[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. I also encountered a similar error when trying to use the livecd. After unsuccessfully trying to load up, I am sent to the terminal with an error code Output DVI-I_2/analog enabled but has no modes The only way of viewing the livecd or a proper installation was to go into low graphics mode (vesa) If I go into display settings, it comes up with Monitor: Unknown and a refresh rate of 0. I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a HP Ultra VGA 1280 monitor attached to the video card with a vga to dvi adapter I have not encountered this problem with either Hardy or Intrepid installations in the past + + + [lspci] + 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442] + Subsystem: Giga-byte Technology Device [1458:b000] -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
I've forwarded this bug upstream at https://bugs.freedesktop.org/show_bug.cgi?id=19802 . Could you please subscribe yourself to this bug, in case they need further information or wish you to test something. Thanks ahead of time! ** Bug watch added: freedesktop.org Bugzilla #19802 https://bugs.freedesktop.org/show_bug.cgi?id=19802 ** Also affects: xserver-xorg-driver-ati via https://bugs.freedesktop.org/show_bug.cgi?id=19802 Importance: Unknown Status: Unknown ** Changed in: xserver-xorg-video-ati (Ubuntu) Importance: Undecided = High Status: Incomplete = Triaged -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Changed in: xserver-xorg-driver-ati Status: Unknown = Confirmed -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Attachment added: Xorg.0.log http://launchpadlibrarian.net/21654455/Xorg.0.log -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. I also encountered a similar error when trying to use the livecd. After unsuccessfully trying to load up, I am sent to the terminal with an error code Output DVI-I_2/analog enabled but has no modes The only way of viewing the livecd or a proper installation was to go into low graphics mode (vesa) If I go into display settings, it comes up with Monitor: Unknown and a refresh rate of 0. I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a - HP Ultra VGA 1280 monitor attached to the video card with dvi to vga + HP Ultra VGA 1280 monitor attached to the video card with a vga to dvi + adapter I have not encountered this problem with either Hardy or Intrepid installations in the past -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
If you manage to get a logfile from it (/var/log/Xorg.0.log), please attach it to this bug. It should be in the live session, but perhaps a bit hard to copy elsewhere.. ** Changed in: xserver-xorg-video-ati (Ubuntu) Sourcepackagename: xorg = xserver-xorg-video-ati Status: New = Incomplete -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. I also encountered a similar error when trying to use the livecd. After unsuccessfully trying to load up, I am sent to the terminal with an error code Output DVI-I_2/analog enabled but has no modes The only way of viewing the livecd or a proper installation was to go into low graphics mode (vesa) + If I go into display settings, it comes up with Monitor: Unknown and a + refresh rate of 0. + I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a HP Ultra VGA 1280 monitor attached to the video card with dvi to vga I have not encountered this problem with either Hardy or Intrepid installations in the past -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Attachment added: dmesg http://launchpadlibrarian.net/21526447/dmesg -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Attachment added: lspci-vvnn http://launchpadlibrarian.net/21526450/lspci-vvnn ** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. I also encountered a similar error when trying to use the livecd. The only way of viewing the livecd or a proper installation was to go into low graphics mode (vesa) - Attac + I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a + HP Ultra VGA 1280 monitor attached to the video card with dvi to vga + adapter ** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. I also encountered a similar error when trying to use the livecd. The only way of viewing the livecd or a proper installation was to go into low graphics mode (vesa) I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a HP Ultra VGA 1280 monitor attached to the video card with dvi to vga - adapter + + I have not encountered this problem with either Hardy or Intrepid + installations in the past -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319930] Re: [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes
** Description changed: Binary package hint: xorg I encounter the error Radeon (0): Output DVI-0 enabled but has no modes when trying to boot into Jaunty using either the ati or Radeonhd drivers. - I also encountered a similar error when trying to use the livecd. The - only way of viewing the livecd or a proper installation was to go into - low graphics mode (vesa) + I also encountered a similar error when trying to use the livecd. After + unsuccessfully trying to load up, I am sent to the terminal with an + error code Output DVI-I_2/analog enabled but has no modes The only way + of viewing the livecd or a proper installation was to go into low + graphics mode (vesa) I am running Jaunty Alpha 3 AMD64, using a Ati Radeon 4850HD card with a HP Ultra VGA 1280 monitor attached to the video card with dvi to vga I have not encountered this problem with either Hardy or Intrepid installations in the past -- [Jaunty Alpha 3] Output DVI-I_2/analog enabled but has no modes https://bugs.launchpad.net/bugs/319930 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
