 40-bit DMA support - overlays: tc358743: Use intra-overlay fragments - overlays: Move "fixed-clock" nodes to the root - raspberrypi: dts: Switch to discrete ALSA devices - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding - dtoverlays: Add IMX477 sensor overlay - media: i2c: Add driver for Sony IMX477 sensor - media: i2c: imx477: Add support for adaptive frame control - configs: Add imx477 sensor driver to all Raspberry Pi defconfigs - udmabuf: Remove deleted map/unmap handlers. - udmabuf: use cache_sgt_mapping option - udmabuf: add a pointer to the miscdevice in dma-buf private data - udmabuf: separate out creating/destroying scatter-table - udmabuf: implement begin_cpu_access/end_cpu_access hooks - udmabuf: fix dma-buf cpu access - dma-buf: Add dma-buf heaps framework - dma-buf: heaps: Add heap helpers - dma-buf: heaps: Add system heap to dmabuf heaps - dma-buf: heaps: Add CMA heap to dmabuf heaps - kselftests: Add dma-heap test - dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier - dma-buf: heaps: Remove redundant heap identifier from system heap name - dma-buf: fix resource leak on -ENOTTY error return path - dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static - defconfig: Add CMA and system dma-heaps to the config - ARM: dts: Enable firmware-clocks on all Pis - configs: Include the firmware-clocks driver - configs: Use the upstream cpufreq driver - media: bcm2835-unicam: Always service interrupts - sc16is7xx: Fix for hardware flow control - drm/vc4: Fix VIC usage with Broadcast RGB - staging: vc04_services: mmal-vchiq: Update parameters list - staging:vc04_services: bcm2835-codec: Request headers with I-frame - staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers - staging:vc04_services: bcm2835-camera: Request headers with I-frame - configs: Restore missing NF_TABLES settings - overlays: Fix audio parameter of vc4-kms-v3d - Switch to snd_soc_dai_set_bclk_ratio - media: bcm2835-unicam: Retain packing information on G_FMT - zswap: Defer zswap initialisation - configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m - drm/vc4: Adopt the dma configuration from the HVS or V3D component - drm/vc4: Add FKMS as an acceptable node for dma ranges. - media: i2c: imx477: Return correct result on sensor id verification - staging: vchiq_arm: Clean up 40-bit DMA support - ARM: dts: Update for new VCHIQ BCM2711 DMA support - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - dt-bindings: Add Broadcom AVS RO thermal - thermal: Add BCM2711 thermal driver - ARM: dts: bcm2711: Enable thermal - ARM: configs: Build BCM2711 thermal as module - Revert "thermal: brcmstb_thermal: Correct SoC name" - Revert "thermal: brcmstb_thermal: Add BCM2838 support" - ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node - configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL - configs: Build HWMON core into kernel - brcmfmac: BCM43436 needs dedicated firmware - overlays: i2c-rtc: Fix trickle-resistor-ohms param - overlays: gpio-shutdown: Add information for SysV init / inittab - overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 - overlays: Add spi0 overlay to support sc16is752 - net: rtl8192cu: fix gcc misleading whitespace warning - overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param - media: bcm2835-isp: fix bytes per
[Bug 1876259] Re: bcm2835-codec module is missing
** Changed in: linux-raspi (Ubuntu Focal) Status: Confirmed => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
** Description changed: - the bcm2835-codec module is not present in 5.4.0-1008-raspi (64bit) and + [Impact] + + HW GPU support is non-functional. + + [Test Case] + + Check for /dev/dri/render*. + + [Fix] + + Add bcm2835-codec. + + [Regression Potential[ + + Low, we're just building a new driver. + + [Original Bug Report] + + The bcm2835-codec module is not present in 5.4.0-1008-raspi (64bit) and appears to not be enabled in 1009 either. as a result hardware video decoding/encoding via v4l2 is not possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
>From what I understood, all of the classic hardware codec options require the MMAL userspace library, which currently cannot be built for 64bit. The only option for hardware encoding/decoding is the V4L2 m2m interface, which in turn requires the `bcm2835_codec` module we are missing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux-raspi (Ubuntu Focal) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
** Also affects: linux-raspi (Ubuntu Focal) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux-raspi (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1876259] Re: bcm2835-codec module is missing
** Description changed: - the bcm2835-codec module is not present in 5.4.0-1008-raspi and appears - to not be enabled in 1009 either. as a result hardware video + the bcm2835-codec module is not present in 5.4.0-1008-raspi (64bit) and + appears to not be enabled in 1009 either. as a result hardware video decoding/encoding via v4l2 is not possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1876259 Title: bcm2835-codec module is missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1876259/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
