Public bug reported: I have a ZNYX ZX346Q quad-ethernet card with 4x21143-PD tulip chips, information and drivers here:
http://www.znyx.com/products/hardware/zx340q.htm The card does not work under Ubuntu Jaunty and Karmic, generating the following error on any attempt to use any of the interfaces on the card: 0000:06:04.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb3862002) Booting with "acpi=off" or "pci=routeirq" do not help. Relevant output from dmesg: [ 3.350167] tulip 0000:06:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.363415] tulip0: EEPROM default media type Autosense. [ 3.363423] tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [ 3.363428] tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [ 3.363434] tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. [ 3.363439] tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. [ 3.364535] eth0: RTL8168c/8111c at 0xf8372000, 00:24:1d:23:8d:5f, XID 3c4000c0 IRQ 29 [ 3.376923] eth1: Digital DS21142/43 Tulip rev 65 at Port 0xc000, 00:c0:95:e2:55:5c, IRQ 19. [ 3.377070] tulip 0000:06:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.387721] tulip1: EEPROM default media type Autosense. [ 3.387727] tulip1: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [ 3.387732] tulip1: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [ 3.387737] tulip1: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. [ 3.387743] tulip1: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. [ 3.399362] eth2: Digital DS21142/43 Tulip rev 65 at Port 0xc100, 00:c0:95:e2:55:5d, IRQ 18. [ 3.399498] tulip 0000:06:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.410237] tulip2: EEPROM default media type Autosense. [ 3.410242] tulip2: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [ 3.410248] tulip2: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [ 3.410253] tulip2: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. [ 3.410258] tulip2: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. [ 3.421987] eth3: Digital DS21142/43 Tulip rev 65 at Port 0xc200, 00:c0:95:e2:55:5e, IRQ 16. [ 3.422127] tulip 0000:06:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.432811] tulip3: EEPROM default media type Autosense. [ 3.432816] tulip3: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block. [ 3.432821] tulip3: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block. [ 3.432826] tulip3: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block. [ 3.432831] tulip3: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block. [ 3.445382] eth5: Digital DS21142/43 Tulip rev 65 at Port 0xc300, 00:c0:95:e2:55:5f, IRQ 20. [ 17.390277] udev: renamed network interface eth3 to eth4 [ 17.391436] udev: renamed network interface eth2 to eth3 [ 17.413232] udev: renamed network interface eth4_rename to eth1 [ 17.417373] udev: renamed network interface eth1_rename to eth2 [ 360.609527] 0000:06:04.0: tulip_stop_rxtx() failed (CSR5 0xf0660000 CSR6 0xb3862002) [ 366.609498] 0000:06:04.0: tulip_stop_rxtx() failed (CSR5 0xf0260000 CSR6 0xb3862002) mii-diag reports: Basic registers of MII PHY #32: 1000 7848 0000 0000 01e1 0000 0000 0000. Basic mode control register 0x1000: Auto-negotiation enabled. Basic mode status register 0x7848 ... 7848. Link status: not established. End of basic transceiver information. ProblemType: Bug Architecture: i386 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: xanni 2320 F.... pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xeb200000 irq 22' Mixer name : 'Realtek ALC889A' Components : 'HDA:10ec0885,1458a102,00100101' Controls : 44 Simple ctrls : 25 Card1.Amixer.info: Card hw:1 'HDMI'/'HDA ATI HDMI at 0xe5010000 irq 17' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100100' Controls : 4 Simple ctrls : 1 Card1.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Date: Mon Dec 28 18:40:10 2009 DistroRelease: Ubuntu 9.10 HibernationDevice: RESUME=UUID=147f98d5-bcf6-498f-aa5a-262c04f1184e MachineType: Gigabyte Technology Co., Ltd. EP45-UD3R Package: linux-image-2.6.31-16-generic 2.6.31-16.53 ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.31-16-generic root=/dev/mapper/volgroup-karmic ro splash ProcEnviron: LANG=en_AU.UTF-8 SHELL=/bin/bash ProcVersionSignature: Ubuntu 2.6.31-16.53-generic RelatedPackageVersions: linux-backports-modules-2.6.31-16-generic N/A linux-firmware 1.25 RfKill: SourcePackage: linux Uname: Linux 2.6.31-16-generic i686 dmi.bios.date: 01/13/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F6 dmi.board.name: EP45-UD3R dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF6:bd01/13/2009:svnGigabyteTechnologyCo.,Ltd.:pnEP45-UD3R:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnEP45-UD3R:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: EP45-UD3R dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 -- "tulip_stop_rxtx() failed" on quad tulip card ZX346Q https://bugs.launchpad.net/bugs/500963 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
